1dbf77c777
Fix watermark on cli tab. Previous commit broke text selection and
...
scrolling via the scrollbar.
2015-03-03 23:43:55 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
436eced7b7
Fix watermark on CLI tab
2015-02-27 14:11:53 +13:00
ede3c367f2
Error message for saving to disallowed dir,fix flash save problem on osx
2015-02-27 09:14:47 +13:00
46a0054d78
Add SVG watermark image to log view and some tabs.
2015-02-24 02:06:00 +00:00
7bdd010eb0
Avoid using GPS commands for targets that do not have GPS support
...
compiled in.
2015-02-23 21:27:55 +00:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
4f38a2468d
Merge pull request #112 from rbirkby/flight-instruments
...
Flight instruments
2015-02-20 20:04:13 +00:00
60b44d61fa
Use correct heading value
2015-02-20 01:52:09 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
ed285992da
Detect support for flash chip and disable tab if not available
2015-02-16 18:05:24 +13:00
7fb9f43b00
Merge remote-tracking branch 'upstream/development' into blackbox-flash
2015-02-16 17:45:47 +13:00
3c2bb6225d
Remove old fallback model texture, fix fallback model .json
2015-02-16 17:13:43 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
34d72feb69
Move handling of servo channel forwarding into the MSP.
2015-02-10 01:12:26 +00:00
6901aa2dbc
Cleanup serial port count code.
2015-02-08 23:16:17 +00:00
cfe6949c84
Allow same rnage of values for board alignment as cli (-180 - 360)
2015-02-02 00:08:09 +00:00
c0a7ebc568
Adding numbers to the options in the PID tuning select.
2015-01-30 22:16:50 +01:00
a5d985bddc
Attempt to fix justification problem of PID Tuning select element.
2015-01-30 22:15:20 +01:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
303e83d9d6
Naming cleanup for 7f032eba045afefd6955aa79caaa1eb05f06afaf
2015-01-29 19:24:00 +01:00
b940624b75
Fix placement of wire number on led strip tab.
2015-01-29 19:23:24 +01:00
7de513edfc
Fixed selection and mode toggle behavior to include all modes within selection and to toggle all in selection rather than invert.
2015-01-29 19:20:16 +01:00
9d01ac417c
Update maximum battery voltage scale. Fixes #4 .
2015-01-29 19:08:35 +01:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
c96565ed46
Merge branch 'add-sonar-to-sensors' of https://github.com/rosek86/cleanflight-configurator into rosek86-add-sonar-to-sensors
2015-01-29 15:27:22 +01:00
975e863bd0
Enhance welcome tab by adding documentation and support panels with
...
links.
2015-01-29 05:21:02 +01:00
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
862e96f2aa
Fixing accidental use of = instead of ==.
2015-01-27 23:42:49 +01:00
361d9a57dd
Temporarily use 'fallback' model instead of 'custom'.
...
Revert this commit when a custom.json model file is available.
2015-01-27 21:14:44 +01:00
b3424eadcb
Defining the models and images used in one place to make maintainance of
...
the mixer list easier.
2015-01-27 21:06:39 +01:00
24d5f0de70
Tabs converted to spaces in .js
2015-01-26 22:41:14 +01:00
36989b8e5d
Fixed missing direction fragment lost during edit
2015-01-26 22:41:03 +01:00
60ee83b1b4
Servo Channel updated to support 16 channel receivers (Dynamic Grid based on receiver channels)
2015-01-26 22:40:03 +01:00
9583ae81fa
Only send 'exit' on cli tab during cleanup if connected.
2015-01-26 22:38:25 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
5de6b2c28d
Merge branch 'frog32-feature-negative-currentsensors' into development
2015-01-26 19:07:10 +01:00
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
37432d1bf1
Merge pull request #68 from GruffyPuffy/xbus_rj01
...
Added new XBUS_MODE_B_RJ01 (for Align DMSS RJ01 receiver)
2015-01-26 18:59:37 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
9193b77119
Added new XBUS_MODE_B_RJ01 (for Align DMSS RJ01 receiver) to Configuration tab. Also increased width of listbox to show full name.
2015-01-25 14:48:58 +01:00
c5fb803e29
Define colors for RX channels 13-16.
2015-01-25 02:00:09 +01:00
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
3ead46fba3
Change grid color to grey. Make grid outer border same width as inner
...
borders.
2015-01-23 10:29:59 +01:00
10173e1d6c
Led grid tweaks
2015-01-23 00:20:38 -08:00
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
d045deb28f
Updating LED strip color combinations.
2015-01-22 21:53:34 +01:00
bb13699b48
Adding a 'Clear ALL' button on the LED Strip tab. Updating 'Clear' so
...
that it also clears the wire order.
This makes it easier to change LED layouts without too much button
clicking.
2015-01-22 21:27:13 +01:00
822af2352e
Adding one more led function combination style.
2015-01-22 20:27:08 +01:00
cb9fe40c71
Cleanup wire number alignment and styles.
2015-01-22 10:59:28 +01:00
ef323cfaf2
Adding CSS styles for other LED function combinations.
2015-01-22 10:49:36 +01:00
7f0461e41e
Remove unused CSS styles.
2015-01-16 00:33:37 +00:00
f8964beec3
Update wire order message to reflect MSP behavior instead of CLI code
...
generation.
2015-01-16 00:33:13 +00:00
7a674c9ab2
Display a message when the LED strip configuration has been saved.
...
Remove the old CLI panel.
2015-01-16 00:29:16 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
db68d567d3
Merge branch 'led-strip' of
...
https://github.com/decompyler/cleanflight-configurator into
decompyler-led-strip
Conflicts:
tabs/led_strip.css
tabs/led_strip.js
2015-01-09 01:17:57 +00:00
6a8160c4f9
Fix line endings.
2015-01-09 01:11:46 +00:00
3892c02833
Fix calculate of remaing LEDs and selection of next wire number.
2015-01-09 00:58:01 +00:00
257855b457
CSS Tweaks
2015-01-08 16:28:05 -08:00
7d86fa9958
Update LED strip grid based on current configuration.
