469d174c68
Apply old mag_declination method for API < 1.18
2016-04-20 22:04:36 +02:00
0518ed6993
Issue #74 : Show battery & statuses in top bar
...
- Battery voltage appears as a horizontal bar
- Autodetection of battery type is used to calculate the bar min, max &
alarm values according to the battery configuration parameters.
- Color changes to red when battery level goes under the alarm setting
- Armed, failsafe and Serial Link status icons below battery voltage
monitor
- Change calibration button contents to "Calibrating" during calibration
2016-04-20 01:38:23 +02:00
a6807d5945
Issue #153 finer mag_declination in GUI
...
Allow declination to be set exactly in degrees,minutes (therefore uses
exactly the same value as in CLI instead of rounding it)
2016-04-18 23:19:07 +02:00
81a49d48b2
changes to support MSP API 1.17 (removal of 3d deadband configuration
...
via MSP_3D/MSP_SET_3D)
At somepoint we can add the support for the updated
MSP_DEADBAND/MSP_SET_DEADBAND commands.
2016-04-01 12:32:19 +02:00
a924e06c1b
Fix unable to enable LTM telemetry via ports tab.
2016-03-24 16:02:54 +01:00
c0038b43cc
Force a cleanup when a serial device is lost, this happens when VCP
...
targets reboot.
2016-03-24 14:51:13 +01:00
ae700e6daf
Prepare for release.
2016-02-22 19:12:43 +01:00
d319132135
Avoid exceptions when serial break or overruns occur without `info`
...
object.
2016-02-22 18:46:33 +01:00
576ba7390c
Prepare for release.
2016-02-05 03:11:26 +01:00
ed9927a4e5
Merge branch 'page-size' of https://github.com/tracernz/cleanflight-configurator into tracernz-page-size
2016-01-30 12:18:30 +01:00
9fbb6337b6
DFU: Support STM32F4
2016-01-28 22:48:44 +13:00
b46a5e8053
USB-DFU: Detect flash page size from USB descriptor
2016-01-25 19:27:26 +13:00
ab7ad4b07d
Handle 'overrun' conditions the same way as 'break' conditions.
2016-01-22 22:15:56 +01:00
2f6be0650f
Serial: Attempt recovery of break condition
2016-01-22 22:15:56 +01:00
2044fe879c
Fix for https://github.com/cleanflight/cleanflight/issues/1551
2016-01-22 22:15:55 +01:00
509adcb6ff
Update servo angles to match
...
https://github.com/cleanflight/cleanflight/pull/1573
2016-01-22 22:15:54 +01:00
1a58bfcf82
Add Race Transponder configuration support.
...
Also cleans up i18n support for 'features' and adds tooltip support for
them on the configuration tab.
2016-01-22 22:15:53 +01:00
dea4cef2c2
Handle 'overrun' conditions the same way as 'break' conditions.
2016-01-12 19:35:13 +01:00
f5cbea905a
Merge pull request #307 from tracernz/unbreak
...
Serial: Attempt recovery of break condition
2016-01-12 19:29:05 +01:00
0d3fbbddac
Fix for https://github.com/cleanflight/cleanflight/issues/1551
2016-01-12 11:24:53 +01:00
66034a1831
Update servo angles to match
...
https://github.com/cleanflight/cleanflight/pull/1573
2016-01-11 15:37:36 +01:00
5c2273bd65
Reset all FC configuration state on connect to prevent side effects when
...
configuring multiple FC's without restarting the configurator each time.
