a4b3904d3f
Merge branch 'rate-charts' of https://github.com/destos/cleanflight-configurator into destos-rate-charts
2015-10-14 20:37:51 +01:00
d70067c9b2
Merge branch 'development' of https://github.com/MauroMombelli/cleanflight-configurator into development
...
Conflicts:
tabs/servos.js
2015-10-14 20:33:42 +01:00
959eef251a
Merge pull request #241 from sherlockflight/sensor-tab-init
...
Sensor tab: Fix freeze on tab open on Chome 46
2015-10-14 20:31:22 +01:00
eb2aa5b4e5
Allow configuration of servo angle at min/max from GUI.
...
Closes #193
2015-10-14 20:27:47 +01:00
a7f90297da
BUmp control sticks jQuery library version.
2015-10-14 20:13:55 +01:00
d1396d8918
Merge pull request #224 from sherlockflight/msp-rx
...
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-10-14 20:09:10 +01:00
f4c12c40e7
Merge pull request #249 from AustinSaintAubin/development
...
Added Roll & Pitch to Setup Tab
2015-10-14 20:05:30 +01:00
5f8f773a64
Reorder some 3d initialisation code.
2015-10-02 22:43:20 +01:00
67110fa6cf
fix some comment typos
2015-10-02 21:36:55 +01:00
cf3d8ae798
Formatting changes to add Roll, Pitch, and Heading to Setup Tab
2015-09-29 23:40:12 -05:00
f62cf8defb
Code edit to add Roll, Pitch & Heading
2015-09-29 23:38:23 -05:00
53f99760c7
Formatting changes to add Roll, Pitch & Heading
2015-09-29 23:37:53 -05:00
e3e28a3c37
Make joystick window always-on-top to avoid Chrome scheduling penalty
...
Chrome severely reduces the interval of setInterval() calls when a
window is completely hidden (e.g. behind the main Configurator window).
This causes rx loss / failsafe detection to trigger when using the
RX_MSP joysticks
2015-09-25 00:59:54 +12:00
b7921de528
Have the command sticks disappear when disconnecting or switch to CLI
2015-09-25 00:12:06 +12:00
ac000a7768
make rate charts taller so curve is easier to see
2015-09-19 14:53:54 -05:00
e4f47f8153
- Target-unspecific VCP bugfix
2015-09-14 20:21:09 +08:00
e4d87c3ae2
Fix initialisation of sonar and altitude sensor fields on sensor tab
2015-09-01 03:35:57 +12:00
ef0c637877
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-08-30 02:23:40 +12:00
14c4fe1739
- take off reconnect for PR
2015-08-19 16:40:14 +08:00
d22f3faf1d
* Add Colibri Race Support
2015-08-06 12:19:15 +08:00
fb46711659
Cleanup looptime configuration.
2015-07-13 19:07:39 +01:00
be93f37416
Merge branch 'looptime' of https://github.com/tricopterY/cleanflight-configurator into tricopterY-looptime
2015-07-13 18:18:18 +01:00
64d7808e28
Merge pull request #201 from kchristensen/ff-typo-fix
...
Fix minor typo in firmware flasher
2015-07-13 18:15:50 +01:00
3e7da266ab
Merge pull request #214 from sherlockflight/dataflash-refresh
...
Update used flash size before dataflash save begins so that new data is not missed
2015-07-13 18:12:18 +01:00
12048ac7c1
Update links and sponsors.
2015-07-13 02:31:14 +01:00
687c0f1a84
Remove legacy servo configuration which originated from the overloaded
...
use of the servo 'rate'. All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00
1cb64130cc
update servo tab on configurator
...
1) work around 1.9.0 MSP buffer size bug.
2) support updated API for 1.12 (CF >= 1.10.0)
2015-07-13 00:02:58 +01:00
c0138f5f82
Sprinkle some help for common causes of error to reduce burned on
...
developers and community.
2015-07-12 21:35:25 +01:00
d8c41fb3c7
Show channel forwarding feature if available.
2015-07-12 20:44:43 +01:00
4203413b74
Escape < and > characters from the cli.
