# rbreadline.rb -- a general facility for reading lines of input # with emacs style editing and completion. # # Inspired by GNU Readline, translation to Ruby # Copyright (C) 2009 by Park Heesob phasis@gmail.com # =begin Copyright (c) 2009, Park Heesob All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Park Heesob nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. =end class Fixnum def ord; self; end end module RbReadline require 'etc' RL_LIBRARY_VERSION = "5.2" RL_READLINE_VERSION = 0x0502 RB_READLINE_VERSION = "0.2.2" EOF = "\xFF" ESC = "\C-[" PAGE = "\C-L" SPACE = "\x20" RETURN = "\C-M" ABORT_CHAR = "\C-G" TAB = "\t" RUBOUT = "\x7f" NEWLINE = "\n" DEFAULT_BUFFER_SIZE = 256 DEFAULT_MAX_KILLS = 10 MB_FIND_NONZERO = 1 MB_FIND_ANY = 0 MB_LEN_MAX = 4 DEFAULT_INPUTRC = "~/.inputrc" SYS_INPUTRC = "/etc/inputrc" UpCase = 1 DownCase = 2 CapCase = 3 # Possible history errors passed to hist_error. EVENT_NOT_FOUND = 0 BAD_WORD_SPEC = 1 SUBST_FAILED = 2 BAD_MODIFIER = 3 NO_PREV_SUBST = 4 # Possible definitions for history starting point specification. ANCHORED_SEARCH = 1 NON_ANCHORED_SEARCH = 0 # Possible definitions for what style of writing the history file we want. HISTORY_APPEND = 0 HISTORY_OVERWRITE = 1 # Input error; can be returned by (*rl_getc_function) if readline is reading # a top-level command (RL_ISSTATE (RL_STATE_READCMD)). READERR = 0xFE.chr # Definitions available for use by readline clients. RL_PROMPT_START_IGNORE = 1.chr RL_PROMPT_END_IGNORE = 2.chr # Possible values for do_replace argument to rl_filename_quoting_function, # called by rl_complete_internal. NO_MATCH = 0 SINGLE_MATCH = 1 MULT_MATCH = 2 # Callback data for reading numeric arguments NUM_SAWMINUS = 0x01 NUM_SAWDIGITS = 0x02 NUM_READONE = 0x04 # A context for reading key sequences longer than a single character when # using the callback interface. KSEQ_DISPATCHED = 0x01 KSEQ_SUBSEQ = 0x02 KSEQ_RECURSIVE = 0x04 # Possible state values for rl_readline_state RL_STATE_NONE = 0x000000 # no state before first call RL_STATE_INITIALIZING = 0x000001 # initializing RL_STATE_INITIALIZED = 0x000002 # initialization done RL_STATE_TERMPREPPED = 0x000004 # terminal is prepped RL_STATE_READCMD = 0x000008 # reading a command key RL_STATE_METANEXT = 0x000010 # reading input after ESC RL_STATE_DISPATCHING = 0x000020 # dispatching to a command RL_STATE_MOREINPUT = 0x000040 # reading more input in a command function RL_STATE_ISEARCH = 0x000080 # doing incremental search RL_STATE_NSEARCH = 0x000100 # doing non-inc search RL_STATE_SEARCH = 0x000200 # doing a history search RL_STATE_NUMERICARG = 0x000400 # reading numeric argument RL_STATE_MACROINPUT = 0x000800 # getting input from a macro RL_STATE_MACRODEF = 0x001000 # defining keyboard macro RL_STATE_OVERWRITE = 0x002000 # overwrite mode RL_STATE_COMPLETING = 0x004000 # doing completion RL_STATE_SIGHANDLER = 0x008000 # in readline sighandler RL_STATE_UNDOING = 0x010000 # doing an undo RL_STATE_INPUTPENDING = 0x020000 # rl_execute_next called RL_STATE_TTYCSAVED = 0x040000 # tty special chars saved RL_STATE_CALLBACK = 0x080000 # using the callback interface RL_STATE_VIMOTION = 0x100000 # reading vi motion arg RL_STATE_MULTIKEY = 0x200000 # reading multiple-key command RL_STATE_VICMDONCE = 0x400000 # entered vi command mode at least once RL_STATE_DONE = 0x800000 # done accepted line NO_BELL = 0 AUDIBLE_BELL = 1 VISIBLE_BELL = 2 # The actions that undo knows how to undo. Notice that UNDO_DELETE means # to insert some text, and UNDO_INSERT means to delete some text. I.e., # the code tells undo what to undo, not how to undo it. UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END = 0,1,2,3 # Definitions used when searching the line for characters. # NOTE: it is necessary that opposite directions are inverses FTO = 1 # forward to BTO = -1 # backward to FFIND = 2 # forward find BFIND = -2 # backward find # Possible values for the found_quote flags word used by the completion # functions. It says what kind of (shell-like) quoting we found anywhere # in the line. RL_QF_SINGLE_QUOTE = 0x01 RL_QF_DOUBLE_QUOTE = 0x02 RL_QF_BACKSLASH = 0x04 RL_QF_OTHER_QUOTE = 0x08 KEYMAP_SIZE = 257 ANYOTHERKEY = KEYMAP_SIZE-1 @hConsoleHandle = nil @MessageBeep = nil RL_IM_INSERT = 1 RL_IM_OVERWRITE = 0 RL_IM_DEFAULT = RL_IM_INSERT @no_mode = -1 @vi_mode = 0 @emacs_mode = 1 ISFUNC = 0 ISKMAP = 1 ISMACR = 2 HISTORY_WORD_DELIMITERS = " \t\n;&()|<>" HISTORY_QUOTE_CHARACTERS = "\"'`" RL_SEARCH_ISEARCH = 0x01 # incremental search RL_SEARCH_NSEARCH = 0x02 # non-incremental search RL_SEARCH_CSEARCH = 0x04 # intra-line char search # search flags SF_REVERSE = 0x01 SF_FOUND = 0x02 SF_FAILED = 0x04 @slashify_in_quotes = "\\`\"$" @sigint_proc = nil @sigint_blocked = false @rl_prep_term_function = :rl_prep_terminal @rl_deprep_term_function = :rl_deprep_terminal @_rl_history_saved_point = -1 @rl_max_kills = DEFAULT_MAX_KILLS @rl_kill_ring = nil @rl_kill_index = 0 @rl_kill_ring_length = 0 @pending_bytes = '' @stored_count = 0 @_rl_isearch_terminators = nil @_rl_iscxt = nil @last_isearch_string = nil @last_isearch_string_len = 0 @default_isearch_terminators = "\033\012" @_rl_history_preserve_point = false @terminal_prepped = false @otio = nil @msg_saved_prompt = false @_rl_nscxt = nil @noninc_search_string = nil @noninc_history_pos = 0 @prev_line_found = nil rl_history_search_len = 0 rl_history_search_pos = 0 history_search_string = nil history_string_size = 0 @_rl_tty_chars = Struct.new(:t_eol,:t_eol2,:t_erase,:t_werase,:t_kill,:t_reprint,:t_intr,:t_eof, :t_quit,:t_susp,:t_dsusp,:t_start,:t_stop,:t_lnext,:t_flush,:t_status).new @_rl_last_tty_chars = nil @_keyboard_input_timeout = 0.01 # Variables exported by this file. # The character that represents the start of a history expansion # request. This is usually `!'. @history_expansion_char = "!" # The character that invokes word substitution if found at the start of # a line. This is usually `^'. @history_subst_char = "^" # During tokenization, if this character is seen as the first character # of a word, then it, and all subsequent characters upto a newline are # ignored. For a Bourne shell, this should be '#'. Bash special cases # the interactive comment character to not be a comment delimiter. @history_comment_char = 0.chr # The list of characters which inhibit the expansion of text if found # immediately following history_expansion_char. @history_no_expand_chars = " \t\n\r=" # If set to a non-zero value, single quotes inhibit history expansion. # The default is 0. @history_quotes_inhibit_expansion = 0 # Used to split words by history_tokenize_internal. @history_word_delimiters = HISTORY_WORD_DELIMITERS # If set, this points to a function that is called to verify that a # particular history expansion should be performed. @history_inhibit_expansion_function = nil @rl_event_hook = nil # The visible cursor position. If you print some text, adjust this. # NOTE: _rl_last_c_pos is used as a buffer index when not in a locale # supporting multibyte characters, and an absolute cursor position when # in such a locale. This is an artifact of the donated multibyte support. # Care must be taken when modifying its value. @_rl_last_c_pos = 0 @_rl_last_v_pos = 0 @cpos_adjusted = false @cpos_buffer_position = 0 # Number of lines currently on screen minus 1. @_rl_vis_botlin = 0 # Variables used only in this file. # The last left edge of text that was displayed. This is used when # doing horizontal scrolling. It shifts in thirds of a screenwidth. @last_lmargin = 0 # The line display buffers. One is the line currently displayed on # the screen. The other is the line about to be displayed. @visible_line = nil @invisible_line = nil # A buffer for `modeline' messages. @msg_buf = 0.chr * 128 # Non-zero forces the redisplay even if we thought it was unnecessary. @forced_display = false # Default and initial buffer size. Can grow. @line_size = 1024 # Variables to keep track of the expanded prompt string, which may # include invisible characters. @local_prompt = nil @local_prompt_prefix = nil @local_prompt_len = 0 @prompt_visible_length = 0 @prompt_prefix_length = 0 # The number of invisible characters in the line currently being # displayed on the screen. @visible_wrap_offset = 0 # The number of invisible characters in the prompt string. Static so it # can be shared between rl_redisplay and update_line @wrap_offset = 0 @prompt_last_invisible = 0 # The length (buffer offset) of the first line of the last (possibly # multi-line) buffer displayed on the screen. @visible_first_line_len = 0 # Number of invisible characters on the first physical line of the prompt. # Only valid when the number of physical characters in the prompt exceeds # (or is equal to) _rl_screenwidth. @prompt_invis_chars_first_line = 0 @prompt_last_screen_line = 0 @prompt_physical_chars = 0 # Variables to save and restore prompt and display information. # These