2016-01-08 12:45:58 +01:00
4ccd0bed3e
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/data_storage.js
main.css
tabs/dataflash.css
tabs/dataflash.html
2016-01-07 20:58:29 +01:00
25e97902c4
Merge branch 'tooltip_i18n_title_review' of https://github.com/tricopterY/cleanflight-configurator into tricopterY-tooltip_i18n_title_review
2016-01-07 00:36:47 +01:00
c58829ba14
some renaming to RC_DEADBAND in the receiver tab
2015-12-27 18:56:00 -05:00
d70a3f6e69
correcting Typo ;) RC_DEADBAND
2015-12-27 18:36:37 -05:00
952afb1e46
renaming RC_CONTROLS to RC_READBAND
2015-12-27 16:22:37 -05:00
1aeb244a91
Merge remote-tracking branch 'upstream/NewPIDFunctions' into NewPIDFunctions
2015-12-27 16:18:06 -05:00
a13db678a9
adapting RC_CONTROLS to Dominic's changes
2015-12-27 16:17:41 -05:00
f1a29d29e6
added save message for RC_CONTROLS
2015-12-27 16:01:09 -05:00
7e736242d7
Serial: Attempt recovery of break condition
2015-12-24 00:12:59 +00:00
adfb93085c
replacing RC_CONTROLS with RC_DEADBAND
2015-12-18 18:08:38 +01:00
3228625de1
jBox Tooltip implementation using i18n_title instead of jBox:Content - reduces DOM element counts
2015-12-18 13:43:05 +11:00
251712c85d
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/msp.js
2015-12-18 01:56:57 +01:00
47bf426c29
fix
2015-12-18 00:07:00 +01:00
f07cea070e
error fix
2015-12-17 23:50:51 +01:00
ba18e4eee1
Merge branch 'cleanflight/development' into NewPIDFunctions
...
# Conflicts:
# js/backup_restore.js
# js/msp.js
2015-12-17 23:46:09 +01:00
2641770300
fixed indention
2015-12-17 11:41:02 +01:00
1a0c6735a9
RXFAIL send method that allows more future RX channels
...
- Fixed the bug found by Nighthawk32
- Correction for camelCase
- Some bugfixes
2015-12-17 11:33:39 +01:00
70b35f22c9
msp corrections
2015-12-17 00:32:59 +01:00
5160855b93
Merge pull request #76 from NightHawk32/NewPIDFunctions
...
Hint by ProDrone: fixing double-save on backup restore
2015-12-16 22:47:13 +01:00
c58335bd5b
msp.js change (thanks ProDrone)
2015-12-16 22:34:10 +01:00
dc8f06fcc9
Hint by ProDrone: fixing double-save on backup restore
2015-12-16 16:19:27 -05:00
0b3f1a48fb
Merge branch 'cleanflight/development' into NewPIDFunctions
2015-12-16 20:53:37 +01:00
b4730034c8
Disconnect on F1 boards when 'break' is received if connected. This
...
happens when the device reboots due to incorrect hardware
initialisation. This prevents the GUI saying 'waiting for data'.
See https://github.com/cleanflight/cleanflight/pull/1436
Since the problem is already fixed in firmware there's not much reason
to spent development working on additional GUI fixes. A disconnect will
suffice.
2015-12-16 14:49:58 +01:00
63dde67097
correction
2015-12-16 02:53:43 +01:00
da1f456b87
Messed up some brackets
2015-12-15 16:00:01 -05:00
a72a00a2de
Fixing backwards compatibility of prodrone's failsafe tab
2015-12-15 14:45:09 -05:00
f21c169d74
Add support for SPRacingF3Mini.
2015-12-15 13:22:21 +01:00
55a2677a2b
Merge branch 'development' into thenickdude-private-development
...
Conflicts:
js/data_storage.js
js/gui.js
js/msp.js
main.html
tabs/dataflash.css
tabs/dataflash.js
2015-12-15 12:35:52 +01:00
c1a7452b27
Merge remote-tracking branch 'upstream/NewPIDFunctions' into NewPIDFunctions
...
Conflicts:
js/backup_restore.js
js/data_storage.js
js/msp.js
2015-12-15 01:27:55 -05:00
d4969d73a1
resolving conflicts
2015-12-15 01:59:58 +01:00
2d6feb0e6a
Merge branch 'cleanflight/development' into NewPIDFunctions
...
# Conflicts:
# _locales/en/messages.json
# js/backup_restore.js
# js/data_storage.js
# js/msp.js
# tabs/configuration.html
2015-12-15 01:43:24 +01:00
bd98aca67f
Merge branch 'new_stuff' of
...
https://github.com/skaman82/cleanflight-configurator into
skaman82-new_stuff
Fix up messages.json formatting.