2015-01-09 00:24:10 +00:00
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
9bb764d1f2
Update firmware flasher to ignore non-matching release files.
2015-01-08 22:58:08 +00:00
3d1665e462
Deleting unused led-strip code.
2015-01-08 21:54:46 +00:00
3c4623c7cf
Tweak position of wire numbers.
2015-01-08 21:52:39 +00:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
a348b5de8e
Support RC and Stable firmware releases.
2015-01-08 11:44:32 +00:00
7a64a39f25
Group battery and current settings together. Move GPS configuration to
...
the bottom. Move failsafe thottle to failsafe section.
2015-01-08 01:07:38 +00:00
f5ba166c15
Add failsafe feature to RX section.
2015-01-08 01:06:42 +00:00
70593bc0a3
Update code to use correct selected for the RSSI AUX select element.
2015-01-07 20:15:21 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
38e9db1aca
Add BLACKBOX feature tickbox and Blackbox port scenarios
2015-01-07 12:40:21 +13:00
26d6c1a562
Allow baud rate configuration on the Configuration tab.
2015-01-04 10:28:32 +00:00
8257efffa8
Fix GPS MSP message code for GPS signal strength indicators.
2015-01-04 09:34:56 +00:00
bfa689be40
Overhaul of the configuration tab.
2015-01-04 08:09:10 +00:00
597c96819b
Remove strange baseflight reference from the model HTML and CSS.
2015-01-04 01:34:46 +00:00
9f07f438e2
Update firmware flasher so it formats the release notes a little.
2015-01-03 22:29:32 +00:00
b9fbb5447d
Delete unused baseflight code from firmware flasher.
2015-01-03 22:10:08 +00:00
a69921e5c4
Added XBUS_MODE_B to serial rx configuration.
2015-01-03 01:09:59 +00:00
fe64fb3628
Merge pull request #30 from Roeland54/development
...
Fixed the displayed firmware-date in the firmware flasher.
2015-01-03 01:05:47 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
68230b103e
Updating ports tab to use API version 1.1.
2015-01-02 19:31:51 +00:00
ebd5d27809
Sanitize the names of the handlers. Move code into named functions.
2015-01-02 19:31:51 +00:00
fe72557b12
Removing more review related code. Adding skeleton of new Ports tab.
2015-01-02 19:31:50 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
de3494146c
Fixed firmware version Displayed hours.
2014-12-25 23:30:15 +01:00
f71eba5760
Fixed the displayed firmware-date in the firmware flasher.
2014-12-25 22:10:00 +01:00
7a800444b5
Force the user to pick a fimrware before loading
2014-12-25 00:02:18 +01:00
e938060be4
Reorganize MSP calls on setup tab so that the calibrate mag button is
...
enabled on the CJMCU target which does not implement the GPS msp
commands.
2014-12-21 23:17:41 +00:00
48f8c8f411
Fix wraping of 'master' slider on motors tab.
2014-12-21 14:03:09 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
5112a73c74
Use larger calibrarion buttons and avoid text-wrapping on button labels.
2014-12-21 00:26:33 +00:00
968db92b81
Update CSS so that AUX 10-12 fit without wrapping.
2014-12-21 00:22:05 +00:00
8935054584
Fixed transposed URLs in firmware flasher
2014-12-20 11:16:35 +00:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
41a2ef3295
Re-instate use of MSP_CONFIG and updated MSP_MISC commands in
...
cleanflight.
2014-12-20 00:30:59 +00:00
e8bd813fb8
Re-implement model diagram on motors tab.
...
See 79505e42ed
2014-12-20 00:29:49 +00:00
ccc0b839e6
Minor tweaks to the firmwre flasher.
2014-12-19 19:48:19 +00:00
c6867d3c52
Update the firmware flasher to provide more details about the release.
...
Add warning message about target selection.
2014-12-19 16:04:42 +00:00
dac49093a0
Update firmware flasher so that it uses files available via the github
...
releases api.
2014-12-19 14:56:40 +00:00
2f9e2b13c5
fixed typos
2014-12-19 04:05:25 +01:00
a8a6b8904c
fixed async issues, added string formatter proto
2014-12-19 03:58:42 +01:00
6051876f23
commit of broken code for a js expert to fix.
2014-12-19 01:30:48 +00:00
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
9cf60224b2
Added Warning Cell Voltage
...
Added Warning Cell Voltage to Battery voltage in Configuration tab. When battery has deployed to level that is defined with warning cell voltage buzzer starts slow beeping and copter can still land safely. When min voltage is reached beeper start fast "screaming" and LIPO is empty (to point when it could be damaged from over discharging if using that default 3.3V).
2014-12-09 10:37:02 +02:00
c0284f1134
ditch some empty callbacks that are now gracefully handled inside the serial layer
2014-12-06 15:35:12 +01:00
c005b7604c
add vtail/atail quad models from norem
...
#58
2014-12-05 17:25:33 +01:00
21e414f4b3
fix method name mismatch in serial layer
2014-12-05 10:23:53 +01:00
843aa8634a
add MSP to supported serial RX array
2014-11-29 21:44:28 +01:00
2e88daa806
fix style
2014-11-29 10:16:53 +01:00
4df1e9aafc
Merge pull request #66 from jaahaavi/master
...
Updated GPS settings
2014-11-29 10:15:19 +01:00
277d39109a
sort out dates in js
2014-11-26 16:32:17 +01:00
7f2dab0e4a
moving to different time format
2014-11-26 12:34:32 +01:00
b2cb677869
Updated GPS settings
...
- Added SBAS disabled (-1) to configuration tab
- Fixed GPS signal strength bars
2014-11-23 11:41:24 +02:00
5e165b286b
implemented simple review mechanism
2014-11-21 08:40:43 +01:00
b7e6f66a3d
add adjusted svg graphics for V tail and A tail quad from norem
...
