faf4a26360
Fix pid tuning tab active subtab
2019-09-07 10:27:38 +02:00
9c98bbfd79
Move ESC_SENSOR to the ESC/Motor box ( #1622 )
...
Move ESC_SENSOR to the ESC/Motor box
2019-09-07 12:35:03 +12:00
19f3548fa7
Fix vtx table inputs not always responsive ( #1619 )
...
Fix vtx table inputs not always responsive
2019-09-07 12:32:48 +12:00
619f3f7d5c
Fix CSS button at the MSP TX window ( #1618 )
...
Fix CSS button at the MSP TX window
2019-09-07 12:32:36 +12:00
633955e098
Merge pull request #1617 from IvoFPV/d-min-fix
...
Fix dmin on/off calculation and dmin limit
2019-09-07 12:30:38 +12:00
9f63b994b9
Merge pull request #1616 from etracer65/mode_show_arming_disabled
...
Add visual indicator on ARM mode when arming is disabled by the firmware
2019-09-07 12:30:18 +12:00
2ba51a8019
Merge pull request #1615 from IvoFPV/vtx-warning
...
Add warning if Smartaudio port assigned and VTX table not set up
2019-09-07 12:30:03 +12:00
b28ed22726
throw out unused opensans files
...
mainly looking to throw out .html
I've left ttf as I think the woff/woff2 are generated from ttf
2019-09-06 23:51:11 +00:00
59d9832efa
stop board selection from being dropped
2019-09-06 22:13:09 +00:00
f6934f234f
consider versions for unified targets
2019-09-06 10:05:29 +00:00
7bd1f16a52
Merge pull request #1587 from Docteh/flashunification
...
initial go at flashing unified target with a config
2019-09-06 07:49:48 +12:00
0c4e53e4aa
clean up, refactor a little
2019-09-06 01:38:37 +12:00
85e2472010
Move ESC_TELEMETRY to the ESC/Motor box
2019-09-05 09:21:09 +02:00
f7275c25f3
translate the (Legacy) bit, and only show it where needed
2019-09-05 04:15:22 +00:00
c46631d7a2
Ensure that loading message is provided.
2019-09-05 04:15:22 +00:00
16cabc93a4
initial go at flashing unified target with a config
2019-09-05 04:15:22 +00:00
386c757e45
Removed Dshot1200 protocol. ( #1614 )
...
Removed Dshot1200 protocol.
2019-09-05 02:09:00 +12:00
4e6076756e
refactor CSS references to Open Sans font ( #1613 )
...
refactor CSS references to Open Sans font
2019-09-05 01:55:31 +12:00
d6a86dd3c3
Add visual indicator on mode when arming is disabled
...
If arming is disabled (at the firmware level) but the channel is withing the arming mode activation range, display the mode in red to indicate arming not available.
2019-09-04 07:44:25 -04:00
7f1934b946
Merge pull request #1612 from McGiverGim/vtx_load_save
...
Add save/load buttons for the VTX Table
2019-09-04 23:30:16 +12:00
26706f289a
Fix dmin on/off calculation and dmin limit
2019-09-04 12:42:40 +02:00
ca6b1f4e0e
Add save/load buttons for the VTX Table
2019-09-04 12:03:00 +02:00
df79e2cb96
Fix vtx table inputs
2019-09-04 11:23:12 +02:00
a3042e39cc
Fix CSS button at the MSP TX window
2019-09-04 08:39:09 +02:00
5b7d9bfa52
Add warning if SA port assigned and no Vtx Table
2019-09-03 19:35:08 +02:00
054ab5e02a
Added 0 terminator to custom defaults before flashing. ( #1611 )
...
Added 0 terminator to custom defaults before flashing.
2019-09-04 01:11:09 +12:00
4985e86ecc
Keep active subtab selected on PID Tuning tab, change displayed… ( #1610 )
...
Keep active subtab selected on PID Tuning tab, change displayed data …
2019-09-04 01:08:24 +12:00
7e77e91597
Removed Dshot1200 protocol.
2019-09-03 23:00:20 +12:00
ae875339da
refactor CSS references to Open Sans font
...
The old way of using Open Sans was taking some browser quirk into consideration, instead of asking for the web font such as 'Open Sans' in bold, css would ask for a font called 'open_sansbold'
I also found two instances of 'regularbutton' class being defined for tabs, while the class is styled globally in main.css
This fixes a bug I caused where on Windows you can just ask for a bold version of a font, and it'll do it. macOS doesn't really do this properly, so the langauge selector was hard to see.