2015-06-29 03:33:17 +01:00
58bcbe876c
Allow gimbal servos to be configured when enabled.
2015-06-29 03:32:42 +01:00
4e41f46523
First cut of support for custom airplane and tricopter on servos tab.
2015-06-28 23:19:03 +01:00
dae3c3b2cf
Update used flash size before save begins so that new data is not missed
2015-06-22 22:39:32 +12:00
bc6d8513ea
Fix typo in firmware flasher
2015-05-26 18:22:48 -04:00
17d525352f
Allow FC loop time change via Configuration Tab
2015-05-26 16:28:58 +10:00
774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
b1f06ac802
Merge pull request #194 from sherlockflight/whitespace
...
Preserve consecutive whitespace characters in CLI output
2015-05-25 23:19:14 +01:00
e10d8997c4
Fix duplicate option with value '0` for firmware selection. Fixes #195
2015-05-25 23:17:59 +01:00
41cd7f3f18
Update motors tab to handle armed state. Re-order HTML elements on
...
motors tab.
2015-05-25 23:07:08 +01:00
487adf3275
Cleanup welcome tab layout.
2015-05-23 14:57:27 +01:00
9efa585c04
Move firmware flasher progress bar to the bottom next to the buttons.
2015-05-22 20:51:16 +01:00
ab883c6dc5
Cleanup code indention and positioning the rc_yaw_expo field
2015-05-22 21:37:03 +02:00
502a70233a
update
2015-05-22 21:37:02 +02:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
bc6453dc5a
Preserve consecutive whitespace characters on CLI output
2015-05-21 20:56:01 +12:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
6b93e354c8
Show Pitch P/I/D and Roll P/I/D in-flight adjustments when using
...
firmware 1.9.0. Fix missing 'Roll D' inflight adjustment.
Latest Cleanflight release candidate 1.9.0 now has support for them.
Previously it was unknown if the code was going to be in the 1.9.0 or
1.9.1 release.
2015-05-20 00:58:03 +01:00
5f05e4c8cc
Support inflight pitch/roll rate adjustments for fc version >= 1.8.0 and
...
pitch p,i,d and roll p,i,d adjustments for fc version => 1.9.1
2015-05-18 00:09:29 +01:00
14caed2a2f
- sorting firmware selection by version and name
2015-05-17 23:01:27 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
244685c9a6
Update version checking code to use semantic versioning - see
...
http://semver.org/
semver.js creating using browserify.
https://www.brcdn.org/?module=semver&version=4.3.4
2015-05-07 22:10:26 +01:00
fa3ce5716b
Increase range because some analog servo
...
As the issue #170 , but in the correct branch
2015-04-28 10:13:58 +02:00
7372cae6ad
Update sponsors panel.
2015-04-11 13:48:04 +01:00
62f0de7d3d
Make models larger in the 3D view.
2015-04-11 13:48:04 +01:00
99e11b65ce
Updated sponsors list. Add link to t-shirts.
2015-04-09 11:31:21 +01:00
c33cf6af2b
Bug fix configurator.js
2015-03-30 23:18:34 +01:00
9738fef79e
Use 0 based index for debug graph labels.
2015-03-30 21:32:06 +01:00
3e29944afa
Fix incorrect wire order state that occured when leaving led tab in wire
...
order mode and switching to a different tab and back again.
2015-03-30 03:18:32 +01:00
91161ebf94
Fix feature masks that were broken by
...
69c18377cf
2015-03-29 19:05:59 +01:00
3d822e836e
Tweak LED strip state button.
2015-03-29 15:57:09 +01:00
7d52de5945
Merge branch 'LED_Colors' of git://github.com/joefarmer/cleanflight-configurator into joefarmer-LED_Colors
2015-03-29 15:33:50 +01:00
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
99494d0157
Merge branch 'development' of git://github.com/tricopterY/cleanflight-configurator into tricopterY-development
...
Conflicts:
tabs/pid_tuning.html
2015-03-29 12:01:42 +01:00
ec9ff8c5ed
Merge pull request #144 from sherlockflight/roll-pitch-limit
...
