From 7d690d32901fd7f6a34df48d22ad86dbfaab3868 Mon Sep 17 00:00:00 2001 From: Mark Haslinghuis Date: Mon, 6 Feb 2023 15:35:22 +0100 Subject: [PATCH] Found two more links (#3312) --- locales/en/messages.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locales/en/messages.json b/locales/en/messages.json index 7a408bd8..ca60a8b9 100644 --- a/locales/en/messages.json +++ b/locales/en/messages.json @@ -686,7 +686,7 @@ "message": "Contributing" }, "defaultContributingText": { - "message": "If you would like to help make Betaflight even better you can help in many ways, including:
" + "message": "If you would like to help make Betaflight even better you can help in many ways, including:
" }, "defaultFacebookText": { "message": "We also have a Facebook Group.
Join us to get a place to talk about Betaflight, ask configuration questions, or just hang out with fellow pilots." @@ -2052,7 +2052,7 @@ "message": "Pid Tuning Slider Mode

Pidtuning slider mode can be:

• OFF - no sliders, enter values manually
• RP - sliders control Roll and Pitch only, enter Yaw values manually
• RPY - sliders control all PID values

Warning:Going from RP to RPY mode will overwrite Yaw settings with firmware settings." }, "receiverHelp": { - "message": "• Always check that your Failsafe is working properly! The settings are in the Failsafe tab, which requires Expert Mode.
• Use the latest Tx firmware!
• Disable the hardware ADC filter in the Transmitter if using OpenTx or EdgeTx.
Basic Setup: Configure the 'Receiver' settings correctly. Choose the correct ‘Channel Map’ for your radio. Check that the Roll, Pitch and other bar graphs move correctly. Adjust the channel endpoint or range values in the transmitter to ~1000 to ~2000, and set the midpoint to 1500. For more information, read the documentation." + "message": "• Always check that your Failsafe is working properly! The settings are in the Failsafe tab, which requires Expert Mode.
• Use the latest Tx firmware!
• Disable the hardware ADC filter in the Transmitter if using OpenTx or EdgeTx.
Basic Setup: Configure the 'Receiver' settings correctly. Choose the correct ‘Channel Map’ for your radio. Check that the Roll, Pitch and other bar graphs move correctly. Adjust the channel endpoint or range values in the transmitter to ~1000 to ~2000, and set the midpoint to 1500. For more information, read the documentation." }, "receiverThrottleMid": { "message": "Throttle MID"