require 'formula' class Denyhosts < Formula homepage 'http://denyhosts.sourceforge.net/' url 'http://downloads.sourceforge.net/project/denyhosts/denyhosts/2.6/DenyHosts-2.6.tar.gz' sha1 '02143843cb7c37c986c222b7acc11f7b75eb7373' # Copies of daemon-control-dist & denyhosts.cfg-dist edited for OS X. def patches; DATA; end def install # If the `libpath` is relative, instead of absolute, we can influence the # 'data path' via command line arguments to `setup.py`. inreplace 'setup.py' do |s| s.change_make_var! 'libpath', "''" s.change_make_var! 'scriptspath', "''" s.change_make_var! 'pluginspath', "''" end # Make it so that all DenyHosts tools have a default path that points at # our config file. inreplace 'DenyHosts/constants.py' do |s| s.change_make_var! 'CONFIG_FILE', "'#{etc}/denyhosts.cfg'" end # Install mostly into libexec (a la Duplicity) system "python", "setup.py", "install", "--prefix=#{prefix}", "--install-lib=#{libexec}", "--install-scripts=#{libexec}", "--install-data=#{libexec}" libexec.install 'daemon-control' (libexec+'daemon-control').chmod 0755 # Don't overwrite the config file; the user may have tweaked it. etc.install 'denyhosts.cfg' unless (etc + 'denyhosts.cfg').exist? sbin.install_symlink libexec+'daemon-control' sbin.install_symlink libexec+'denyhosts.py' => 'denyhosts' end plist_options :startup => true def plist; <<-EOS.undent Label #{plist_name} ProgramArguments #{opt_prefix}/sbin/denyhosts RunAtLoad KeepAlive StartInterval 600 EOS end def caveats; <<-EOS.undent Unless it exists already, a denyhosts.cfg file has been written to: #{etc}/denyhosts.cfg All DenyHosts scripts will load this file by default unless told to use a different one. EOS end end __END__ diff --git a/daemon-control b/daemon-control new file mode 100755 index 0000000..3e38437 --- /dev/null +++ b/daemon-control @@ -0,0 +1,156 @@ +#!/usr/bin/env python +# denyhosts Bring up/down the DenyHosts daemon +# +# chkconfig: 2345 98 02 +# description: Activates/Deactivates the +# DenyHosts daemon to block ssh attempts +# +############################################### + +############################################### +#### Edit these to suit your configuration #### +############################################### + +DENYHOSTS_BIN = "/usr/local/sbin/denyhosts" +DENYHOSTS_LOCK = "/usr/local/var/run/denyhosts.pid" +DENYHOSTS_CFG = "/usr/local/etc/denyhosts.cfg" + +PYTHON_BIN = "/usr/bin/env python" + +############################################### +#### Do not edit below #### +############################################### + +DENYHOSTS_BIN = "%s %s" % (PYTHON_BIN, DENYHOSTS_BIN) + +import os, sys, signal, time + +# make sure 'ps' command is accessible (which should be +# in either /usr/bin or /bin. Modify the PATH so +# popen can find it +env = os.environ.get('PATH', "") +os.environ['PATH'] = "/usr/bin:/bin:%s" % env + +STATE_NOT_RUNNING = -1 +STATE_LOCK_EXISTS = -2 + +def usage(): + print "Usage: %s {start [args...] | stop | restart [args...] | status | debug | condrestart [args...] }" % sys.argv[0] + print + print "For a list of valid 'args' refer to:" + print "$ denyhosts.py --help" + print + sys.exit(0) + + +def getpid(): + try: + fp = open(DENYHOSTS_LOCK, "r") + pid = int(fp.readline().rstrip()) + fp.close() + except Exception, e: + return STATE_NOT_RUNNING + + + if not sys.platform.startswith('freebsd') and os.access("/proc", os.F_OK): + # proc filesystem exists, look for pid + if os.access(os.path.join("/proc", str(pid)), os.F_OK): + return pid + else: + return STATE_LOCK_EXISTS + else: + # proc filesystem doesn't exist (or it doesn't contain PIDs), use 'ps' + p = os.popen("ps -p %d" % pid, "r") + p.readline() # get the header line + pid_running = p.readline() + # pid_running will be '' if no process is found + if pid_running: + return pid + else: + return STATE_LOCK_EXISTS + + +def start(*args): + cmd = "%s --daemon " % DENYHOSTS_BIN + if args: cmd += ' '.join(args) + + print "starting DenyHosts: ", cmd + + os.system(cmd) + + +def stop(): + pid = getpid() + if pid >= 0: + os.kill(pid, signal.SIGTERM) + print "sent DenyHosts SIGTERM" + else: + print "DenyHosts is not running" + +def debug(): + pid = getpid() + if pid >= 0: + os.kill(pid, signal.SIGUSR1) + print "sent DenyHosts SIGUSR1" + else: + print "DenyHosts is not running" + +def status(): + pid = getpid() + if pid == STATE_LOCK_EXISTS: + print "%s exists but DenyHosts is not running" % DENYHOSTS_LOCK + elif pid == STATE_NOT_RUNNING: + print "Denyhosts is not running" + else: + print "DenyHosts is running with pid = %d" % pid + + +def condrestart(*args): + pid = getpid() + if pid >= 0: + restart(*args) + + +def restart(*args): + stop() + time.sleep(1) + start(*args) + + +if __name__ == '__main__': + cases = {'start': start, + 'stop': stop, + 'debug': debug, + 'status': status, + 'condrestart': condrestart, + 'restart': restart} + + try: + args = sys.argv[2:] + except: + args = [] + + try: + # arg 1 should contain one of the cases above + option = sys.argv[1] + except: + # try to infer context (from an /etc/init.d/ script, perhaps) + procname = os.path.basename(sys.argv[0]) + infer_dict = {'K': 'stop', + 'S': 'start'} + option = infer_dict.get(procname[0]) + if not option: + usage() + + try: + if option in ('start', 'restart', 'condrestart'): + if '--config' not in args and '-c' not in args: + args.append("--config=%s" % DENYHOSTS_CFG) + + cmd = cases[option] + apply(cmd, args) + except: + usage() + + + diff --git a/denyhosts.cfg b/denyhosts.cfg new file mode 100644 index 0000000..a140844 --- /dev/null +++ b/denyhosts.cfg @@ -0,0 +1,620 @@ + ############ THESE SETTINGS ARE REQUIRED ############ + +######################################################################## +# +# SECURE_LOG: the log file that contains sshd logging info +# if you are not sure, grep "sshd:" /var/log/* +# +# The file to process can be overridden with the --file command line +# argument +# +# Redhat or Fedora Core: +# SECURE_LOG = /var/log/secure +# +# Mandrake, FreeBSD or OpenBSD: +#SECURE_LOG = /var/log/auth.log +# +# SuSE: +#SECURE_LOG = /var/log/messages +# +# Mac OS X (v10.4 or greater - +# also refer to: http://www.denyhosts.net/faq.html#macos +SECURE_LOG = /private/var/log/secure.log +# +# Mac OS X (v10.3 or earlier): +#SECURE_LOG=/private/var/log/system.log +# +######################################################################## + +######################################################################## +# +# HOSTS_DENY: the file which contains restricted host access information +# +# Most operating systems: +HOSTS_DENY = /etc/hosts.deny +# +# Some BSD (FreeBSD) Unixes: +#HOSTS_DENY = /etc/hosts.allow +# +# Another possibility (also see the next option): +#HOSTS_DENY = /etc/hosts.evil +####################################################################### + + +######################################################################## +# +# PURGE_DENY: removed HOSTS_DENY entries that are older than this time +# when DenyHosts is invoked with the --purge flag +# +# format is: i[dhwmy] +# Where 'i' is an integer (eg. 7) +# 'm' = minutes +# 'h' = hours +# 'd' = days +# 'w' = weeks +# 'y' = years +# +# never purge: +PURGE_DENY = +# +# purge entries older than 1 week +#PURGE_DENY = 1w +# +# purge entries older than 5 days +#PURGE_DENY = 5d +####################################################################### + +####################################################################### +# +# PURGE_THRESHOLD: defines the maximum times a host will be purged. +# Once this value has been exceeded then this host will not be purged. +# Setting this parameter to 0 (the default) disables this feature. +# +# default: a denied host can be purged/re-added indefinitely +#PURGE_THRESHOLD = 0 +# +# a denied host will be purged at most 2 times. +#PURGE_THRESHOLD = 2 +# +####################################################################### + + +####################################################################### +# +# BLOCK_SERVICE: the service name that should be blocked in HOSTS_DENY +# +# man 5 hosts_access for details +# +# eg. sshd: 127.0.0.1 # will block sshd logins from 127.0.0.1 +# +# To block all services for the offending host: +BLOCK_SERVICE = ALL +# To block only sshd: +# BLOCK_SERVICE = sshd +# To only record the offending host and nothing else (if using +# an auxilary file to list the hosts). Refer to: +# http://denyhosts.sourceforge.net/faq.html#aux +#BLOCK_SERVICE = +# +####################################################################### + + +####################################################################### +# +# DENY_THRESHOLD_INVALID: block each host after the number of failed login +# attempts has exceeded this value. This value applies to invalid +# user login attempts (eg. non-existent user accounts) +# +DENY_THRESHOLD_INVALID = 5 +# +####################################################################### + +####################################################################### +# +# DENY_THRESHOLD_VALID: block each host after the number of failed +# login attempts has exceeded this value. This value applies to valid +# user login attempts (eg. user accounts that exist in /etc/passwd) except +# for the "root" user +# +DENY_THRESHOLD_VALID = 10 +# +####################################################################### + +####################################################################### +# +# DENY_THRESHOLD_ROOT: block each host after the number of failed +# login attempts has exceeded this value. This value applies to +# "root" user login attempts only. +# +DENY_THRESHOLD_ROOT = 1 +# +####################################################################### + + +####################################################################### +# +# DENY_THRESHOLD_RESTRICTED: block each host after the number of failed +# login attempts has exceeded this value. This value applies to +# usernames that appear in the WORK_DIR/restricted-usernames file only. +# +DENY_THRESHOLD_RESTRICTED = 1 +# +####################################################################### + + +####################################################################### +# +# WORK_DIR: the path that DenyHosts will use for writing data to +# (it will be created if it does not already exist). +# +# Note: it is recommended that you use an absolute pathname +# for this value (eg. /home/foo/denyhosts/data) +# +WORK_DIR = /usr/local/var/denyhosts +# +####################################################################### + +####################################################################### +# +# SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS +# +# SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS=YES|NO +# If set to YES, if a suspicious login attempt results from an allowed-host +# then it is considered suspicious. If this is NO, then suspicious logins +# from allowed-hosts will not be reported. All suspicious logins from +# ip addresses that are not in allowed-hosts will always be reported. +# +SUSPICIOUS_LOGIN_REPORT_ALLOWED_HOSTS=YES +###################################################################### + +###################################################################### +# +# HOSTNAME_LOOKUP +# +# HOSTNAME_LOOKUP=YES|NO +# If set to YES, for each IP address that is reported by Denyhosts, +# the corresponding hostname will be looked up and reported as well +# (if available). +# +HOSTNAME_LOOKUP=YES +# +###################################################################### + + +###################################################################### +# +# LOCK_FILE +# +# LOCK_FILE=/path/denyhosts +# If this file exists when DenyHosts is run, then DenyHosts will exit +# immediately. Otherwise, this file will be created upon invocation +# and deleted upon exit. This ensures that only one instance is +# running at a time. +# +# Redhat/Fedora: +#LOCK_FILE = /var/lock/subsys/denyhosts +# +# Debian +#LOCK_FILE = /var/run/denyhosts.pid +# +# Misc +LOCK_FILE = /usr/local/var/run/denyhosts.pid +# +###################################################################### + + + ############ THESE SETTINGS ARE OPTIONAL ############ + + +####################################################################### +# +# ADMIN_EMAIL: if you would like to receive emails regarding newly +# restricted hosts and suspicious logins, set this address to +# match your email address. If you do not want to receive these reports +# leave this field blank (or run with the --noemail option) +# +# Multiple email addresses can be delimited by a comma, eg: +# ADMIN_EMAIL = foo@bar.com, bar@foo.com, etc@foobar.com +# +ADMIN_EMAIL = +# +####################################################################### + +####################################################################### +# +# SMTP_HOST and SMTP_PORT: if DenyHosts is configured to email +# reports (see ADMIN_EMAIL) then these settings specify the +# email server address (SMTP_HOST) and the server port (SMTP_PORT) +# +# +SMTP_HOST = localhost +SMTP_PORT = 25 +# +####################################################################### + +####################################################################### +# +# SMTP_USERNAME and SMTP_PASSWORD: set these parameters if your +# smtp email server requires authentication +# +#SMTP_USERNAME=foo +#SMTP_PASSWORD=bar +# +###################################################################### + +####################################################################### +# +# SMTP_FROM: you can specify the "From:" address in messages sent +# from DenyHosts when it reports thwarted abuse attempts +# +SMTP_FROM = DenyHosts +# +####################################################################### + +####################################################################### +# +# SMTP_SUBJECT: you can specify the "Subject:" of messages sent +# by DenyHosts when it reports thwarted abuse attempts +SMTP_SUBJECT = DenyHosts Report +# +###################################################################### + +###################################################################### +# +# SMTP_DATE_FORMAT: specifies the format used for the "Date:" header +# when sending email messages. +# +# for possible values for this parameter refer to: man strftime +# +# the default: +# +#SMTP_DATE_FORMAT = %a, %d %b %Y %H:%M:%S %z +# +###################################################################### + +###################################################################### +# +# SYSLOG_REPORT +# +# SYSLOG_REPORT=YES|NO +# If set to yes, when denied hosts are recorded the report data +# will be sent to syslog (syslog must be present on your system). +# The default is: NO +# +#SYSLOG_REPORT=NO +# +#SYSLOG_REPORT=YES +# +###################################################################### + +###################################################################### +# +# ALLOWED_HOSTS_HOSTNAME_LOOKUP +# +# ALLOWED_HOSTS_HOSTNAME_LOOKUP=YES|NO +# If set to YES, for each entry in the WORK_DIR/allowed-hosts file, +# the hostname will be looked up. If your versions of tcp_wrappers +# and sshd sometimes log hostnames in addition to ip addresses +# then you may wish to specify this option. +# +#ALLOWED_HOSTS_HOSTNAME_LOOKUP=NO +# +###################################################################### + +###################################################################### +# +# AGE_RESET_VALID: Specifies the period of time between failed login +# attempts that, when exceeded will result in the failed count for +# this host to be reset to 0. This value applies to login attempts +# to all valid users (those within /etc/passwd) with the +# exception of root. If not defined, this count will never +# be reset. +# +# See the comments in the PURGE_DENY section (above) +# for details on specifying this value or for complete details +# refer to: http://denyhosts.sourceforge.net/faq.html#timespec +# +AGE_RESET_VALID=5d +# +###################################################################### + +###################################################################### +# +# AGE_RESET_ROOT: Specifies the period of time between failed login +# attempts that, when exceeded will result in the failed count for +# this host to be reset to 0. This value applies to all login +# attempts to the "root" user account. If not defined, +# this count will never be reset. +# +# See the comments in the PURGE_DENY section (above) +# for details on specifying this value or for complete details +# refer to: http://denyhosts.sourceforge.net/faq.html#timespec +# +AGE_RESET_ROOT=25d +# +###################################################################### + +###################################################################### +# +# AGE_RESET_RESTRICTED: Specifies the period of time between failed login +# attempts that, when exceeded will result in the failed count for +# this host to be reset to 0. This value applies to all login +# attempts to entries found in the WORK_DIR/restricted-usernames file. +# If not defined, the count will never be reset. +# +# See the comments in the PURGE_DENY section (above) +# for details on specifying this value or for complete details +# refer to: http://denyhosts.sourceforge.net/faq.html#timespec +# +AGE_RESET_RESTRICTED=25d +# +###################################################################### + + +###################################################################### +# +# AGE_RESET_INVALID: Specifies the period of time between failed login +# attempts that, when exceeded will result in the failed count for +# this host to be reset to 0. This value applies to login attempts +# made to any invalid username (those that do not appear +# in /etc/passwd). If not defined, count will never be reset. +# +# See the comments in the PURGE_DENY section (above) +# for details on specifying this value or for complete details +# refer to: http://denyhosts.sourceforge.net/faq.html#timespec +# +AGE_RESET_INVALID=10d +# +###################################################################### + + +###################################################################### +# +# RESET_ON_SUCCESS: If this parameter is set to "yes" then the +# failed count for the respective ip address will be reset to 0 +# if the login is successful. +# +# The default is RESET_ON_SUCCESS = no +# +#RESET_ON_SUCCESS = yes +# +##################################################################### + + +###################################################################### +# +# PLUGIN_DENY: If set, this value should point to an executable +# program that will be invoked when a host is added to the +# HOSTS_DENY file. This executable will be passed the host +# that will be added as it's only argument. +# +#PLUGIN_DENY=/usr/bin/true +# +###################################################################### + + +###################################################################### +# +# PLUGIN_PURGE: If set, this value should point to an executable +# program that will be invoked when a host is removed from the +# HOSTS_DENY file. This executable will be passed the host +# that is to be purged as it's only argument. +# +#PLUGIN_PURGE=/usr/bin/true +# +###################################################################### + +###################################################################### +# +# USERDEF_FAILED_ENTRY_REGEX: if set, this value should contain +# a regular expression that can be used to identify additional +# hackers for your particular ssh configuration. This functionality +# extends the built-in regular expressions that DenyHosts uses. +# This parameter can be specified multiple times. +# See this faq entry for more details: +# http://denyhosts.sf.net/faq.html#userdef_regex +# +#USERDEF_FAILED_ENTRY_REGEX= +# +# +###################################################################### + + + + + ######### THESE SETTINGS ARE SPECIFIC TO DAEMON MODE ########## + + + +####################################################################### +# +# DAEMON_LOG: when DenyHosts is run in daemon mode (--daemon flag) +# this is the logfile that DenyHosts uses to report it's status. +# To disable logging, leave blank. (default is: /var/log/denyhosts) +# +DAEMON_LOG = /usr/local/var/log/denyhosts.log +# +# disable logging: +#DAEMON_LOG = +# +###################################################################### + +####################################################################### +# +# DAEMON_LOG_TIME_FORMAT: when DenyHosts is run in daemon mode +# (--daemon flag) this specifies the timestamp format of +# the DAEMON_LOG messages (default is the ISO8061 format: +# ie. 2005-07-22 10:38:01,745) +# +# for possible values for this parameter refer to: man strftime +# +# Jan 1 13:05:59 +#DAEMON_LOG_TIME_FORMAT = %b %d %H:%M:%S +# +# Jan 1 01:05:59 +#DAEMON_LOG_TIME_FORMAT = %b %d %I:%M:%S +# +###################################################################### + +####################################################################### +# +# DAEMON_LOG_MESSAGE_FORMAT: when DenyHosts is run in daemon mode +# (--daemon flag) this specifies the message format of each logged +# entry. By default the following format is used: +# +# %(asctime)s - %(name)-12s: %(levelname)-8s %(message)s +# +# Where the "%(asctime)s" portion is expanded to the format +# defined by DAEMON_LOG_TIME_FORMAT +# +# This string is passed to python's logging.Formatter contstuctor. +# For details on the possible format types please refer to: +# http://docs.python.org/lib/node357.html +# +# This is the default: +#DAEMON_LOG_MESSAGE_FORMAT = %(asctime)s - %(name)-12s: %(levelname)-8s %(message)s +# +# +###################################################################### + + +####################################################################### +# +# DAEMON_SLEEP: when DenyHosts is run in daemon mode (--daemon flag) +# this is the amount of time DenyHosts will sleep between polling +# the SECURE_LOG. See the comments in the PURGE_DENY section (above) +# for details on specifying this value or for complete details +# refer to: http://denyhosts.sourceforge.net/faq.html#timespec +# +# +DAEMON_SLEEP = 30s +# +####################################################################### + +####################################################################### +# +# DAEMON_PURGE: How often should DenyHosts, when run in daemon mode, +# run the purge mechanism to expire old entries in HOSTS_DENY +# This has no effect if PURGE_DENY is blank. +# +DAEMON_PURGE = 1h +# +####################################################################### + + + ######### THESE SETTINGS ARE SPECIFIC TO ########## + ######### DAEMON SYNCHRONIZATION ########## + + +####################################################################### +# +# Synchronization mode allows the DenyHosts daemon the ability +# to periodically send and receive denied host data such that +# DenyHosts daemons worldwide can automatically inform one +# another regarding banned hosts. This mode is disabled by +# default, you must uncomment SYNC_SERVER to enable this mode. +# +# for more information, please refer to: +# http:/denyhosts.sourceforge.net/faq.html#sync +# +####################################################################### + + +####################################################################### +# +# SYNC_SERVER: The central server that communicates with DenyHost +# daemons. Currently, denyhosts.net is the only available server +# however, in the future, it may be possible for organizations to +# install their own server for internal network synchronization +# +# To disable synchronization (the default), do nothing. +# +# To enable synchronization, you must uncomment the following line: +#SYNC_SERVER = http://xmlrpc.denyhosts.net:9911 +# +####################################################################### + +####################################################################### +# +# SYNC_INTERVAL: the interval of time to perform synchronizations if +# SYNC_SERVER has been uncommented. The default is 1 hour. +# +#SYNC_INTERVAL = 1h +# +####################################################################### + + +####################################################################### +# +# SYNC_UPLOAD: allow your DenyHosts daemon to transmit hosts that have +# been denied? This option only applies if SYNC_SERVER has +# been uncommented. +# The default is SYNC_UPLOAD = yes +# +#SYNC_UPLOAD = no +#SYNC_UPLOAD = yes +# +####################################################################### + + +####################################################################### +# +# SYNC_DOWNLOAD: allow your DenyHosts daemon to receive hosts that have +# been denied by others? This option only applies if SYNC_SERVER has +# been uncommented. +# The default is SYNC_DOWNLOAD = yes +# +#SYNC_DOWNLOAD = no +#SYNC_DOWNLOAD = yes +# +# +# +####################################################################### + +####################################################################### +# +# SYNC_DOWNLOAD_THRESHOLD: If SYNC_DOWNLOAD is enabled this parameter +# filters the returned hosts to those that have been blocked this many +# times by others. That is, if set to 1, then if a single DenyHosts +# server has denied an ip address then you will receive the denied host. +# +# See also SYNC_DOWNLOAD_RESILIENCY +# +#SYNC_DOWNLOAD_THRESHOLD = 10 +# +# The default is SYNC_DOWNLOAD_THRESHOLD = 3 +# +#SYNC_DOWNLOAD_THRESHOLD = 3 +# +####################################################################### + +####################################################################### +# +# SYNC_DOWNLOAD_RESILIENCY: If SYNC_DOWNLOAD is enabled then the +# value specified for this option limits the downloaded data +# to this resiliency period or greater. +# +# Resiliency is defined as the timespan between a hackers first known +# attack and it's most recent attack. Example: +# +# If the centralized denyhosts.net server records an attack at 2 PM +# and then again at 5 PM, specifying a SYNC_DOWNLOAD_RESILIENCY = 4h +# will not download this ip address. +# +# However, if the attacker is recorded again at 6:15 PM then the +# ip address will be downloaded by your DenyHosts instance. +# +# This value is used in conjunction with the SYNC_DOWNLOAD_THRESHOLD +# and only hosts that satisfy both values will be downloaded. +# This value has no effect if SYNC_DOWNLOAD_THRESHOLD = 1 +# +# The default is SYNC_DOWNLOAD_RESILIENCY = 5h (5 hours) +# +# Only obtain hackers that have been at it for 2 days or more: +#SYNC_DOWNLOAD_RESILIENCY = 2d +# +# Only obtain hackers that have been at it for 5 hours or more: +#SYNC_DOWNLOAD_RESILIENCY = 5h +# +####################################################################### +