marcroe
|
20b6d65576
|
support for removal of read protection
|
2016-11-29 02:46:25 +00:00 |
blckmn
|
5dbcd02148
|
Small fix for erase chip issue (F4 too much flash, and takes too long)
|
2016-11-19 10:29:06 +11:00 |
mikeller
|
b9b0ae542d
|
Fixed lockup on failed 'flash on connect' operation. Also removed persisting of 'flash on connect' option since it can lead to accidental flasing.
|
2016-10-30 19:34:30 +13:00 |
Marcin Baliniak
|
6fd16856ea
|
Add support for F1 High-density devices
|
2016-09-29 13:35:18 +02:00 |
nathan
|
cbb7122336
|
disable stats
|
2016-06-15 22:25:11 -07:00 |
Michael Corcoran
|
9fbb6337b6
|
DFU: Support STM32F4
|
2016-01-28 22:48:44 +13:00 |
|
Michael Corcoran
|
b46a5e8053
|
USB-DFU: Detect flash page size from USB descriptor
|
2016-01-25 19:27:26 +13:00 |
|
Michael Corcoran
|
1a20b317dd
|
DFU: Add additional error checks, enabled GUI connect lock while flashing
|
2015-10-15 13:00:43 +13:00 |
|
Michael Corcoran
|
1e386f508b
|
DFU: Add local erase, 2 kB page size hardcoded
Not possible to read chip ID using DFU or page size info from USB descriptor (not yet supported by Chrome)
|
2015-10-15 13:00:43 +13:00 |
|
Michael Corcoran
|
d89e9682c2
|
DFU: Make permissions compulsary, make DFU detection more robust
|
2015-10-15 13:00:43 +13:00 |
|
Michael Corcoran
|
88a59f05c9
|
STM32DFU: Remove line missed in c038785
|
2015-10-15 12:59:44 +13:00 |
|
Michael Corcoran
|
42a8d38e32
|
STM32: Check for DFU device after device reboot
|
2015-10-15 12:59:44 +13:00 |
|
Michael Corcoran
|
8b029edbcf
|
Enable flashing using USB-DFU protocol
For new boards like Tornado
|
2015-10-15 12:59:44 +13:00 |
Dominic Clifton
|
3086a98828
|
Add support for manual baud rate selection to firmware flasher.
|
2015-05-22 02:29:29 +01:00 |
|
Dominic Clifton
|
5471ab7f65
|
Add support for STM32 Extended Erase to allow erasing only needed pages.
|
2015-05-22 02:18:40 +01:00 |
|
Dominic Clifton
|
90cc08c86b
|
Test and cleanup STM32 extended erase bootloader command support.
Note: entire chip only for now - 'Full Chip Erase' checkbox is ignored.
|
2015-05-22 00:27:09 +01:00 |
Bart
|
ef682cdca9
|
STM F3 support
Partial F3 support. Should be enough to flash correctly.
Currently only full chip erase is supported.
IT IS NOT TESTED AT ALL as I don't have hardware
|
2015-05-19 03:04:40 +02:00 |
cTn
|
698aeb1bf9
|
correct callbacks in firmware flasher, optimize speed by updating UI between read/write operations
|
2014-11-15 13:44:12 +01:00 |
|
cTn
|
7a0d3a1199
|
handle all sorts of edge cases that would otherwise break UI or functionality
|
2014-11-11 11:59:12 +01:00 |
|
cTn
|
8fb24b3fa4
|
add callback to flashing protocols (no status yet)
|
2014-10-01 15:55:11 +02:00 |
|
cTn
|
3312bf5df2
|
fix timers
|
2014-10-01 15:18:37 +02:00 |
|
cTn
|
b5aeb8df2a
|
fix typo
|
2014-08-31 15:55:12 +02:00 |
|
cTn
|
37de8dfefa
|
new simplified flasher status UI
|
2014-08-30 10:30:28 +02:00 |
|
cTn
|
322af92d45
|
add / implement flash slowly option in firmware flasher
this will allow flashing via serial adapters that doesn't support 921600
flashing via various bluetooth adapters will be also possible now
(untested)
|
2014-08-30 08:59:21 +02:00 |
|
cTn
|
6dec7dfbc1
|
if unexpected data is received, throw an error instead of log, this will also attach a stack trace for easier debugging
|
2014-08-30 08:35:09 +02:00 |
|
cTn
|
37746bf3ed
|
fix rare condition in which flasher could hang and wont let the user leave
|
2014-08-30 08:27:24 +02:00 |
|
cTn
|
1e681bbdd2
|
polish variable definitions (only indentation changes)
|
2014-08-30 08:26:12 +02:00 |
|
cTn
|
cc8e53205d
|
fix style
|
2014-08-14 17:00:32 +02:00 |
|
cTn
|
fc0fff017e
|
more strict
|
2014-08-09 20:47:07 +02:00 |
|
cTn
|
13d17e1528
|
stm32/stm32usbdfu parameters rework, removing UI options dependency
|
2014-07-22 14:16:09 +02:00 |
|
cTn
|
93ab8dfba3
|
move flashing protocols to separate folder
|
2014-07-22 13:20:26 +02:00 |