From 48c8b86d37cb37080e4577a151a644e47df59ee2 Mon Sep 17 00:00:00 2001 From: Miguel Angel Mulero Martinez Date: Thu, 31 May 2018 15:28:01 +0200 Subject: [PATCH] Update vbat pid compensation tooltip text --- locales/en/messages.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/locales/en/messages.json b/locales/en/messages.json index 47f1ac89..00c1796a 100644 --- a/locales/en/messages.json +++ b/locales/en/messages.json @@ -2688,7 +2688,7 @@ "message": "Vbat PID Compensation" }, "pidTuningVbatPidCompensationHelp": { - "message": "Increases the PID values to compensate when Vbat gets lower. This will give more constant flight characteristics throughout the flight. The amount of compensation that is applied is calculated from Maximum Cell Voltage set in Configuration page, so make sure that is set to something appropriate." + "message": "Increases the PID values to compensate when Vbat gets lower. This will give more constant flight characteristics throughout the flight. The amount of compensation that is applied is calculated from the $t(powerBatteryMaximum.message) set in the $t(tabPower.message) page, so make sure that is set to something appropriate." }, "configHelp2": { "message": "Arbitrary board rotation in degrees, to allow mounting it sideways / upside down / rotated etc. When running external sensors, use the sensor alignments (Gyro, Acc, Mag) to define sensor position independent from board orientation. "