2019-09-03 08:03:25 +00:00
cd7f305bef
Merge pull request #1605 from McGiverGim/msp_multiple_msp
...
Add MSP_MULTIPLE_MSP command
2019-09-02 22:52:23 +12:00
bb2334ca56
Add MSP_MULTIPLE_MSP command
2019-09-02 12:32:01 +02:00
f1ce8075ad
keep active subtab selected on PID Tuning tab, change displayed data only
2019-09-02 11:25:36 +02:00
2336f6bd6f
Added 0 terminator to custom defaults before flashing.
2019-09-02 20:55:51 +12:00
f547d84eef
Gyro filtering restructure debug modes ( #1607 )
...
Gyro filtering restructure debug modes
2019-09-01 15:41:18 +12:00
0daa22d5ea
Gyro filtering restructure debug modes
2019-08-30 13:58:25 +02:00
9d6f35c7f5
Change the tooltip attach method ( #1604 )
...
Change the tooltip attach method
2019-08-30 01:31:27 +12:00
19106ae6cb
Merge pull request #1602 from McGiverGim/add_telem_info_motors
...
Add telemetry dshot data info to the motors tab
2019-08-30 01:19:01 +12:00
34f735e1e7
Change the tooltip attach method
2019-08-28 11:59:19 +02:00
b065c8f4f7
Add telemetry dshot data info to the motors tab
2019-08-28 11:50:47 +02:00
a1349e6ac5
Merge pull request #1599 from IvoFPV/add-auto-smoothness-to-ui
...
Add rc smoothing auto smoothness to UI, fix refresh button and slowdown
2019-08-28 17:21:53 +12:00
ed824563a1
Fixed structure of VTX tab Introduction string ( #1600 )
...
Fixed structure of VTX tab Introduction string
2019-08-28 12:08:11 +12:00
67e11bb6e0
Fixed typo on vtxTablePowerLevelsTableHelp
...
County -> Country
2019-08-27 08:38:07 -03:00
759265cf8f
Fixed structure of VTX tab Introduction string
...
From:
You can configure here the values for your Video *Trasmitter* (VTX). You can consult and configure the values of the transmission including the VTX Tables if the flight controller and the VTX support it
To:
Here you can configure the values for your Video Transmitter (VTX). You can view and change the transmission values, including the VTX Tables, if the flight controller and VTX support it
2019-08-26 16:54:20 -03:00
c51217a585
Indentation, remove parsing
2019-08-26 10:36:33 +02:00
70464f5ff2
Add rcsmoothing auto smoothness to UI
2019-08-25 20:06:09 +02:00
e3e79f6e81
Merge pull request #1584 from IvoFPV/piduiov2
...
Improve PID Tuning tab style and layout
2019-08-25 13:44:10 +12:00
1cefc1303a
Merge pull request #1595 from Docteh/sensors
...
reorder config requests on sensors tab
2019-08-25 11:12:31 +12:00
c77fe48be9
Merge pull request #1582 from hydra/support-reboot-to-flash-bootloader
...
Replace legacy firmware reboot sequence with MSP based sequence.
2019-08-25 10:26:39 +12:00
4c0e9f06e5
Replace legacy firmware reboot sequence with MSP based sequence.
...
This allows two things:
1. good user experience when flashing devices that use FLASH
bootloaders. previously users would have to use `bl flash` or enter
flash bootloader manually.
2. arbitrary setting of cli reboot character without breaking ability to
reboot flash via configurator.
Squashed commits:
* Extract MSPConnector from code in stm32.js to allow reuse.
* Use reboot_baud when connecting via MSP.
* Ensure GUI connect is unlocked after connect failures.
* Support legacy reboot method for old firmware.
* Don't treat MSPConnector as a singleton.
* Fix `port` usage in handlers.
* Add short delay after closing serial port before re-opening it again.
2019-08-24 22:11:35 +02:00
34ca57fec2
Fix wrapping
2019-08-24 18:19:51 +02:00
IvoFPV
Michael Keller
Kyle K
Miguel Angel Mulero Martinez
Bruce Luckcuck
Károly Kiripolszky
Leo Bottaro
Hydra