$2"
},
"buildServerUsingCached": {
"message": "使用已緩存的 $1 生成訊息。"
},
"releaseCheckLoaded": {
"message": "從Github 載入 $1 發佈訊息"
},
"releaseCheckFailed": {
"message": "從 GitHub 獲取 $1 發佈版本失敗，載入原版本訊息。 失敗原因：$2"
},
"releaseCheckCached": {
"message": "使用已緩存的 $1 版本訊息"
},
"releaseCheckNoInfo": {
"message": "找不到 $1 發佈訊息"
},
"tabSwitchConnectionRequired": {
"message": "在查看任何頁面訊息之前，您需要先連接"
},
"tabSwitchWaitForOperation": {
"message": "執行當前操作，請等待上一個操作完成…"
},
"tabSwitchUpgradeRequired": {
"message": "需要更新到最新版本的 Betaflight 固件才能使用 $1 頁面"
},
"firmwareVersion": {
"message": "固件版本：$1"
},
"apiVersionReceived": {
"message": "MultiWii API 版本：$1"
},
"uniqueDeviceIdReceived": {
"message": "唯一設備 ID: 0x$1"
},
"craftNameReceived": {
"message": "飛行器名稱：$1"
},
"armingDisabled": {
"message": "禁止解鎖"
},
"armingEnabled": {
"message": "允許解鎖"
},
"runawayTakeoffPreventionDisabled": {
"message": " 預防起飛失控 已被臨時禁用"
},
"runawayTakeoffPreventionEnabled": {
"message": " 預防起飛失控 已啟用"
},
"boardInfoReceived": {
"message": "飛控：$1，版本：$2"
},
"buildInfoReceived": {
"message": "當前固件發佈時間：$1"
},
"fcInfoReceived": {
"message": "飛控訊息，識別名：$1，版本：$2"
},
"versionLabelTarget": {
"message": "飛控型號"
},
"versionLabelFirmware": {
"message": "固件"
},
"versionLabelConfigurator": {
"message": "配置程式"
},
"notifications_app_just_updated_to_version": {
"message": "程式已更新到版本: $1"
},
"notifications_click_here_to_start_app": {
"message": "單擊這裡運行程式"
},
"statusbar_port_utilization": {
"message": "埠口利用率：",
"description": "Port utilization text shown in the status bar"
},
"statusbar_packet_error": {
"message": "數據包錯誤:",
"description": "Packet error text shown in the status bar"
},
"statusbar_i2c_error": {
"message": "I2C 錯誤:",
"description": "CPU load text shown in the status bar"
},
"statusbar_cycle_time": {
"message": "循環時間:",
"description": "Cycle time text shown in the status bar"
},
"dfu_connect_message": {
"message": "請使用固件燒寫器來訪問 DFU 設備"
},
"dfu_erased_kilobytes": {
"message": "擦除$1 kB 快閃記憶體 "
},
"dfu_device_flash_info": {
"message": "檢測到快閃記憶體空間為 $1 KiB 的晶片"
},
"dfu_error_image_size": {
"message": "：固件文件大於飛控晶片的快閃記憶體。固件大小: $1 KiB，上限 = $2 KiB"
},
"eeprom_saved_ok": {
"message": "EEPROM "
},
"defaultWelcomeIntro": {
"message": "歡迎使用 Betaflight - 配置程式，為簡化固件升級，設置和調校飛控而生的工具。"
},
"defaultWelcomeHead": {
"message": "硬體"
},
"defaultContributingHead": {
"message": "參與開發"
},
"defaultContributingText": {
"message": "如果你想幫助 Betaflight 變得更好，你可以：Betaflight是一個開放源碼的飛行控制軟體，它可供所有用戶免費使用，但 不提供擔保。
如果你覺得 Betaflight 或 Betaflight 配置程式對你有用，請考慮捐贈以 支援 它的開發工作
" }, "defaultDonateBottom": { "message": "如果你想持續捐助資金，請考慮在$t(patreonLink.message)上贊助我們。
" }, "patreonLink": { "message": "Patreon", "description": "Patreon is name, and should not require translation" }, "defaultDonate": { "message": "捐贈" }, "defaultSponsorsHead": { "message": "贊助商" }, "defaultDocumentationHead": { "message": "文檔/手冊" }, "defaultDocumentation": { "message": "Betaflight 的文檔和發佈說明可以在 wiki 裡面找到。CLI中的某些命令可能導致電機輸出引腳發出隨機指令。如果連接電池，這有可能導致電機旋轉。因此，強烈建議在 CLI 中輸入令之前確保未連接電池。"
},
"cliInputPlaceholder": {
"message": "在這裡輸入你的命令。按 Tab 可以進行自動填充。"
},
"cliInputPlaceholderBuilding": {
"message": "正在構建“自動填充”緩存，請稍候…"
},
"cliEnter": {
"message": "檢測到命令行模式"
},
"cliReboot": {
"message": "檢測到命令行重啟"
},
"cliSaveToFileBtn": {
"message": "保存到文件"
},
"cliClearOutputHistoryBtn": {
"message": "清除輸出歷史記錄"
},
"cliCopyToClipboardBtn": {
"message": "複製到剪貼簿"
},
"cliCopySuccessful": {
"message": "複製成功！"
},
"cliLoadFromFileBtn": {
"message": "從文件加載"
},
"cliConfirmSnippetDialogTitle": {
"message": "已加載文件{{fileName}}。查看已加載的命令"
},
"cliConfirmSnippetNote": {
"message": "注意：你可以在執行前查看和編輯命令"
},
"cliConfirmSnippetBtn": {
"message": "執行"
},
"loggingNote": {
"message": "數據在此頁面記錄，關閉此頁面將會 數據記錄，並且應用將會返回“普通配置”狀態。
你可以選擇合適的全局刷新率，飛控出於性能考慮，只會每 1 秒寫入一次日誌。"
},
"loggingSamplesSaved": {
"message": "採樣已保存"
},
"loggingLogSize": {
"message": "記錄大小："
},
"loggingButtonLogFile": {
"message": "選擇記錄文件"
},
"loggingStart": {
"message": "開始記錄"
},
"loggingStop": {
"message": "停止記錄"
},
"loggingBack": {
"message": "退出記錄/斷開連接"
},
"loggingErrorNotConnected": {
"message": "請先連接"
},
"loggingErrorLogFile": {
"message": "請選擇記錄文件"
},
"loggingErrorOneProperty": {
"message": "至少需要選擇一個數據集來記錄"
},
"loggingAutomaticallyRetained": {
"message": "已自動加載上一個記錄文件: $1"
},
"blackboxNotSupported": {
"message": "該飛控固件不支援黑盒日誌記錄"
},
"blackboxMaybeSupported": {
"message": "飛控固件版本太低，無法打開該頁面，或者黑盒功能沒有在設置頁面打開。"
},
"blackboxConfiguration": {
"message": "黑盒設置"
},
"blackboxButtonSave": {
"message": "保存並重啟"
},
"blackboxLoggingNone": {
"message": "無"
},
"blackboxLoggingFlash": {
"message": "板載快閃記憶體"
},
"blackboxLoggingSdCard": {
"message": "SD 卡"
},
"blackboxLoggingSerial": {
"message": "串口"
},
"serialLoggingSupportedNote": {
"message": "你可以使用序列埠外接記錄設備來記錄日誌（例如 OpenLager）。需要在埠口設置頁設置響應的埠口。"
},
"sdcardNote": {
"message": "飛行數據可以保存到板載的SD卡槽。"
},
"dataflashUsedSpace": {
"message": "已用空間"
},
"dataflashFreeSpace": {
"message": "可用空間"
},
"dataflashUnavSpace": {
"message": "不可用空間"
},
"dataflashLogsSpace": {
"message": "記錄可用空間"
},
"dataflashNote": {
"message": "飛行數據可以保存到板載的快閃記憶體內。"
},
"dataflashNotPresentNote": {
"message": "你的飛控沒有可用的快閃記憶體晶片。"
},
"dataflashFirmwareUpgradeRequired": {
"message": "板載快閃記憶體需要固件版本 >= 1.8.0。"
},
"dataflashButtonSaveFile": {
"message": "保存快閃記憶體數據到文件"
},
"dataflashButtonErase": {
"message": "擦除快閃記憶體"
},
"dataflashConfirmEraseTitle": {
"message": "確認擦除快閃記憶體"
},
"dataflashConfirmEraseNote": {
"message": "這將會擦除山村裡面保存的所有黑盒日誌。它將耗時20秒左右，確定繼續？"
},
"dataflashSavingTitle": {
"message": "正在保存快閃記憶體數據到文件"
},
"dataflashSavingNote": {
"message": "保存快閃記憶體數據到文件可能會需要幾分鐘，請等待。"
},
"dataflashSavingNoteAfter": {
"message": "保存成功，點擊 “確認” 繼續"
},
"dataflashButtonSaveCancel": {
"message": "取消"
},
"dataflashButtonSaveDismiss": {
"message": "確認"
},
"dataflashButtonEraseConfirm": {
"message": "確認擦除"
},
"dataflashButtonEraseCancel": {
"message": "取消"
},
"dataflashFileWriteFailed": {
"message": "寫入文件失敗，請確認文件和文件夾權限"
},
"sdcardStatusNoCard": {
"message": "無SD卡"
},
"sdcardStatusReboot": {
"message": "致命錯誤
重啟後再試"
},
"sdcardStatusReady": {
"message": "SD 卡就緒"
},
"sdcardStatusStarting": {
"message": "SD 卡啟動中…"
},
"sdcardStatusFileSystem": {
"message": "文件系統啟動中…"
},
"sdcardStatusUnknown": {
"message": "未知狀態 $1"
},
"firmwareFlasherReleaseSummaryHead": {
"message": "發佈訊息"
},
"firmwareFlasherReleaseManufacturer": {
"message": "製造商 ID："
},
"firmwareFlasherReleaseVersion": {
"message": "版本:"
},
"firmwareFlasherReleaseVersionUrl": {
"message": "訪問發佈訊息頁面"
},
"firmwareFlasherReleaseNotes": {
"message": "發佈說明："
},
"firmwareFlasherReleaseDate": {
"message": "日期："
},
"firmwareFlasherReleaseTarget": {
"message": "飛控目標："
},
"firmwareFlasherReleaseFile": {
"message": "二進制"
},
"firmwareFlasherUnifiedTargetName": {
"message": "統一目標："
},
"firmwareFlasherUnifiedTargetFileUrl": {
"message": "顯示配置"
},
"firmwareFlasherUnifiedTargetDate": {
"message": "日期："
},
"firmwareFlasherReleaseFileUrl": {
"message": "手動下載"
},
"firmwareFlasherTargetWarning": {
"message": "：請選擇飛控對應的固件，如果燒寫錯誤的固件將會導致 的事發生。"
},
"firmwareFlasherPath": {
"message": "路徑："
},
"firmwareFlasherSize": {
"message": "大小："
},
"firmwareFlasherStatus": {
"message": "狀態："
},
"firmwareFlasherProgress": {
"message": "進度："
},
"firmwareFlasherLoadFirmwareFile": {
"message": "請載入固件文件"
},
"firmwareFlasherLoadedConfig": {
"message": "已加載目標，請加載固件文件"
},
"firmwareFlasherNoReboot": {
"message": "無重啟序列"
},
"firmwareFlasherOnlineSelectBuildType": {
"message": "選擇 “生成類型” 以查看可用的飛控板。"
},
"firmwareFlasherOnlineSelectFirmwareVersionDescription": {
"message": "選擇對應你飛控型號的固件版本"
},
"firmwareFlasherNoRebootDescription": {
"message": "如果你的飛控已處於boot模式下則啟用這個選項。比如你在插電時已經短接了飛控的boot引腳或者按住了boot按鈕。"
},
"firmwareFlasherFlashOnConnect": {
"message": "當飛控連接時自動燒錄固件"
},
"firmwareFlasherFlashOnConnectDescription": {
"message": "當發現新的串口設備時嘗試自動燒錄固件"
},
"firmwareFlasherFullChipErase": {
"message": "全盤擦除（會丟失所有設置）"
},
"firmwareFlasherFullChipEraseDescription": {
"message": "擦除保存在飛控上的所有設置"
},
"firmwareFlasherFlashDevelopmentFirmware": {
"message": "使用測試版本固件"
},
"firmwareFlasherFlashDevelopmentFirmwareDescription": {
"message": "燒錄最新（沒有經過測試）的固件"
},
"firmwareFlasherManualPort": {
"message": "埠口"
},
"firmwareFlasherManualBaud": {
"message": "手動設置鮑率"
},
"firmwareFlasherManualBaudDescription": {
"message": "如果飛控不支援默認的鮑率，或者要通過藍芽模塊来烧录，可以手動設置鮑率。
USB DFU 燒錄時該選項無效。"
},
"firmwareFlasherBaudRate": {