Conflicts:
_locales/en/messages.json
2015-12-15 00:51:42 +01:00
067999c5e8
added MSP support for sensor orientation, some fixes for 3D backup and restore
2015-12-14 18:06:25 -05:00
c498e7de34
Added support for failsafe TAB
...
Made in cooperation with skaman82.
Summary of modifications:
- Extended data storage to hold data for new/changed MSP messages.
- Added support for added/changed MSP messages.
- Added assigned mode(s) to AUX labels.
- Tooltip changes.
- Included style modifications to configuration tab from Skaman82.
- Moved all texts from failsafe tab .html to `messages.json`.
- Removed failsafe settings from configuration tab (now obsolete).
- Added failsafe-tab variables to Backup & Restore.
- Reorganized stage 2 elements, cleanup and corrections.
2015-12-13 17:50:26 +01:00
19e6f9026b
PID controllers can now be reset to defaults
2015-12-12 18:42:49 -05:00
5ba359fe17
FIX: LED config from backup file was not saved to EEPROM after reading the file
2015-12-12 15:36:05 -05:00
6d7c6a4576
FIX: RC controls is profile dependent, now this saving for every profile
2015-12-12 14:41:32 -05:00
1df0a14877
MSP communication for deadband and yaw_deadband
2015-12-09 18:56:42 -05:00
4e12db9c5e
Convert dataflash tab to a new Blackbox tab with SD card support
2015-12-04 15:49:51 +13:00
16442c40a4
Merge branch 'cleanflight/development' into new_stuff
2015-11-28 22:12:31 +01:00
0149901597
Prepare for release.
2015-11-28 15:23:48 +00:00
5907b4c019
Merge pull request #278 from wanderzell/development
...
Fix for issue #274 (checkboxes on firmware flasher)
2015-11-28 11:37:19 +00:00
7ca376926a
Some code styling and cleanup.
2015-11-25 15:06:17 -05:00
d21b4a157f
Typo in css classes, update global dataflash display on every dataflash summary respond.
2015-11-24 18:17:53 -05:00
6157c875f9
Renamed global dataflash components, fixed detection for global dataflash display.
2015-11-24 18:01:56 -05:00
11fcf24258
Fixed bug with profile selector: It updates now on every status request.
2015-11-23 01:47:09 -05:00
3c05c218c5
Code cleanup for profile selector.
2015-11-22 16:08:59 -05:00
7531ce69fe
Profile is now changable globally.
2015-11-22 16:00:01 -05:00
168b412089
Fix for firmware flasher checkboxes not restoring saved state issue #274 .
2015-11-17 00:54:10 +02:00
644c8da1cf
Merge branch 'cleanflight/development' into new_stuff
2015-11-16 23:44:14 +01:00
ec57aa9d1a
Fix 3D support.
...
Add missing backup and restore functionalty
Add missing configuration migration logic
Add missing visibility toggling of 3D section when API version <
`1.14.0`
Add missing logic for issuing the correct sequence of MSP commands
issues when API version < `1.14.0` when viewing the configuration tab.
2015-11-16 22:28:21 +00:00
13aac48a79
Merge remote-tracking branch 'cleanflight/development' into new_stuff
...
# Conflicts:
# _locales/en/messages.json
# tabs/pid_tuning.html
2015-11-16 23:13:35 +01:00
e801cd260a
Merge branch 'master' of https://github.com/NightHawk32/cleanflight-configurator into NightHawk32-master
2015-11-16 21:44:11 +00:00
6b97eb2809
Further work on dataflash and profile switch in the header
2015-11-16 12:46:59 +01:00
19897cd574
started to work on new GUI functionality
2015-11-15 23:35:22 +01:00
65762587ba
Cleanup tabs, whitespace & comments.
2015-11-14 11:20:08 +00:00
d32ba714bf
Fixing whitespace and indentation.
2015-11-14 11:16:54 +00:00
5de5f6d191
Merge remote-tracking branch 'cleanflight/development' into GUI-optimization
2015-11-14 01:49:10 +01:00
ac78dbc8c0
Support cleanflight API 1.14.0 (pid controller removal/reindex).
2015-11-14 00:41:23 +00:00
904a55c930
Adding fixes for 3D to the newest version
...