Update roll/pitch/yaw rate limits to match CF's limits
2015-03-29 11:46:12 +01:00
a64b166e69
API check when saving, configuration.js
2015-03-29 11:24:32 +11:00
91605b16f7
Reworked configuration.jsp MSP_ARMING_CONFIG, MSP_SET_ARMING_CONFIG
2015-03-29 08:42:30 +11:00
fbf983dda8
Limit TPA to 1.0, restore old yaw limit of 2.55
2015-03-26 01:55:50 +13:00
d6c60fe586
Update roll/pitch/yaw rate limits to match CF's limits
2015-03-22 12:04:42 +13:00
83d65fc477
Limit Roll/Pitch, Yaw to 1.0 max
...
cleanflight/cleanflight/#658
2015-03-22 09:23:40 +11:00
87cf0d27b1
Reworked configuration.jsp MSP_ARM_CONFIG
2015-03-18 14:17:20 +11:00
cb3b2f54fb
Updated without .not() and black text friendly
2015-03-15 18:03:30 -04:00
5c5fb26aad
Use real colors for the color buttons on the LED strip configuration tab
2015-03-15 02:09:08 -04:00
911c09076b
Hiding div.disarm element when, not applicable.
...
CONFIG.apiVersion dependent
2015-03-15 16:08:59 +11:00
69c18377cf
Update configuration.js
2015-03-14 13:21:41 +11:00
8b2627c470
Added disarm class
2015-03-14 11:04:39 +11:00
590f326e69
Added auto_disarm_delay and disarm_kill_switch
2015-03-14 11:02:05 +11:00
29448db17c
Added auto_disarm_delay and disarm_kill_switch
2015-03-14 10:54:50 +11:00
58d0381097
Merge pull request #10 from cleanflight/development
...
Development
2015-03-14 10:40:51 +11:00
2863077ee3
Merge remote-tracking branch 'upstream/development' into development
2015-03-14 10:19:24 +13:00
90a9a7e6ae
Fix incorrect dataflash ui when using old firmware.
2015-03-12 00:32:45 +00:00
13f3ef2d94
Removed unnecessary style
...
Removed green border around TPA Breakpoint row header, as instructed by @hydra
2015-03-12 10:49:44 +11:00
8160e8e353
Merge branch 'development' of https://github.com/tricopterY/cleanflight-configurator into development
...
Conflicts:
js/msp.js
tabs/pid_tuning.html
tabs/pid_tuning.js
2015-03-12 00:40:15 +01:00
b2be2853b4
Provide a migration path from pre-1.8.0 firmware backups.
2015-03-11 23:34:24 +00:00
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
dd7efa9e54
Remove style that should not have been added in PR #128
2015-03-11 21:54:15 +00:00
5683314f93
Merge https://github.com/tricopterY/cleanflight-configurator into tricopterY-development
...
Conflicts:
tabs/pid_tuning.html
tabs/pid_tuning.js
2015-03-11 22:09:35 +01:00
db3b50814b
fixed formatting
2015-03-11 21:34:02 +01:00
e0b97b3b50
fixed inconsistent method names
2015-03-11 21:24:46 +01:00
a2920a0f49
Update pid_tuning.css
2015-03-11 16:13:57 +11:00
3a82ee2d24
Update pid_tuning.js
2015-03-11 16:11:25 +11:00
868b384208
Update pid_tuning.html
2015-03-11 16:07:11 +11:00
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
ca718409df
made pid or pidController change exclusive, always refresh from FC after
...
save
2015-03-11 00:19:24 +01:00
379f49184b
Merge pull request #2 from tricopterY/tricopterY-patch-1-1
...
Update pid_tuning.js
2015-03-10 16:10:38 +11:00
cd8a28544b
Merge pull request #7 from tricopterY/tricopterY-patch-1-6
...