"message": "鮑率"
},
"firmwareFlasherShowDevelopmentReleases": {
"message": "顯示非穩定版本"
},
"firmwareFlasherShowDevelopmentReleasesDescription": {
"message": "除了穩定的版本外，還顯示候選版本"
},
"firmwareFlasherOptionLoading": {
"message": "加載中…"
},
"firmwareFlasherOptionLabelBuildTypeRelease": {
"message": "正式版"
},
"firmwareFlasherOptionLabelBuildTypeReleaseCandidate": {
"message": "正式版和候選正式版"
},
"firmwareFlasherOptionLabelBuildTypeDevelopment": {
"message": "開發版"
},
"firmwareFlasherOptionLabelBuildTypeAKK3_3": {
"message": "3.3 AKK & RDQ 圖傳 補丁"
},
"firmwareFlasherOptionLabelBuildTypeAKK3_4": {
"message": "3.4 AKK & RDQ 圖傳 補丁"
},
"firmwareFlasherOptionLabelSelectFirmware": {
"message": "選擇固件/飛控板"
},
"firmwareFlasherOptionLabelSelectBoard": {
"message": "選擇飛控板"
},
"firmwareFlasherOptionLabelSelectFirmwareVersion": {
"message": "選擇固件版本"
},
"firmwareFlasherOptionLabelSelectFirmwareVersionFor": {
"message": "選擇固件版本"
},
"firmwareFlasherButtonLoadLocal": {
"message": "從本地電腦加載固件"
},
"firmwareFlasherButtonLoadOnline": {
"message": "從網路加載固件"
},
"firmwareFlasherButtonDownloading": {
"message": "下載中…"
},
"firmwareFlasherExitDfu": {
"message": "退出 DFU 模式"
},
"firmwareFlasherFlashFirmware": {
"message": "燒寫固件"
},
"firmwareFlasherGithubInfoHead": {
"message": "GitHub 固件訊息"
},
"firmwareFlasherCommiter": {
"message": "提交者："
},
"firmwareFlasherDate": {
"message": "日期："
},
"firmwareFlasherHash": {
"message": "Hash:"
},
"firmwareFlasherUrl": {
"message": "打開 GitHub 查看該提交…"
},
"firmwareFlasherMessage": {
"message": "訊息："
},
"firmwareFlasherRecoveryHead": {
"message": " 恢復/丟失通訊"
},
"firmwareFlasherButtonLeave": {
"message": "關閉固件燒寫"
},
"firmwareFlasherFirmwareNotLoaded": {
"message": "沒有加載固件"
},
"firmwareFlasherHexCorrupted": {
"message": "HEX文件似乎已損壞"
},
"firmwareFlasherConfigCorrupted": {
"message": "配置文件似乎已損壞，ASCII(字符0-255) 碼已接收",
"description": "shown in the progress bar at the bottom, be brief"
},
"firmwareFlasherConfigCorruptedLogMessage": {
"message": "配置文件似乎已損壞，ASCII(字符0-255) 碼已接收，此範圍外的字符將被作為註釋",
"description": "shown in the log, more wordy"
},
"firmwareFlasherRemoteFirmwareLoaded": {
"message": ""
},
"firmwareFlasherFailedToLoadOnlineFirmware": {
"message": "加載固件失敗"
},
"firmwareFlasherFailedToLoadUnifiedConfig": {
"message": "無法加載{{remote_file}} 的遠程配置"
},
"firmwareFlasherLegacyLabel": {
"message": "{{target}} (舊格式)",
"description": "If we have a Unified target and a old style target available, we are labeling the older one"
},
"firmwareFlasherNoFirmwareSelected": {
"message": "沒有找到選擇的固件"
},
"firmwareFlasherNoValidPort": {
"message": ""
},
"firmwareFlasherWritePermissions": {
"message": "沒有該文件的權限"
},
"firmwareFlasherFlashTrigger": {
"message": "檢測到飛控：$1 - 正在觸發自動燒錄"
},
"unstableFirmwareAcknoledgementDialog": {
"message": "您將要刷入一個開發版本固件。這些固件仍在開發中，並且可能會造成下列問題：
如果您繼續刷入此固件，您將對上述所有風險承擔全部責任。此外，您需要明白，您必須在嘗試解鎖起飛之前卸下螺旋槳並進行必要的測試。"
},
"unstableFirmwareAcknoledgementAcknowledge": {
"message": "我已閱讀上述聲明並且我自願承擔刷入不穩定版本固件的一切後果"
},
"unstableFirmwareAcknoledgementFlash": {
"message": "刷寫"
},
"firmwareFlasherPreviousDevice": {
"message": "檢測到：$1 - 仍在燒錄前一個設備，請稍後重新插入再試一次。"
},
"ledStripHelp": {
"message": "飛控可以控制 LED 燈帶上的每一個燈珠的顏色和效果。
配置燈珠的位置，連線的順序，然後按位置將燈帶接入。沒有設置過接線順序的燈珠設置不會被保存。
在一個顏色上雙擊可編輯 HSV 值。"
},
"ledStripButtonSave": {
"message": "保存"
},
"ledStripColorSetupTitle": {
"message": "顏色設置",
"description": "Color setup title of the led strip"
},
"ledStripH": {
"message": "H",
"description": "Abbreviation of Hue in HSV (Hue, Saturation, Brightness) color model"
},
"ledStripS": {
"message": "S",
"description": "Abbreviation of Saturation in HSV (Hue, Saturation, Brightness) color model"
},
"ledStripV": {
"message": "V",
"description": "Abbreviation of Brightness in HSV (Hue, Saturation, Brightness) color model"
},
"ledStripRemainingText": {
"message": "剩餘",
"description": "In the LED STRIP, text next the counter of leds remaining"
},
"ledStripClearSelectedButton": {
"message": "清除已選擇",
"description": "In the LED STRIP, clear selected leds"
},
"ledStripClearAllButton": {
"message": "全部清除",
"description": "In the LED STRIP, clear all leds"
},
"ledStripEepromSaved": {
"message": "EEPROM "
},
"ledStripVtxOverlay": {
"message": "圖傳(顏色根據圖傳頻率而變化)"
},
"ledStripFunctionSection": {
"message": "LED 功能"
},
"ledStripFunctionTitle": {
"message": "功能"
},
"ledStripFunctionNoneOption": {
"message": "無",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionColorOption": {
"message": "顏色",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionModesOption": {
"message": "模式和方向",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionArmOption": {
"message": "鎖定狀態",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionBatteryOption": {
"message": "電池",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionRSSIOption": {
"message": "RSSI",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionGPSOption": {
"message": "GPS",
"description": "One of the modes of the Led Strip"
},
"ledStripFunctionRingOption": {
"message": "環",
"description": "One of the modes of the Led Strip"
},
"ledStripColorModifierTitle": {
"message": "顏色修改器"
},
"ledStripModeColorsTitle": {
"message": "模式顏色"
},
"ledStripModeColorsModeOrientation": {
"message": "方向",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeHeadfree": {
"message": "無頭模式",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeHorizon": {
"message": "半自穩模式",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeAngle": {
"message": "自穩模式",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeMag": {
"message": "磁力計",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeBaro": {
"message": "氣壓計",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripDirN": {
"message": "北",
"description": "North direction in Color Mode in Led Strip"
},
"ledStripDirE": {
"message": "東",
"description": "East direction in Color Mode in Led Strip"
},
"ledStripDirS": {
"message": "南",
"description": "South direction in Color Mode in Led Strip"
},
"ledStripDirW": {
"message": "西",
"description": "West direction in Color Mode in Led Strip"
},
"ledStripDirU": {
"message": "上",
"description": "Up direction in Color Mode in Led Strip"
},
"ledStripDirD": {
"message": "下",
"description": "Down direction in Color Mode in Led Strip"
},
"ledStripModesOrientationTitle": {
"message": "LED 方向（“模式和方向”）和顏色",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModesSpecialColorsTitle": {
"message": "特殊顏色",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeDisarmed": {
"message": "已鎖定",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeArmed": {
"message": "已解鎖",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeAnimation": {
"message": "動畫",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeBlinkBg": {
"message": "閃爍背景",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeGPSNoSats": {
"message": "GPS: 無衛星",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeGPSNoLock": {
"message": "GPS: 未定位",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripModeColorsModeGPSLocked": {
"message": "GPS: 已定位",
"description": "One of the modes in Color Mode in Led Strip"
},
"ledStripWiring": {
"message": "LED 燈帶佈線",
"description": "One of the modes in Led Strip"
},
"ledStripWiringMode": {
"message": "佈線模式",
"description": "One of the wiring modes in Led Strip"
},
"ledStripWiringClearControl": {
"message": "清除已選擇",
"description": "Control button in the wiring modes in Led Strip"
},
"ledStripWiringClearAllControl": {
"message": "清除所有佈線",
"description": "Control button in the wiring modes in Led Strip"
},
"ledStripWiringMessage": {
"message": "沒有佈線序號的 LED 不會被保存。",
"description": "Message in the wiring modes in Led Strip"
},
"ledStripVtxFunction": {
"message": "左右掃描"
},
"ledStripBlinkTitle": {
"message": "閃爍"
},
"ledStripBlinkAlwaysOverlay": {
"message": "持續閃爍"
},
"ledStripBlinkLandingOverlay": {
"message": "著陸時閃爍"
},
"ledStripOverlayTitle": {
"message": "疊加"
},
"ledStripWarningsOverlay": {
"message": "警告"
},
"ledStripIndecatorOverlay": {
"message": "指示燈"
},
"colorBlack": {
"message": "黑色"
},
"colorWhite": {
"message": "白色"
},
"colorRed": {
"message": "紅色"
},
"colorOrange": {
"message": "橙色"
},
"colorYellow": {
"message": "黃色"
},
"colorLimeGreen": {
"message": "橙綠色"
},
"colorGreen": {
"message": "綠色"
},
"colorMintGreen": {
"message": "薄荷綠"
},
"colorCyan": {
"message": "青色"
},
