Voltage Glitching with Crowbars

docs/side-channel/fault-injection.md

@@ -1,10 +1,48 @@
 # Fault Injection
 
-## Power / VCC Glitch
+## Power / VCC - Voltage Glitch
 
 Power glitch injection is a physical attack technique used to test and exploit vulnerabilities in electronic devices by causing controlled, temporary power disturbances.
 A VCC glitch, also known as a supply voltage glitch, is a specific type of power glitch attack targeting the voltage supply (VCC) of a microcontroller or integrated circuit (IC) in electronic devices.
 
+Most of the time the goal is one of the following:
+
+* Re-enable debugging features (e.g: Trezor One wallet)
+* Bypass secure boot
+* Gain code-execution by glitching memcpy
+
+
+**Tools**
+
+* [Faultier](https://1bitsquared.de/products/faultier) [FW](https://github.com/hextreeio/faultier/releases/tag/0.1.32)
+* [PicoGlitcher v1.1](https://www.tindie.com/products/faulty-hardware/picoglitcher-v11/)
+* [HydraBus](https://hydrabus.com/shop/)
+* [ChipWhisperer-Pro](https://rtfm.newae.com/Capture/ChipWhisperer-Pro/)
+* [ChipWhisperer-Husky](https://rtfm.newae.com/Capture/ChipWhisperer-Husky/)
+
+
+**Voltage Glitching with Crowbars**
+
+```py
+import faultier
+import serial
+
+ft = faultier.Faultier()
+ser = serial.Serial(ft.get_serial_path(), baudrate=115200)
+ser.timeout = 0.3
+
+ft.configure_glitcher(
+    trigger_source = faultier.TRIGGER_IN_EXT0,
+    trigger_type = faultier.TRIGGER_PULSE_POSITIVE
+    glitch_output = faultier.OUT_CROWBAR
+)
+ft.glitch(delay = 1000, pulse = 1)
+print(ser.read(3))
+```
+
+
+**Challenges**
+
 * [Fiasco - Riscure Hardware CTF 2016](https://github.com/hydrabus/rhme-2016/blob/master/FaultInjection/Fiasco.md) - solved using HydraBus + Custom Board with MOSFET
     ```ps1
     gpio glitch trigger PB0 pin PC15 length 100 offsets 191200
@@ -13,6 +51,7 @@ A VCC glitch, also known as a supply voltage glitch, is a specific type of power
 
 * [Hardware Power Glitch Attack (Fault Injection) - rhme2 Fiesta (FI 100)](https://youtu.be/6Pf3pY3GxBM) - solved using a [custom code](https://gist.github.com/LiveOverflow/cad0e905691ab5a8a2474d483a604d67) running on a Xilinx FPGA
 * [AVR Glitch: Modifying Code Execution Paths Using Only Voltage](https://flawed.net.nz/2017/01/29/avr-glitch-modifying-code-execution-paths-using-only-voltage/)
+* [Hextree Glitch Tag](https://1bitsquared.de/products/glitch-tag) - The Hextree GlitchTag is a "totally not AirTag inspired" board for the nRF52832 microcontroller. It is intended as a target for the Hextree Faultier. It gives access to all pins that you need to learn basic fault-injection, including glitch characterization and so on. It also allows you to reproduce LimitedResult's APPROTECT bypass (that was also used to hack the AirTags) without needing to microsolder!
 
 
 ## Electromagnetic Fault
@@ -24,7 +63,7 @@ Electromagnetic Fault Injection is an advanced technique used in hardware securi
 * Create a custom Electromagnetic fault injection tool: [Dirt cheap Electromagnetic Fault Injection](https://pedro-javierf.github.io/devblog/dirtcheapemfaultinjection/)
 
 
-**Challenges**    
+**Challenges**
 
 * [Fiesta - Riscure Hardware CTF 2016 - pedro-javierf](https://pedro-javierf.github.io/devblog/rhmefaultinjection/) - solved using a custom EMFI
 
@@ -33,7 +72,7 @@ Electromagnetic Fault Injection is an advanced technique used in hardware securi
 
 This technique involves momentarily disrupting or altering the clock signal of a device to induce errors or malfunctions in its operation.
 
-**Challenges**    
+**Challenges**
 
 * [Fiesta - Riscure Hardware CTF 2016 - jcldf](https://twitter.com/jcldf/status/1235859271176171521) - solved using a clock glitch
 
@@ -59,4 +98,7 @@ Here is a practical example, putting a cable between MOSI and Chip Select :
 * [Solving rhme fiesta from Riscure Hardware CTF 2016 with EM Fault Injection - Dangling Pointr - 2020, Oct 11](https://pedro-javierf.github.io/devblog/rhmefaultinjection/)
 * [Hardware Power Glitch Attack (Fault Injection) - rhme2 Fiesta (FI 100) - LiveOverflow -  16 june 2017](https://www.youtube.com/watch?v=6Pf3pY3GxBM)
 * [pin2pwn: How to Root an Embedded Linux Box with a Sewing Needle - Brad Dixon - Carve Systems - DEFCON 24](https://media.defcon.org/DEF%20CON%2024/DEF%20CON%2024%20presentations/DEF%20CON%2024%20-%20Brad-Dixon-Pin2Pwn-How-to-Root-An-Embedded-Linux-Box-With-A-Sewing-Needle-UPDATED.pdf)
-* [Replicant: Reproducing a Fault Injection Attack on the Trezor One - Voidstar - AUGUST 2022](https://voidstarsec.com/blog/replicant-part-1)
+* [Replicant: Reproducing a Fault Injection Attack on the Trezor One - Voidstar - AUGUST 2022](https://voidstarsec.com/blog/replicant-part-1)
+* [Your first Glitch/Voltage Fault Injection - hextree.io](https://app.hextree.io/courses/fault-injection-introduction/fault-injection-theory)
+* [PicoGlitcher PCB - A dirt chip fault-injection device](https://mkesenheimer.github.io/blog/pico-glitcher-pcb.html)
+* [Fault Injection using Crowbars on Embedded Systems - Colin O'Flynn](https://eprint.iacr.org/2016/810.pdf)