Merge remote-tracking branch 'upstream/master'
Conflicts:
tabs/configuration.html
2015-11-12 17:34:21 -05:00
990fd26eb9
Including fixes from wanderzell
...
• fixes small css bug with tooltip icons
• fixes sensor icons nit showing up when connecting Naze32 Acro rev6
and Sparky1.1
2015-11-12 09:56:03 +01:00
a63e628eac
updating hydras changes
2015-11-11 22:17:54 +01:00
0880343488
Merge remote-tracking branch 'cleanflight/development' into GUI-rework
...
# Conflicts:
# main.js
# tabs/landing.js
2015-11-11 22:08:19 +01:00
31cd2de3d3
Added 3D configuration parameters so they don't have to be changed in the CLI
2015-11-11 16:05:24 -05:00
504e494a4f
Bump version to 1.0.0 and prepare for release.
2015-11-11 21:03:37 +00:00
d73196ea11
Fix toggle buttons reverting to checkboxes after reboot.
...
This moves GUI specific code out of main and the individual tab js files
into gui.js, where it fits better.
2015-11-11 21:01:22 +00:00
b6b2812271
Fixing toggle buttons and the motors tab
2015-11-10 09:38:43 +01:00
1adc6f7bd6
Delete more unused files from libraries.
...
Note that this commit is indicating there needs to be a build step to
make it easier to generate the used sources when packaging the
configurator.
2015-11-10 00:26:50 +00:00
6d524ebe5e
Delete unused switchery files and relocate the modified switchery
...
distribution files.
Note that the switcher.css/.js are NOT the same as the minified version.
They have been modified to generate smaller switches.
2015-11-10 00:22:09 +00:00
8324a2c002
Fix repeated documentation link generation. Fixed repeated switchery
...
checkbox code.
2015-11-09 23:01:42 +00:00
1f4838c5e2
boards.js update
2015-11-09 22:29:02 +01:00
1816979cc4
More Work done:
...
• Tooltip integration
• Sensor Tab: rework
• Help & Documentation Tab: basic styling
• Logging Tab: basic styling
• PID Tab: some fixes
• Added the word „configurator (+ version)“ under the logo
• Removed not yet used „help icons“
2015-11-05 16:37:15 +01:00
8e79a250ed
Basic rework of: Adjustments and PID tabs, little fixes and changes here and there
2015-11-04 22:22:23 +01:00
80439ef4bd
Syncing
2015-11-03 07:21:25 +01:00
06f643812d
sync
2015-11-02 22:07:37 +01:00
53a615279d
fixing auto connect
2015-11-02 13:37:46 +01:00
d2be1715e5
Display header elements depending on connection state
2015-11-02 11:56:18 +01:00
77effe1963
Fixing some things in the configurator tab
...
and some media-query updates
2015-11-01 22:17:19 +01:00
24fe790df3
Added MotoLab to BOARD_DEFINITIONS
2015-10-31 18:10:01 -05:00
5c85ba7011
Merge commit '8e7097c' into development
2015-10-31 11:35:43 +00:00
afe62cc01b
Merge pull request #250 from tracernz/development
...
Enable flashing using USB-DFU protocol
2015-10-31 11:22:18 +00:00
716457b0ed
Merge branch 'development'
2015-10-31 11:18:51 +00:00
5d82bd8959
Prepare for release
2015-10-31 08:09:48 +00:00
29f38f38e0
Ports Tab rework
2015-10-30 20:30:27 +01:00
a618839f50
Some updates
2015-10-30 17:41:39 +01:00
54d7c24e82
First rework of Configuration Tab
...
… also minor fixes to switchery buttons
2015-10-30 09:46:53 +01:00
5782a83293
some minor changes
2015-10-29 17:15:48 +01:00
968e10feeb
switchery integration
2015-10-29 00:30:22 +01:00
9489b13c13
Ports tab clean up
2015-10-28 20:23:48 +01:00
819c07f2f5
Added sensor icons. Experimenting with theme change
2015-10-26 22:54:05 +01:00
d2c14f15ec
Added an new connect button
2015-10-23 22:57:55 +02:00
d15dbca994
fixing things…
2015-10-23 16:00:03 +02:00
87e9bfd3d9
...restoring some files
2015-10-23 15:42:32 +02:00
d61970e177
upload
2015-10-23 15:13:33 +02:00
3a9c7f3794
Merge remote-tracking branch 'origin/baseflight-configurator-development' into GUI-rework
...