#58
2014-11-19 19:36:11 +01:00
df79edc0ad
fix gps distance to home not updating in GPS tab
2014-11-17 19:58:12 +01:00
dc633f2421
fix release/time sorting of fetched builds, optimize, needs more testing
2014-11-15 02:18:04 +01:00
366cd018b2
whops, fixing trailing commas
2014-11-15 01:18:04 +01:00
66ab7d1093
add A-tail Quad to supported multiTypes, no svg & using custom svg and default 3D model at the moment
...
#58
2014-11-14 12:11:22 +01:00
7a0d3a1199
handle all sorts of edge cases that would otherwise break UI or functionality
2014-11-11 11:59:12 +01:00
97e37347d6
implementing the highly wanted select box for hand picking firmware builds that are available on baseflight.net
2014-11-10 21:33:32 +01:00
135b4e6905
Set a default rnage when enabling an adjustment. Show the channel
...
marker.
2014-11-09 04:55:52 +00:00
56a3b7c52b
Some cleanup of the auxilary tab code.
2014-11-09 04:54:12 +00:00
902da2f91d
Add 'Adjustments' tab.
...
Cleanup 'Auxilary' tab code.
Rename other tabs to have shorter titles.
2014-11-09 00:46:12 +00:00
a31282c6a3
fix vbatmincellvoltage and vbatmaxcellvoltage scale factors inside output cruncher
2014-11-03 18:36:29 +01:00
3a4b41b259
assign correct error message for fetching online firmware
2014-11-03 16:57:08 +01:00
72447a6103
set release filter to accept NAZE only
2014-11-03 16:53:54 +01:00
5cff317208
Changed model extensions from `.js.` to `.json` fitting with export from
...
latest three.js exporter.
725819c98d
2014-11-02 19:04:32 +11:00
a7c3779b25
Added some new models
2014-10-31 23:42:26 +11:00
59df068b63
rename all underlying references inside the renamed files
2014-10-30 12:47:52 +01:00
0cd315b5e7
rename files to better correspond to their specific tabs
2014-10-30 12:43:35 +01:00
e401b1ffce
renaming some of the appview hits
2014-10-30 12:33:39 +01:00
561758b2a8
tweak obsolete class names and css
2014-10-25 14:04:38 +02:00
0af8d7d453
normalize css indentation in gps and firmware flasher (missed it the first time somehow)
2014-10-24 16:58:07 +02:00
ad005a3f1c
revamped option part of firmware flasher UI
2014-10-24 16:55:42 +02:00
ed7600facc
implement support for flashing development firmware (first iteration, done via checkbox)
2014-10-24 15:36:19 +02:00
569122392e
planned cache and interval speed optimizations
2014-10-19 15:29:55 +02:00
3c4307ae57
add initialization timeout for flash on connect, rework functionality so each new detected port can trigger flashing sequence
2014-10-19 09:38:39 +02:00
b6097d6271
move parse_hex function away from the global context
2014-10-19 04:18:05 +02:00
f64b558d5c
Update the default channel mode range to match the old MultiWii MID
...
checkbox.
2014-10-18 16:50:53 +01:00
a08ae2b7c6
Update donation links.
2014-10-14 16:32:45 +01:00
a517aeef36
Removing unused css selectors.
2014-10-13 19:05:45 +01:00
7400a2af2f
Internationalize mode range copy.
2014-10-13 18:59:26 +01:00
c9b7cf40f3
When a mode has no ranges assigned the info panel should not show
...
enabled/disabled state.
2014-10-13 18:57:43 +01:00
f93132b05e
Update color scheme of active/inactive modes.
2014-10-13 18:46:03 +01:00
428a00e651
Update AUX config UI to use new MSP commands for mode ranges.
2014-10-12 23:47:20 +01:00
4fe8d66bf5
after compatbility remove css and initialize3d routine cleanup
2014-10-12 18:54:11 +02:00
ecd34bf113
removing all code depending on CONFIG.capability that i could find on the first swoop
2014-10-12 18:38:04 +02:00
81a2872360
pulling main switch on compatibility (this should go live on November 1st 2014)
2014-10-12 18:35:32 +02:00
b35590f052
exprimental restore procedure
2014-10-12 18:00:44 +02:00
e4ecb7838c
Pick the first unused channel aux when adding a range to a mode.
2014-10-12 00:01:36 +01:00
2d6143b403
Update color scheme.
2014-10-11 23:38:03 +01:00
e892cbdbad
Work in progress aux configuration ranges.
2014-10-11 23:10:20 +01:00
63768b0af0
correct the value returned by getDate, display GMT offset
2014-10-11 16:45:19 +02:00
296a925494
correct old resource link, bugfix for chrome 38M which for unknown reason adjusts element scroll on select element value change
2014-10-08 00:30:54 +02:00
341416c180
attach window resize handlers in a way that doesn't overwrite previous handler
2014-10-06 19:16:48 +02:00
3d64b87578
add callbacks to backup and restore procedures, attach success messages in callbacks, hook up analytic events
2014-10-06 16:07:47 +02:00
cd4c7a8160
add SERVO_CONFIG to backup file, restoring old version will throw compatibility error
2014-10-06 15:24:34 +02:00
5105dc2165
clamp values to specific range
2014-10-05 19:46:27 +02:00
1c88db0fdd
prepare models array where we use multiType as index
2014-10-03 15:21:16 +02:00
3f0b501063
move motor_order to resources
2014-10-02 13:11:25 +02:00
840058d4c1
separate webgl capability detector in main.js, keep track
2014-10-02 11:21:56 +02:00
628ffade95
update manifest, readme, fallback brick code
2014-10-01 17:23:23 +02:00
f9ff34fb8b
prevent re-sending analytics appview on tab re-initialization, add 1500ms delay on configuration save & reboot
2014-10-01 13:16:22 +02:00
875a81e11d
Update URLs for firmware and changelog.
