Merge pull request #10 from cleanflight/development

Development

_locales/en/messages.json

@@ -518,6 +518,9 @@
     "portsHelp": {
         "message": "Configure serial ports.  <strong>Note:</strong> not all combinations are valid.  When the flight controller firmware detects this the serial port configuration will be reset."
     },
+    "portsFirmwareUpgradeRequired": {
+        "message": "Firmware upgrade <span style=\"color: red\">required</span>.  Serial port configurations of firmware &lt; 1.8.0 is not supported."
+    },
     "portsButtonSave": {
         "message": "Save and Reboot"
     },
@@ -567,6 +570,12 @@
     "pidTuningRollPitchRate": {
         "message": "ROLL &amp; PITCH rate"
     },
+    "pidTuningRollRate": {
+        "message": "ROLL rate"
+    },
+    "pidTuningPitchRate": {
+        "message": "PITCH rate"
+    },
     "pidTuningYawRate": {
         "message": "YAW rate"
     },
@@ -893,6 +902,9 @@
     "dataflashNotSupportedNote": {
         "message": "Your flight controller does not have a compatible dataflash chip available."
     },
+    "dataflashFirmwareUpgradeRequired": {
+        "message": "Dataflash requires firmware &gt;= 1.8.0."
+    },
     "dataflashButtonSaveFile": {
         "message": "Save flash to file..."
     },

changelog.html

@@ -3,9 +3,6 @@
     - PID Tuning tab allows TPA Breakpoint changes - Requires 1.8.0 firmware.<br />
     - Corrected Artificial Horizon Pitch/Roll views.<br />
     - Changed logging time stamp to include date stamp.<br />
-</p>
-<span>2015.03.03 - 0.63 - cleanflight</span>
-<p>
     - Support new firmware 1.8 serial port configuration.<br />
     - Move documentation and help to new tab.<br />
     - Add contributing section to welcome tab.<br />

js/backup_restore.js

@@ -102,7 +102,7 @@ function configuration_backup(callback) {
                 configuration.RCMAP = jQuery.extend(true, [], RC_MAP);
                 configuration.BF_CONFIG = jQuery.extend(true, {}, BF_CONFIG);
                 configuration.SERIAL_CONFIG = jQuery.extend(true, {}, SERIAL_CONFIG);
-                configuration.LED_STRIP = jQuery.extend(true, {}, LED_STRIP);
+                configuration.LED_STRIP = jQuery.extend(true, [], LED_STRIP);
 
                 save();
             }
@@ -330,6 +330,77 @@ function configuration_restore(callback) {
             appliedMigrationsCount++;
         }
 
+        if (!compareVersions(migratedVersion, '0.63.0')) {
+            
+            // LED Strip was saved as object instead of array.
+            if (typeof(configuration.LED_STRIP) == 'object') {
+                var fixed_led_strip = [];
+
+                var index = 0;
+                while (configuration.LED_STRIP[index]) {
+                    fixed_led_strip.push(configuration.LED_STRIP[index++]);
+                }
+                configuration.LED_STRIP = fixed_led_strip;
+            }
+
+            
+            // Serial configuation redesigned
+            var ports = [];
+            for (var portIndex = 0; portIndex < configuration.SERIAL_CONFIG.ports.length; portIndex++) {
+                var oldPort = configuration.SERIAL_CONFIG.ports[portIndex];
+
+                var newPort = {
+                    identifier: oldPort.identifier,
+                    functionMask: 0,
+                    msp_baudrate: configuration.SERIAL_CONFIG.mspBaudRate,
+                    gps_baudrate: configuration.SERIAL_CONFIG.gpsBaudRate,
+                    telemetry_baudrate: 0, // auto
+                    blackbox_baudrate: 5, // 115200
+                };
+                
+                switch(oldPort.scenario) {
+                    case 1: // MSP, CLI, TELEMETRY, SMARTPORT TELEMETRY, GPS-PASSTHROUGH
+                    case 5: // MSP, CLI, GPS-PASSTHROUGH
+                    case 8: // MSP ONLY
+                        newPort.functionMask = 1; // FUCNTION_MSP
+                    break;
+                    case 2: // GPS 
+                        newPort.functionMask = 2; // FUNCTION_GPS
+                    break;
+                    case 3: // RX_SERIAL 
+                        newPort.functionMask = 64; // FUNCTION_RX_SERIAL
+                    break;
+                    case 10: // BLACKBOX ONLY
+                        newPort.functionMask = 128; // FUNCTION_BLACKBOX
+                    break;
+                    case 11: // MSP, CLI, BLACKBOX, GPS-PASSTHROUGH
+                        newPort.functionMask = 1 + 128; // FUNCTION_BLACKBOX
+                    break;
+                }
+                
+                ports.push(newPort);
+            }
+            configuration.SERIAL_CONFIG = { 
+                ports: ports 
+            };
+            
+            for (var profileIndex = 0; profileIndex < 3; profileIndex++) {
+                var RC = configuration.profiles[profileIndex].RC;
+                // TPA breakpoint was added
+                if (!RC.dynamic_THR_breakpoint) {
+                    RC.dynamic_THR_breakpoint = 1500; // firmware default
+                }
+                
+                // Roll and pitch rates were split
+                RC.roll_rate = RC.roll_pitch_rate;
+                RC.pitch_rate = RC.roll_pitch_rate;
+            }
+            
+            migratedVersion = '0.63.0';
+            GUI.log(chrome.i18n.getMessage('configMigratedTo', [migratedVersion]));
+            appliedMigrationsCount++;
+        }
+
         GUI.log(chrome.i18n.getMessage('configMigrationSuccessful', [appliedMigrationsCount]));
         return true;
     }