"colorLightBlue": {
"message": "淺藍色"
},
"colorBlue": {
"message": "藍色"
},
"colorDarkViolet": {
"message": "暗紫色"
},
"colorMagenta": {
"message": "品紅色"
},
"colorDeepPink": {
"message": "深粉色"
},
"controlAxisRoll": {
"message": "橫滾 [A]"
},
"controlAxisPitch": {
"message": "俯仰 [E]"
},
"controlAxisYaw": {
"message": "方向 [R]"
},
"controlAxisThrottle": {
"message": "油門 [T]"
},
"controlAxisAux1": {
"message": "AUX 1"
},
"controlAxisAux2": {
"message": "AUX 2"
},
"controlAxisAux3": {
"message": "AUX 3"
},
"controlAxisAux4": {
"message": "AUX 4"
},
"controlAxisAux5": {
"message": "AUX 5"
},
"controlAxisAux6": {
"message": "AUX 6"
},
"controlAxisAux7": {
"message": "AUX 7"
},
"controlAxisAux8": {
"message": "AUX 8"
},
"controlAxisAux9": {
"message": "AUX 9"
},
"controlAxisAux10": {
"message": "AUX 10"
},
"controlAxisAux11": {
"message": "AUX 11"
},
"controlAxisAux12": {
"message": "AUX 12"
},
"controlAxisAux13": {
"message": "AUX 13"
},
"controlAxisAux14": {
"message": "AUX 14"
},
"controlAxisAux15": {
"message": "AUX 15"
},
"controlAxisAux16": {
"message": "AUX 16"
},
"pidTuningBasic": {
"message": "基本/手動模式"
},
"pidTuningYawJumpPrevention": {
"message": "抑制 Yaw Jump"
},
"pidTuningYawJumpPreventionHelp": {
"message": "抑制飛機在裝箱結束時的高度跳動。數值越高，抑制效果越強。（類似於舊的 Yaw D，在其他軸上不是真正的D）"
},
"pidTuningRcExpoPower": {
"message": "RC Expo 權重"
},
"pidTuningRcExpoPowerHelp": {
"message": "該指數用以計算RC Expo。在 Betaflight 3.0版本之前，該值固定為3。"
},
"pidTuningLevel": {
"message": "自穩/半自穩"
},
"pidTuningAltitude": {
"message": "氣壓計和聲納/高度"
},
"pidTuningMag": {
"message": "磁力計/朝向"
},
"pidTuningGps": {
"message": "GPS 導航"
},
"pidTuningStrength": {
"message": "強度"
},
"pidTuningTransition": {
"message": "過渡"
},
"pidTuningHorizon": {
"message": "半自穩模式"
},
"pidTuningAngle": {
"message": "自穩模式"
},
"pidTuningLevelAngleLimit": {
"message": "角度限制"
},
"pidTuningLevelSensitivity": {
"message": "敏感度"
},
"pidTuningLevelHelp": {
"message": "以下值會改變自穩和半自穩模式下的行為表現。不同的PID控制器對該值的要求數值會不一樣。具體請參閱文檔。"
},
"pidTuningMotorOutputLimit": {
"message": "電機輸出限制"
},
"pidTuningMotorLimit": {
"message": "縮放因子 [%]"
},
"pidTuningNonProfileFilterSettings": {
"message": "獨立於 PID 配置文件的濾波器設置"
},
"pidTuningSliderLowFiltering": {
"message": "更少濾波",
"description": "Filter tuning slider low header"
},
"pidTuningSliderDefaultFiltering": {
"message": "默認濾波",
"description": "Filter tuning slider default header"
},
"pidTuningSliderHighFiltering": {
"message": "更多濾波",
"description": "Filter tuning slider high header"
},
"pidTuningGyroFilterSlider": {
"message": "陀螺儀濾波器乘數:",
"description": "Gyro filter tuning slider label"
},
"pidTuningDTermFilterSlider": {
"message": "D Term 濾波器乘數:",
"description": "D Term filter tuning slider label"
},
"pidTuningSliderWarning": {
"message": ": 當前的滑塊位置可能導致起飛失控、電機損壞或飛行器出現其他不安全的行為。請謹慎行事。",
"description": "Warning shown when tuning slider are above safe limits"
},
"pidTuningSlidersDisabled": {
"message": "注意:滑塊已禁用，因為已手動更改數值。點擊$t(pidTuningSliderEnableButton.message)按鈕將再次激活它們。這將重置數值，任何未保存的更改都將丟失。",
"description": "Tuning sliders disabled note when manual changes are detected"
},
"pidTuningSliderEnableButton": {
"message": "開啟滑塊",
"description": "Button label for enabling sliders"
},
"pidTuningSlidersNonExpertMode": {
"message": "注意: 滑塊範圍受限，因為未使用專家模式。此範圍應該適用於大多數飛行器以及初學者。",
"description": "Sliders restricted message"
},
"pidTuningSliderLow": {
"message": "低",
"description": "Tuning Slider Low header"
},
"pidTuningSliderDefault": {
"message": "默認",
"description": "Tuning Slider Default header"
},
"pidTuningSliderHigh": {
"message": "高",
"description": "Tuning Slider High header"
},
"pidTuningMasterSlider": {
"message": "主乘數:",
"description": "Master tuning slider label"
},
"pidTuningPDRatioSlider": {
"message": "PD 平衡:",
"description": "PD balance tuning slider label"
},
"pidTuningPDGainSlider": {
"message": "P 和 D 增益:",
"description": "P and D Gain tuning slider label"
},
"pidTuningGyroLowpassFiltersGroup": {
"message": "陀螺儀低通濾波器"
},
"pidTuningGyroLowpassType": {
"message": "陀螺儀低通濾波器1類型"
},
"pidTuningGyroLowpassDynType": {
"message": "陀螺儀低通濾波器1動態濾波器類型"
},
"pidTuningGyroNotchFiltersGroup": {
"message": "陀螺儀陷波濾波器"
},
"pidTuningDynamicNotchFilterGroup": {
"message": "動態陷波濾波器"
},
"pidTuningDynamicNotchRange": {
"message": "動態陷波濾波器範圍"
},
"pidTuningDynamicNotchWidthPercent": {
"message": "動態陷波濾波器寬度百分比"
},
"pidTuningDynamicNotchRangeHelp": {
"message": "動態陷波濾波器有三個頻率範圍可供運行：LOW(80-330hz) 用於6英寸及以上的低速巡航機，MEDIU(140-550hz) 用於常見的5英寸飛行器，HIGH(230-800hz)用於電機轉速較高的2.5-3英寸的飛行器。 AUTO 選項將會使用陀螺儀低通濾波器1最高截止頻率範圍來決定頻率範圍。"
},
"pidTuningDynamicNotchWidthPercentHelp": {
"message": "這設置了兩個動態陷波濾波器之間的寬度。設置為0將禁用第二個動態陷波濾波器，並減少濾波延遲，但是它可能會使電機溫度更高。"
},
"pidTuningDynamicNotchQHelp": {
"message": "Q調整了動態陷波濾波器的寬度。更高的值將使其變得更窄、更精準，較低的值將使其變得更寬、更寬泛。將Q調到很低將會帶來很大的濾波器延遲。"
},
"pidTuningDynamicNotchMinHzHelp": {
"message": "將此設置為需要由動態陷波器控制的傳入噪聲的最低頻率。"
},
"pidTuningDynamicNotchMaxHzHelp": {
"message": "將此設置為需要由動態陷波器控制的傳入噪聲的最高頻率。"
},
"pidTuningRpmFilterGroup": {
"message": "陀螺儀 RPM 濾波器",
"description": "Header text for the RPM Filter group"
},
"pidTuningRpmHarmonics": {
"message": "陀螺儀 RPM 濾波器諧波數量",
"description": "Text for one of the parameters of the RPM Filter"
},
"pidTuningRpmHarmonicsHelp": {
"message": "每個電機的諧波數量。 3(推薦適用於大多數飛行器) 將會對每個電機在每個軸上生成3個陷波器，共計36個陷波器。一個基於電機基波頻率，另兩個基於基波頻率整數倍的諧波頻率。",
"description": "Help text for one of the parameters of the RPM Filter"
},
"pidTuningRpmMinHz": {
"message": "陀螺儀 RPM 濾波器最低頻率 [Hz]",
"description": "Text for one of the parameters of the RPM Filter"
},
"pidTuningRpmMinHzHelp": {
"message": "RPM 濾波器所使用的最小頻率。",
"description": "Help text for one of the parameters of the RPM Filter"
},
"pidTuningFilterSettings": {
"message": "配置文件關聯的濾波器設置"
},
"pidTuningDTermLowpassFiltersGroup": {
"message": "D Term 低通濾波器"
},
"pidTuningVbatPidCompensation": {
"message": "电池电压 PID 补偿"
},
"pidTuningVbatPidCompensationHelp": {
"message": "當電池電壓變低時， 飛控自動增加PID數值來補償動力的損失。這會在整個飛行過程中提供一個更一致的飛行特性。該補償數值通過在 ‘$t(tabPower.message)‘的 ‘$t(powerBatteryMaximum.message)’ 計算而得，所以請確保正確設置了該數值。"
},
"pidTuningVbatSagCompensation": {
"message": "電池壓降補償"
},
"pidTuningVbatSagValue": {
"message": "%"
},
"pidTuningItermRotation": {
"message": "I 值旋轉"
},
"pidTuningItermRotationHelp": {
"message": "在邊轉向邊翻滾以及做漏斗等特技時，將 I 向量正確旋轉到其他軸向上。比較受到目視飛行的飛手歡迎。"
},
"pidTuningSmartFeedforward": {
"message": "智能前饋"
},
"pidTuningSmartFeedforwardHelp": {
"message": "減少 F 值在 PID 中的效果。當 P 和 F 同時激活時，只取兩者中的較大值來避免過頭而無需提高 D，但這也會降低 F 值提供的響應效果。"
},
"pidTuningItermRelax": {
"message": "I 值釋放"
},
"pidTuningItermRelaxAxes": {
"message": "軸",
"description": "Iterm Relax Axes selection"
},
"pidTuningItermRelaxAxesOptionRPInc": {
"message": "RP (僅增量)"
},
"pidTuningItermRelaxAxesOptionRPYInc": {
"message": "RPY (僅增量)"
},
"pidTuningItermRelaxType": {
"message": "類型",
"description": "Iterm Relax Type selection"
},
"pidTuningItermRelaxTypeOptionGyro": {
"message": "陀螺儀"
},
"pidTuningItermRelaxTypeOptionSetpoint": {
"message": "設定點"
},
"pidTuningItermRelaxCutoff": {
"message": "截止頻率",
"description": "Cutoff value of the I Term Relax"
},
"pidTuningAbsoluteControlGain": {
"message": "絕對控制"
},
"pidTuningThrottleBoost": {
"message": "油門增壓"
},
"pidTuningIdleMinRpm": {
"message": "動態怠速值 [* 100 RPM]"
},
"pidTuningAcroTrainerAngleLimit": {
"message": "訓練模式角度限制"
},
"pidTuningIntegratedYaw": {
"message": "整合式偏航"
},
"pidTuningIntegratedYawCaution": {
"message": ": 如果你啟用此功能，則必須相應地調整偏航PID。更多訊息在此處"
},
"configHelp2": {
"message": "任意角度（直立，反轉，旋轉等）安裝飛控板。當使用外部傳感器時，請使用傳感器校正設置(陀螺，加速度計，磁場計)來決定獨立於飛控板的傳感器位置。"
},
"failsafeFeaturesHelpOld": {
"message": "失控保護功能被大量重做。請使用Betaflight v1.12.0+ 來啟用增強的失控保護設置頁。"
},
"failsafePaneTitleOld": {
"message": "接收器失控保護"
},
"failsafeFeaturesHelpNew": {
"message": "失控保護有兩個階段。若飛控在任一接收通道收到無效的脈衝長度，或者接收機匯報已失控，或者徹底沒有收到接收機訊號，飛控將進入一階失控保護狀態。飛控將會在使用預置通道設置，如果短時間內訊號恢復將可退出失控保護狀態。若飛機處於狀態，並且一階失控保護模式持續時間超過了預設的時間，飛控將進入二價失控保護狀態，所有通道將會保持當前輸出。
注意： 在飛控進入一階失控保護之前，如果AUX 通道出現無效的脈衝，該通道一樣會使用預置通道設置。"
},
"failsafePulsrangeTitle": {
"message": "有效脈衝範圍設置"
},
"failsafePulsrangeHelp": {
"message": "脈衝長度小於最小，或者超過最大，都會被認為是無效脈衝。將會觸發單個通道的預置設置覆蓋，或引起一階失控保護。"
},
"failsafeRxMinUsecItem": {
"message": "最小長度"
},
"failsafeRxMaxUsecItem": {
"message": "最大長度"
},
"failsafeChannelFallbackSettingsTitle": {
"message": "預置通道設置"
},
"failsafeChannelFallbackSettingsHelp": {
"message": "當進入一階失控保護時，這些設置將會應用於單獨無效的AUX 通道，或者是所有通道。 注意：數值應是25us的整數倍，小於25us的設置會被上下取整。"