2014-10-01 12:11:45 +01:00
5cd042ae9d
remove active_tab_ref, name some of the anonymous functions, cleanup
2014-10-01 12:58:09 +02:00
01d67a8e85
support for fallback model
2014-09-30 20:25:48 +02:00
663c46a122
update changelog, enable overdraw for materials loaded through loader
2014-09-30 17:07:44 +02:00
4469dfb13c
finishing touches
...
#51
2014-09-30 16:41:17 +02:00
82c2c7fc96
Revert "finishing touches (cleanup & optimize)"
...
This reverts commit a82b968bee
2014-09-30 16:36:58 +02:00
a82b968bee
finishing touches (cleanup & optimize)
2014-09-30 16:36:49 +02:00
f60de956a4
display motor/servo values in us inside the bars as requested
...
#51
2014-09-30 16:33:47 +02:00
3732e5e598
remove hardcoded html bar elements, cleanup
...
#51
2014-09-30 16:02:57 +02:00
6968faaac9
more rcmap select box options and tooltip with visual clue
2014-09-30 15:33:28 +02:00
b82aad4589
no need to fix the model origin
2014-09-29 20:40:43 +02:00
f5e8562971
changes required to get a blender model in
2014-09-29 20:25:20 +02:00
fe4240deb7
rssi_aux_channel support in receiver tab, hybrid box bugfixes
2014-09-24 16:01:23 +02:00
c24b8fb482
MSP_BUILDINFO placeholder code
2014-09-24 15:19:22 +02:00
4181de8141
check WebGL contexts (both window and canvas), setup slower CanvasRenderer accordingly, fixes both OS and user HW acceleration settings
2014-09-24 13:45:38 +02:00
69e23197e1
change profile input element to select
2014-09-23 21:02:07 +02:00
b826d8a6cf
custom made meter indicators with sub-glyph rendering
2014-09-23 14:23:56 +02:00
2088a49b15
add macos to the canvas pile
2014-09-22 20:03:30 +02:00
e7534f8035
sprinkle in some new bright colors for sensor status, reworking meters in receiver tab
2014-09-22 18:58:56 +02:00
0cb69faf00
fixing the last bugger in curve/value update event
2014-09-22 11:06:29 +02:00
a8b96a9206
dont cancel following events
2014-09-22 11:03:00 +02:00
17e5893dde
variable cleanup, event bugfixes, one more update condition left
2014-09-22 10:50:34 +02:00
92581335a1
extending failsafe throttle input limits to 0-2000 as requested
2014-09-22 10:13:00 +02:00
47135e2bb8
add small padding around svg image in mixer to make things look little bit better
2014-09-20 14:15:53 +02:00
e15d8ab060
normalizing indentation in css files
2014-09-20 14:07:00 +02:00
4412f9c263
default and initial setup renamed to landing and setup, including object adjustments
2014-09-20 13:51:23 +02:00
ef2568e451
bugfixes for the most retarded map conversion i have ever seen (thank englishman for the fix)
2014-09-19 20:05:32 +02:00
036308fcdb
fix for constantly resetting focus
2014-09-19 18:45:57 +02:00
9d3f98ace2
add "CLI" feature names as checkbox tooltip
2014-09-19 17:51:55 +02:00
6be76d855d
implement channel map including validation and UI compatibility fallback
2014-09-19 17:44:04 +02:00
4a00abd162
fixed urls in compatibility area
2014-09-19 16:04:08 +02:00
639a1a3b1c
Added octo x8 and flying wing graphics. Switching character outlines to actual text.
2014-09-19 09:33:41 -04:00
b0ed6126f4
fix new and compatibility wrapper height
2014-09-18 18:35:08 +02:00
1d3b2e57fc
another attempt to cleanup the initial tab
2014-09-18 14:44:42 +02:00
90cd5aa69b
reworked mixer UI as requested
2014-09-18 14:29:54 +02:00
0c175725b1
support for currentscale and currentoffset, ui fully working both read and write
2014-09-18 13:21:48 +02:00
f2ac7369de
add gps info block to fill some of the whitespace
2014-09-18 12:54:59 +02:00
287a1df962
simplify some of the change events
2014-09-18 12:32:27 +02:00
800bfd59c8
support for multiwiicurrentoutput
2014-09-18 12:24:38 +02:00
6f9c5cb6f2
multiwiicurrentoutput checkbox, BF_CONFIG will be extended when firmware updates
2014-09-17 23:00:57 +02:00
4b40695ace
swap groups according to request
2014-09-17 20:19:22 +02:00
ba046031ed
add midthrottle (midRc) as requested, placeholder multiwiicurrentoutput variable
2014-09-17 20:13:13 +02:00
ee0dec96d8
gps related configuration
2014-09-17 17:46:21 +02:00
ce53bc99f2
add serial rx type configuration write/read working
2014-09-17 17:02:16 +02:00
a6adfe5c7d
pretty feature descriptions from englishman
2014-09-17 16:26:29 +02:00
370ad21f85
desc text for throttle and battery category
2014-09-17 16:19:20 +02:00
c537616a39
hooked up (mostly palceholder) text to various inputs
2014-09-17 16:08:40 +02:00
ab8d8e1a56
board alignment, accel trim, mag declination
2014-09-17 15:44:28 +02:00
a34357d92a
initializing input elements for throttle and battery, changed to 2 row design
2014-09-17 15:20:21 +02:00
c352199434
working mixer list with mixer preview
2014-09-17 14:22:16 +02:00
e8c46d1f25
removing various elements from initial tab
2014-09-17 14:21:42 +02:00
fdbfdfd31d
working feature selection (both read and write), missing description and nicer text
2014-09-17 13:01:46 +02:00
b11e4cde6a
fixing -webkit-inner-spin-button once again (what is chromium doing to that style...)