js/data_storage.js

@@ -3,9 +3,9 @@
 var CONFIGURATOR = {
     'releaseDate': 1424462791805, // new Date().getTime() - 2015.02.20
     'apiVersionAccepted': 1.2,
-    'backupRestoreMinApiVersionAccepted': 1.6,
+    'backupRestoreMinApiVersionAccepted': 1.5,
     'pidControllerChangeMinApiVersion': 1.5,
-    'backupFileMinVersionAccepted': '0.63', // chrome.runtime.getManifest().version is stored as string, so does this one
+    'backupFileMinVersionAccepted': '0.55', // chrome.runtime.getManifest().version is stored as string, so does this one
     'connectionValid': false,
     'connectionValidCliOnly': false,
     'cliActive': false,
@@ -65,7 +65,9 @@ var RC = {
 var RC_tuning = {
     RC_RATE:         0,
     RC_EXPO:         0,
-    roll_pitch_rate: 0,
+    roll_pitch_rate: 0, // pre 1.7 api only
+    roll_rate:       0, 
+    pitch_rate:      0,
     yaw_rate:        0,
     dynamic_THR_PID: 0,
     throttle_MID:    0,
@@ -87,6 +89,8 @@ var SERVO_CONFIG = [];
 
 var SERIAL_CONFIG = {
     ports: [],
+    
+    // pre 1.6 settings
     mspBaudRate: 0,
     gpsBaudRate: 0,
     gpsPassthroughBaudRate: 0,

js/msp.js

@@ -108,7 +108,9 @@ var MSP = {
         '19200',
         '38400',
         '57600',
-        '115200'
+        '115200',
+        '230400',
+        '250000',
     ],
     
