betaflight-configurator/changelog.html

<span>xx.xx.2014 - 0.57</span>
<p>
    - Firmware flasher now contains firmware builds picker<br />
    - Implemented new and experimental review mechanism<br />
    - Support for new A-tail Quad craft type<br />
    - Firmware flasher flashing speed optimizations<br />
    - Major bugfix for stuck UI after delayed port open procedure<br />
    - Fix for GPS distance to home not displaying<br />
</p>
<span>04.11.2014 - 0.56</span>
<p>
    - Added hex plus, hex X, tri, y4, y6 3D models (jef79m)<br />
    - Bugfix for battery voltage saving sequence<br />
    - Bugfix for fetching development firmware<br />
</p>
<span>31.10.2014 - 0.55</span>
<p>
    - Minimum required Chrome version set to 38+<br />
    - Minimum accepted firmware version set to 2.31<br />
    - Support for flashing development firmware<br />
    - Setup tab performance improvements, faster 3D model<br />
    - Strongly improved amount of data stored in backups<br />
    - Improved flash on connect in firmware flasher<br />
    - Rearranged texts and options in firmware flasher<br />
    - Bugfix for corrupted minimum window size on Windows 7<br />
    - Bugfix for incorrect date &amp; time in firmware flasher<br />
    - Bugfix for port handler firing before port being initialized<br />
</p>
<span>06.10.2014 - 0.54</span>
<p>
    - Backup files now also contain servo settings<br />
    - Pre 0.54 backup files are incompatible, save new ones<br />
    - Bugfixes<br />
</p>
<span>30.09.2014 - 0.53</span>
<p>
    - Enhanced 3D model (creyc)<br />
    - Fallback 3D model for canvas renderer (creyc)<br />
    - More predefined options for channel map<br />
    - Display motor/servo signal value inside the bars<br />
    - Bugfixes<br />
</p>
<span>29.09.2014 - 0.52</span>
<p>
    - We recommend upgrading to the <strong>latest firmware</strong><br />
    - Simplified Initial Setup tab and renamed it to Setup<br />
    - Renamed Auxiliary Configuration to Mode selection<br />
    - Implemented new Configuration tab (check it out)<br />
    - Simplified meter UI in Receiver tab<br />
    - Channel Map is now configurable in Receiver tab<br />
    - Using new "real" 3D renderer for the 3D model<br />
    - 3D model for Quad X (creyc)<br />
    - Additional motor order diagrams (creyc)<br />
    - Updated MSP layer with new custom Baseflight commands<br />
    - Various optimizations and bugfixes<br />
</p>
<span>09.09.2014 - 0.51</span>
<p>
    - Configurator userbase is over 9000 now :-)<br />
    - Small global UI revamp to utilize space little bit better<br />
    - Online Firmware can be saved locally<br />
    - Added missing model information for custom model<br />
</p>
<span>31.08.2014 - 0.50</span>
<p>
    - Small UI revamp for Firmware Flasher<br />
    - Added "Flash slowly" mode (bluetooth friendly)<br />
    - Bugfixes<br />
</p>
<span>18.08.2014 - 0.49</span>
<p>
    - Motor indicators now display signal length in tooltips<br />
    - Additional motor order diagrams (creyc)<br />
    - Bugfixes<br />
</p>
<span>27.07.2014 - 0.48</span>
<p>
    - Configurator reached 6000+ users on 26.07.2014<br />
    - Added motor order diagrams (creyc, Curtisbeef)<br />
    - Flashing timeout bugfixes<br />
</p>
<span>17.07.2014 - 0.47</span>
<p>
    - Bugfixes related to Chrome 36+ release<br />
    - Various optimizations and behavior improvements<br />
</p>
<span>11.07.2014 - 0.46</span>
<p>
    - Application will display a spinner while waiting for data<br />
    - Bugfixes<br />
</p>
<span>04.07.2014 - 0.45</span>
<p>
    - Configurator reached 5000+ users on 03.07.2014<br />
    - Updated various text notes to make things clearer<br />
    - UI polish<br />
    - Various bugfixes<br />
</p>
<span>27.06.2014 - 0.44</span>
<p>
