sundowndev
/
betaflight-configurator
mirror of https://github.com/sundowndev/betaflight-configurator.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

change the dead link for the USB Flashing

10.3.x-maintenance
jodyvanden 2017-11-28 15:34:12 +11:00
parent ad4517c0fa
commit 2333808618
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
_locales/en/messages.json
View File

@ -1779,7 +1779,7 @@
"message": "<strong>Recovery / Lost communication<strong>"
},
"firmwareFlasherRecoveryText": {
"message": "If you have lost communication with your board follow these steps to restore communication: <ul><li>Power off</li><li>Enable 'No reboot sequence', enable 'Full chip erase'.</li><li>Jumper the BOOT pins or hold BOOT button.</li><li>Power on (activity LED will NOT flash if done correctly).</li><li>Install all STM32 drivers and Zadig if required (see <a href=\"https://github.com/Betaflight/Betaflight/blob/master/docs/USB%20Flashing.md\"target=\"_blank\">USB Flashing</a> section of Betaflight manual).</li><li>Close configurator, Close all running chrome instances, Close all Chrome apps, Restart Configurator.</li><li>Release BOOT button if your FC has one.</li><li>Flash with correct firmware (using manual baud rate if specified in your FC's manual).</li><li>Power off.</li><li>Remove BOOT jumper.</li><li>Power on (activity LED should flash).</li><li>Connect normally.</li></ul>"
"message": "If you have lost communication with your board follow these steps to restore communication: <ul><li>Power off</li><li>Enable 'No reboot sequence', enable 'Full chip erase'.</li><li>Jumper the BOOT pins or hold BOOT button.</li><li>Power on (activity LED will NOT flash if done correctly).</li><li>Install all STM32 drivers and Zadig if required (see <a href=\"https://github.com/betaflight/betaflight/wiki/Installing-Betaflight\"target=\"_blank\">USB Flashing</a> section of Betaflight manual).</li><li>Close configurator, Close all running chrome instances, Close all Chrome apps, Restart Configurator.</li><li>Release BOOT button if your FC has one.</li><li>Flash with correct firmware (using manual baud rate if specified in your FC's manual).</li><li>Power off.</li><li>Remove BOOT jumper.</li><li>Power on (activity LED should flash).</li><li>Connect normally.</li></ul>"
},
"firmwareFlasherButtonLeave": {
"message": "Leave Firmware Flasher"