2014-09-17 11:37:27 +02:00
fee5219a73
move index to ascii conversion for rcmap out of msp protocol, define feature index array (will get a proper text polish in the future)
...
updating mixer select with missing names
2014-09-17 11:23:31 +02:00
4894f7493a
apply crunching mechanism to compatibility code in initial tab, disable magnetometer calib if magnetometer is missing
2014-09-17 10:51:54 +02:00
945b86f9b2
rename translation shortcuts, drop configuration files in
2014-09-17 10:31:36 +02:00
e9c4a533af
finishing touches to the crunching mechanism, backup and restore is all cleaned up now
2014-09-17 09:27:54 +02:00
e626fbeb7b
utilizing the new data cruncher in various tabs (aux, pid, receiver) and in restore routines, unfinished (looking solid)
2014-09-16 23:07:52 +02:00
52afdb2928
model type wont be displayed inside 3D area anymore
2014-09-16 21:28:18 +02:00
57b4e3cafa
wait for cleanup callback, then reboot
2014-09-16 21:18:14 +02:00
875f3bfa15
first CAP_BASEFLIGHT_CONFIG implementation (unfinished) for initial tab, including temporary backwards compatibility support
2014-09-16 19:27:30 +02:00
5b3da95e05
add fallback to canvasrenderer on cros and linux (temporary)
2014-09-14 20:38:39 +02:00
066c355170
Remove baseflight references from filenames.
2014-09-14 13:46:30 +01:00
619f9032be
css3D hack replaced by a flying brick done in three js
2014-09-14 01:27:50 +02:00
a96e804359
removing MSP pass through mode
2014-09-08 17:52:07 +02:00
125be0271f
static size for mix diagrams and adding missing custom definition in multitype switch
2014-09-06 11:02:54 +02:00
4623853b0a
initial work on scalable cube
2014-09-05 15:10:32 +02:00
9c6d803334
firmware received from the github server can now be saved locally (as requested)
2014-09-04 17:16:13 +02:00
3aa8d6aa71
minimize the primary padding/margin UI footprint to get some more space for log and content area
2014-09-04 09:33:00 +02:00
8528e3f066
pixel perfect block alignment for initial setup tab
2014-09-04 08:57:58 +02:00
6a360d973b
Update URLs to use cleanflight again.
2014-09-04 03:19:48 +01:00
79505e42ed
Show model diagram on motors tab.
...
When testing motors it's more useful to have it present on the motors
tab so you don't have to keep cross-referencing the initial setup tab.
2014-09-04 02:59:31 +01:00
0924a9e8a7
Ensure unitialised data is not used when configuring aux channels 5-8.
2014-09-04 02:16:33 +01:00
bf13a11dc2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
changelog.html
js/data_storage.js
js/protocols/stm32.js
manifest.json
tabs/auxiliary_configuration.js
tabs/default.css
tabs/default.html
tabs/firmware_flasher.js
tabs/servos.js
2014-09-04 01:40:24 +01:00
9034a94135
release
2014-08-31 16:52:55 +02:00
911ddba278
only request firmware info from github api when firmware is valid
2014-08-31 10:10:53 +02:00
b1390b0b01
updating changelog
2014-08-30 10:36:55 +02:00
37de8dfefa
new simplified flasher status UI
2014-08-30 10:30:28 +02:00
322af92d45
add / implement flash slowly option in firmware flasher
...
this will allow flashing via serial adapters that doesn't support 921600
flashing via various bluetooth adapters will be also possible now
(untested)
2014-08-30 08:59:21 +02:00
82c1c3baef
Disable sponsors.
2014-08-26 01:19:47 +01:00
6f4d04eb90
Fix aux channel configuration when using an rc system with 3 aux
...
channels.
2014-08-25 10:54:36 +01:00
8128869c83
slider bugfix, optimizations
2014-08-24 23:39:19 +01:00
81e4211cc3
text polish
2014-08-24 23:39:19 +01:00
9e5edbbf6b
reformat some stuff
2014-08-24 23:39:19 +01:00
c1c4f52df9
small ui polish / tweak for the plot control blocks
2014-08-24 23:38:43 +01:00
c2bd737362
motor and servo indicators will now have tooltip containing signal length in us
2014-08-24 23:38:43 +01:00
51ef74fadf
merge multiType name and multiType diagram switch into one
2014-08-24 23:38:43 +01:00
0eafb01b09
Added airplane and vtail graphics
...
Added airplane and vtail graphics. Also further reduced filesize of
existing graphics + better readability.
2014-08-24 23:38:43 +01:00
d4d82c39fd
make initial tab data request burst better comply with strict mode to prevent random race conditions
2014-08-24 23:38:43 +01:00
d4f4d619cf
another run on undefined comparators
2014-08-24 23:38:42 +01:00
644fb5afed
fix graph initialization on cold start
2014-08-24 23:38:42 +01:00
36c4fef051
pretty pretty pretty
2014-08-24 23:38:42 +01:00
118715ef85
polishing run
2014-08-24 23:38:10 +01:00
b77ed6b174
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-24 23:37:07 +01:00
f3ea5757f7
lots of work on removing global variables
2014-08-24 23:37:07 +01:00
cc8ca21cc0
enabling strict in last 2 tabs
2014-08-24 23:37:07 +01:00
7f20843ba8
enable strict mode in couple more files
2014-08-24 23:36:17 +01:00
01769559cc
moving backers to sponsors block
2014-08-24 23:35:45 +01:00
d8f834fa51
chain changes, cleanup and fix style
2014-08-24 23:32:05 +01:00
356c66b30e
Added Motor Mix Diagrams
2014-08-24 23:32:05 +01:00
6a58fee7c4
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-08-24 23:32:05 +01:00
ab02817095
slider bugfix, optimizations
2014-08-18 19:28:26 +02:00
5bfc81e317
text polish
2014-08-18 19:28:06 +02:00
8fdda97b01
reformat some stuff
2014-08-16 15:04:17 +02:00
194798ca2d
small ui polish / tweak for the plot control blocks
2014-08-16 00:23:49 +02:00
80e60d5638
motor and servo indicators will now have tooltip containing signal length in us
2014-08-16 00:16:28 +02:00
14bb0b5dca
merge multiType name and multiType diagram switch into one
2014-08-16 00:11:25 +02:00
6264fd4245
Merge pull request #46 from creyc/development
...