},
"failsafeChannelFallbackSettingsAuto": {
"message": "自動 指的是 橫滾、俯仰、方向都回中，油門最低。 保持 指的是 所有通道保持最後從接收機接收到的有效的數值。"
},
"failsafeChannelFallbackSettingsHold": {
"message": "保持指的是 所有通道保持最後接收到的有效的數值。 設置 指的是 通道使用在這裡設定的值。"
},
"failsafeStageTwoSettingsTitle": {
"message": "二階失控保護 - 設置"
},
"failsafeDelayHelp": {
"message": "一階失控保護等待訊號恢復時間"
},
"failsafeThrottleLowHelp": {
"message": "在油門保持低位超過該時間，不再執行失控保護措施轉而直接鎖定電機。"
},
"failsafeThrottleItem": {
"message": "降落時油門大小"
},
"failsafeOffDelayHelp": {
"message": "暫時保持在降落模式而不鎖定電機的時間"
},
"failsafeSubTitle1": {
"message": "二階失控保護措施"
},
"failsafeProcedureItemSelect1": {
"message": "降落"
},
"failsafeProcedureItemSelect2": {
"message": "墜落"
},
"failsafeProcedureItemSelect4": {
"message": "GPS 救援"
},
"failsafeGpsRescueItemAngle": {
"message": "角度"
},
"failsafeGpsRescueItemInitialAltitude": {
"message": "初始高度 (米)"
},
"failsafeGpsRescueItemDescentDistance": {
"message": "下降距離 (米)"
},
"failsafeGpsRescueItemGroundSpeed": {
"message": "地面速度 (米/秒)"
},
"failsafeGpsRescueItemThrottleMin": {
"message": "最低油門"
},
"failsafeGpsRescueItemThrottleMax": {
"message": "最高油門"
},
"failsafeGpsRescueItemThrottleHover": {
"message": "懸停油門"
},
"failsafeGpsRescueItemAscendRate": {
"message": "上升速率（米/秒）"
},
"failsafeGpsRescueItemDescendRate": {
"message": "下降速率（米/秒）"
},
"failsafeGpsRescueItemMinSats": {
"message": "最小衛星數"
},
"failsafeGpsRescueItemAllowArmingWithoutFix": {
"message": "允許在未鎖定的情況下解鎖 - "
},
"failsafeGpsRescueItemAltitudeMode": {
"message": "高度模式"
},
"failsafeGpsRescueItemAltitudeModeMaxAlt": {
"message": "最大高度"
},
"failsafeGpsRescueItemAltitudeModeFixedAlt": {
"message": "固定高度"
},
"failsafeGpsRescueItemAltitudeModeCurrentAlt": {
"message": "當前高度"
},
"failsafeGpsRescueItemSanityChecks": {
"message": "可用性檢測"
},
"failsafeGpsRescueItemSanityChecksOff": {
"message": "關閉"
},
"failsafeGpsRescueItemSanityChecksOn": {
"message": "開啟"
},
"failsafeGpsRescueItemSanityChecksFSOnly": {
"message": "僅限失控保護"
},
"failsafeKillSwitchItem": {
"message": "失控保護開關 （在模式頁面設置失控保護模式）"
},
"failsafeKillSwitchHelp": {
"message": "設置這個選項會使失控保護開關(模式頁面設置)作為直接關閉開關，將會繞開所有的失控保護檢測程式。 注意: 當打開失控保護開關時，解鎖開關無效"
},
"failsafeSwitchTitle": {
"message": "失控保護開關"
},
"failsafeSwitchModeItem": {
"message": "失控保護開關行為"
},
"failsafeSwitchModeHelp": {
"message": "此選項確定通過輔助開關激活失控保護時發生的情況:
階段 1 激活階段1失控保護。如果要模擬訊號丟失時的失控保護行為，此功能非常有用。
階段 2 跳過階段1並立即激活階段2流程
終止 立即鎖定 （你的飛行器將會墜毀）"
},
"failsafeSwitchOptionStage1": {
"message": "階段 1"
},
"failsafeSwitchOptionStage2": {
"message": "階段 2"
},
"failsafeSwitchOptionKill": {
"message": "終止"
},
"powerButtonSave": {
"message": "保存"
},
"powerFirmwareUpgradeRequired": {
"message": "固件更新 。電池/電流/電壓通過API < 1.33.0 設置。（Betaflight 版本<=3.17）不支援。"
},
"powerBatteryVoltageMeterSource": {
"message": "電壓計選擇"
},
"powerBatteryVoltageMeterTypeNone": {
"message": "無"
},
"powerBatteryVoltageMeterTypeAdc": {
"message": "板載傳感器"
},
"powerBatteryVoltageMeterTypeEsc": {
"message": "電調傳感器"
},
"powerBatteryCurrentMeterSource": {
"message": "電調傳感器"
},
"powerBatteryCurrentMeterTypeNone": {
"message": "無"
},
"powerBatteryCurrentMeterTypeAdc": {
"message": "板載傳感器"
},
"powerBatteryCurrentMeterTypeVirtual": {
"message": "虛擬傳感器"
},
"powerBatteryCurrentMeterTypeEsc": {
"message": "電調傳感器"
},
"powerBatteryCurrentMeterTypeMsp": {
"message": "MSP 傳感器/OSD 從機"
},
"powerBatteryMinimum": {
"message": "最低單芯電壓"
},
"powerBatteryMaximum": {
"message": "最高單芯電壓"
},
"powerBatteryWarning": {
"message": "警告單芯電壓"
},
"powerCalibrationManagerButton": {
"message": "校準"
},
"powerCalibrationManagerTitle": {
"message": "校準管理器"
},
"powerCalibrationManagerHelp": {
"message": "要校準，請使用萬用表測量你的飛行器上(接上電池) 的實際電壓/電流，然後在下方輸入值。然後，在同一塊電池仍然接入的情況下，點擊 [Calibrate] 按鈕。"
},
"powerCalibrationManagerNote": {
"message": "注意：在校準縮放之前，請確保電壓和電流漂移的除數和乘數設置正確。
將值設置為0將不會應用校準。 切記在插入電池之前移除螺旋槳！ "
},
"powerCalibrationManagerWarning": {
"message": "電池或電壓計源和電流計源請確保電壓計和/或電流計讀數超過0. 否則您將無法使用此工具進行校準。"
},
"powerCalibrationManagerSourceNote": {
"message": "電壓計和/或電流計測量源已經更改，但未保存。請在校準之前設置並保存正確的測量源。"
},
"powerCalibrationManagerConfirmationTitle": {
"message": "校準管理器確認訊息"
},
"powerCalibrationSave": {
"message": "校準"
},
"powerCalibrationApply": {
"message": "應用校準"
},
"powerCalibrationDiscard": {
"message": "放棄校準"
},
"powerCalibrationConfirmHelp": {
"message": "這裡顯示新的校準放縮表。
應用它們將會設置縮放但並不會保存。
在保存之後，請確保新的電壓和電流讀數正確。 "
},
"powerVoltageHead": {
"message": "電壓計"
},
"powerVoltageWarning": {
"message": " 此值已被限制為 25.5A"
},
"powerVoltageValue": {
"message": "$1 V"
},
"powerVoltageCalibration": {
"message": "測量電壓"
},
"powerVoltageCalibratedScale": {
"message": "校準電壓縮放:"
},
"powerVoltageId10": {
"message": "電池"
},
"powerVoltageId20": {
"message": "5V"
},
"powerVoltageId30": {
"message": "9V"
},
"powerVoltageId40": {
"message": "12V"
},
"powerVoltageId50": {
"message": "電調組合"
},
"powerVoltageId60": {
"message": "電調 電機 1"
},
"powerVoltageId61": {
"message": "電調 電機 2"
},
"powerVoltageId62": {
"message": "電調 電機 3"
},
"powerVoltageId63": {
"message": "電調 電機 4"
},
"powerVoltageId64": {
"message": "電調 電機 5"
},
"powerVoltageId65": {
"message": "電調 電機 6"
},
"powerVoltageId66": {
"message": "電調 電機 7"
},
"powerVoltageId67": {
"message": "電調 電機 8"
},
"powerVoltageId68": {
"message": "電調 電機 9"
},
"powerVoltageId69": {
"message": "電調 電機 10"
},
"powerVoltageId70": {
"message": "電調 電機 11"
},
"powerVoltageId71": {
"message": "電調 電機 12"
},
"powerVoltageId80": {
"message": "第一節"
},
"powerVoltageId81": {
"message": "第二節"
},
"powerVoltageId82": {
"message": "第三節"
},
"powerVoltageId83": {
"message": "第四節"
},
"powerVoltageId84": {
"message": "第五節"
},
"powerVoltageId85": {
"message": "第六節"
},
"powerVoltageScale": {
"message": "比例"
},
"powerVoltageDivider": {
"message": "電阻分壓器數值"
},
"powerVoltageMultiplier": {
"message": "倍數"
},
"powerAmperageHead": {
"message": "電流計"
},
"powerAmperageWarning": {
"message": " 此值已被限制為 63.5A"
},
"powerAmperageValue": {
"message": "$1 A"
},
"powerAmperageId10": {
"message": "電池"
},
"powerAmperageId50": {
"message": "電調組合"
},
"powerAmperageId60": {
"message": "電調 電機 1"
},
"powerAmperageId61": {
"message": "電調 電機 2"
},
"powerAmperageId62": {
"message": "電調 電機 3"
},
"powerAmperageId63": {
"message": "電調 電機 4"
},
"powerAmperageId64": {
"message": "電調 電機 5"
},
"powerAmperageId65": {
"message": "電調 電機 6"
},
"powerAmperageId66": {
"message": "電調 電機 7"
},
"powerAmperageId67": {
"message": "電調 電機 8"
},
"powerAmperageId68": {
"message": "電調 電機 9"
},
"powerAmperageId69": {
"message": "電調 電機 10"
},
"powerAmperageId70": {
"message": "電調 電機 11"
},
"powerAmperageId71": {
"message": "電調 電機 12"
},
"powerAmperageId80": {
"message": "虛擬"
},
"powerAmperageId90": {
"message": "MSP"
},
"powerMahValue": {
"message": "$1 mAh"
},
"powerAmperageScale": {
"message": "比例 [1/10 mV/A]"
},
"powerAmperageOffset": {
"message": "偏移量 [mA]"
},
"powerAmperageCalibration": {
"message": "測量電流"
},
"powerAmperageCalibratedScale": {
"message": "校準電流縮放:"
},
"powerBatteryHead": {
"message": "電池"
},
"powerStateHead": {
"message": "電池狀態"
},
"powerBatteryConnected": {
"message": "已連接"
},
"powerBatteryConnectedValueYes": {
"message": "是 (电池芯数: $1)"
},
"powerBatteryConnectedValueNo": {
"message": "否"
},
"powerBatteryVoltage": {
"message": "電壓"
},
"powerBatteryCurrentDrawn": {
"message": "已用 mAh"
},
"powerBatteryAmperage": {
"message": "電流"
},
"powerBatteryCapacity": {
"message": "容量 (mAh)"
},
"osdSetupTitle": {
"message": "OSD 熒幕疊加顯示"
},
"osdSetupNoOsdChipDetectWarning": {
"message": "未檢測到OSD晶片。部分飛控在未接入電池的情況下無法給OSD晶片正常供電。請在連接 USB 之前接入電池 (務必卸下螺旋槳！)"
},
"osdSetupPreviewHelp": {
"message": "注意:OSD 預覽可能無法顯示飛控實際安裝的字體。當使用舊版本的固件時，某些圖標的佈局位置可能會有所不同 - 請在飛行之前先通過視頻眼鏡檢查妥當。"
},
"osdSetupUnsupportedNote1": {
"message": "飛控對 OSD 命令無反應，有可能飛控不帶 OSD 功能。"
},
"osdSetupUnsupportedNote2": {
"message": "注意，有的飛控帶有 MinimOSD，可以通過scarab-osd來燒錄和設置，但是這樣的飛控不能通過此頁面來設置參數。"
},
"osdSetupProfilesTitle": {
"message": "OSD 配置文件編號",
"description": "Description of the header of the OSD elements column associated to each profile"
},
"osdSetupElementsTitle": {
"message": "元素"
},
"osdSetupPreviewTitle": {
"message": "拖動元素以更改位置",
"description": "Indicates in the preview window of the OSD that the user can drag the elements to reorder them"
},
"osdSetupPreviewSelectProfileTitle": {
"message": "預覽",
"description": "Label of the selector for the OSD Profile in the preview. KEEP IT SHORT!!!"