are getting numerous enough that it's time to create a struct. @saved_local_prompt = nil @saved_local_prefix = nil @saved_last_invisible = 0 @saved_visible_length = 0 @saved_prefix_length = 0 @saved_local_length = 0 @saved_invis_chars_first_line = 0 @saved_physical_chars = 0 @inv_lbreaks = nil @vis_lbreaks = nil @_rl_wrapped_line = nil @term_buffer = nil @term_string_buffer = nil @tcap_initialized = false # While we are editing the history, this is the saved # version of the original line. @_rl_saved_line_for_history = nil # An array of HIST_ENTRY. This is where we store the history. @the_history = nil @history_base = 1 # Non-zero means that we have enforced a limit on the amount of # history that we save. @history_stifled = false # If HISTORY_STIFLED is non-zero, then this is the maximum number of # entries to remember. @history_max_entries = 0 @max_input_history = 0 # backwards compatibility # The current location of the interactive history pointer. Just makes # life easier for outside callers. @history_offset = 0 # The number of strings currently stored in the history list. @history_length = 0 @_rl_vi_last_command = 'i' # default `.' puts you in insert mode # Non-zero means enter insertion mode. @_rl_vi_doing_insert = 0 # Command keys which do movement for xxx_to commands. @vi_motion = " hl^$0ftFT;,%wbeWBE|" # Keymap used for vi replace characters. Created dynamically since # rarely used. @vi_replace_map = nil # The number of characters inserted in the last replace operation. @vi_replace_count = 0 # If non-zero, we have text inserted after a c[motion] command that put # us implicitly into insert mode. Some people want this text to be # attached to the command so that it is `redoable' with `.'. @vi_continued_command = false @vi_insert_buffer = nil @vi_insert_buffer_size = 0 @_rl_vi_last_repeat = 1 @_rl_vi_last_arg_sign = 1 @_rl_vi_last_motion = 0 @_rl_vi_last_search_char = 0 @_rl_vi_last_replacement = 0 @_rl_vi_last_key_before_insert = 0 @vi_redoing = 0 # Text modification commands. These are the `redoable' commands. @vi_textmod = "_*\\AaIiCcDdPpYyRrSsXx~" # Arrays for the saved marks. @vi_mark_chars = Array.new(26,-1) @emacs_standard_keymap = { "\C-@" => :rl_set_mark , "\C-a" => :rl_beg_of_line , "\C-b" => :rl_backward_char , "\C-d" => :rl_delete , "\C-e" => :rl_end_of_line , "\C-f" => :rl_forward_char , "\C-g" => :rl_abort , "\C-h" => :rl_rubout , "\C-i" => :rl_complete , "\C-j" => :rl_newline , "\C-k" => :rl_kill_line , "\C-l" => :rl_clear_screen , "\C-m" => :rl_newline , "\C-n" => :rl_get_next_history , "\C-p" => :rl_get_previous_history , "\C-q" => :rl_quoted_insert , "\C-r" => :rl_reverse_search_history , "\C-s" => :rl_forward_search_history , "\C-t" => :rl_transpose_chars , "\C-u" => :rl_unix_line_discard , "\C-v" => :rl_quoted_insert , "\C-w" => :rl_unix_word_rubout , "\C-y" => :rl_yank , "\C-]" => :rl_char_search , "\C-_" => :rl_undo_command , "\x7F" => :rl_rubout , "\e\C-g" => :rl_abort , "\e\C-h" => :rl_backward_kill_word , "\e\C-i" => :rl_tab_insert , "\e\C-j" => :rl_vi_editing_mode , "\e\C-m" => :rl_vi_editing_mode , "\e\C-r" => :rl_revert_line , "\e\C-y" => :rl_yank_nth_arg , "\e\C-[" => :rl_complete , "\e\C-]" => :rl_backward_char_search , "\e " => :rl_set_mark , "\e#" => :rl_insert_comment , "\e&" => :rl_tilde_expand , "\e*" => :rl_insert_completions , "\e-" => :rl_digit_argument , "\e." => :rl_yank_last_arg , "\e0" => :rl_digit_argument , "\e1" => :rl_digit_argument , "\e2" => :rl_digit_argument , "\e3" => :rl_digit_argument , "\e4" => :rl_digit_argument , "\e5" => :rl_digit_argument , "\e6" => :rl_digit_argument , "\e7" => :rl_digit_argument , "\e8" => :rl_digit_argument , "\e9" => :rl_digit_argument , "\e<" => :rl_beginning_of_history , "\e=" => :rl_possible_completions , "\e>" => :rl_end_of_history , "\e?" => :rl_possible_completions , "\eB" => :rl_backward_word , "\eC" => :rl_capitalize_word , "\eD" => :rl_kill_word , "\eF" => :rl_forward_word , "\eL" => :rl_downcase_word , "\eN" => :rl_noninc_forward_search , "\eP" => :rl_noninc_reverse_search , "\eR" => :rl_revert_line , "\eT" => :rl_transpose_words , "\eU" => :rl_upcase_word , "\eY" => :rl_yank_pop , "\e\\" => :rl_delete_horizontal_space , "\e_" => :rl_yank_last_arg , "\eb" => :rl_backward_word , "\ec" => :rl_capitalize_word , "\ed" => :rl_kill_word , "\ef" => :rl_forward_word , "\el" => :rl_downcase_word , "\en" => :rl_noninc_forward_search , "\ep" => :rl_noninc_reverse_search , "\er" => :rl_revert_line , "\et" => :rl_transpose_words , "\eu" => :rl_upcase_word , "\ey" => :rl_yank_pop , "\e~" => :rl_tilde_expand , "\377" => :rl_backward_kill_word , "\C-x\C-g" => :rl_abort , "\C-x\C-r" => :rl_re_read_init_file , "\C-x\C-u" => :rl_undo_command , "\C-x\C-x" => :rl_exchange_point_and_mark , "\C-x(" => :rl_start_kbd_macro , "\C-x)" => :rl_end_kbd_macro , "\C-xE" => :rl_call_last_kbd_macro , "\C-xe" => :rl_call_last_kbd_macro , "\C-x\x7F" => :rl_backward_kill_line } @vi_movement_keymap = { "\C-d" => :rl_vi_eof_maybe , "\C-e" => :rl_emacs_editing_mode , "\C-g" => :rl_abort , "\C-h" => :rl_backward_char , "\C-j" => :rl_newline , "\C-k" => :rl_kill_line , "\C-l" => :rl_clear_screen , "\C-m" => :rl_newline , "\C-n" => :rl_get_next_history , "\C-p" => :rl_get_previous_history , "\C-q" => :rl_quoted_insert , "\C-r" => :rl_reverse_search_history , "\C-s" => :rl_forward_search_history , "\C-t" => :rl_transpose_chars , "\C-u" => :rl_unix_line_discard , "\C-v" => :rl_quoted_insert , "\C-w" => :rl_unix_word_rubout , "\C-y" => :rl_yank , "\C-_" => :rl_vi_undo , " " => :rl_forward_char , "#" => :rl_insert_comment , "$" => :rl_end_of_line , "%" => :rl_vi_match , "&" => :rl_vi_tilde_expand , "*" => :rl_vi_complete , "+" => :rl_get_next_history , "," => :rl_vi_char_search , "-" => :rl_get_previous_history , "." => :rl_vi_redo , "/" => :rl_vi_search , "0" => :rl_beg_of_line , "1" => :rl_vi_arg_digit , "2" => :rl_vi_arg_digit , "3" => :rl_vi_arg_digit , "4" => :rl_vi_arg_digit , "5" => :rl_vi_arg_digit , "6" => :rl_vi_arg_digit , "7" => :rl_vi_arg_digit , "8" => :rl_vi_arg_digit , "9" => :rl_vi_arg_digit , "" => :rl_vi_char_search , "=" => :rl_vi_complete , "?" => :rl_vi_search , "A" => :rl_vi_append_eol , "B" => :rl_vi_prev_word , "C" => :rl_vi_change_to , "D" => :rl_vi_delete_to , "E" => :rl_vi_end_word , "F" => :rl_vi_char_search , "G" => :rl_vi_fetch_history , "I" => :rl_vi_insert_beg , "N" => :rl_vi_search_again , "P" => :rl_vi_put , "R" => :rl_vi_replace , "S" => :rl_vi_subst , "T" => :rl_vi_char_search , "U" => :rl_revert_line , "W" => :rl_vi_next_word , "X" => :rl_vi_rubout , "Y" => :rl_vi_yank_to , "\\" => :rl_vi_complete , "^" => :rl_vi_first_print , "_" => :rl_vi_yank_arg , "`" => :rl_vi_goto_mark , "a" => :rl_vi_append_mode , "b" => :rl_vi_prev_word , "c" => :rl_vi_change_to , "d" => :rl_vi_delete_to , "e" => :rl_vi_end_word , "f" => :rl_vi_char_search , "h" => :rl_backward_char , "i" => :rl_vi_insertion_mode , "j" => :rl_get_next_history , "k" => :rl_get_previous_history , "l" => :rl_forward_char , "m" => :rl_vi_set_mark , "n" => :rl_vi_search_again , "p" => :rl_vi_put , "r" => :rl_vi_change_char , "s" => :rl_vi_subst , "t" => :rl_vi_char_search , "u" => :rl_vi_undo , "w" => :rl_vi_next_word , "x" => :rl_vi_delete , "y" => :rl_vi_yank_to , "|" => :rl_vi_column , "~" => :rl_vi_change_case } @vi_insertion_keymap = { "\C-a" => :rl_insert , "\C-b" => :rl_insert , "\C-c" => :rl_insert , "\C-d" => :rl_vi_eof_maybe , "\C-e" => :rl_insert , "\C-f" => :rl_insert , "\C-g" => :rl_insert , "\C-h" => :rl_rubout , "\C-i" => :rl_complete , "\C-j" => :rl_newline , "\C-k" => :rl_insert , "\C-l" => :rl_insert , "\C-m" => :rl_newline , "\C-n" => :rl_insert , "\C-o" => :rl_insert , "\C-p" => :rl_insert , "\C-q" => :rl_insert , "\C-r" => :rl_reverse_search_history , "\C-s" => :rl_forward_search_history , "\C-t" => :rl_transpose_chars , "\C-u" => :rl_unix_line_discard , "\C-v" => :rl_quoted_insert , "\C-w" => :rl_unix_word_rubout , "\C-x" => :rl_insert , "\C-y" => :rl_yank , "\C-z" => :rl_insert , # "\C-[" => :rl_vi_movement_mode, # XXX: NOT IMPLEMENTED "\C-\\" => :rl_insert , "\C-]" => :rl_insert , "\C-^" => :rl_insert , "\C-_" => :rl_vi_undo , "\x7F" => :rl_rubout } @rl_library_version = RL_LIBRARY_VERSION @rl_readline_version = RL_READLINE_VERSION @rl_readline_name = "other" @rl_getc_function = :rl_getc # Non-zero tells rl_delete_text and rl_insert_text to not add to # the undo list. @_rl_doing_an_undo = false # How many unclosed undo groups we currently have. @_rl_undo_group_level = 0 # The current undo list for THE_LINE. @rl_undo_list = nil # Application-specific redisplay function. @rl_redisplay_function = :rl_redisplay # Global variables declared here. # What YOU turn on when you have handled all redisplay yourself. @rl_display_fixed = false @_rl_suppress_redisplay = 0 @_rl_want_redisplay = false # The stuff that gets printed out before the actual text of the line. # This is usually pointing to rl_prompt. @rl_display_prompt = nil # True if this is `real' readline as opposed to some stub substitute. @rl_gnu_readline_p = true for i in 32 .. 