Added airplane and vtail graphics
2014-08-14 20:12:29 +02:00
41615891a0
Added airplane and vtail graphics
...
Added airplane and vtail graphics. Also further reduced filesize of
existing graphics + better readability.
2014-08-14 14:03:17 -04:00
d7810e1bb6
make initial tab data request burst better comply with strict mode to prevent random race conditions
2014-08-14 16:48:16 +02:00
dbf528345e
another run on undefined comparators
2014-08-14 16:41:49 +02:00
468d7f57c8
fix graph initialization on cold start
2014-08-14 16:40:55 +02:00
932a58d355
pretty pretty pretty
2014-08-12 16:20:26 +02:00
2753f354e0
polishing run
2014-08-12 16:05:22 +02:00
e27a194ec7
another refactor for global variables, bugfixes for logging tab initialization in strict mode
2014-08-12 15:51:31 +02:00
ec44b77ff2
lots of work on removing global variables
2014-08-10 06:01:44 +02:00
9043358348
enabling strict in last 2 tabs
2014-08-09 20:51:06 +02:00
20e6ad0074
enable strict mode in couple more files
2014-08-09 20:01:17 +02:00
026f01434a
moving backers to sponsors block
2014-08-06 15:11:11 +02:00
c1ab10c0c8
Fix auxiliary tab when using parallel PWM.
2014-07-31 00:18:04 +01:00
c30e883e16
chain changes, cleanup and fix style
2014-07-25 14:20:09 +02:00
a8286c53c5
Merge pull request #42 from CurtisFissel/master
...
Added motor mix diagrams
2014-07-25 14:12:23 +02:00
d379cdfcf2
Added Motor Mix Diagrams
2014-07-25 04:03:33 -04:00
13d17e1528
stm32/stm32usbdfu parameters rework, removing UI options dependency
2014-07-22 14:16:09 +02:00
1688b41eb2
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
changelog.html
main.js
2014-07-20 01:01:25 +01:00
1885fba5a0
analytics overhaul
2014-07-16 12:59:12 +02:00
fb7cbe0c8f
use sync approach for displaying loading screen (faster then async)
2014-07-12 12:03:13 +02:00
8a52551671
request and store MSP_BOXIDS (for reasons unknown at the moment)
2014-07-11 17:52:56 +02:00
32012a831a
switching to bars spinner
2014-07-10 23:46:23 +02:00
14c9aab1ec
fix svg offset
2014-07-10 23:28:58 +02:00
ce78dadcd1
going hardcore SVG
...
https://github.com/jxnblk/loading
2014-07-10 20:50:58 +02:00
9fc0fa67cb
add loading indicator between tab switches
2014-07-10 20:09:54 +02:00
c1ef5aeead
yaw offset can now be remembered while switching tabs
2014-07-10 19:23:16 +02:00
e49f4ea5ff
converting tab object initialization
2014-07-10 19:19:45 +02:00
a8e19a6956
cleanup cli history
2014-07-10 19:16:53 +02:00
799fc76c8e
hooking up all of the active_tab references
2014-07-10 18:51:02 +02:00
75e0accf75
hookup new cleanup system
2014-07-10 18:45:18 +02:00
31dcbbfa91
firmware flasher support in tabs
2014-07-10 18:41:11 +02:00
56a2bb6a60
logging in tabs
2014-07-10 18:36:10 +02:00
e37191a1b0
cli in tabs
2014-07-10 18:33:30 +02:00
0a6ce25565
sensors in tabs
2014-07-10 18:31:27 +02:00
979d419e75
motor outputs in tabs
2014-07-10 18:29:09 +02:00
36c49dded7
gps in tabs
2014-07-10 18:27:04 +02:00
2d88d2d46d
servos in tabs
2014-07-10 18:24:56 +02:00
b76ec2831b
aux config in tabs
2014-07-10 18:22:50 +02:00
13f49c0f64
receiver in tabs
2014-07-10 18:20:09 +02:00
00e1ae0500
pid tuning in tabs
2014-07-10 18:14:33 +02:00
f2e8f8911c
initial setup in tabs
2014-07-10 18:14:26 +02:00
5efb1685a4
moving default tab to new tabs object
2014-07-10 18:14:17 +02:00
aca493301a
simplify some interval cleaning code
2014-07-10 14:48:33 +02:00
c6700a8588
equip all tab initializers with callback parameter (currently without hooks)
2014-07-09 16:12:37 +02:00
795502a585
enforce stronger interval cleanup
2014-07-09 15:46:35 +02:00
58f933e92c
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
_locales/en/messages.json
tabs/auxiliary_configuration.html
tabs/auxiliary_configuration.js
tabs/receiver.css
2014-07-07 19:45:33 +01:00
9c6fdf81c8
Update servos tab to support cleanflight's cleaner implementation of
...
channel forwarding which doesn't re-use 'middle'
This essentially removes the legacy multiwii hack support.
2014-07-06 12:26:41 +01:00
71c0cb65b3
display true heading and heading offset inside 3D cube area
2014-07-06 11:24:18 +02:00
e8c4a03dd5
moving majority of save buttons to bottom right corner, graph margin plish
2014-07-04 20:55:46 +02:00
7d41ff54a4
cleanup, make the save button ready for future layout
2014-07-04 14:15:25 +02:00
b5c051d1c1
Merge pull request #39 from CurtisFissel/Inital_Setup_Info_CSS
...
