openwrt-owl/target/linux/lantiq/dts/ARV7525PW.dts

/dts-v1/;

#include "danube.dtsi"

/ {
	model = "ARV7525PW - Speedport W303V Typ A";

	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	aliases {
		led-boot = &power_green;
		led-failsafe = &power_red;
		led-running = &power_green;

		led-dsl = &power_green;
		led-internet = &online;
		led-wifi = &wifi;
	};

	memory@0 {
		reg = <0x0 0x2000000>;
	};

	sram@1F000000 {
		vmmc@107000 {
			status = "okay";
			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
		};
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x2000000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					partition@0 {
						label = "uboot";
						reg = <0x00000 0x10000>;
						read-only;
					};

					partition@10000 {
						label = "uboot_env";
						reg = <0x10000 0x10000>;
						read-only;
					};

					partition@20000 {
						label = "firmware";
						reg = <0x20000 0x3d0000>;
					};

					boardconfig: partition@400000 {
						label = "board_config";
						reg = <0x3f0000 0x10000>;
						read-only;
					};
				};
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				exin {
					lantiq,groups = "exin1";
					lantiq,function = "exin";
				};
				pci {
					lantiq,groups = "gnt1", "req1";
					lantiq,function = "pci";
				};
			};
		};

		etop@E180000 {
			phy-mode = "mii";
			mtd-mac-address = <&boardconfig 0x16>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		wps {
			label = "wps";
			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
		reset {
			label = "reset";
			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		power_green: power {
			label = "arv7525pw:green:power";
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		power_red: power1 {
			label = "arv7525pw:red:power";
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
		};
		online: online {
			label = "arv7525pw:green:online";
			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
		};
		voice {
			label = "arv7525pw:green:telefonie";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
		};
		voice2 {
			label = "arv7525pw:red:telefonie";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
		};
		wifi: wifi {
			label = "arv7525pw:green:wlan";
			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
		};
	};
};

&pci0 {
	status = "okay";
	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;

	wifi@0,0 {
		compatible = "pci0,0";
		reg = <0x7000 0 0 0 0>;
		ralink,mtd-eeprom = <&boardconfig 0x410>;
	};
};