255 @emacs_standard_keymap[i.chr] = :rl_insert unless @emacs_standard_keymap[i.chr] @vi_insertion_keymap[i.chr] = :rl_insert unless @vi_insertion_keymap[i.chr] end # A pointer to the keymap that is currently in use. # By default, it is the standard emacs keymap. @_rl_keymap = @emacs_standard_keymap # The current style of editing. @rl_editing_mode = @emacs_mode # The current insert mode: input (the default) or overwrite @rl_insert_mode = RL_IM_DEFAULT # Non-zero if we called this function from _rl_dispatch(). It's present # so functions can find out whether they were called from a key binding # or directly from an application. @rl_dispatching = false # Non-zero if the previous command was a kill command. @_rl_last_command_was_kill = false # The current value of the numeric argument specified by the user. @rl_numeric_arg = 1 # Non-zero if an argument was typed. @rl_explicit_arg = false # Temporary value used while generating the argument. @rl_arg_sign = 1 # Non-zero means we have been called at least once before. @rl_initialized = false # Flags word encapsulating the current readline state. @rl_readline_state = RL_STATE_NONE # The current offset in the current input line. @rl_point = 0 # Mark in the current input line. @rl_mark = 0 # Length of the current input line. @rl_end = 0 # Make this non-zero to return the current input_line. @rl_done = false # The last function executed by readline. @rl_last_func = nil # Top level environment for readline_internal (). @readline_top_level = nil # The streams we interact with. @_rl_in_stream = nil @_rl_out_stream = nil # The names of the streams that we do input and output to. @rl_instream = nil @rl_outstream = nil @pop_index = 0 @push_index = 0 @ibuffer = 0.chr * 512 @ibuffer_len = @ibuffer.length - 1 # Non-zero means echo characters as they are read. Defaults to no echo # set to 1 if there is a controlling terminal, we can get its attributes, # and the attributes include `echo'. Look at rltty.c:prepare_terminal_settings # for the code that sets it. @readline_echoing_p = false # Current prompt. @rl_prompt = nil @rl_visible_prompt_length = 0 # Set to non-zero by calling application if it has already printed rl_prompt # and does not want readline to do it the first time. @rl_already_prompted = false # The number of characters read in order to type this complete command. @rl_key_sequence_length = 0 # If non-zero, then this is the address of a function to call just # before readline_internal_setup () prints the first prompt. @rl_startup_hook = nil # If non-zero, this is the address of a function to call just before # readline_internal_setup () returns and readline_internal starts # reading input characters. @rl_pre_input_hook = nil # The character that can generate an EOF. Really read from # the terminal driver... just defaulted here. @_rl_eof_char = "\cD" # Non-zero makes this the next keystroke to read. @rl_pending_input = 0 # Pointer to a useful terminal name. @rl_terminal_name = nil # Non-zero means to always use horizontal scrolling in line display. @_rl_horizontal_scroll_mode = false # Non-zero means to display an asterisk at the starts of history lines # which have been modified. @_rl_mark_modified_lines = false # The style of `bell' notification preferred. This can be set to NO_BELL, # AUDIBLE_BELL, or VISIBLE_BELL. @_rl_bell_preference = AUDIBLE_BELL # String inserted into the line by rl_insert_comment (). @_rl_comment_begin = nil # Keymap holding the function currently being executed. @rl_executing_keymap = nil # Keymap we're currently using to dispatch. @_rl_dispatching_keymap = nil # Non-zero means to erase entire line, including prompt, on empty input lines. @rl_erase_empty_line = false # Non-zero means to read only this many characters rather than up to a # character bound to accept-line. @rl_num_chars_to_read = 0 # Line buffer and maintenence. @rl_line_buffer = nil # Key sequence `contexts' @_rl_kscxt = nil # Non-zero means do not parse any lines other than comments and # parser directives. @_rl_parsing_conditionalized_out = false # Non-zero means to convert characters with the meta bit set to # escape-prefixed characters so we can indirect through # emacs_meta_keymap or vi_escape_keymap. @_rl_convert_meta_chars_to_ascii = true # Non-zero means to output characters with the meta bit set directly # rather than as a meta-prefixed escape sequence. @_rl_output_meta_chars = false # Non-zero means to look at the termios special characters and bind # them to equivalent readline functions at startup. @_rl_bind_stty_chars = true @rl_completion_display_matches_hook = nil XOK = 1 @_rl_term_clreol = nil @_rl_term_clrpag = nil @_rl_term_cr = nil @_rl_term_backspace = nil @_rl_term_goto = nil @_rl_term_pc = nil # Non-zero if we determine that the terminal can do character insertion. @_rl_terminal_can_insert = false # How to insert characters. @_rl_term_im = nil @_rl_term_ei = nil @_rl_term_ic = nil @_rl_term_ip = nil @_rl_term_IC = nil # How to delete characters. @_rl_term_dc = nil @_rl_term_DC = nil @_rl_term_forward_char = nil # How to go up a line. @_rl_term_up = nil # A visible bell; char if the terminal can be made to flash the screen. @_rl_visible_bell = nil # Non-zero means the terminal can auto-wrap lines. @_rl_term_autowrap = true # Non-zero means that this terminal has a meta key. @term_has_meta = 0 # The sequences to write to turn on and off the meta key, if this # terminal has one. @_rl_term_mm = nil @_rl_term_mo = nil # The key sequences output by the arrow keys, if this terminal has any. @_rl_term_ku = nil @_rl_term_kd = nil @_rl_term_kr = nil @_rl_term_kl = nil # How to initialize and reset the arrow keys, if this terminal has any. @_rl_term_ks = nil @_rl_term_ke = nil # The key sequences sent by the Home and End keys, if any. @_rl_term_kh = nil @_rl_term_kH = nil @_rl_term_at7 = nil # Delete key @_rl_term_kD = nil # Insert key @_rl_term_kI = nil # Cursor control @_rl_term_vs = nil # very visible @_rl_term_ve = nil # normal # Variables that hold the screen dimensions, used by the display code. @_rl_screenwidth = @_rl_screenheight = @_rl_screenchars = 0 # Non-zero means the user wants to enable the keypad. @_rl_enable_keypad = false # Non-zero means the user wants to enable a meta key. @_rl_enable_meta = true # **************************************************************** # # Completion matching, from readline's point of view. # # **************************************************************** # Variables known only to the readline library. # If non-zero, non-unique completions always show the list of matches. @_rl_complete_show_all = false # If non-zero, non-unique completions show the list of matches, unless it # is not possible to do partial completion and modify the line. @_rl_complete_show_unmodified = false # If non-zero, completed directory names have a slash appended. @_rl_complete_mark_directories = true # If non-zero, the symlinked directory completion behavior introduced in # readline-4.2a is disabled, and symlinks that point to directories have # a slash appended (subject to the value of _rl_complete_mark_directories). # This is user-settable via the mark-symlinked-directories variable. @_rl_complete_mark_symlink_dirs = false # If non-zero, completions are printed horizontally in alphabetical order, # like `ls -x'. @_rl_print_completions_horizontally = false @_rl_completion_case_fold = false # If non-zero, don't match hidden files (filenames beginning with a `.' on # Unix) when doing filename completion. @_rl_match_hidden_files = true # Global variables available to applications using readline. # Non-zero means add an additional character to each filename displayed # during listing completion iff rl_filename_completion_desired which helps # to indicate the type of file being listed. @rl_visible_stats = false # If non-zero, then this is the address of a function to call when # completing on a directory name. The function is called with # the address of a string (the current directory name) as an arg. @rl_directory_completion_hook = nil @rl_directory_rewrite_hook = nil # Non-zero means readline completion functions perform tilde expansion. @rl_complete_with_tilde_expansion = false # Pointer to the generator function for completion_matches (). # NULL means to use rl_filename_completion_function (), the default filename # completer. @rl_completion_entry_function = nil # Pointer to alternative function to create matches. # Function is called with TEXT, START, and END. # START and END are indices in RL_LINE_BUFFER saying what the boundaries # of TEXT are. # If this function exists and returns NULL then call the value of # rl_completion_entry_function to try to match, otherwise