- Support mode ranges on auxillary tab. Requires latest firmware.

- Update URLs.

- Update default data filenames.

- Ensure initialised data is not used when configuring aux channels.
- Update sponsors for cleanflight specific sponsors.

- Small UI revamp for Firmware Flasher
- Added "Flash slowly" mode (bluetooth friendly)
- Bugfixes

- Fix auxiliary configuration tab when using an rc system with 3 aux channels.

- Motor indicators now display signal length in tooltips
- Additional motor order diagrams (creyc)
- Bugfixes

- Configurator reached 6000+ users on 07.26.2014
- Added motor order diagrams (creyc, Curtisbeef)
- Flashing timeout bugfixes

- Fix auxiliary configuration tab when using parallel pwm.

- Bugfixes related to Chrome 36+ release
- Various optimizations and behavior improvements

- Application will display a spinner while waiting for data
- Bugfixes
07.06.2014 - cleanflight

- Servos tab updated to support Cleanflight's cleaner implementation of channel forwarding

- Configurator reached 5000+ users on 07.03.2014
- Updated various text notes to make things clearer
- UI polish
- Various bugfixes

- Added more scale factors in the motor testing tab
- If application closes without disconnecting motors should spin down
- Bugfixes for CLI, Motor Testing & Logging tabs

- Experimental passthrough support for logging
- MSP_ANALOG support for logging
- Allow running motors (testing) while monitoring sensors
- Major UI changes in Motor Testing tab
- Tiny cosmetic changes
- Initial set of UI bugfixes for Chrome 36+

- Added I2C Error indicator to status bar
- Optimizations & bugfixes

- Configurator reached 4000+ users on 05.29.2014
- Support for new current sensing code (latest firmware)

- Added Logging tab (log various MSP data into CSV file)
- Bugfix for CLI input area

- UI enhancements for sensors tab

- Bugfix for firmware flasher UI
- Updating libraries

- Window can be resized and maximized
- Graphs will now properly scale to fill content area
- Small GPS UI rework
- Small UI polish on all tabs
- Bugfixes

- Another bugfix for high dpi displays
- PID names will now match PID names in firmware

- Configurator reached 3000+ users on 05.03.2014
- Polished Welcome screen
- Tiny UI bugfix for gps tab

- Bugfix for wrong graph positions on high dpi displays

- Bugfix for loading online firmware

- Native application frame on Chrome 35+
- Dedicated application options
- Reworked Sensors tab (optimized graphs, new ui)
- Small ui changes
- Performance improvements

- Bugfix for Sliders not properly updating
- Bugfix for CLI line feed on ChromeOS

- Configurator reached 2000+ users on 03.24.2014
- Initial work on translation support
- Small UI rework in initial tab
- UI rework in receiver tab, new plot
- Bugfixes related to servo tab, ui polish
- Added info box in initial tab display voltage & RSSI
- Stability improvements, performance improvements, bugfixes

- Motor Tab UI bugfixes
- Added support for variable plot refresh rate in Receiver Tab
- Bugfixes

- Online Firmware now displays Github commit info
- Stability improvements & bugfixes

- Sensor Tab UI bugfixes
- Firmware Flasher functionality improvements
- Added new "developer" functionality "flash on connect"
- Major Version checking added

- Motor tab UI / functionality changes
- Backup settings IO bugfixes
- Receiver / Aux config tab command collision bugfix

- Running on new serial API (Chrome 33+)
- Added Velocity in PID tab
- Added Profile select in PID tab
- Different scaling for raw sensor data
- Motor Test now support defining min/max values
- Added Master slider in Motor Test UI
- There should be no "garbage" in the beginning of CLI session
- Added Log window
- Print Operating System, Chrome, Configurator versions on startup
- Firmware flashing backend rework
- IHEX parser code rework
- Stronger input field validation (for most numeric fields)

- Added Battery warning / scale UI
- Added Min Throttle, Failsafe Throttle UI
- Stronger Input validation
- Bugfixes

- Various UI changes across the board

- Added auto-connect feature (enabled by default)
- Bugfixes

- Handle small screen resolutions more gracefully
- Bugfix for Servo tab save button & CAMSTAB

- Minor iprovements & bugfixes

- Added packet error counter in status bar
- Servos tab now also shows servos that belong to servo_tilt
- Potential bugfixes for STM32 flasher
- Minor iprovements & bugfixes

- Removing Refresh button
- Ports are automatically pulled in the background
- Added Gimbal mixer suppor to Servos tab (experimental)
- Small UI changes related to connect sequence
- Added "error" user notifications if initial connect times out

- Extensive work on Firmware Flasher & STM32 protocol
- Faster flashing speed (improvement of about 24%)
- Using separate thread for hex file parsing (multithreading)
- Bugfixes related to flashing gnu compiled .hex files

- Minimum required Google Chrome / Chromium version is now 31
- Polished Firmware Flasher UI
- Bugfixes related to flashing rev5 naze boards

- Added firmware flasher (currently supporting 2 modes)
- 1 - "local flashing", from a .hex file
- 2 - "online flashing", latest firmware is fetched from github.com

- Re-Enabled Servos tab (hopefully with all problems sorted out)
- Added support for "Motor Testing Mode" in Motor/Servo Outputs tab
- Updated MSP
- Utilizing notification API to promote new app version updates

- Disabling Servos tab until all bugs are ironed out
- Bugfixes

- Bugfixes related to failing connect procedure
- Bugfixes related to GPS data types
- Implemented experimental Servos tab
- Updated MSP to the latest version
- Major MSP refactoring, improving reliability in some cases
- Initial notify implementation for critical errors

- Debug values are now displayed and plotted in Sensor tab (dade)
- Command history in CLI tab (dade)
- Bugfixes related to GPS tab

- AUX Configuration now shows current AUX channel state
- Polished couple of texts
- Added changelog within the app
- 3D view in Initial Setup now displays model type selected

- Polished Auxiliary configuration tab
- Polished Raw sensod data tab
- Updated libraries