Conflicts:
README.md
js/libraries/d3.min.js
js/msp.js
main.html
2015-10-23 14:41:08 +02:00
707e2c454b
More work done…
2015-10-22 22:27:48 +02:00
b0b8cc00d7
Further work and preparation.
...
Placed dataflash status bar in the header but can’t figure out how to
trigger a readout on connect in serial_backend.js. Some help?
2015-10-22 18:03:17 +02:00
1a20b317dd
DFU: Add additional error checks, enabled GUI connect lock while flashing
2015-10-15 13:00:43 +13:00
1e386f508b
DFU: Add local erase, 2 kB page size hardcoded
...
Not possible to read chip ID using DFU or page size info from USB descriptor (not yet supported by Chrome)
2015-10-15 13:00:43 +13:00
d89e9682c2
DFU: Make permissions compulsary, make DFU detection more robust
2015-10-15 13:00:43 +13:00
88a59f05c9
STM32DFU: Remove line missed in c038785
2015-10-15 12:59:44 +13:00
42a8d38e32
STM32: Check for DFU device after device reboot
2015-10-15 12:59:44 +13:00
8b029edbcf
Enable flashing using USB-DFU protocol
...
For new boards like Tornado
2015-10-15 12:59:44 +13:00
7bf70092d3
Fix backup, broken by a missed rename in 1cb6413.
2015-10-14 21:48:09 +01:00
43423ec7f9
Merge pull request #237 from sherlockflight/pid-rounding
...
Fix rounding of floating point values in crunch() (rc_rate, pids, etc)
2015-10-14 20:40:28 +01:00
eb2aa5b4e5
Allow configuration of servo angle at min/max from GUI.
...
Closes #193
2015-10-14 20:27:47 +01:00
d1396d8918
Merge pull request #224 from sherlockflight/msp-rx
...
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-10-14 20:09:10 +01:00
240bfbc442
Merge pull request #220 from ProDrone/handle_unsupported_msp_msg
...
Handle unsupported MSP messages
2015-10-14 20:02:22 +01:00
fb683c27a6
Bump three library to r72.
2015-10-02 22:48:29 +01:00
8317bcb607
Bump three library to r71.
2015-10-02 22:42:02 +01:00
70903b7639
Bump three library to r70.
2015-10-02 21:35:16 +01:00
aa5fe105c4
Bump d3 library.
2015-10-02 21:11:07 +01:00
ddeaceaf60
Bump jQuery libraries.
2015-10-02 21:01:35 +01:00
b698169d20
Prepare for release
2015-10-02 21:01:08 +01:00
e4f47f8153
- Target-unspecific VCP bugfix
2015-09-14 20:21:09 +08:00
ef0c637877
Add control sticks for MSP Rx, suitable for debugging CF without a Tx
2015-08-30 02:23:40 +12:00
fa3888a9d8
Fix rounding of floating point values in crunch() (rc_rate, pids, etc)
2015-08-20 12:14:33 +12:00
d22f3faf1d
* Add Colibri Race Support
2015-08-06 12:19:15 +08:00
717025cbde
Skip and log unsupported messages
2015-07-20 01:05:31 +02:00
56a209a1e8
Detect and register unsupported message error from FC
2015-07-20 01:05:19 +02:00
b1eb21cb78
Bump date.
2015-07-13 02:09:24 +01:00
687c0f1a84
Remove legacy servo configuration which originated from the overloaded
...
use of the servo 'rate'. All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00
1cb64130cc
update servo tab on configurator
...
1) work around 1.9.0 MSP buffer size bug.
2) support updated API for 1.12 (CF >= 1.10.0)
2015-07-13 00:02:58 +01:00
4e41f46523
First cut of support for custom airplane and tricopter on servos tab.
2015-06-28 23:19:03 +01:00
438dc8d46d
Some changes required for the 'custom-servo-mixers' cleanflight branch.
...