use the # array of strings returned. @rl_attempted_completion_function = nil # Non-zero means to suppress normal filename completion after the # user-specified completion function has been called. @rl_attempted_completion_over = false # Set to a character indicating the type of completion being performed # by rl_complete_internal, available for use by application completion # functions. @rl_completion_type = 0 # Up to this many items will be displayed in response to a # possible-completions call. After that, we ask the user if # she is sure she wants to see them all. A negative value means # don't ask. @rl_completion_query_items = 100 @_rl_page_completions = 1 # The basic list of characters that signal a break between words for the # completer routine. The contents of this variable is what breaks words # in the shell, i.e. " \t\n\"\\'`@$><=" @rl_basic_word_break_characters = " \t\n\"\\'`@$><=|&{(" # }) # List of basic quoting characters. @rl_basic_quote_characters = "\"'" # The list of characters that signal a break between words for # rl_complete_internal. The default list is the contents of # rl_basic_word_break_characters. @rl_completer_word_break_characters = nil # Hook function to allow an application to set the completion word # break characters before readline breaks up the line. Allows # position-dependent word break characters. @rl_completion_word_break_hook = nil # List of characters which can be used to quote a substring of the line. # Completion occurs on the entire substring, and within the substring # rl_completer_word_break_characters are treated as any other character, # unless they also appear within this list. @rl_completer_quote_characters = nil # List of characters that should be quoted in filenames by the completer. @rl_filename_quote_characters = nil # List of characters that are word break characters, but should be left # in TEXT when it is passed to the completion function. The shell uses # this to help determine what kind of completing to do. @rl_special_prefixes = nil # If non-zero, then disallow duplicates in the matches. @rl_ignore_completion_duplicates = true # Non-zero means that the results of the matches are to be treated # as filenames. This is ALWAYS zero on entry, and can only be changed # within a completion entry finder function. @rl_filename_completion_desired = false # Non-zero means that the results of the matches are to be quoted using # double quotes (or an application-specific quoting mechanism) if the # filename contains any characters in rl_filename_quote_chars. This is # ALWAYS non-zero on entry, and can only be changed within a completion # entry finder function. @rl_filename_quoting_desired = true # This function, if defined, is called by the completer when real # filename completion is done, after all the matching names have been # generated. It is passed a (char**) known as matches in the code below. # It consists of a NULL-terminated array of pointers to potential # matching strings. The 1st element (matches[0]) is the maximal # substring that is common to all matches. This function can re-arrange # the list of matches as required, but all elements of the array must be # free()'d if they are deleted. The main intent of this function is # to implement FIGNORE a la SunOS csh. @rl_ignore_some_completions_function = nil # Set to a function to quote a filename in an application-specific fashion. # Called with the text to quote, the type of match found (single or multiple) # and a pointer to the quoting character to be used, which the function can # reset if desired. #rl_filename_quoting_function = rl_quote_filename # Function to call to remove quoting characters from a filename. Called # before completion is attempted, so the embedded quotes do not interfere # with matching names in the file system. Readline doesn't do anything # with this it's set only by applications. @rl_filename_dequoting_function = nil # Function to call to decide whether or not a word break character is # quoted. If a character is quoted, it does not break words for the # completer. @rl_char_is_quoted_p = nil # If non-zero, the completion functions don't append anything except a # possible closing quote. This is set to 0 by rl_complete_internal and # may be changed by an application-specific completion function. @rl_completion_suppress_append = false # Character appended to completed words when at the end of the line. The # default