    - Added more scale factors in the motor testing tab<br />
    - If application closes without disconnecting motors should spin down<br />
    - Bugfixes for CLI, Motor Testing &amp; Logging tabs<br />
</p>
<span>26.06.2014 - 0.43</span>
<p>
    - Experimental passthrough support for logging<br />
    - MSP_ANALOG support for logging<br />
    - Allow running motors (testing) while monitoring sensors<br />
    - Major UI changes in Motor Testing tab<br />
    - Tiny cosmetic changes<br />
    - Initial set of UI bugfixes for Chrome 36+<br />
</p>
<span>16.06.2014 - 0.42</span>
<p>
    - Added I2C Error indicator to status bar<br />
    - Optimizations &amp; bugfixes<br />
</p>
<span>01.06.2014 - 0.41</span>
<p>
    - Configurator reached 4000+ users on 29.05.2014<br />
    - Support for new current sensing code (latest firmware)<br />
</p>
<span>27.05.2014 - 0.40</span>
<p>
    - Added Logging tab (log various MSP data into CSV file)<br />
    - Bugfix for CLI input area<br />
</p>
<span>08.05.2014 - 0.39</span>
<p>
    - UI enhancements for sensors tab<br />
</p>
<span>08.05.2014 - 0.38</span>
<p>
    - Bugfix for firmware flasher UI<br />
    - Updating libraries<br />
</p>
<span>08.05.2014 - 0.37</span>
<p>
    - Window can be resized and maximized<br />
    - Graphs will now properly scale to fill content area<br />
    - Small GPS UI rework<br />
    - Small UI polish on all tabs<br />
    - Bugfixes<br />
</p>
<span>03.05.2014 - 0.36</span>
<p>
    - Another bugfix for high dpi displays<br />
    - PID names will now match PID names in firmware<br />
</p>
<span>03.05.2014 - 0.35</span>
<p>
    - Configurator reached 3000+ users on 03.05.2014<br />
    - Polished Welcome screen<br />
    - Tiny UI bugfix for gps tab<br />
</p>
<span>29.04.2014 - 0.34</span>
<p>
    - Bugfix for wrong graph positions on high dpi displays<br />
</p>
<span>26.04.2014 - 0.33</span>
<p>
    - Bugfix for loading online firmware<br />
</p>
<span>22.04.2014 - 0.32</span>
<p>
    - Native application frame on Chrome 35+<br />
    - Dedicated application options<br />
    - Reworked Sensors tab (optimized graphs, new ui)<br />
    - Small ui changes<br />
    - Performance improvements<br />
</p>
<span>11.04.2014 - 0.31</span>
<p>
    - Bugfix for Sliders not properly updating<br />
    - Bugfix for CLI line feed on ChromeOS<br />
</p>
<span>03.04.2014 - 0.30</span>
<p>
    - Configurator reached 2000+ users on 24.03.2014<br />
    - Initial work on translation support<br />
    - Small UI rework in initial tab<br />
    - UI rework in receiver tab, new plot<br />
    - Bugfixes related to servo tab, ui polish<br />
    - Added info box in initial tab display voltage &amp; RSSI<br />
    - Stability improvements, performance improvements, bugfixes<br />
</p>
<span>09.03.2014 - 0.29</span>
<p>
    - Motor Tab UI bugfixes<br />
    - Added support for variable plot refresh rate in Receiver Tab<br />
    - Bugfixes<br />
</p>
<span>01.03.2014 - 0.28</span>
<p>
    - Online Firmware now displays Github commit info<br />
    - Stability improvements &amp; bugfixes<br />
</p>
<span>27.02.2014 - 0.27</span>
<p>
    - Sensor Tab UI bugfixes<br />
    - Firmware Flasher functionality improvements<br />
    - Added new "developer" functionality "flash on connect"<br />
    - Major Version checking added<br />
</p>
<span>23.02.2014 - 0.26</span>
<p>
    - Motor tab UI / functionality changes<br />
    - Backup settings IO bugfixes<br />
    - Receiver / Aux config tab command collision bugfix<br />
</p>
<span>20.02.2014 - 0.25</span>
<p>
    - Running on new serial API (Chrome 33+)<br />
    - Added Velocity in PID tab<br />
    - Added Profile select in PID tab<br />
    - Different scaling for raw sensor data<br />
    - Motor Test now support defining min/max values<br />
    - Added Master slider in Motor Test UI<br />
    - There should be no "garbage" in the beginning of CLI session<br />
    - Added Log window<br />
    - Print Operating System, Chrome, Configurator versions on startup<br />
    - Firmware flashing backend rework<br />
    - IHEX parser code rework<br />
    - Stronger input field validation (for most numeric fields)<br />
</p>
<span>17.01.2014 - 0.24</span>
<p>
    - Added Battery warning / scale UI<br />
    - Added Min Throttle, Failsafe Throttle UI<br />
    - Stronger Input validation<br />
    - Bugfixes<br />
</p>
<span>04.01.2014 - 0.23</span>
<p>
    - Various UI changes across the board<br />
</p>
<span>29.12.2013 - 0.22</span>
<p>
    - Added auto-connect feature (enabled by default)<br />
    - Bugfixes<br />
</p>
<span>18.12.2013 - 0.21</span>
<p>
    - Handle small screen resolutions more gracefully<br />
    - Bugfix for Servo tab save button &amp; CAMSTAB<br />
</p>
<span>16.12.2013 - 0.20</span>
<p>
    - Minor iprovements &amp; bugfixes<br />
</p>
<span>09.12.2013 - 0.19</span>
<p>
    - Added packet error counter in status bar<br />
    - Servos tab now also shows servos that belong to servo_tilt<br />
    - Potential bugfixes for STM32 flasher<br />
    - Minor iprovements &amp; bugfixes<br />
</p>
<span>26.11.2013 - 0.18</span>
<p>
    - Removing Refresh button<br />
    - Ports are automatically pulled in the background<br />
    - Added Gimbal mixer suppor to Servos tab (experimental)<br />
    - Small UI changes related to connect sequence<br />
    - Added "error" user notifications if initial connect times out<br />
</p>
<span>17.11.2013 - 0.17</span>
<p>
    - Extensive work on Firmware Flasher &amp; STM32 protocol<br />
    - Faster flashing speed (improvement of about 24%)<br />
    - Using separate thread for hex file parsing (multithreading)<br />
    - Bugfixes related to flashing gnu compiled .hex files<br />
</p>
<span>14.11.2013 - 0.16</span>
<p>
    - Minimum required Google Chrome / Chromium version is now 31<br />
    - Polished Firmware Flasher UI<br />
    - Bugfixes related to flashing rev5 naze boards<br />
</p>
<span>14.11.2013 - 0.15</span>
<p>
    - Added firmware flasher (currently supporting 2 modes)<br />
    - 1 - "local flashing", from a .hex file<br />
    - 2 - "online flashing", latest firmware is fetched from github.com<br />
</p>
<span>12.11.2013 - 0.14</span>
<p>
    - Re-Enabled Servos tab (hopefully with all problems sorted out)<br />
    - Added support for "Motor Testing Mode" in Motor/Servo Outputs tab<br />
    - Updated MSP<br />
    - Utilizing notification API to promote new app version updates<br />
</p>
<span>10.11.2013 - 0.13</span>
<p>
    - Disabling Servos tab until all bugs are ironed out<br />
    - Bugfixes<br />
</p>
<span>09.11.2013 - 0.12</span>
<p>
    - Bugfixes related to failing connect procedure<br />
    - Bugfixes related to GPS data types<br />
    - Implemented experimental <strong>Servos</strong> tab<br />
    - Updated MSP to the latest version<br />
    - Major MSP refactoring, improving reliability in some cases<br />
    - Initial notify implementation for critical errors<br />
</p>
<span>02.11.2013 - 0.11</span>
<p>
    - Debug values are now displayed and plotted in Sensor tab (dade)<br />
    - Command history in CLI tab (dade)<br />
    - Bugfixes related to GPS tab<br />
</p>
<span>30.10.2013 - 0.10</span>
<p>
    - AUX Configuration now shows current AUX channel state<br />
    - Polished couple of texts<br />
    - Added changelog within the app<br />
    - 3D view in Initial Setup now displays model type selected<br />
</p>
<span>16.10.2013 - 0.9</span>
<p>
    - Polished Auxiliary configuration tab<br />
    - Polished Raw sensod data tab<br />
    - Updated libraries<br />
</p>