Initial Setup tab CSS changes
2014-07-04 14:05:28 +02:00
5ed64642df
Moved Save button to be relative to bottom right of window
2014-07-03 22:34:05 -04:00
e7cb66b94b
Moved Info box under the Battery Box
2014-07-04 01:54:38 +01:00
e3fdff0fca
Minor CSS change to sensor XYZ numbers in Motor and Sensor Tabs
2014-07-04 01:42:48 +01:00
6e0177738c
removing obsolete highlight
2014-06-30 02:44:55 +02:00
05dfaf910d
sprinkle in some tracking events for firmware flashing
2014-06-28 21:38:06 +02:00
844b211ea6
add automatic and manual offset for accel data
...
fixes #35
2014-06-28 13:47:52 +02:00
60fe31aaf9
add fine 0.05 scale
2014-06-28 13:37:10 +02:00
b633356bab
fix clipped numbers on y axis
2014-06-28 13:35:30 +02:00
13b81934b1
track external url clicks on welcome page
2014-06-27 19:19:06 +02:00
5bbb07a9e9
update master slider on reinitialize of motor tab
...
while motors are active and have the same value set
2014-06-27 18:49:41 +02:00
2e1327f2cd
adding more sensitive scale factors as requested #34
2014-06-27 14:43:46 +02:00
e8093b5797
polishing some of the UI outstanding quirks
2014-06-26 15:12:38 +02:00
e5648f5eae
add hover to reset link
2014-06-25 13:36:17 +02:00
797de63051
hook up reset max button
2014-06-25 13:30:17 +02:00
b43f73d303
initial implementation of accel_max_read, missing reset
2014-06-25 13:25:46 +02:00
6e52d3700d
save accel settings separately in motors tab
2014-06-25 13:06:55 +02:00
d128bd76a5
initial implementation of accel graph in motors tab
2014-06-25 13:01:21 +02:00
e19705e4f4
fix first uninitialized sample
2014-06-25 09:28:44 +02:00
1e459d1af8
loggin polish, sample counter bugfix
2014-06-25 09:18:01 +02:00
7ac0afe94e
correct margin for rx plot
2014-06-24 15:25:32 +02:00
8422e5d10c
define dynamic width for rx_plot
2014-06-24 15:04:50 +02:00
f2aa899fe0
polishing firmware flasher UI and messages
2014-06-24 14:57:41 +02:00
86aa6a282c
dangerous things that people want...
2014-06-23 19:50:39 +02:00
8d18b6f10e
correct profile select border colors
2014-06-23 15:31:38 +02:00
1f476eb907
kinematics Z fix
2014-06-23 10:07:43 +02:00
61bed4770f
cosmetic change
2014-06-20 14:29:16 +02:00
8273081fdd
moving kinematics data to array
2014-06-20 12:39:42 +02:00
8dfec796ee
add error message for not being connected
2014-06-20 11:59:53 +02:00
19de1e8040
add MSP_ANALOG support to logger
2014-06-20 11:55:14 +02:00
211bd5b89e
add valid way to exit logging in pass through mode
2014-06-20 11:20:29 +02:00
cb5bcf9c0a
initial work on pass through mode for ReadError
2014-06-20 11:07:43 +02:00
f649418fdf
moving CLI vars around
2014-06-20 10:29:01 +02:00
0a2947b1ab
sort out usb api errors in canary
2014-06-16 22:00:08 +02:00
2a18801315
add note
2014-06-09 18:42:07 +02:00
700ca41957
fix the steps for LEVEL I
2014-06-09 02:56:38 +02:00
b5a1015610
DFU detection and port UI DFU option injection
2014-06-08 20:10:07 +02:00
a0582fd79f
adding request usb permissions UI (DEV only)
2014-06-08 19:32:24 +02:00
b09620b6ae
remove obsolete needle, cleanup
2014-06-07 17:54:51 +02:00
75bac26c67
fully dynamic aux channel UI
2014-06-05 16:08:20 +02:00
7e62e98bac
Support AUX1-8 on the 'Auxiliary Configuration' tab.
2014-06-04 19:33:24 +01:00
32c2e76784
Update links and messages.
2014-06-01 20:43:03 +01:00
685d6e08cb
Merge remote-tracking branch 'multiwii/master'
2014-06-01 19:39:34 +01:00
5abe7473f8
moving send_message routine to MSP object
2014-06-01 14:10:18 +02:00
46cf844e7e
display current draw in A not mA
2014-05-30 01:41:27 +02:00
d68bd29191
initial support for current sensor code from Lux
2014-05-29 20:16:32 +02:00
6d38e301ef
bugfix for glitchy vertical text position in CLI
2014-05-26 14:11:30 +02:00
5042d2af2e
adding MSP_RAW_GPS support to logger
2014-05-23 17:37:57 +02:00
f3192b6d85
print csv value head as requested by Lux
2014-05-22 22:40:46 +02:00
7e7e2925f3
retain log file access between sessions
2014-05-22 19:16:40 +02:00
a2cd390d79
more graceful error handling
2014-05-22 17:00:35 +02:00
18a1626c17
i18n run
2014-05-22 16:42:34 +02:00
18c71f69c5
adding selectable poll rate, i18n run in todo
2014-05-22 16:29:38 +02:00
0c95e94cd5
semi working logging, missing poll rate
2014-05-22 16:06:49 +02:00
c40c783ddc
initial set of properties
2014-05-22 12:51:06 +02:00
fa90030759
loggin tab, initial work on IO
2014-05-22 12:13:16 +02:00
2421200b1f
Point the firmware flasher at the Cleanflight NAZE binaries and commit
...
messages.
2014-05-21 20:11:05 +01:00
3ce1296374
fix gps division
2014-05-20 21:01:44 +02:00
45ae10513c
accept flexible amount of aux channels (up to 28)
2014-05-20 14:06:15 +02:00
c46ab5b98c
Merge remote-tracking branch 'multiwii/development'
...
Conflicts:
tabs/receiver.css
tabs/receiver.html
tabs/receiver.js
2014-05-20 00:29:03 +01:00
4ba7cc5a46
generate meters/lines UI dynamically
2014-05-19 23:36:04 +02:00
953d6f5ef2
saving some cycles in plots
2014-05-16 21:02:59 +02:00
2c91452eee
reorganize
2014-05-16 10:13:30 +02:00
938653c9fa
Merge remote-tracking branch 'multiwii/development'
...
Conflicts:
js/data_storage.js
js/msp.js
tabs/receiver.js
2014-05-16 00:30:20 +01:00
5f07390d45
stuff rcData to array (allocating up to 32 chan)
2014-05-15 13:12:13 +02:00
49ec225d66
Add support for 12 channels to the receiver tab.