is a space. @rl_completion_append_character = ' ' # If non-zero, the completion functions don't append any closing quote. # This is set to 0 by rl_complete_internal and may be changed by an # application-specific completion function. @rl_completion_suppress_quote = false # Set to any quote character readline thinks it finds before any application # completion function is called. @rl_completion_quote_character = 0 # Set to a non-zero value if readline found quoting anywhere in the word to # be completed set before any application completion function is called. @rl_completion_found_quote = false # If non-zero, a slash will be appended to completed filenames that are # symbolic links to directory names, subject to the value of the # mark-directories variable (which is user-settable). This exists so # that application completion functions can override the user's preference # (set via the mark-symlinked-directories variable) if appropriate. # It's set to the value of _rl_complete_mark_symlink_dirs in # rl_complete_internal before any application-specific completion # function is called, so without that function doing anything, the user's # preferences are honored. @rl_completion_mark_symlink_dirs = false # If non-zero, inhibit completion (temporarily). @rl_inhibit_completion = false # Variables local to this file. # Local variable states what happened during the last completion attempt. @completion_changed_buffer = nil # Non-zero means treat 0200 bit in terminal input as Meta bit. @_rl_meta_flag = false # Stack of previous values of parsing_conditionalized_out. @if_stack = [] @if_stack_depth = 0 # The last key bindings file read. @last_readline_init_file = nil # The file we're currently reading key bindings from. @current_readline_init_file = nil @current_readline_init_include_level = 0 @current_readline_init_lineno = 0 ENV["HOME"] ||= ENV["HOMEDRIVE"]+ENV["HOMEPATH"] @directory = nil @filename = nil @dirname = nil @users_dirname = nil @filename_len = 0 attr_accessor :rl_attempted_completion_function,:rl_deprep_term_function, :rl_event_hook,:rl_attempted_completion_over,:rl_basic_quote_characters, :rl_basic_word_break_characters,:rl_completer_quote_characters, :rl_completer_word_break_characters,:rl_completion_append_character, :rl_filename_quote_characters,:rl_instream,:rl_library_version,:rl_outstream, :rl_readline_name,:history_length,:history_base module_function # Okay, now we write the entry_function for filename completion. In the # general case. Note that completion in the shell is a little different # because of all the pathnames that must be followed when looking up the # completion for a command. def rl_filename_completion_function(text, state) # If we don't have any state, then do some initialization. if (state == 0) # If we were interrupted before closing the directory or reading #all of its contents, close it. if(@directory) @directory.close @directory = nil end text.delete!(0.chr) @filename = text.dup if text.length == 0 text = "." end @dirname = File.dirname(text) # We aren't done yet. We also support the "~user" syntax. # Save the version of the directory that the user typed. @users_dirname = @dirname.dup if (@dirname[0,1] == '~') @dirname = File.expand_path(@dirname) end # The directory completion hook should perform any necessary # dequoting. if (@rl_directory_completion_hook && send(rl_directory_completion_hook,@dirname)) @users_dirname = @dirname.dup elsif (@rl_completion_found_quote && @rl_filename_dequoting_function) # delete single and double quotes @temp = send(@rl_filename_dequoting_function,@users_dirname, @rl_completion_quote_character) @users_dirname = temp end @directory = Dir.new(@dirname) # Now dequote a non-null filename. if (@filename && @filename.length>0 && @rl_completion_found_quote && @rl_filename_dequoting_function) # delete single and double quotes temp = send(@rl_filename_dequoting_function,@filename, @rl_completion_quote_character) @filename = temp end @filename_len = @filename.length @rl_filename_completion_desired = true end # At this point we should entertain the possibility of hacking wildcarded # filenames, like /usr/man/man/te. If the directory name # contains globbing characters, then build an array of directories, and # then map over that list while completing. # *** UNIMPLEMENTED *** # Now that we have some state, we can read the directory. entry = nil while(@directory && (entry = @directory.read)) d_name = entry # