fb46711659
Cleanup looptime configuration.
2015-07-13 19:07:39 +01:00
be93f37416
Merge branch 'looptime' of https://github.com/tricopterY/cleanflight-configurator into tricopterY-looptime
2015-07-13 18:18:18 +01:00
64d7808e28
Merge pull request #201 from kchristensen/ff-typo-fix
...
Fix minor typo in firmware flasher
2015-07-13 18:15:50 +01:00
3e7da266ab
Merge pull request #214 from sherlockflight/dataflash-refresh
...
Update used flash size before dataflash save begins so that new data is not missed
2015-07-13 18:12:18 +01:00
ee27327c67
Update changelog.
2015-07-13 02:31:23 +01:00
12048ac7c1
Update links and sponsors.
2015-07-13 02:31:14 +01:00
b1eb21cb78
Bump date.
2015-07-13 02:09:24 +01:00
687c0f1a84
Remove legacy servo configuration which originated from the overloaded
...
use of the servo 'rate'. All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00
1cb64130cc
update servo tab on configurator
...
1) work around 1.9.0 MSP buffer size bug.
2) support updated API for 1.12 (CF >= 1.10.0)
2015-07-13 00:02:58 +01:00
c0138f5f82
Sprinkle some help for common causes of error to reduce burned on
...
developers and community.
2015-07-12 21:35:25 +01:00
d8c41fb3c7
Show channel forwarding feature if available.
2015-07-12 20:44:43 +01:00
cb12833b37
Bump version.
2015-07-12 20:44:04 +01:00
4203413b74
Escape < and > characters from the cli.
2015-06-29 03:33:17 +01:00
58bcbe876c
Allow gimbal servos to be configured when enabled.
2015-06-29 03:32:42 +01:00
4e41f46523
First cut of support for custom airplane and tricopter on servos tab.
2015-06-28 23:19:03 +01:00
438dc8d46d
Some changes required for the 'custom-servo-mixers' cleanflight branch.
...
TODO - Support old version of MSP_SERVO_CONF
2015-06-28 22:30:36 +01:00
dae3c3b2cf
Update used flash size before save begins so that new data is not missed
2015-06-22 22:39:32 +12:00
8d39b3f8cc
Fix handling of MSP_SERVO and MSP_MOTOR. Previously the code assumed
...
there was always 8 servos and 8 motors.
2015-06-01 11:02:09 +01:00
bc6d8513ea
Fix typo in firmware flasher
2015-05-26 18:22:48 -04:00
17d525352f
Allow FC loop time change via Configuration Tab
2015-05-26 16:28:58 +10:00
774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
34e8c55a00
Merge pull request #184 from ProDrone/yaw-expo
...
Fixed: Access to Yaw expo in Receiver Tab
2015-05-25 23:36:38 +01:00
b1f06ac802
Merge pull request #194 from sherlockflight/whitespace
...
Preserve consecutive whitespace characters in CLI output
2015-05-25 23:19:14 +01:00
e10d8997c4
Fix duplicate option with value '0` for firmware selection. Fixes #195
2015-05-25 23:17:59 +01:00
41cd7f3f18
Update motors tab to handle armed state. Re-order HTML elements on
...
motors tab.
2015-05-25 23:07:08 +01:00
dec46c0d30
Update changelog and prepare for release
2015-05-23 15:03:45 +01:00
5707a12858
Fix for some incorrect data being left in the data structures after
...
connecting to two different firmware revisions.
This is a hack, the true fix should be to re-initialise the data
structures that are found in data_storage.js. See #197
2015-05-23 15:03:15 +01:00
487adf3275
Cleanup welcome tab layout.
2015-05-23 14:57:27 +01:00
9efa585c04
Move firmware flasher progress bar to the bottom next to the buttons.
2015-05-22 20:51:16 +01:00
322b7c1085
Fix access to `RC_YAW_EXPO` in `MSP_RC_TUNING` data packet
2015-05-22 21:37:04 +02:00
ab883c6dc5
Cleanup code indention and positioning the rc_yaw_expo field
2015-05-22 21:37:03 +02:00
502a70233a
update
2015-05-22 21:37:02 +02:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
5471ab7f65
Add support for STM32 Extended Erase to allow erasing only needed pages.
2015-05-22 02:18:40 +01:00
2f6160d6a1
Merge branch 'eziosoft-master' into development
2015-05-22 00:27:38 +01:00
90cc08c86b
Test and cleanup STM32 extended erase bootloader command support.
...
Note: entire chip only for now - 'Full Chip Erase' checkbox is ignored.
2015-05-22 00:27:09 +01:00
bc6453dc5a
Preserve consecutive whitespace characters on CLI output
2015-05-21 20:56:01 +12:00
d749304ec4
Fix missing slash in a url.
2015-05-20 19:12:58 +01:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
6b93e354c8
Show Pitch P/I/D and Roll P/I/D in-flight adjustments when using
...
firmware 1.9.0. Fix missing 'Roll D' inflight adjustment.
Latest Cleanflight release candidate 1.9.0 now has support for them.
Previously it was unknown if the code was going to be in the 1.9.0 or
1.9.1 release.
2015-05-20 00:58:03 +01:00
ef682cdca9
STM F3 support
...
Partial F3 support. Should be enough to flash correctly.
Currently only full chip erase is supported.
IT IS NOT TESTED AT ALL as I don't have hardware
2015-05-19 03:04:40 +02:00
5f05e4c8cc
Support inflight pitch/roll rate adjustments for fc version >= 1.8.0 and
...
pitch p,i,d and roll p,i,d adjustments for fc version => 1.9.1
2015-05-18 00:09:29 +01:00
f2e471e1d8
Improve styling of manual port selection.
2015-05-17 23:23:39 +01:00
d18e5a9559
Merge branch 'manual_comport_selection' of git://github.com/pulsar256/cleanflight-configurator into pulsar256-manual_comport_selection
2015-05-17 23:11:58 +01:00
f560ffa924
Fix missing whitespace in the mag calibration message.
2015-05-17 23:10:12 +01:00
14caed2a2f
- sorting firmware selection by version and name
2015-05-17 23:01:27 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
16e5ab57be
Add SPRacing and Paris Air Hero 32 to the list of boards.
2015-05-17 00:12:18 +01:00
8913b8bb1c
handle setups with no non-bt serial ports - for real
2015-05-10 22:30:00 +02:00
Dominic Clifton
Nicholas Sherlock
Kyle Christensen
tricopterY
ProDrone
borisbstyle
Bart
Paul Rogalinski