Update pid_tuning.html
2015-03-10 16:08:28 +11:00
08736bcfce
Update pid_tuning.html
2015-03-10 15:11:09 +11:00
56832974a2
Update pid_tuning.css
2015-03-10 14:32:19 +11:00
7318e247be
Update pid_tuning.js
2015-03-10 14:27:34 +11:00
b331315b76
Add 250000 baudrate for blackbox
2015-03-07 13:07:32 +13:00
aa8d5300e5
Support new Blackbox baudrates including new 230400 rate
2015-03-06 19:58:57 +13:00
67c8cdcaac
Internationalise the Telemetry port dropdown option for 'Disabled'.
2015-03-05 15:57:23 +00:00
1dbf77c777
Fix watermark on cli tab. Previous commit broke text selection and
...
scrolling via the scrollbar.
2015-03-03 23:43:55 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
436eced7b7
Fix watermark on CLI tab
2015-02-27 14:11:53 +13:00
ede3c367f2
Error message for saving to disallowed dir,fix flash save problem on osx
2015-02-27 09:14:47 +13:00
46a0054d78
Add SVG watermark image to log view and some tabs.
2015-02-24 02:06:00 +00:00
7bdd010eb0
Avoid using GPS commands for targets that do not have GPS support
...
compiled in.
2015-02-23 21:27:55 +00:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
4f38a2468d
Merge pull request #112 from rbirkby/flight-instruments
...
Flight instruments
2015-02-20 20:04:13 +00:00
60b44d61fa
Use correct heading value
2015-02-20 01:52:09 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
ed285992da
Detect support for flash chip and disable tab if not available
2015-02-16 18:05:24 +13:00
7fb9f43b00
Merge remote-tracking branch 'upstream/development' into blackbox-flash
2015-02-16 17:45:47 +13:00
3c2bb6225d
Remove old fallback model texture, fix fallback model .json
2015-02-16 17:13:43 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
34d72feb69
Move handling of servo channel forwarding into the MSP.
2015-02-10 01:12:26 +00:00
6901aa2dbc
Cleanup serial port count code.
2015-02-08 23:16:17 +00:00
cfe6949c84
Allow same rnage of values for board alignment as cli (-180 - 360)
2015-02-02 00:08:09 +00:00
c0a7ebc568
Adding numbers to the options in the PID tuning select.
2015-01-30 22:16:50 +01:00
a5d985bddc
Attempt to fix justification problem of PID Tuning select element.
2015-01-30 22:15:20 +01:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
303e83d9d6
Naming cleanup for 7f032eba045afefd6955aa79caaa1eb05f06afaf
2015-01-29 19:24:00 +01:00
b940624b75
Fix placement of wire number on led strip tab.
2015-01-29 19:23:24 +01:00
7de513edfc
Fixed selection and mode toggle behavior to include all modes within selection and to toggle all in selection rather than invert.
2015-01-29 19:20:16 +01:00
9d01ac417c
Update maximum battery voltage scale. Fixes #4 .
2015-01-29 19:08:35 +01:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
c96565ed46
Merge branch 'add-sonar-to-sensors' of https://github.com/rosek86/cleanflight-configurator into rosek86-add-sonar-to-sensors
2015-01-29 15:27:22 +01:00
975e863bd0
Enhance welcome tab by adding documentation and support panels with
...
links.
2015-01-29 05:21:02 +01:00
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
862e96f2aa
Fixing accidental use of = instead of ==.
2015-01-27 23:42:49 +01:00
361d9a57dd
Temporarily use 'fallback' model instead of 'custom'.
...
Revert this commit when a custom.json model file is available.
2015-01-27 21:14:44 +01:00
b3424eadcb
Defining the models and images used in one place to make maintainance of
...
the mixer list easier.
2015-01-27 21:06:39 +01:00
24d5f0de70
Tabs converted to spaces in .js
2015-01-26 22:41:14 +01:00
36989b8e5d
Fixed missing direction fragment lost during edit
2015-01-26 22:41:03 +01:00
60ee83b1b4
Servo Channel updated to support 16 channel receivers (Dynamic Grid based on receiver channels)
2015-01-26 22:40:03 +01:00
9583ae81fa
Only send 'exit' on cli tab during cleanup if connected.