     serialPortFunctions: // in LSB bit order 
@@ -288,14 +290,22 @@ var MSP = {
                 ANALOG.amperage = data.getInt16(5, 1) / 100; // A
                 break;
             case MSP_codes.MSP_RC_TUNING:
-                RC_tuning.RC_RATE = parseFloat((data.getUint8(0) / 100).toFixed(2));
+                var offset = 0;
-                RC_tuning.RC_EXPO = parseFloat((data.getUint8(1) / 100).toFixed(2));
+                RC_tuning.RC_RATE = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
-                RC_tuning.roll_pitch_rate = parseFloat((data.getUint8(2) / 100).toFixed(2));
+                RC_tuning.RC_EXPO = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
-                RC_tuning.yaw_rate = parseFloat((data.getUint8(3) / 100).toFixed(2));
+                if (CONFIG.apiVersion < 1.7) {
-                RC_tuning.dynamic_THR_PID = parseFloat((data.getUint8(4) / 100).toFixed(2));
+                    RC_tuning.roll_pitch_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
-                RC_tuning.throttle_MID = parseFloat((data.getUint8(5) / 100).toFixed(2));
+                } else {
-                RC_tuning.throttle_EXPO = parseFloat((data.getUint8(6) / 100).toFixed(2));
+                    RC_tuning.roll_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
-                RC_tuning.dynamic_THR_breakpoint = parseInt(data.getUint16(7, 1));
+                    RC_tuning.pitch_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
+                }
+                RC_tuning.yaw_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
+                RC_tuning.dynamic_THR_PID = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
+                RC_tuning.throttle_MID = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
+                RC_tuning.throttle_EXPO = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
+                if (CONFIG.apiVersion >= 1.7) {
+                    RC_tuning.dynamic_THR_breakpoint = data.getUint16(offset++, 1);
+                }
                 break;
             case MSP_codes.MSP_PID:
                 // PID data arrived, we need to scale it and save to appropriate bank / array
@@ -913,13 +923,20 @@ MSP.crunch = function (code) {
         case MSP_codes.MSP_SET_RC_TUNING:
             buffer.push(parseInt(RC_tuning.RC_RATE * 100));
             buffer.push(parseInt(RC_tuning.RC_EXPO * 100));
+            if (CONFIG.apiVersion < 1.7) {
                 buffer.push(parseInt(RC_tuning.roll_pitch_rate * 100));
+            } else {
+                buffer.push(parseInt(RC_tuning.roll_rate * 100));
+                buffer.push(parseInt(RC_tuning.pitch_rate * 100));
+            }
             buffer.push(parseInt(RC_tuning.yaw_rate * 100));
             buffer.push(parseInt(RC_tuning.dynamic_THR_PID * 100));
             buffer.push(parseInt(RC_tuning.throttle_MID * 100));
             buffer.push(parseInt(RC_tuning.throttle_EXPO * 100));
+            if (CONFIG.apiVersion >= 1.7) {
                 buffer.push(lowByte(RC_tuning.dynamic_THR_breakpoint));
                 buffer.push(highByte(RC_tuning.dynamic_THR_breakpoint));
+            }
             break;
         // Disabled, cleanflight does not use MSP_SET_BOX.
         /*

tabs/dataflash.html

@@ -62,6 +62,6 @@
             <a href="#" class="save-flash" i18n="dataflashButtonSaveFile"></a>
         </div>
     </div>
-    <div class="note require-no-dataflash" i18n="dataflashNotSupportedNote">
+    <div class="note require-no-dataflash">
     </div>
 </div>

tabs/dataflash.js

@@ -1,6 +1,8 @@
 'use strict';
 
-TABS.dataflash = {};
+TABS.dataflash = {
+    available: false
+};
 TABS.dataflash.initialize = function (callback) {
     var 
         self = this,
@@ -18,11 +20,20 @@ TABS.dataflash.initialize = function (callback) {
         log_buffer = [];
 
     if (CONFIGURATOR.connectionValid) {
-        MSP.send_message(MSP_codes.MSP_DATAFLASH_SUMMARY, false, false, function() {
+        TABS.dataflash.available = (CONFIG.apiVersion >= 1.6)
+        
+        if (!TABS.dataflash.available) {
+            load_html();
+            return;
+        }
+        
+        MSP.send_message(MSP_codes.MSP_DATAFLASH_SUMMARY, false, false, load_html);
+    }
+    
+    function load_html() {
         $('#content').load("./tabs/dataflash.html", function() {
             create_html();
         });
-        });
     }
     
     function formatFilesize(bytes) {
@@ -71,12 +82,13 @@ TABS.dataflash.initialize = function (callback) {
     }
     
     function create_html() {
-        var
-            supportsDataflash = DATAFLASH.totalSize > 0;
         
         // translate to user-selected language
         localize();
        
+        if (TABS.dataflash.available) {
+            var supportsDataflash = DATAFLASH.totalSize > 0;
+            
             $(".tab-dataflash").toggleClass("supported", supportsDataflash);
 
             if (supportsDataflash) {
@@ -91,7 +103,14 @@ TABS.dataflash.initialize = function (callback) {
                 $('.tab-dataflash a.save-flash-dismiss').click(dismiss_saving_dialog);
                 
                 update_html();
+            } else {
+                $(".tab-dataflash .note").html(chrome.i18n.getMessage('dataflashNotSupportedNote'));
             }
+        } else {
+            $(".tab-dataflash").removeClass("supported");
+            $(".tab-dataflash .note").html(chrome.i18n.getMessage('dataflashFirmwareUpgradeRequired'));
+        }
+
         