},
"osdSetupPreviewForTitle": {
"message": "在此處更改配置文件或者字體僅影響預覽窗口而不會改變飛控中的配置文件或者字體。如果您想更改飛控，則必須分別使用 '$t(osdSetupSelectedProfileTitle.message)' 選項或者 '$t(osdSetupFontManager.message)' 按鈕。",
"description": "Help content for the OSD profile and font PREVIEW"
},
"osdSetupSelectedProfileTitle": {
"message": "激活 OSD 配置文件",
"description": "Title of the box to select the current active OSD profile"
},
"osdSetupSelectedProfileLabel": {
"message": "當前：",
"description": "Label for the selection of the curren active OSD profile"
},
"osdSetupPreviewSelectProfileElement": {
"message": "OSD 配置文件 {{profileNumber}}",
"description": "Content of the selector for the OSD Profile in the preview"
},
"osdSetupPreviewSelectFontElement": {
"message": "字體 {{fontName}}",
"description": "Content of the selector for the OSD Font in the preview"
},
"osdSetupVideoFormatTitle": {
"message": "視頻制式"
},
"osdSetupVideoFormatOptionAuto": {
"message": "自動",
"description": "Option for the video format in the OSD"
},
"osdSetupVideoFormatOptionPal": {
"message": "PAL",
"description": "Option for the video format in the OSD"
},
"osdSetupVideoFormatOptionNtsc": {
"message": "NTSC",
"description": "Option for the video format in the OSD"
},
"osdSetupUnitsTitle": {
"message": "單位制式"
},
"osdSetupUnitsOptionImperial": {
"message": "英制",
"description": "Option for the units system used in the OSD"
},
"osdSetupUnitsOptionMetric": {
"message": "公制",
"description": "Option for the units system used in the OSD"
},
"osdSetupTimersTitle": {
"message": "計時器"
},
"osdSetupAlarmsTitle": {
"message": "警報"
},
"osdSetupStatsTitle": {
"message": "飛行統計數據"
},
"osdSetupVtxTitle": {
"message": "圖傳設置"
},
"osdSetupCraftNameTitle": {
"message": "飛行器名稱"
},
"osdSetupWarningsTitle": {
"message": "警告"
},
"osdSetupFontPresets": {
"message": "預置字體"
},
"osdSetupFontPresetsSelector": {
"message": "選擇預設字體："
},
"osdSetupFontPresetsSelectorCustomOption": {
"message": "用戶提供的字體",
"description": "Option to show as selected when the user selects a custom local font"
},
"osdSetupFontPresetsSelectorOr": {
"message": "或"
},
"osdSetupOpenFont": {
"message": "打開字體文件"
},
"osdSetupCustomLogoTitle": {
"message": "啟動徽標:"
},
"osdSetupCustomLogoOpenImageButton": {
"message": "選擇自定義圖像…"
},
"osdSetupCustomLogoInfoTitle": {
"message": "自定义图像:"
},
"osdSetupCustomLogoInfoImageSize": {
"message": "大小必須是 $t(logoWidthPx) x$t(logoHeightPx) 像素"
},
"osdSetupCustomLogoInfoColorMap": {
"message": "必須是綠色、黑色和白色像素"
},
"osdSetupCustomLogoInfoUploadHint": {
"message": "單擊 $t(osdSetupUploadFont.message) 以保存自定義徽標"
},
"osdSetupCustomLogoImageSizeError": {
"message": "無效的圖像大小: {{width}}x{{height}} (應是 $t(logoWidthPx) x$t(logoHeightPx))"
},
"osdSetupCustomLogoColorMapError": {
"message": "圖像包含無效的像素： rgb ({{valueR}}, {{valueG}}, {{valueB}}) ，坐標 {{posX}}x{{posY}}"
},
"osdSetupUploadFont": {
"message": "更新字體"
},
"osdSetupUploadingFont": {
"message": "正在上傳..."
},
"osdSetupUploadingFontEnd": {
"message": "將全部 {{length}} 個字符上傳到 OSD"
},
"osdSetupSave": {
"message": "保存"
},
"osdSetupFontManager": {
"message": "字型管理器"
},
"osdSetupUncheckAll": {
"message": "取消全選"
},
"osdSetupHead": {
"message": "訊息"
},
"osdSetupVideoMode": {
"message": "視頻模式"
},
"osdSetupCameraConnected": {
"message": "攝像頭已連線。"
},
"osdSetupResetText": {
"message": "恢復 OSD 默認設置"
},
"osdSetupButtonReset": {
"message": "恢復默認設置"
},
"osdTextElementMainBattVoltage": {
"message": "電池電壓",
"description": "One of the elements of the OSD"
},
"osdDescElementMainBattVoltage": {
"message": "實時電壓 (低於警告電壓時會閃爍)"
},
"osdTextElementRssiValue": {
"message": "RSSI 值",
"description": "One of the elements of the OSD"
},
"osdDescElementRssiValue": {
"message": "實時 RSSI 值 (訊號強度低於設定值時會閃爍)"
},
"osdTextElementTimer": {
"message": "計時器",
"description": "One of the elements of the OSD"
},
"osdDescElementTimer": {
"message": "飛行計時器"
},
"osdTextElementThrottlePosition": {
"message": "油門位置",
"description": "One of the elements of the OSD"
},
"osdDescElementThrottlePosition": {
"message": "當前油門位置"
},
"osdTextElementCpuLoad": {
"message": "CPU 負載",
"description": "One of the elements of the OSD"
},
"osdDescElementCpuLoad": {
"message": "當前 CPU 負載"
},
"osdTextElementVtxChannel": {
"message": "圖傳頻道",
"description": "One of the elements of the OSD"
},
"osdDescElementVtxChannel": {
"message": "當前圖傳頻道和功率"
},
"osdTextElementVoltageWarning": {
"message": "電池電壓警告",
"description": "One of the elements of the OSD"
},
"osdDescElementVoltageWarning": {
"message": "當電壓處於報警值時顯示警告"
},
"osdTextElementArmed": {
"message": "已解鎖",
"description": "One of the elements of the OSD"
},
"osdDescElementArmed": {
"message": "解鎖文字提示"
},
"osdTextElementDisarmed": {
"message": "已上鎖",
"description": "One of the elements of the OSD"
},
"osdDescElementDisarmed": {
"message": "鎖定文字提示"
},
"osdTextElementCrosshairs": {
"message": "十字準星",
"description": "One of the elements of the OSD"
},
"osdDescElementCrosshairs": {
"message": "熒幕中間的十字光標"
},
"osdTextElementArtificialHorizon": {
"message": "人工地平線",
"description": "One of the elements of the OSD"
},
"osdDescElementArtificialHorizon": {
"message": "圖形化人工地平線"
},
"osdTextElementHorizonSidebars": {
"message": "人工地平線側標尺",
"description": "One of the elements of the OSD"
},
"osdDescElementHorizonSidebars": {
"message": "人工地平線旁邊顯示的邊欄"
},
"osdTextElementCurrentDraw": {
"message": "實時電流",
"description": "One of the elements of the OSD"
},
"osdDescElementCurrentDraw": {
"message": "實時電流"
},
"osdTextElementMahDrawn": {
"message": "電池已消耗毫安數",
"description": "One of the elements of the OSD"
},
"osdDescElementMahDrawn": {
"message": "累計已用電池容量"
},
"osdTextElementCraftName": {
"message": "飛行器名稱",
"description": "One of the elements of the OSD"
},
"osdDescElementCraftName": {
"message": "設置頁面裡設置的飛行器名稱"
},
"osdTextElementAltitude": {
"message": "海拔高度",
"description": "One of the elements of the OSD"
},
"osdDescElementAltitude": {
"message": "當前高度 (當超過設置的警告高度時會閃爍)"
},
"osdTextElementOnTime": {
"message": "啟動時間",
"description": "One of the elements of the OSD"
},
"osdDescElementOnTime": {
"message": "累計上電時間"
},
"osdTextElementFlyTime": {
"message": "飛行時間",
"description": "One of the elements of the OSD"
},
"osdDescElementFlyTime": {
"message": "已解鎖時間 （超過設定值時會閃爍）"
},
"osdTextElementFlyMode": {
"message": "飛行模式",
"description": "One of the elements of the OSD"
},
"osdDescElementFlyMode": {
"message": "當前飛行模式"
},
"osdTextElementGPSSpeed": {
"message": "GPS 速度",
"description": "One of the elements of the OSD"
},
"osdDescElementGPSSpeed": {
"message": "GPS 提供的速度訊息"
},
"osdTextElementGPSSats": {
"message": "GPS 衛星數",
"description": "One of the elements of the OSD"
},
"osdDescElementGPSSats": {
"message": "GPS 鎖定衛星數"
},
"osdTextElementGPSLon": {
"message": "GPS 經度",
"description": "One of the elements of the OSD"
},
"osdDescElementGPSLon": {
"message": "GPS 經度坐標"
},
"osdTextElementGPSLat": {
"message": "GPS 緯度",
"description": "One of the elements of the OSD"
},
"osdDescElementGPSLat": {
"message": "GPS 緯度坐標"
},
"osdTextElementDebug": {
"message": "調試",
"description": "One of the elements of the OSD"
},
"osdDescElementDebug": {
"message": "調試變數"
},
"osdTextElementPIDRoll": {
"message": "PID roll",
"description": "One of the elements of the OSD"
},
"osdDescElementPIDRoll": {
"message": "橫滾 PID 增益"
},
"osdTextElementPIDPitch": {
"message": "PID P軸",
"description": "One of the elements of the OSD"
},
"osdDescElementPIDPitch": {
"message": "俯仰 PID 增益"
},
"osdTextElementPIDYaw": {
"message": "偏航 PID ",
"description": "One of the elements of the OSD"
},
"osdDescElementPIDYaw": {
"message": "偏航 PID 增益"
},
"osdTextElementPower": {
"message": "功率",
"description": "One of the elements of the OSD"
},
"osdDescElementPower": {
"message": "實時功率消耗"
},
"osdTextElementPIDRateProfile": {
"message": "配置文件: PID 和 Rate",
"description": "One of the elements of the OSD"
},
"osdDescElementPIDRateProfile": {
"message": "當前 PID 和 Rate 配置文件的數字編號"
},
"osdTextElementBatteryWarning": {
"message": "電池警告",
"description": "One of the elements of the OSD"
},
"osdDescElementBatteryWarning": {
"message": "當電池電壓低於設定閾值時的警告文字提示"
},
"osdTextElementAvgCellVoltage": {
"message": "電池平均單芯電壓",
"description": "One of the elements of the OSD"
},
"osdDescElementAvgCellVoltage": {
"message": "平均單芯電壓 （電池總電壓 / 芯數）"
},
"osdTextElementPitchAngle": {
"message": "角度: pitch",
"description": "One of the elements of the OSD"
},
"osdDescElementPitchAngle": {
"message": "俯仰角度數字"
},
"osdTextElementRollAngle": {
"message": "角度: roll",
"description": "One of the elements of the OSD"
},
"osdDescElementRollAngle": {
"message": "橫滾角度數字"
},
"osdTextElementMainBattUsage": {
"message": "電池使用情況",
"description": "One of the elements of the OSD"
},
"osdDescElementMainBattUsage": {
"message": "圖形化顯示電池用量"
},
"osdTextElementArmedTime": {
"message": "計時器: 解鎖時間",
"description": "One of the elements of the OSD"
},
"osdDescElementArmedTime": {
"message": "距離上次解鎖時間"
},
"osdTextElementHomeDirection": {
"message": "到起飛點的方向",
"description": "One of the elements of the OSD"
},
"osdDescElementHomeDirection": {
"message": "指向起飛點的箭頭"
},
"osdTextElementHomeDistance": {
"message": "到起飛點的距離",
"description": "One of the elements of the OSD"
},
"osdDescElementHomeDistance": {
"message": "距離起飛點的距離 (單位為英尺或米，取決於系統設置)"
},
"osdTextElementNumericalHeading": {
"message": "數字式航向",
"description": "One of the elements of the OSD"
},
"osdDescElementNumericalHeading": {
"message": "當前行進方向的數字角度"
},
"osdTextElementNumericalVario": {
"message": "数字式垂直速度表",
"description": "One of the elements of the OSD"
},
"osdDescElementNumericalVario": {
"message": "爬升速度數字 (單位為英尺或米，取決於系統設置)"
},
"osdTextElementCompassBar": {
"message": "羅盤標尺",
"description": "One of the elements of the OSD"
},
"osdDescElementCompassBar": {
"message": "用以顯示當前飛行方向的羅盤標尺"
},
"osdTextElementWarnings": {
"message": "警告",
"description": "One of the elements of the OSD"
},
"osdDescElementWarnings": {
"message": "警報 (比如低電壓)，警告 (不能開鎖原因，電池電壓極低) 和模擬蜂鳴器(4個閃爍星號)。"
},