2015-01-26 22:38:25 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
5de6b2c28d
Merge branch 'frog32-feature-negative-currentsensors' into development
2015-01-26 19:07:10 +01:00
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
37432d1bf1
Merge pull request #68 from GruffyPuffy/xbus_rj01
...
Added new XBUS_MODE_B_RJ01 (for Align DMSS RJ01 receiver)
2015-01-26 18:59:37 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
9193b77119
Added new XBUS_MODE_B_RJ01 (for Align DMSS RJ01 receiver) to Configuration tab. Also increased width of listbox to show full name.
2015-01-25 14:48:58 +01:00
c5fb803e29
Define colors for RX channels 13-16.
2015-01-25 02:00:09 +01:00
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
3ead46fba3
Change grid color to grey. Make grid outer border same width as inner
...
borders.
2015-01-23 10:29:59 +01:00
10173e1d6c
Led grid tweaks
2015-01-23 00:20:38 -08:00
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
d045deb28f
Updating LED strip color combinations.
2015-01-22 21:53:34 +01:00
bb13699b48
Adding a 'Clear ALL' button on the LED Strip tab. Updating 'Clear' so
...
that it also clears the wire order.
This makes it easier to change LED layouts without too much button
clicking.
2015-01-22 21:27:13 +01:00
822af2352e
Adding one more led function combination style.
2015-01-22 20:27:08 +01:00
cb9fe40c71
Cleanup wire number alignment and styles.
2015-01-22 10:59:28 +01:00
ef323cfaf2
Adding CSS styles for other LED function combinations.
2015-01-22 10:49:36 +01:00
7f0461e41e
Remove unused CSS styles.
2015-01-16 00:33:37 +00:00
f8964beec3
Update wire order message to reflect MSP behavior instead of CLI code
...
generation.
2015-01-16 00:33:13 +00:00
7a674c9ab2
Display a message when the LED strip configuration has been saved.
...
Remove the old CLI panel.
2015-01-16 00:29:16 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
db68d567d3
Merge branch 'led-strip' of
...
https://github.com/decompyler/cleanflight-configurator into
decompyler-led-strip
Conflicts:
tabs/led_strip.css
tabs/led_strip.js
2015-01-09 01:17:57 +00:00
6a8160c4f9
Fix line endings.
2015-01-09 01:11:46 +00:00
3892c02833
Fix calculate of remaing LEDs and selection of next wire number.
2015-01-09 00:58:01 +00:00
257855b457
CSS Tweaks
2015-01-08 16:28:05 -08:00
7d86fa9958
Update LED strip grid based on current configuration.
2015-01-09 00:24:10 +00:00
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
9bb764d1f2
Update firmware flasher to ignore non-matching release files.
2015-01-08 22:58:08 +00:00
3d1665e462
Deleting unused led-strip code.
2015-01-08 21:54:46 +00:00
3c4623c7cf
Tweak position of wire numbers.
2015-01-08 21:52:39 +00:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
a348b5de8e
Support RC and Stable firmware releases.
2015-01-08 11:44:32 +00:00
7a64a39f25
Group battery and current settings together. Move GPS configuration to
...
the bottom. Move failsafe thottle to failsafe section.
2015-01-08 01:07:38 +00:00
f5ba166c15
Add failsafe feature to RX section.
2015-01-08 01:06:42 +00:00
70593bc0a3
Update code to use correct selected for the RSSI AUX select element.
2015-01-07 20:15:21 +00:00
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
38e9db1aca
Add BLACKBOX feature tickbox and Blackbox port scenarios
2015-01-07 12:40:21 +13:00
26d6c1a562
Allow baud rate configuration on the Configuration tab.
2015-01-04 10:28:32 +00:00
8257efffa8
Fix GPS MSP message code for GPS signal strength indicators.
2015-01-04 09:34:56 +00:00
bfa689be40
Overhaul of the configuration tab.
2015-01-04 08:09:10 +00:00
597c96819b
Remove strange baseflight reference from the model HTML and CSS.
2015-01-04 01:34:46 +00:00
9f07f438e2
Update firmware flasher so it formats the release notes a little.
2015-01-03 22:29:32 +00:00
b9fbb5447d
Delete unused baseflight code from firmware flasher.