TODO - Support old version of MSP_SERVO_CONF
2015-06-28 22:30:36 +01:00
8d39b3f8cc
Fix handling of MSP_SERVO and MSP_MOTOR. Previously the code assumed
...
there was always 8 servos and 8 motors.
2015-06-01 11:02:09 +01:00
774fcf5f68
Merge commit '34e8c55a006ed3a2a989bf4e57c32bfa2e56f35b' into development
...
Conflicts:
js/msp.js
2015-05-25 23:43:52 +01:00
dec46c0d30
Update changelog and prepare for release
2015-05-23 15:03:45 +01:00
5707a12858
Fix for some incorrect data being left in the data structures after
...
connecting to two different firmware revisions.
This is a hack, the true fix should be to re-initialise the data
structures that are found in data_storage.js. See #197
2015-05-23 15:03:15 +01:00
322b7c1085
Fix access to `RC_YAW_EXPO` in `MSP_RC_TUNING` data packet
2015-05-22 21:37:04 +02:00
ab883c6dc5
Cleanup code indention and positioning the rc_yaw_expo field
2015-05-22 21:37:03 +02:00
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
3086a98828
Add support for manual baud rate selection to firmware flasher.
2015-05-22 02:29:29 +01:00
5471ab7f65
Add support for STM32 Extended Erase to allow erasing only needed pages.
2015-05-22 02:18:40 +01:00
2f6160d6a1
Merge branch 'eziosoft-master' into development
2015-05-22 00:27:38 +01:00
90cc08c86b
Test and cleanup STM32 extended erase bootloader command support.
...
Note: entire chip only for now - 'Full Chip Erase' checkbox is ignored.
2015-05-22 00:27:09 +01:00
2e6f5aa4d4
Prepare for release.
2015-05-20 15:37:28 +01:00
ef682cdca9
STM F3 support
...
Partial F3 support. Should be enough to flash correctly.
Currently only full chip erase is supported.
IT IS NOT TESTED AT ALL as I don't have hardware
2015-05-19 03:04:40 +02:00
d18e5a9559
Merge branch 'manual_comport_selection' of git://github.com/pulsar256/cleanflight-configurator into pulsar256-manual_comport_selection
2015-05-17 23:11:58 +01:00
cabeba70f7
checkbox to show dev releases, code refactoring
2015-05-17 23:01:27 +01:00
8913b8bb1c
handle setups with no non-bt serial ports - for real
2015-05-10 22:30:00 +02:00
21a75ea7d3
gui cosmetics, handle setups with no non-bt serial ports
2015-05-10 21:51:16 +02:00
1bb63a597b
manual port override as chrome won't enumerate bluetooth serial ports on linux
2015-05-10 14:37:31 +02:00
d10023ec4b
Update changelog and prepare for release.
2015-05-09 04:36:30 +01:00
0f95f4ec4c
Improve MSP handling of servo configuration. Fixes backup of CJMCU
...
boards.
2015-05-07 22:47:32 +01:00
244685c9a6
Update version checking code to use semantic versioning - see
...
http://semver.org/
semver.js creating using browserify.
https://www.brcdn.org/?module=semver&version=4.3.4
2015-05-07 22:10:26 +01:00
e781e14617
fix for undefined function
...
ArrayBuffer does NOT have length but byteLength parameter.
2015-04-28 10:20:48 +02:00
37a1c0d3e7
Update changelog and prepare for release.
2015-04-14 13:33:38 +01:00
bf353192ef
Avoid backing up invalid looptime/arming configuration for firmware with
...
api < 1.8
2015-04-14 13:29:44 +01:00
2398f10b62
Fix for restoring backups created with 0.63.0 for firmwares with api <
...
1.8.0 that were saved with incorrect looptime.
2015-04-14 13:25:45 +01:00
77d608063d
Prepare for release.
2015-03-29 16:18:54 +01:00
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
2e046db53e
Ensure offset variable is updated consistently in MSP_MISC.
...
See 9261163ca2
2015-03-29 12:06:33 +01:00
54c5d9b44c
Reworked msp.js - MSP_ARMING_CONFIG, MSP_SET_ARMING_CONFIG
2015-03-29 08:58:01 +11:00
e362130810
Reworked data_storage.js - ARMING_CONFIG
2015-03-29 08:45:08 +11:00
68dbf1707e
Merge pull request #11 from cleanflight/development
...