"osdTextElementEscTemperature": {
"message": "電調温度",
"description": "One of the elements of the OSD"
},
"osdDescElementEscTemperature": {
"message": "電調回傳溫度"
},
"osdTextElementEscRpm": {
"message": "電調轉速",
"description": "One of the elements of the OSD"
},
"osdDescElementEscRpm": {
"message": "電調回傳電機轉速"
},
"osdTextElementRemaningTimeEstimate": {
"message": "計時器: 預估剩餘時間",
"description": "One of the elements of the OSD"
},
"osdDescElementRemaningTimeEstimate": {
"message": "預計剩餘電池飛行時間"
},
"osdTextElementRtcDateTime": {
"message": "RTC日期和時間",
"description": "One of the elements of the OSD"
},
"osdDescElementRtcDateTime": {
"message": "日期/時間"
},
"osdTextElementAdjustmentRange": {
"message": "調整範圍",
"description": "One of the elements of the OSD"
},
"osdDescElementAdjustmentRange": {
"message": "調整範圍"
},
"osdTextElementTimer1": {
"message": "計時器 1",
"description": "One of the elements of the OSD"
},
"osdDescElementTimer1": {
"message": "顯示計時器 1"
},
"osdTextElementTimer2": {
"message": "計時器 2",
"description": "One of the elements of the OSD"
},
"osdDescElementTimer2": {
"message": "顯示計時器 2"
},
"osdTextElementCoreTemperature": {
"message": "核心溫度",
"description": "One of the elements of the OSD"
},
"osdDescElementCoreTemperature": {
"message": "顯示飛控主晶片溫度"
},
"osdTextAntiGravity": {
"message": "反重力",
"description": "One of the elements of the OSD"
},
"osdDescAntiGravity": {
"message": "當反重力功能激活時顯示指示器"
},
"osdTextGForce": {
"message": "G力",
"description": "One of the elements of the OSD"
},
"osdDescGForce": {
"message": "顯示當前飛機所受G力"
},
"osdTextElementMotorDiag": {
"message": "電機診斷",
"description": "One of the elements of the OSD"
},
"osdDescElementMotorDiag": {
"message": "顯示每個電機輸出的圖表"
},
"osdTextElementLogStatus": {
"message": "黑盒日誌狀態",
"description": "One of the elements of the OSD"
},
"osdDescElementLogStatus": {
"message": "黑盒日誌編號和警告"
},
"osdTextElementFlipArrow": {
"message": "反烏龜箭頭",
"description": "One of the elements of the OSD"
},
"osdDescElementFlipArrow": {
"message": "在反烏龜模式中，箭頭指示哪邊的電機朝上"
},
"osdTextElementLinkQuality": {
"message": "連接質量",
"description": "One of the elements of the OSD"
},
"osdDescElementLinkQuality": {
"message": "基於幀丟失情況的“連接質量”的替代圖標-請謹慎使用"
},
"osdTextElementFlightDist": {
"message": "飛行距離",
"description": "One of the elements of the OSD"
},
"osdDescElementFlightDist": {
"message": "此次飛行中的飛行距離"
},
"osdTextElementStickOverlayLeft": {
"message": "搖桿左浮層",
"description": "One of the elements of the OSD"
},
"osdDescElementStickOverlayLeft": {
"message": "遙控器左搖桿的浮層位置"
},
"osdTextElementStickOverlayRight": {
"message": "搖桿右浮層",
"description": "One of the elements of the OSD"
},
"osdDescElementStickOverlayRight": {
"message": "遙控器右搖桿的浮層位置"
},
"osdTextElementDisplayName": {
"message": "顯示名稱",
"description": "One of the elements of the OSD"
},
"osdDescElementDisplayName": {
"message": "由CLI命令\"display_name\"設置的顯示名稱"
},
"osdTextElementEscRpmFreq": {
"message": "電調轉速頻率",
"description": "One of the elements of the OSD"
},
"osdDescElementEscRpmFreq": {
"message": "電調回傳電機轉速頻率"
},
"osdTextElementRateProfileName": {
"message": "配置文件: Rate 配置文件名稱",
"description": "One of the elements of the OSD"
},
"osdDescElementRateProfileName": {
"message": "顯示當前 Rate 配置文件名稱"
},
"osdTextElementPidProfileName": {
"message": "配置文件：PID 配置文件名稱",
"description": "One of the elements of the OSD"
},
"osdDescElementPidProfileName": {
"message": "顯示當前 PID 配置文件名稱"
},
"osdTextElementOsdProfileName": {
"message": "配置文件: OSD 配置文件名稱",
"description": "One of the elements of the OSD"
},
"osdDescElementOsdProfileName": {
"message": "在 CLI 中設置的 \"osd_profile_1_name\", \"osd_profile_2_name\" 和 \"osd_profile_3_name\" 所對應的 OSD 配置文件名稱"
},
"osdTextElementRssiDbmValue": {
"message": "RSSI dBm 值",
"description": "One of the elements of the OSD"
},
"osdDescElementRssiDbmValue": {
"message": "RSSI 訊號的 dBm 值 （如果可用）"
},
"osdTextElementRcChannels": {
"message": "RC 通道",
"description": "One of the elements of the OSD"
},
"osdDescElementRcChannels": {
"message": "最多顯示4個通道的值。通道須由 CLI 變量 ‘osd_rcchannels’ 來指定"
},
"osdTextElementCameraFrame": {
"message": "相機取景框",
"description": "One of the elements of the OSD"
},
"osdTextElementEfficiency": {
"message": "電池效率",
"description": "One of the elements of the OSD"
},
"osdDescElementEfficiency": {
"message": "以 毫安時/距離 為單位的瞬時電池消耗量 (需要有效的 GPS 定位)"
},
"osdTextElementUnknown": {
"message": "未知 $1",
"description": "One of the elements of the OSD"
},
"osdDescElementUnknown": {
"message": "未知元素 (會在將來的版本中添加詳細訊息)"
},
"osdTextStatMaxSpeed": {
"message": "速度最大值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMaxSpeed": {
"message": "記錄到的最大速度"
},
"osdTextStatMinBattery": {
"message": "電池電壓最小值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMinBattery": {
"message": "記錄到的最低電池電壓"
},
"osdTextStatMinRssi": {
"message": "RSSI 最小值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMinRssi": {
"message": "記錄到的最小 RSSI 值"
},
"osdTextStatMaxCurrent": {
"message": "電池電流最大值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMaxCurrent": {
"message": "記錄到的最大電流"
},
"osdTextStatUsedMah": {
"message": "電池已使用毫安數",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatUsedMah": {
"message": "已用電池容量"
},
"osdTextStatMaxAltitude": {
"message": "最大高度",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMaxAltitude": {
"message": "記錄到的最大高度"
},
"osdTextStatBlackbox": {
"message": "黑盒使用情況",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatBlackbox": {
"message": "黑盒空間使用百分比"
},
"osdTextStatEndBattery": {
"message": "電池電壓截止值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatEndBattery": {
"message": "鎖定時電池電壓"
},
"osdTextStatFlyTime": {
"message": "總飛行時間",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatFlyTime": {
"message": "解鎖總時間"
},
"osdTextStatArmedTime": {
"message": "上次解鎖總飛行時間",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatArmedTime": {
"message": "距離上次解鎖時間"
},
"osdTextStatMaxDistance": {
"message": "距起飛點最大距離",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMaxDistance": {
"message": "距離起飛位置最远距離"
},
"osdTextStatBlackboxLogNumber": {
"message": "黑盒日誌編號",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatBlackboxLogNumber": {
"message": "黑盒日誌文件編號"
},
"osdTextStatTimer1": {
"message": "計時器 1",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatTimer1": {
"message": "上鎖時計時器 1的數值"
},
"osdTextStatTimer2": {
"message": "計時器 2",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatTimer2": {
"message": "上鎖時計時器 2的數值"
},
"osdTextStatRtcDateTime": {
"message": "RTC日期和時間",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatRtcDateTime": {
"message": "實時時鐘時間日期"
},
"osdTextStatBattery": {
"message": "電池電壓",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatBattery": {
"message": "電池實時電壓"
},
"osdTextStatGForce": {
"message": "G力最大值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatGForce": {
"message": "飛行器經歷的最大 G 力"
},
"osdTextStatEscTemperature": {
"message": "電調溫度最高值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatEscTemperature": {
"message": "電調最高溫度"
},
"osdTextStatEscRpm": {
"message": "電調轉速最大值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatEscRpm": {
"message": "電調最高轉速"
},
"osdTextStatMinLinkQuality": {
"message": "連接質量最小值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMinLinkQuality": {
"message": "基於幀丟失情況的“連接質量”的替代圖標的最小值"
},
"osdTextStatFlightDistance": {
"message": "飛行距離",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatFlightDistance": {
"message": "此次飛行中的總行程"
},
"osdTextStatMaxFFT": {
"message": "FFT 最大值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMaxFFT": {
"message": "FFT 峰值頻率"
},
"osdTextStatTotalFlights": {
"message": "總飛行次數",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatTotalFlights": {
"message": "總飛行次數"
},
"osdTextStatTotalFlightTime": {
"message": "總飛行時間",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatTotalFlightTime": {
"message": "總飛行時間"
},
"osdTextStatTotalFlightDistance": {
"message": "總飛行距離",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatTotalFlightDistance": {
"message": "總航行距離"
},
"osdTextStatMinRssiDbm": {
"message": "RSSI dBm 最小值",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatMinRssiDbm": {
"message": "最小 RSSI 分貝值"
},
"osdTextStatUnknown": {
"message": "未知 $1",
"description": "One of the statistics that can be shown at the end of the flight in the OSD"
},
"osdDescStatUnknown": {
"message": "未知統計 (會在將來的版本中添加詳細訊息)"
},
"osdDescribeFontVersion1": {
"message": "字體版本: 1 (Betaflight 4.0或更舊版本)"
},
"osdDescribeFontVersion2": {
"message": "字體版本: 2 (Betaflight 4.1或更新版本)"
},
"osdDescribeFontVersionCUSTOM": {
"message": "字庫版本: 用戶提供"
},
"osdTimerSource": {
"message": "來源："
},
"osdTimerSourceTooltip": {
"message": "選擇時鐘源，這控制了計時器測量的持續時間/事件"
},
"osdTimerSourceOptionOnTime": {
"message": "總啟動時間",
"description": "One of the options for the source timer. This options shows the amount of time has passed since the battery was plugged"
},
"osdTimerSourceOptionTotalArmedTime": {
"message": "總解鎖時間",
"description": "One of the options for the source timer. This options shows the amount of time the craft was armed since the battery was plugged"
},
"osdTimerSourceOptionLastArmedTime": {
"message": "上次解鎖時間",
"description": "One of the options for the source timer. This options shows the amount of time the craft was armed the latest time"
},
"osdTimerSourceOptionOnArmTime": {
"message": "啟動/解鎖時間",
"description": "One of the options for the source timer. This option shows On time when craft is disarmed, and Armed time when armed"
},
"osdTimerPrecision": {
"message": "精度："
},
"osdTimerPrecisionTooltip": {
"message": "選擇計時器精度"
},
"osdTimerPrecisionOptionSecond": {
"message": "秒",
"description": "Selectable option for the precision of the timer in the OSD"
},
"osdTimerPrecisionOptionHundredth": {
"message": "百分之一秒",
"description": "Selectable option for the precision of the timer in the OSD"
},
"osdTimerPrecisionOptionTenth": {
"message": "十分之一秒",
"description": "Selectable option for the precision of the timer in the OSD"
},
"osdTimerAlarm": {
"message": "警報："
},
"osdTimerAlarmTooltip": {
"message": "設置計時器警報時間（分鐘）。當計時器時間大於設置時間，將會在OSD上面閃爍。設定為0可禁用報警。"
},
"osdTimerAlarmOptionRssi": {
"message": "RSSI",
"description": "Text of the RSSI alarm"
},
"osdTimerAlarmOptionCapacity": {
"message": "容量",
"description": "Text of the capacity alarm"
},
"osdTimerAlarmOptionAltitude": {
"message": "海拔高度",
"description": "Text of the altitude alarm"
},
"osdWarningTextArmingDisabled": {
"message": "禁止解鎖",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningArmingDisabled": {
"message": "顯示導致不能解鎖最主要的原因"
},
"osdWarningTextBatteryNotFull": {
"message": "電池不滿",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningBatteryNotFull": {
"message": "當上電時檢測到電池電量不滿發出警告"
},
"osdWarningTextBatteryWarning": {
"message": "電池警告",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningBatteryWarning": {
"message": "當電池電壓低於設置警報電壓時發出警告"
},
"osdWarningTextBatteryCritical": {
"message": "電池電量危急",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningBatteryCritical": {
"message": "電池電壓低於最小單芯電壓時發出警告"
},
"osdWarningTextVisualBeeper": {
"message": "模擬蜂鳴器",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningVisualBeeper": {
"message": "顯示模擬蜂鳴器（表現為4個星號）"
},
"osdWarningTextCrashFlipMode": {
"message": "反烏龜模式",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningCrashFlipMode": {
"message": "當激活反烏龜模式時發出警告"
},
"osdWarningTextEscFail": {
"message": "電調通訊失敗",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningEscFail": {
"message": "列舉一個出現故障的電調/電機的列表 (RPM 或溫度超出配置的閾值)"
},
"osdWarningTextCoreTemperature": {
"message": "核心溫度",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningCoreTemperature": {
"message": "當 MCU 核心溫度超過配置的閾值時發出警告"
},
"osdWarningTextRcSmoothingFailure": {
"message": "RC 平滑失敗",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningRcSmoothingFailure": {
"message": "當 RC 平滑初始化失敗時發出警告"
},
"osdWarningTextFailsafe": {
"message": "失控保護",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningFailsafe": {
"message": "發生失控保護時發出警告"
},
"osdWarningTextLaunchControl": {
"message": "起飛控制",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningLaunchControl": {
"message": "起飛控制模式被激活時發出警告"
},
"osdWarningTextGpsRescueUnavailable": {
"message": "GPS 救援不可用",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningGpsRescueUnavailable": {
"message": "當 GPS 救援不可用且無法激活時發出警告"
},
"osdWarningTextGpsRescueDisabled": {
"message": "GPS 救援已禁用",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningGpsRescueDisabled": {
"message": "GPS 救援被禁用時發出警告"
},
"osdWarningTextRSSI": {
"message": "RSSI",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningRSSI": {
"message": "當 RSSI 低於報警設置時發出警告"
},
"osdWarningTextLinkQuality": {
"message": "連接質量",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningLinkQuality": {
"message": "當連接質量低於報警設置時發出警告"
},
"osdWarningTextRssiDbm": {
"message": "RSSI 分貝",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningRssiDbm": {
"message": "當 RSSI 分貝低於報警設置時發出警告"
},
"osdWarningTextOverCap": {
"message": "過放的電池容量",
"description": "One of the warnings that can be selected to be shown in the OSD"
},
"osdWarningOverCap": {
"message": "當已消耗的毫安數超過配置的容量極限時發出警告"
},
"osdWarningTextUnknown": {
"message": "未知 $1"
},
"osdWarningUnknown": {
"message": "未知警告 (會在將來的版本中添加詳細訊息)"
},
"osdSectionHelpElements": {
"message": "顯示或者隱藏 OSD 元素"
},
"osdSectionHelpVideoMode": {
"message": "設置期望的攝像頭視頻格式。 （通常可以使用 AUTO 自動檢測，如果遇到問題再手動指定）。"
},
"osdSectionHelpUnits": {
"message": "設置單位制"
},
"osdSectionHelpTimers": {
"message": "設置飛行計時器"
},
"osdSectionHelpAlarms": {
"message": "設置OSD報警閾值"
},
"osdSectionHelpStats": {
"message": "設置飛行結束上鎖後熒幕上顯示的統計訊息"
},
"osdSectionHelpWarnings": {
"message": "顯示或隱藏顯示在警告區域的警告訊息"
},
"osdSettingsSaved": {
"message": "OSD 設置已保存"
},
"osdWritePermissions": {
"message": "您沒有此文件的 "
},
"osdButtonSaved": {
"message": "已儲存"
},
"vtxHelp": {
"message": "這裡可以定義圖傳用到的值。如果你的圖傳支援，你可以查看和修改發送功率和圖傳表。
按以下步驟設置你的圖傳：
1. 打開這個頁面；
2. 找到並下載適合你的圖傳型號和所在地區的圖傳配置文件；
3. 點擊下方'$t(vtxButtonLoadFile.message)'，選擇並加載圖傳配置文件；
4. 確認設置正確；
5. 點擊'$t(vtxButtonSave.message)'保存圖傳設置到飛控。
6. （可選）點擊'$t(vtxButtonSaveLua.message)'保存 Lua 配置文件供 Betaflight Lua 腳本使用。 （在這裡查看更多。）",
"description": "Introduction message in the VTX tab"
},
"vtxMessageNotSupported": {
"message": "您的圖傳未配置或不支援。所以您不能在此修改圖傳值。只有當圖傳使用Tramp或SmartAudio等協議，連接到飛行控制器，並在$t(tabPorts.message)頁面中正確配置後，才可以使用。",
"description": "Message to show when the VTX is not supported in the VTX tab"
},
"vtxMessageTableNotConfigured": {
"message": "在使用$t(vtxSelectedMode.message)之前，必須先在下面配置並保存圖傳表",
"description": "Message to show when the VTX is not supported in the VTX tab"
},
"vtxMessageFactoryBandsNotSupported": {
"message": " 選定的圖傳不支援以“工廠模式”設置頻段，但您的部分頻段設置中使用了這個功能。點擊 '$t(vtxButtonSave.message)' 以修復這個問題。",
"description": "Message to show when the configured VTX type does not support factory bands, but one or more of the configured bands are of this type"
},
"vtxMessageVerifyTable": {
"message": "圖傳表內容已加載，但尚未存儲至飛行控制器。您必須驗證和修改部分數值，以確保其在您的國家有效且合法，然後點擊$t(vtxButtonSave.message)按鈕來將其儲存至飛行控制器上。",
"description": "Message to show when the VTX Table has been loaded from a external source"
},
"vtxFrequencyChannel": {
"message": "直接輸入頻率",
"description": "Text of one of the fields of the VTX tab"
},
"vtxFrequencyChannelHelp": {
"message": "如果您啟用此功能，配置器將會讓您直接選擇特定頻率而不是常見的頻段/頻道。為了使其工作，您的圖傳必須支援此功能。",
"description": "Help text for the frequency or channel select field of the VTX tab"
},
"vtxSelectedMode": {
"message": "選擇模式",
"description": "Title for the actual mode header of the VTX"
},
"vtxActualState": {
"message": "當前值",
"description": "Title for the actual values header of the VTX"
},
"vtxType": {
"message": "圖傳類型",
"description": "Text of one of the fields of the VTX tab"
},
"vtxType_0": {
"message": "不支援",
"description": "Text for one of the types of the VTX type in VTX tab"
},
"vtxType_1": {
"message": "RTC607",
"description": "Text for one of the types of the VTX type in VTX tab"
},
"vtxType_3": {
"message": "SmartAudio",
"description": "Text for one of the types of the VTX type in VTX tab"
},
"vtxType_4": {
"message": "Tramp",
"description": "Text for one of the types of the VTX type in VTX tab"
},
"vtxType_255": {
"message": "未知",
"description": "Text for one of the types of the VTX type in VTX tab"
},
"vtxBand": {
"message": "頻段",
"description": "Text of one of the fields of the VTX tab"
},
"vtxBandHelp": {
"message": "你可以為你的圖傳選擇頻段",
"description": "Help text for the band field of the VTX tab"
},
"vtxBand_0": {
"message": "無",
"description": "Text of one of the options for the band field of the VTX tab"
},
"vtxBand_X": {
"message": "頻段 {{bandName}}",
"description": "Text of one of the options for the band field of the VTX tab"
},
"vtxChannel_0": {
"message": "無",
"description": "Text of one of the options for the channel field of the VTX tab"
},
"vtxChannel_X": {
"message": "頻道 {{channelName}}",
"description": "Text of one of the options for the channel field of the VTX tab"
},
"vtxPower_0": {
"message": "無",
"description": "Text of one of the options for the power field of the VTX tab"
},
"vtxPower_X": {
"message": "級別 {{powerLevel}}",
"description": "Text of one of the options for the power field of the VTX tab"
},
"vtxChannel": {
"message": "頻道",
"description": "Text of one of the fields of the VTX tab"
},
"vtxChannelHelp": {
"message": "你可以為你的圖傳選擇頻道",
"description": "Help text for the channel field of the VTX tab"
},
"vtxFrequency": {
"message": "頻率",
"description": "Text of one of the fields of the VTX tab"
},
"vtxFrequencyHelp": {
"message": "您可以在此為您的圖傳選擇它所支援的頻率",
"description": "Help text for the frequency field of the VTX tab"
},
"vtxDeviceReady": {
"message": "設備已就緒",
"description": "Text of one of the fields of the VTX tab"
},
"vtxPower": {
"message": "功率",
"description": "Text of one of the fields of the VTX tab"
},
"vtxPowerHelp": {
"message": "在此選擇圖傳的功率。如果啟用 $t(vtxPitMode.message) 或 $t(vtxLowPowerDisarm.message) 則可使用它來更改。",
"description": "Help text for the power field of the VTX tab"
},
"vtxPitMode": {
"message": "維修站模式(Pit Mode)",
"description": "Text of one of the fields of the VTX tab"
},
"vtxPitModeFrequency": {
"message": "維修站模式頻率",
"description": "Text of one of the fields of the VTX tab"
},
"vtxPitModeFrequencyHelp": {
"message": "當啟用維修站模式時所使用的頻率",
"description": "Help text for the pit mode field of the VTX tab"
},
"vtxLowPowerDisarm": {
"message": "低功率上鎖",
"description": "Text of one of the fields of the VTX tab"
},
"vtxLowPowerDisarmHelp": {
"message": "啟用後，圖傳將在上鎖後保持最低功率(除非觸發了失控保護)",
"description": "Help text for the low power disarm field of the VTX tab"
},
"vtxLowPowerDisarmOption_0": {
"message": "關閉",
"description": "One of the options for the Low Power Disarm mode of the VTX"
},
"vtxLowPowerDisarmOption_1": {
"message": "開啟",
"description": "One of the options for the Low Power Disarm mode of the VTX"
},
"vtxLowPowerDisarmOption_2": {
"message": "保持直至解鎖",
"description": "One of the options for the Low Power Disarm mode of the VTX"
},
"vtxTable": {
"message": "圖傳表",
"description": "Text of the header of the VTX Table element in the VTX tab"
},
"vtxTablePowerLevels": {
"message": "功率級別數量",
"description": "Text of one of the fields of the VTX Table element in the VTX tab"
},
"vtxTablePowerLevelsHelp": {
"message": "它定義了您的图传所支援的功率的數量",
"description": "Help for the number of power levels field of the VTX Table element in the VTX tab"
},
"vtxTablePowerLevelsValue": {
"message": "值",
"description": "Text of one of the fields of the VTX Table element in the VTX tab"
},
"vtxTablePowerLevelsLabel": {
"message": "標籤",
"description": "Text of one of the fields of the VTX Table element in the VTX tab"
},
"vtxTableBands": {
"message": "頻段數量",
"description": "Text of one of the fields of the VTX Table element in the VTX tab"
},
"vtxTableChannels": {