2015-01-03 22:10:08 +00:00
a69921e5c4
Added XBUS_MODE_B to serial rx configuration.
2015-01-03 01:09:59 +00:00
fe64fb3628
Merge pull request #30 from Roeland54/development
...
Fixed the displayed firmware-date in the firmware flasher.
2015-01-03 01:05:47 +00:00
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
68230b103e
Updating ports tab to use API version 1.1.
2015-01-02 19:31:51 +00:00
ebd5d27809
Sanitize the names of the handlers. Move code into named functions.
2015-01-02 19:31:51 +00:00
fe72557b12
Removing more review related code. Adding skeleton of new Ports tab.
2015-01-02 19:31:50 +00:00
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
de3494146c
Fixed firmware version Displayed hours.
2014-12-25 23:30:15 +01:00
f71eba5760
Fixed the displayed firmware-date in the firmware flasher.
2014-12-25 22:10:00 +01:00
7a800444b5
Force the user to pick a fimrware before loading
2014-12-25 00:02:18 +01:00
e938060be4
Reorganize MSP calls on setup tab so that the calibrate mag button is
...
enabled on the CJMCU target which does not implement the GPS msp
commands.
2014-12-21 23:17:41 +00:00
48f8c8f411
Fix wraping of 'master' slider on motors tab.
2014-12-21 14:03:09 +00:00
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
5112a73c74
Use larger calibrarion buttons and avoid text-wrapping on button labels.
2014-12-21 00:26:33 +00:00
968db92b81
Update CSS so that AUX 10-12 fit without wrapping.
2014-12-21 00:22:05 +00:00
8935054584
Fixed transposed URLs in firmware flasher
2014-12-20 11:16:35 +00:00
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
41a2ef3295
Re-instate use of MSP_CONFIG and updated MSP_MISC commands in
...
cleanflight.
2014-12-20 00:30:59 +00:00
e8bd813fb8
Re-implement model diagram on motors tab.
...
See 79505e42ed
2014-12-20 00:29:49 +00:00
ccc0b839e6
Minor tweaks to the firmwre flasher.
2014-12-19 19:48:19 +00:00
c6867d3c52
Update the firmware flasher to provide more details about the release.
...
Add warning message about target selection.
2014-12-19 16:04:42 +00:00
dac49093a0
Update firmware flasher so that it uses files available via the github
...
releases api.
2014-12-19 14:56:40 +00:00
2f9e2b13c5
fixed typos
2014-12-19 04:05:25 +01:00
a8a6b8904c
fixed async issues, added string formatter proto
2014-12-19 03:58:42 +01:00
6051876f23
commit of broken code for a js expert to fix.
2014-12-19 01:30:48 +00:00
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
9cf60224b2
Added Warning Cell Voltage
...
Added Warning Cell Voltage to Battery voltage in Configuration tab. When battery has deployed to level that is defined with warning cell voltage buzzer starts slow beeping and copter can still land safely. When min voltage is reached beeper start fast "screaming" and LIPO is empty (to point when it could be damaged from over discharging if using that default 3.3V).
2014-12-09 10:37:02 +02:00
c0284f1134
ditch some empty callbacks that are now gracefully handled inside the serial layer
2014-12-06 15:35:12 +01:00
c005b7604c
add vtail/atail quad models from norem
...
#58
2014-12-05 17:25:33 +01:00
21e414f4b3
fix method name mismatch in serial layer
2014-12-05 10:23:53 +01:00
843aa8634a
add MSP to supported serial RX array
2014-11-29 21:44:28 +01:00
2e88daa806
fix style
2014-11-29 10:16:53 +01:00
4df1e9aafc
Merge pull request #66 from jaahaavi/master
...
Updated GPS settings
2014-11-29 10:15:19 +01:00
277d39109a
sort out dates in js
2014-11-26 16:32:17 +01:00
7f2dab0e4a
moving to different time format
2014-11-26 12:34:32 +01:00
b2cb677869
Updated GPS settings
...
- Added SBAS disabled (-1) to configuration tab
- Fixed GPS signal strength bars
2014-11-23 11:41:24 +02:00
5e165b286b
implemented simple review mechanism
2014-11-21 08:40:43 +01:00
b7e6f66a3d
add adjusted svg graphics for V tail and A tail quad from norem
...
#58
2014-11-19 19:36:11 +01:00
df79edc0ad
fix gps distance to home not updating in GPS tab
2014-11-17 19:58:12 +01:00
dc633f2421
fix release/time sorting of fetched builds, optimize, needs more testing
2014-11-15 02:18:04 +01:00
366cd018b2
whops, fixing trailing commas
2014-11-15 01:18:04 +01:00
66ab7d1093
add A-tail Quad to supported multiTypes, no svg & using custom svg and default 3D model at the moment
...
#58
2014-11-14 12:11:22 +01:00
7a0d3a1199
handle all sorts of edge cases that would otherwise break UI or functionality
2014-11-11 11:59:12 +01:00
97e37347d6
implementing the highly wanted select box for hand picking firmware builds that are available on baseflight.net
2014-11-10 21:33:32 +01:00
135b4e6905
Set a default rnage when enabling an adjustment. Show the channel
...
marker.
2014-11-09 04:55:52 +00:00
56a3b7c52b
Some cleanup of the auxilary tab code.
2014-11-09 04:54:12 +00:00
902da2f91d
Add 'Adjustments' tab.
...
Cleanup 'Auxilary' tab code.
Rename other tabs to have shorter titles.
2014-11-09 00:46:12 +00:00
a31282c6a3
fix vbatmincellvoltage and vbatmaxcellvoltage scale factors inside output cruncher
2014-11-03 18:36:29 +01:00
3a4b41b259
assign correct error message for fetching online firmware
2014-11-03 16:57:08 +01:00
72447a6103
set release filter to accept NAZE only
2014-11-03 16:53:54 +01:00
5cff317208
Changed model extensions from `.js.` to `.json` fitting with export from
...
latest three.js exporter.
725819c98d
2014-11-02 19:04:32 +11:00
a7c3779b25
Added some new models
2014-10-31 23:42:26 +11:00
59df068b63
rename all underlying references inside the renamed files
2014-10-30 12:47:52 +01:00
0cd315b5e7
rename files to better correspond to their specific tabs
2014-10-30 12:43:35 +01:00
e401b1ffce
renaming some of the appview hits
2014-10-30 12:33:39 +01:00
561758b2a8
tweak obsolete class names and css
2014-10-25 14:04:38 +02:00
0af8d7d453
normalize css indentation in gps and firmware flasher (missed it the first time somehow)
2014-10-24 16:58:07 +02:00
ad005a3f1c
revamped option part of firmware flasher UI
2014-10-24 16:55:42 +02:00
ed7600facc
implement support for flashing development firmware (first iteration, done via checkbox)
2014-10-24 15:36:19 +02:00
569122392e
planned cache and interval speed optimizations
2014-10-19 15:29:55 +02:00
3c4307ae57
add initialization timeout for flash on connect, rework functionality so each new detected port can trigger flashing sequence
2014-10-19 09:38:39 +02:00
b6097d6271
move parse_hex function away from the global context
2014-10-19 04:18:05 +02:00
f64b558d5c
Update the default channel mode range to match the old MultiWii MID
...
checkbox.
2014-10-18 16:50:53 +01:00
a08ae2b7c6
Update donation links.
2014-10-14 16:32:45 +01:00
a517aeef36
Removing unused css selectors.
2014-10-13 19:05:45 +01:00
7400a2af2f
Internationalize mode range copy.
2014-10-13 18:59:26 +01:00
Dominic Clifton
Austin St. Aubin
Nicholas Sherlock
Patrick Forringer
Larry (TBS)
Kyle Christensen
tricopterY
ProDrone
borisbstyle
Paul Rogalinski
Mauro Mombelli
bradnon
bradnon
Richard Birkby
decompyler
Krzysztof Rosinski
enly1
Stefan Grufman
Marc Egli
Roeland Lutters
Thomas Greer
Paul Rogalinski
jaahaavi
cTn
jeff