...
If the incoming data from the FC has 8 channels then only 8 are
displayed. The message size can be used to calculate the amount of
channels, as per MultiWii protocol 2.3 and Cleanflight.
2014-05-15 00:12:25 +01:00
05f06075b2
disable checkboxes and plots according to sensors
2014-05-08 15:58:52 +02:00
21a0242d38
defunk some of the option saving code
2014-05-08 14:56:25 +02:00
ccee927c77
move buttons to the bottom of firmware flasher
2014-05-08 14:56:03 +02:00
96ce646aa1
firmware flasher i18n support
2014-05-08 12:01:07 +02:00
1448baf4d6
scalable UI for firmware flasher
2014-05-08 11:27:06 +02:00
6f823608ff
cleanup
2014-05-08 11:16:07 +02:00
9fbec01a81
cli i18n support
2014-05-08 11:15:35 +02:00
ef2e8086d5
sensors i18n support
2014-05-08 11:09:23 +02:00
36a47f5abd
motors i18n support
2014-05-08 11:02:58 +02:00
c6efcf1850
gps i18n support
2014-05-08 10:56:41 +02:00
aaacf6cea8
support global and local chip erase
2014-05-07 08:07:49 +02:00
8aafb37864
cleanup
2014-05-07 04:08:52 +02:00
f86a50b20b
request MSP_IDENT on initial tab enter
2014-05-07 03:01:59 +02:00
67a25c96d3
servos i18n support
2014-05-06 23:57:57 +02:00
efb481227c
aux i18n support
2014-05-06 23:39:37 +02:00
a7c0e56254
receiver i18n support
2014-05-06 23:33:47 +02:00
eb973cff16
initial setup i18n support
2014-05-06 18:07:32 +02:00
eac97e1b59
pid tuning got full i18n support
2014-05-06 17:34:59 +02:00
2162a2b9d3
pre-enable i18n for all html content in tabs
2014-05-06 16:48:46 +02:00
6a33801463
default tab moved to i18n
2014-05-06 16:45:26 +02:00
c3aa3a3fab
lat/lon values in gps tab are now gmap links
2014-05-06 02:08:55 +02:00
fbbd677981
scale motor tab
2014-05-05 16:44:02 +02:00
7aa25dc732
fix 2 pixels of extra margin, fix UI blinking
2014-05-05 16:43:50 +02:00
e3d05650cd
pid tab will also scale now
2014-05-05 15:14:27 +02:00
5118da56d5
fix UI resize for mag/info, cleanup
2014-05-05 14:58:55 +02:00
462f907248
receiver tab will now scale nicely
2014-05-05 12:44:29 +02:00
0add615649
scale aux names nicely
2014-05-05 12:23:18 +02:00
e1698b481c
scalable cli
2014-05-05 12:20:39 +02:00
ce9110e45d
scalable graphs
2014-05-05 12:11:52 +02:00
801592da97
fix indentation
2014-05-05 11:48:24 +02:00
244b6d923f
small optimization for RX plot scaling
2014-05-05 11:34:20 +02:00
9914f745a1
landing page scalable
2014-05-05 11:34:06 +02:00
990d0595be
small rework / bugfixes for aux UI
2014-05-04 14:51:08 +02:00
46f72b344e
correct assignments
2014-05-04 13:27:12 +02:00
96cdd1d6c3
bump the width little bit more
2014-05-04 13:18:08 +02:00
4f8f45f290
add pid names to PID table from PID_names array
2014-05-03 22:54:33 +02:00
7e82e96114
add support for MSP_PIDNAMES
2014-05-03 22:42:11 +02:00
63aa7c8092
bugfix for high dpi glitch on welcome screen
2014-05-03 19:51:16 +02:00
b6e0cdfcc4
release
2014-05-03 01:07:33 +02:00
854a17e0f2
preparing some stuff for dongs
2014-05-03 01:03:24 +02:00
745e671615
display 3D fix status, widen the columns by 10px
2014-04-30 16:12:25 +02:00
7652b469cc
polishing landing page
2014-04-29 18:56:36 +02:00
98e950807e
bugfix/release
2014-04-29 01:48:18 +02:00
8691a77c2a
get raw hex from the new github url
2014-04-26 00:08:18 +02:00
6049cf0ec4
dedicated options icon/button (live access)
2014-04-22 16:16:22 +02:00
8c4a4277f8
implementation of options tab, polished statusbar
2014-04-22 00:30:22 +02:00
3a5741d9ed
reorganizing update helpers
2014-04-21 12:14:03 +02:00
3421916c21
bugfixes for last merge
2014-04-21 11:59:02 +02:00
c1fc82e0e4
Add helpers to resize the receiver/sensor plots
2014-04-20 23:12:18 +02:00
1280c7668c
optimizing/cleaning up
2014-04-19 22:23:44 +02:00
e9b1df35a1
using forward chaining (like rest of the project)
2014-04-18 01:07:10 +02:00
10c8fc6bf3
adding labels, adding 500 deg scale for gyro
2014-04-17 01:05:25 +02:00
8ba30a91d9
plot enable/disable toggles
2014-04-14 00:15:56 +02:00
c85f5af9cb
optimize
2014-04-13 22:43:24 +02:00
a0cf5463bc
narrow the line selector
2014-04-13 19:15:49 +02:00
32b3c532c9
remove bogus code
2014-04-13 18:37:10 +02:00
36cb1082ee
also hide AA in receiver tab
2014-04-13 18:05:30 +02:00
f91c73a38b
clamp width scale, reorder elements to hide AA
2014-04-13 18:04:08 +02:00
Dominic Clifton
Nicholas Sherlock
Richard Birkby
decompyler
Krzysztof Rosinski
enly1
Stefan Grufman
Marc Egli
Roeland Lutters
Paul Rogalinski
Thomas Greer
Paul Rogalinski
jaahaavi
cTn
jeff
creyc
CurtisFissel
Curtis Fissel
Tobias Raeder