"message": "頻段內的頻道數",
"description": "Text of one of the fields of the VTX Table element in the VTX tab"
},
"vtxTableBandsChannelsHelp": {
"message": "這裡定義你希望圖傳用到的頻段數量和頻道數量。",
"description": "Help for the number of bands and channels field of the VTX Table element in the VTX tab"
},
"vtxTableBandTitleName": {
"message": "名稱",
"description": "Text of one of the titles of the VTX Table element in the VTX tab"
},
"vtxTableBandTitleLetter": {
"message": "字母",
"description": "Text of one of the titles of the VTX Table element in the VTX tab"
},
"vtxTableBandTitleFactory": {
"message": "工廠模式",
"description": "Text of one of the titles of the VTX Table element in the VTX tab"
},
"vtxSavedFileOk": {
"message": "圖傳配置文件",
"description": "Message in the GUI log when the VTX Config file is saved"
},
"vtxSavedFileKo": {
"message": "加載圖傳配置文件",
"description": "Message in the GUI log when the VTX Config file is saved"
},
"vtxLoadFileOk": {
"message": "圖傳配置文件",
"description": "Message in the GUI log when the VTX Config file is loaded"
},
"vtxLoadFileKo": {
"message": "加載圖傳配置文件",
"description": "Message in the GUI log when the VTX Config file is loaded"
},
"vtxLoadClipboardOk": {
"message": "已從剪貼板 圖傳配置訊息",
"description": "Message in the GUI log when the VTX Config file is pasted from clipboard"
},
"vtxLoadClipboardKo": {
"message": "當從剪貼板加載圖傳配置訊息時發生。內容可能不正確",
"description": "Message in the GUI log when the VTX Config file is pasted from clipboard"
},
"vtxButtonSaveFile": {
"message": "保存到文件",
"description": "Save to file button in the VTX tab"
},
"vtxButtonSaveLua": {
"message": "保存 Lua 腳本",
"description": "Save Lua script button in the VTX tab"
},
"vtxButtonLoadFile": {
"message": "從文件加載",
"description": "Load to file button in the VTX tab"
},
"vtxButtonLoadClipboard": {
"message": "從剪貼板加載",
"description": "Paste from clipboard button in the VTX tab"
},
"vtxButtonSave": {
"message": "保存",
"description": "Save button in the VTX tab"
},
"vtxButtonSaved": {
"message": "已保存",
"description": "Saved action button in the VTX tab"
},
"mainHelpArmed": {
"message": "電機解鎖"
},
"mainHelpFailsafe": {
"message": "失控保護模式"
},
"mainHelpLink": {
"message": "串口連接狀態"
},
"configurationEscProtocol": {
"message": "電調/電機協議"
},
"configurationEscProtocolHelp": {
"message": "選擇電調協議。
請確認你的電調支援該協議，電調製造商應該有提供這些訊息。
選擇 DSHOT900 或 DSHOT1200 時請注意，目前沒有很多電調支援這個協議！ "
},
"configurationEscProtocolHelpNoDSHOT1200": {
"message": "選擇您的電機協議。
請驗證您的電調支援此協議，此訊息應在製造商的網站上。"
},
"configurationunsyndePwm": {
"message": "電機PWM速度獨立於PID速度"
},
"configurationUnsyncedPWMFreq": {
"message": "電機 PWM 頻率"
},
"configurationDshotBidir": {
"message": "雙向 DSHOT (需要電調固件支援)",
"description": "Feature for the ESC/Motor"
},
"configurationDshotBidirHelp": {
"message": "向飛控板發送電調數據。 RPM 濾波器和動態怠速需要這個功能。
注意：需要使用兼容的電調固件，例如JESC、JazzMac、BLHeli_32。",
"description": "Description of the Bidirectional DShot feature of the ESC/Motor"
},
"configurationGyroSyncDenom": {
"message": "陀螺儀更新頻率"
},
"configurationPidProcessDenom": {
"message": "PID 循環更新頻率"
},
"configurationPidProcessDenomHelp": {
"message": "PID 循環的最大頻率會受限於所選電機、電調協議所決定的最大更新頻率。"
},
"configurationGyroUse32kHz": {
"message": "啟用陀螺儀 32kHz 採樣模式"
},
"configurationGyroUse32kHzHelp": {
"message": "僅當陀螺儀晶片支援時才能啟用 32khz 採樣頻率。 （目前有通過 SPI 總線連接的 MPU6500、MPU9250 和 ICM20xxx 系列）。如不能確定請查詢你的飛控板資料。"
},
"configurationAccHardware": {
"message": "加速度計"
},
"configurationBaroHardware": {
"message": "氣壓計 （如有）"
},
"configurationMagHardware": {
"message": "磁力计 （如有）"
},
"configurationSmallAngle": {
"message": "最大允許解鎖角度 [degrees]"
},
"configurationSmallAngleHelp": {
"message": "如果飛機傾斜的角度大於指定的允許解鎖角度，飛控將會不允許解鎖。只有啟用了加速度計該功能才能工作。設置為180度相當於關閉了傾斜角度檢測。"
},
"configurationBatteryVoltage": {
"message": "電池電壓"
},
"configurationBatteryCurrent": {
"message": "電池電流"
},
"configurationBatteryMeterType": {
"message": "電池計量類型"
},
"configurationBatteryMinimum": {
"message": "最低單芯電壓"
},
"configurationBatteryMaximum": {
"message": "最高單芯電壓"
},
"configurationBatteryWarning": {
"message": "單芯警告電壓"
},
"configurationBatteryScale": {
"message": "電壓計比例"
},
"configurationCurrentMeterType": {
"message": "電流計類型"
},
"configurationCurrent": {
"message": "電流傳感器"
},
"configurationCurrentScale": {
"message": "按比例 [1/10 mV/A] 將電壓縮放到毫安"
},
"configurationCurrentOffset": {
"message": "補償（單位毫伏）"
},
"configurationBatteryMultiwiiCurrent": {
"message": "啟用對傳統 Multiwii MSP 電流計輸出的支援"
},
"pidTuningProfile": {
"message": "PID 配置文件"
},
"pidTuningProfileTip": {
"message": "飛控可以保存最多3個（有的只能2個）PID 配置文件。 PID 配置文件包括：PID值， D 設置點，angle/horizon 模式選擇設置。配置文件可以通過遙控搖桿命令來回切換(具體操作參閱網上教程)。"
},
"pidTuningRateProfile": {
"message": "Rate 配置文件"
},
"pidTuningRateProfileTip": {
"message": "飛控可以保存3個不同的Rate配置文件。 Rate配置文件包括：RC rate， Rate，RC expo，油門和TPA。配置文件可以通過遙控搖桿命令來回切換（具體操作參閱網上教程）。也可以通過一個3段的開關來選擇不同的配置文件。"
},
"pidTuningRateSetup": {
"message": "基本/手動 Rate"
},
"pidTuningRateSetupHelp": {
"message": "調整這些值，以確定您的Rate。使用RC Rate以提高總角速度，使用Super Rate以在搖桿末端獲得更高的角速度，使用RC Expo以在杆位中央附近獲得平滑感。",
"description": "Rate table helpicon message"
},
"pidTuningDelta": {
"message": "導數"
},
"pidTuningDeltaError": {
"message": "錯誤"
},
"pidTuningDeltaMeasurement": {
"message": "測量模式"
},
"pidTuningPidControllerTip": {
"message": "傳統 vs Betaflight (浮點數): PID 比例和 PID 邏輯是完全一樣的。理論上，在兩者之間進行切換不需要重新調參。傳統的也是betaflight參與的重寫算法，使用整數進行計算。 Betaflight PID 控制器使用浮點數進行計算，並專門為多軸飛行器設計了許多新功能
浮點vs 整數: PID 比例和PID邏輯完全一樣的. 理論上，在兩者之間進行切換不需要重新調參。 F1晶片缺乏FPU，使用浮點運算將會增加CPU負荷，使用整數運算會得到更加好的運行效果。但是浮點運算會獲得稍高的精準度。"
},
"pidTuningFilterTip": {
"message": "陀螺儀軟件濾波器： 陀螺儀的低通濾波。更低的數字會提供更多的過濾效果。
D Term 濾波器：Dterm 低通濾波器。會影響D值的調參，更低的數字會提供更多的過濾效果。
方向濾波器： 對偏航輸出進行濾波。對偏航軸震動或者噪聲很嚴重的情況會有幫助。"
},
"pidTuningRatesTip": {
"message": "嘗試不同的 Rates 並觀察它如何影響搖桿曲線"
},
"configurationCamera": {
"message": "攝像頭"
},
"configurationPersonalization": {
"message": "個性化"
},
"craftName": {
"message": "飛行器名稱"
},
"configurationFpvCamAngleDegrees": {
"message": "FPV攝像頭角度 [degrees]"
},
"onboardLoggingBlackbox": {
"message": "黑盒日誌記錄設備"
},
"onboardLoggingRateOfLogging": {
"message": "黑盒日誌記錄速率"
},
"onboardLoggingDebugMode": {
"message": "黑盒調試模式"
},
"onboardLoggingDebugModeUnknown": {
"message": "未知模式"
},
"onboardLoggingSerialLogger": {
"message": "外接串口日誌記錄設備"
},
"onboardLoggingFlashLogger": {
"message": "板載快閃記憶體"
},
"onboardLoggingEraseInProgress": {
"message": "正在擦除，請稍等…"
},
"onboardLoggingOnboardSDCard": {
"message": "板載SD卡"
},
"onboardLoggingMsc": {
"message": "大容量存儲模式"
},
"onboardLoggingMscNote": {
"message": "重新啟動進入 大容量存儲設備 (MSC) 模式。一旦激活, 您的飛行控制器上的板載快閃記憶體或 SD 卡將被計算機識別為存儲設備, 並允許您下載日誌文件。要退出此模式，請在電腦上執行彈出操作，並給飛控重新上電。"
},
"onboardLoggingRebootMscText": {
"message": "激活大容量存儲設備模式"
},
"onboardLoggingMscNotReady": {
"message": "由於存儲設備尚未就緒, 無法激活大容量存儲模式。"
},
"dialogConfirmResetTitle": {
"message": "確認"
},
"dialogConfirmResetNote": {
"message": "警告：確定要將所有設置重置到默認設置？"
},
"dialogConfirmResetConfirm": {
"message": "重置"
},
"dialogConfirmResetClose": {
"message": "取消"
},
"modeCameraWifi": {
"message": "攝像頭 WI-FI 按鍵"
},
"modeCameraPower": {
"message": "攝像頭電源按鍵"
},
"modeCameraChangeMode": {
"message": "攝像頭改變模式"
},
"flashTab": {
"message": "更新固件"
},
"cliAutoComplete": {
"message": "高級 CLI 自動填充"
},
"darkTheme": {
"message": "使用深色主題"
},
"pidTuningRatesType": {
"message": "Rate 類型"
},
"pidTuningRatesTypeTip": {
"message": "改變 Rate 類型將改變 Rate 曲線及配置方式"
},
"pidTuningRcRateRaceflight": {
"message": "Rate"
},
"pidTuningRcExpoRaceflight": {
"message": "Expo"
},
"pidTuningRateRaceflight": {
"message": "Acro+"
},
"pidTuningRcExpoKISS": {
"message": "RC 曲線"
},
"pidTuningRateQuickRates": {
"message": "最大角速率"
},
"pidTuningRcRateActual": {
"message": "中央靈敏度"
},
"dialogRatesTypeTitle": {
"message": "更改 Rate 類型"
},
"dialogRatesTypeNote": {
"message": "如果您更改 Rate 類型，您的 Rate 曲線將會重置為默認值。"
},
"dialogRatesTypeConfirm": {
"message": "更改"
},
"gpsSbasAutoDetect": {
"message": "自動檢測",
"description": "One of the options selectable for the GPS SBAS system"
},
"gpsSbasEuropeanEGNOS": {
"message": "歐洲 EGNOS",
"description": "One of the options selectable for the GPS SBAS system"
},
"gpsSbasNorthAmericanWAAS": {
"message": "北美 WAAS",
"description": "One of the options selectable for the GPS SBAS system"
},
"gpsSbasJapaneseMSAS": {
"message": "日本 MSAS",
"description": "One of the options selectable for the GPS SBAS system"
},
"gpsSbasIndianGAGAN": {
"message": "印度 GAGAN",
"description": "One of the options selectable for the GPS SBAS system"
},
"gpsSbasNone": {
"message": "無",
"description": "One of the options selectable for the GPS SBAS system"
},
"dialogFileNameTitle": {
"message": "檔案名稱"
},
"dialogFileAlreadyExistsTitle": {
"message": "該文件已經存在！"
},
"dialogFileAlreadyExistsDescription": {
"message": "是否複寫?"
},
"cordovaCheckingWebview": {
"message": "正在檢查 webview 應用程式..."
},
"cordovaIncompatibleWebview": {
"message": "不兼容的 webview"
},
"cordovaWebviewTroubleshootingMsg": {
"message": "您必須更新您設備的 webview 才能使用配置程式。"
},
"cordovaWebviewTroubleshootingMsg2": {
"message": "下面的工具旨在幫助您安裝一個新的 webview 或更新已安裝的 webview。"
},
"cordovaAvailableWebviews": {
"message": "您設備上可用的 webview 應用程式"
},
"cordovaWebviewInstall": {
"message": "安裝對應的 {{app}} 程式可以解決兼容性問題"
},
"cordovaWebviewInstallBtn": {
"message": "從 Google Play 商店安裝"
},
"cordovaWebviewUninstall": {
"message": "卸載 {{app}} 應用程序可以解決此兼容性問題。如果您無法卸載它，請嘗試從應用程序設置中禁用它。"
},
"cordovaWebviewUninstallBtn1": {
"message": "從 Google Play 商店解除安裝"
},
"cordovaWebviewUninstallBtn2": {
"message": "從設置中卸載 / 禁用"
},
"cordovaWebviewUpdate": {
"message": "更新 {{app}} 應用程式可以解決此兼容性問題。"
},
"cordovaWebviewUpdateBtn": {
"message": "從 Google Play 商店更新"
},
"cordovaWebviewEnable": {
"message": "在設置中進入您的設備信息頁面，點擊構建版本數字10次以啟用“開發者選項”。在此之後，搜索並進入開發者選項，並選擇 {{app}} 作為 webview 提供者。"
},
"cordovaWebviewEnableBtn": {
"message": "開啟設定"
},
"cordovaWebviewIncompatible": {
"message": "您的設備似乎不兼容。請嘗試搜索其他方式來更新您的 webview"
},
"cordovaNoWebview": {
"message": "沒有安裝/啟用 webview"
},
"cordovaWebviewUsed": {
"message": "已使用"
},
"cordovaExitAppTitle": {
"message": "確認"
},
"cordovaExitAppMessage": {
"message": "你確定要關閉配置程式嗎？"
}
}