Sync to latest changes
2015-03-23 08:43:54 +11:00
52d7670977
Move apiVersion to appear before profiles in backup file.
2015-03-22 09:25:32 +00:00
2e5acfc1bd
Fix the 0.63.0 serial port configuration migration code.
2015-03-22 09:19:10 +00:00
a1f932f36a
Reworked msp.js - new code MSP_ARM_CONFIG etc
2015-03-18 14:46:24 +11:00
e5235e46e6
Code style check data_storage.js
2015-03-18 14:29:09 +11:00
ea78239cac
Reworked data_storage.js - ARM_CONFIG and LOOP_TIME
2015-03-18 14:24:50 +11:00
9261163ca2
Reworked msp.js
...
MISC.auto_disarm_delay, MISC.disarm_kill_switch are CONFIG.apiVersion dependent
2015-03-15 17:04:40 +11:00
fde8edfe1e
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:17:30 +11:00
fc656d4ac2
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:08:29 +11:00
2863077ee3
Merge remote-tracking branch 'upstream/development' into development
2015-03-14 10:19:24 +13:00
e462439c1b
Upgrade D3 library to 3.5.5.
...
See http://d3js.org/
2015-03-12 00:14:39 +00:00
8160e8e353
Merge branch 'development' of https://github.com/tricopterY/cleanflight-configurator into development
...
Conflicts:
js/msp.js
tabs/pid_tuning.html
tabs/pid_tuning.js
2015-03-12 00:40:15 +01:00
b2be2853b4
Provide a migration path from pre-1.8.0 firmware backups.
2015-03-11 23:34:24 +00:00
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
abbfe1d763
Update jquery.flightindicators.js
2015-03-11 16:57:50 +11:00
3ed04866f6
Update gui.js
2015-03-11 16:41:09 +11:00
97857b19d8
Update data_storage.js
2015-03-11 16:20:15 +11:00
f4fb947f8f
Update msp.js
2015-03-11 16:18:49 +11:00
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
8e6c5909c1
Merge pull request #4 from tricopterY/tricopterY-patch-1-3
...
Update data_storage.js
2015-03-10 16:10:12 +11:00
2b5296884a
Update msp.js
...
Added TPA Breakpoint handling via PID Tuning tab
2015-03-10 14:51:23 +11:00
3d921b9549
Update data_storage.js
...
Support for TPA Breakpoint via GUI
2015-03-10 14:35:00 +11:00
b331315b76
Add 250000 baudrate for blackbox
2015-03-07 13:07:32 +13:00
aa8d5300e5
Support new Blackbox baudrates including new 230400 rate
2015-03-06 19:58:57 +13:00
88a9699487
Drop support for old API and configuration backups. Additional code is
...
required to migrate and support pre 1.8.x serial port configuration.
This commit is just to limit user expectations until such code is
written.
2015-03-03 23:29:11 +00:00
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
c3f1c13d54
Move Documentation and Support links to separate tab. Add a
...
contributing section. Unify help/landing section CSS/html a little.
Expand the sponsors panel area in preparation for an updated section.
2015-03-03 16:27:40 +00:00
9ba21f773f
Fix servo channel forwarding configuration. Closes #117 .
...
Editor mishap during refactoring in
34d72feb69
2015-02-27 10:52:56 +00:00
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
289719b81a
Merge remote-tracking branch 'upstream/development' into development
2015-02-27 00:45:01 +13:00
7bdd010eb0
Avoid using GPS commands for targets that do not have GPS support
...
compiled in.
2015-02-23 21:27:55 +00:00
66e767881e
Fix endianness of board version read
2015-02-23 22:47:47 +13:00
831e4a848e
Merge branch 'blackbox-flash' of
...
https://github.com/sherlockflight/cleanflight-configurator-dev into
sherlockflight-blackbox-flash
Conflicts:
_locales/en/messages.json
2015-02-22 21:51:18 +00:00
31fd709351
Update changelog, bump verson and prepare for release.