         if (callback) callback();
     }

tabs/pid_tuning.html

@@ -12,7 +12,6 @@
         </select>
     </div>
     <div class="clear-both"></div>
-
     <form name="pid-tuning" id="pid-tuning">
         <table class="pid_tuning">
             <tr>
@@ -80,21 +79,28 @@
             </tr>
         </table>
         <table class="rate-tpa">
+            <thead>
                 <tr>
-                <th i18n="pidTuningRollPitchRate"></th>
+                    <th class="roll-pitch" i18n="pidTuningRollPitchRate"></th>
+                    <th class="roll" i18n="pidTuningRollRate"></th>
+                    <th class="pitch" i18n="pidTuningPitchRate"></th>
                     <th i18n="pidTuningYawRate"></th>
                     <th i18n="pidTuningTPA"></th>
-                <th i18n="pidTuningTPABreakPoint" class="tpa"></th>
+                    <th class="tpa-breakpoint" i18n="pidTuningTPABreakPoint"></th>
                 </tr>
+            </thead>
+            <tbody>
                 <tr>
-                <td><input type="number" name="roll-pitch" step="0.01" min="0" max="2.55"/></td>
+                    <td class="roll-pitch" ><input type="number" name="roll-pitch" step="0.01" min="0" max="2.55"/></td>
+                    <td class="roll" ><input type="number" name="roll" step="0.01" min="0" max="2.55"/></td>
+                    <td class="pitch" ><input type="number" name="pitch" step="0.01" min="0" max="2.55"/></td>
                     <td><input type="number" name="yaw" step="0.01" min="0" max="2.55"/></td>
                     <td><input type="number" name="tpa" step="0.01" min="0" max="2.55"/></td>
-                <td><input type="number" name="tpa-breakpoint" step="10" min="1000" max="2000" /></td>
+                    <td class="tpa-breakpoint"><input type="number" name="tpa-breakpoint" step="10" min="1000" max="2000" /></td>
                 </tr>
+            </tbody>
         </table>
     </form>
-
     <div class="clear-both"></div>
     <div class="profile">
         <span class="head" i18n="pidTuningProfileHead"></span>

tabs/pid_tuning.js

@@ -39,8 +39,8 @@ TABS.pid_tuning.initialize = function (callback) {
     // requesting MSP_STATUS manually because it contains CONFIG.profile
     MSP.send_message(MSP_codes.MSP_STATUS, false, false, get_pid_controller);
 
-    function data_stoarage_to_form() {
+    function pid_and_rc_to_form() {
-// Fill in the data from PIDs array
+        // Fill in the data from PIDs array
         var i = 0;
         $('.pid_tuning .ROLL input').each(function () {
             switch (i) {
@@ -173,13 +173,15 @@ TABS.pid_tuning.initialize = function (callback) {
 
         // Fill in data from RC_tuning object
         $('.rate-tpa input[name="roll-pitch"]').val(RC_tuning.roll_pitch_rate.toFixed(2));
+        $('.rate-tpa input[name="roll"]').val(RC_tuning.roll_rate.toFixed(2));
+        $('.rate-tpa input[name="pitch"]').val(RC_tuning.pitch_rate.toFixed(2));
         $('.rate-tpa input[name="yaw"]').val(RC_tuning.yaw_rate.toFixed(2));
         $('.rate-tpa input[name="tpa"]').val(RC_tuning.dynamic_THR_PID.toFixed(2));
         $('.rate-tpa input[name="tpa-breakpoint"]').val(RC_tuning.dynamic_THR_breakpoint);
     }
 
     function form_to_pid_and_rc() {
-// Catch all the changes and stuff the inside PIDs array
+        // Catch all the changes and stuff the inside PIDs array
         var i = 0;
         $('table.pid_tuning tr.ROLL input').each(function () {
             PIDs[0][i++] = parseFloat($(this).val());
@@ -232,6 +234,8 @@ TABS.pid_tuning.initialize = function (callback) {
 
