b1eb21cb78
Bump date.
2015-07-13 02:09:24 +01:00
687c0f1a84
Remove legacy servo configuration which originated from the overloaded
...
use of the servo 'rate'. All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00
1cb64130cc
update servo tab on configurator
...
1) work around 1.9.0 MSP buffer size bug.
2) support updated API for 1.12 (CF >= 1.10.0)
2015-07-13 00:02:58 +01:00
4e41f46523
First cut of support for custom airplane and tricopter on servos tab.
2015-06-28 23:19:03 +01:00
438dc8d46d
Some changes required for the 'custom-servo-mixers' cleanflight branch.
...
TODO - Support old version of MSP_SERVO_CONF
2015-06-28 22:30:36 +01:00
8d39b3f8cc
Fix handling of MSP_SERVO and MSP_MOTOR. Previously the code assumed
...
there was always 8 servos and 8 motors.
2015-06-01 11:02:09 +01:00
774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
dec46c0d30
Update changelog and prepare for release
2015-05-23 15:03:45 +01:00
5707a12858
Fix for some incorrect data being left in the data structures after
...
connecting to two different firmware revisions.
This is a hack, the true fix should be to re-initialise the data
structures that are found in data_storage.js. See #197
2015-05-23 15:03:15 +01:00
322b7c1085
Fix access to `RC_YAW_EXPO` in `MSP_RC_TUNING` data packet
2015-05-22 21:37:04 +02:00
ab883c6dc5
Cleanup code indention and positioning the rc_yaw_expo field
2015-05-22 21:37:03 +02:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
5471ab7f65
Add support for STM32 Extended Erase to allow erasing only needed pages.
2015-05-22 02:18:40 +01:00
2f6160d6a1
Merge branch 'eziosoft-master' into development
2015-05-22 00:27:38 +01:00
90cc08c86b
Test and cleanup STM32 extended erase bootloader command support.
...
Note: entire chip only for now - 'Full Chip Erase' checkbox is ignored.
2015-05-22 00:27:09 +01:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
ef682cdca9
STM F3 support
...
Partial F3 support. Should be enough to flash correctly.
Currently only full chip erase is supported.
IT IS NOT TESTED AT ALL as I don't have hardware
2015-05-19 03:04:40 +02:00
d18e5a9559
Merge branch 'manual_comport_selection' of git://github.com/pulsar256/cleanflight-configurator into pulsar256-manual_comport_selection
2015-05-17 23:11:58 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
8913b8bb1c
handle setups with no non-bt serial ports - for real
2015-05-10 22:30:00 +02:00
21a75ea7d3
gui cosmetics, handle setups with no non-bt serial ports
2015-05-10 21:51:16 +02:00
1bb63a597b
manual port override as chrome won't enumerate bluetooth serial ports on linux
2015-05-10 14:37:31 +02:00
d10023ec4b
Update changelog and prepare for release.
2015-05-09 04:36:30 +01:00
0f95f4ec4c
Improve MSP handling of servo configuration. Fixes backup of CJMCU
...
boards.
2015-05-07 22:47:32 +01:00
244685c9a6
Update version checking code to use semantic versioning - see
...
http://semver.org/
semver.js creating using browserify.
https://www.brcdn.org/?module=semver&version=4.3.4
2015-05-07 22:10:26 +01:00
e781e14617
fix for undefined function
...
ArrayBuffer does NOT have length but byteLength parameter.
2015-04-28 10:20:48 +02:00
37a1c0d3e7
Update changelog and prepare for release.
2015-04-14 13:33:38 +01:00
bf353192ef
Avoid backing up invalid looptime/arming configuration for firmware with
...
api < 1.8
2015-04-14 13:29:44 +01:00
2398f10b62
Fix for restoring backups created with 0.63.0 for firmwares with api <
...
1.8.0 that were saved with incorrect looptime.
2015-04-14 13:25:45 +01:00
77d608063d
Prepare for release.
2015-03-29 16:18:54 +01:00
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
2e046db53e
Ensure offset variable is updated consistently in MSP_MISC.
...
See 9261163ca2
2015-03-29 12:06:33 +01:00
54c5d9b44c
Reworked msp.js - MSP_ARMING_CONFIG, MSP_SET_ARMING_CONFIG
2015-03-29 08:58:01 +11:00
e362130810
Reworked data_storage.js - ARMING_CONFIG
2015-03-29 08:45:08 +11:00
68dbf1707e
Merge pull request #11 from cleanflight/development
...
Sync to latest changes
2015-03-23 08:43:54 +11:00
52d7670977
Move apiVersion to appear before profiles in backup file.
2015-03-22 09:25:32 +00:00
2e5acfc1bd
Fix the 0.63.0 serial port configuration migration code.
2015-03-22 09:19:10 +00:00
a1f932f36a
Reworked msp.js - new code MSP_ARM_CONFIG etc
2015-03-18 14:46:24 +11:00
e5235e46e6
Code style check data_storage.js
2015-03-18 14:29:09 +11:00
ea78239cac
Reworked data_storage.js - ARM_CONFIG and LOOP_TIME
2015-03-18 14:24:50 +11:00
9261163ca2
Reworked msp.js
...
MISC.auto_disarm_delay, MISC.disarm_kill_switch are CONFIG.apiVersion dependent
2015-03-15 17:04:40 +11:00
fde8edfe1e
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:17:30 +11:00
fc656d4ac2
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:08:29 +11:00
2863077ee3
Merge remote-tracking branch 'upstream/development' into development
2015-03-14 10:19:24 +13:00
e462439c1b
Upgrade D3 library to 3.5.5.
...
See http://d3js.org/
2015-03-12 00:14:39 +00:00
8160e8e353
Merge branch 'development' of https://github.com/tricopterY/cleanflight-configurator into development
...
Conflicts:
js/msp.js
tabs/pid_tuning.html
tabs/pid_tuning.js
2015-03-12 00:40:15 +01:00
b2be2853b4
Provide a migration path from pre-1.8.0 firmware backups.
2015-03-11 23:34:24 +00:00
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
abbfe1d763
Update jquery.flightindicators.js
2015-03-11 16:57:50 +11:00
Dominic Clifton
ProDrone
borisbstyle
Bart
Paul Rogalinski
Mauro Mombelli
tricopterY
Nicholas Sherlock