2015-02-20 20:11:01 +00:00
f89aaa1011
Add flight instruments to setup tab
2015-02-20 01:18:49 +00:00
d0ae8dd921
Show "dataflash unsupported" for old versions missing new MSP commands
2015-02-16 19:13:09 +13:00
7fb9f43b00
Merge remote-tracking branch 'upstream/development' into blackbox-flash
2015-02-16 17:45:47 +13:00
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
34d72feb69
Move handling of servo channel forwarding into the MSP.
2015-02-10 01:12:26 +00:00
745c2dc793
Adding SP Racing F3 board.
2015-02-08 23:16:29 +00:00
6901aa2dbc
Cleanup serial port count code.
2015-02-08 23:16:17 +00:00
39be4d9e62
Update changelog and prepare for release.
2015-02-03 00:18:50 +00:00
cfe6949c84
Allow same rnage of values for board alignment as cli (-180 - 360)
2015-02-02 00:08:09 +00:00
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
e672dde6e2
Fix backup of PID controller.
2015-01-29 21:50:02 +01:00
c78bd800db
Fix MSP_GPS_SV_INFO comment
...
Depends on #437
2015-01-29 19:26:42 +01:00
e447739e74
Adjust documentation button so that it doesn't move the sensor
...
indicators when connected. Use same color as other help panels.
2015-01-29 19:01:37 +01:00
20a82e7339
Merge branch 'development' of https://github.com/pulsar256/cleanflight-configurator into pulsar256-development
2015-01-29 18:30:21 +01:00
e96839d3d8
Merge pull request #80 from ledvinap/feature-negative-current
...
Allow negative current draw
2015-01-29 18:29:01 +01:00
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
aaab850407
Change MSP_SONAR_ALTITUDE to be in the range used for cleanflight
...
original commands.
See
https://code.google.com/p/multiwii/source/browse/trunk/MultiWii_shared/Protocol.cpp#18
2015-01-29 15:29:12 +01:00
39c70ce9b8
Add sonar data storage
2015-01-28 22:28:19 +01:00
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
943d33ba4d
Allow negative current draw
...
Interpret MSP_ANALOG.amperage value as signed
2015-01-28 17:15:23 +01:00
d3fc8464fa
added a help button for the currently installed firmware
2015-01-28 00:01:42 +01:00
b3424eadcb
Defining the models and images used in one place to make maintainance of
...
the mixer list easier.
2015-01-27 21:06:39 +01:00
a56c0eef40
Fix welcome tab being cleared after failing to connect to a port.
2015-01-27 00:43:09 +01:00
34b7b87c3e
Allow old API version to be used but disable LED strip tab and
...
backup/restore functionality in certain cases. Cleanup of tab
switching.
2015-01-26 22:37:55 +01:00
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
d269d60391
Improve user experience by adding tabs for the welcome and firmware
...
flasher.
The welcome (aka 'landing') and firmware flasher were already modelled
as tabs but were never displayed as tabs.
The UI didn't make sense when the whether the welcome message or
firmware flasher was displayed since there was no active tab or other
indication.
2015-01-25 17:37:47 +01:00
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
6a11e44802
Bump minimum API version up - needs latest firmware for LED strip/ring
...
compatibility.
2015-01-23 02:26:19 +01:00
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
8c10f39606
Add support for backup and restore of led strip config.
...
Various minor code cleanups.
2015-01-19 20:41:41 +01:00
8870f9731d
Prepare for release 0.60.0.
2015-01-16 18:06:04 +00:00
f480e05027
Merge branch 'led-strip' into development
2015-01-16 17:24:13 +00:00
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
30ddc6ac83
replace motor order models with script generated varients
2015-01-10 19:17:23 +00:00
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
c5e2a13b6c
First cut of port of LED Strip configuration UI.
...
Thanks for the original code decompyler!
2015-01-08 21:46:43 +00:00
gael
Dominic Clifton
Michael Corcoran
NightHawk32
skaman82
tricopterY
ProDrone
Nicholas Sherlock
Kristjan Vaga
skaman82
Moto Moto
Larry (TBS)
borisbstyle
Bart
Paul Rogalinski
Mauro Mombelli
Richard Birkby
tracernz
Krzysztof Rosinski
Petr Ledvina
Marc Egli
Jonathan Hudson