         // catch RC_tuning changes
         RC_tuning.roll_pitch_rate = parseFloat($('.rate-tpa input[name="roll-pitch"]').val());
+        RC_tuning.roll_rate = parseFloat($('.rate-tpa input[name="roll"]').val());
+        RC_tuning.pitch_rate = parseFloat($('.rate-tpa input[name="pitch"]').val());
         RC_tuning.yaw_rate = parseFloat($('.rate-tpa input[name="yaw"]').val());
         RC_tuning.dynamic_THR_PID = parseFloat($('.rate-tpa input[name="tpa"]').val());
         RC_tuning.dynamic_THR_breakpoint = parseInt($('.rate-tpa input[name="tpa-breakpoint"]').val());
@@ -254,7 +258,7 @@ TABS.pid_tuning.initialize = function (callback) {
         $('.pid_tuning tr:eq(9) td:first').text(PID_names[7]);
         $('.pid_tuning tr:eq(10) td:first').text(PID_names[8]);
 
-        data_stoarage_to_form();
+        pid_and_rc_to_form();
 
         var pidController_e = $('select[name="controller"]');
         var profile_e = $('select[name="profile"]');
@@ -271,6 +275,14 @@ TABS.pid_tuning.initialize = function (callback) {
             pidController_e.prop('disabled', true);
         }
         
+        if (CONFIG.apiVersion < 1.7) {
+            $('.rate-tpa .tpa-breakpoint').hide();
+            $('.rate-tpa .roll').hide();
+            $('.rate-tpa .pitch').hide();
+        } else {
+            $('.rate-tpa .roll-pitch').hide();
+        }
+
         // Fill in currently selected profile
 
         profile_e.val(CONFIG.profile);
@@ -313,11 +325,12 @@ TABS.pid_tuning.initialize = function (callback) {
 
         // update == save.
         $('a.update').click(function () {
-
             form_to_pid_and_rc();
 
             function send_pids() {
-                if (!TABS.pid_tuning.controllerChanged) MSP.send_message(MSP_codes.MSP_SET_PID, MSP.crunch(MSP_codes.MSP_SET_PID), false, send_rc_tuning_changes);
+                if (!TABS.pid_tuning.controllerChanged) {
+                    MSP.send_message(MSP_codes.MSP_SET_PID, MSP.crunch(MSP_codes.MSP_SET_PID), false, send_rc_tuning_changes);
+                }
             }
 
             function send_rc_tuning_changes() {
@@ -348,10 +361,14 @@ TABS.pid_tuning.initialize = function (callback) {
             MSP.send_message(MSP_codes.MSP_STATUS);
         }, 250, true);
 
-        if (callback) callback();
+        if (callback) {
+            callback();
+        }
     }
 };
 
 TABS.pid_tuning.cleanup = function (callback) {
-    if (callback) callback();
+    if (callback) {
+        callback();
+    }
 };

tabs/ports.css

@@ -65,3 +65,21 @@
 .tab-ports .save:hover {
     background-color: #dedcdc;
 }
+
+.tab-ports .note {
+    padding: 5px;
+    border: 1px dashed silver;
+    margin-bottom: 8px;
+}
+.require-support {
+    display:none;
+}
+.tab-ports.supported .require-support {
+    display:block;
+}
+.require-upgrade {
+    display:block;
+}
+.tab-ports.supported .require-upgrade {
+    display:none;
+}

tabs/ports.html

@@ -1,5 +1,6 @@
 <div id="content-watermark"></div>
 <div class="tab-ports">
+    <div class="require-support">
         <div class="help">
             <p i18n="portsHelp"></p>
         </div>
@@ -21,6 +22,9 @@
         <div class="buttons">
             <a class="save" href="#" i18n="portsButtonSave"></a>
         </div>
+    </div>
+    <div class="note require-upgrade" i18n="portsFirmwareUpgradeRequired">
+    </div>
 </div>
 
 <div id="tab-ports-templates">

tabs/ports.js

@@ -48,7 +48,12 @@ TABS.ports.initialize = function (callback, scrollPosition) {
     ];
 
     var blackboxBaudRates = [
-       '115200'
+        '19200',
+        '38400',
+        '57600',
+        '115200',
+        '230400',
+        '250000',
     ];
 
     var columns = ['data', 'logging', 'gps', 'telemetry', 'rx'];
@@ -75,6 +80,13 @@ TABS.ports.initialize = function (callback, scrollPosition) {
 
     function update_ui() {
         
+        if (CONFIG.apiVersion < 1.6) {
+            
+            $(".tab-ports").removeClass("supported");
+            return;
+        }
+        
+        $(".tab-ports").addClass("supported");
         
         var portIdentifierToNameMapping = {
            0: 'UART1',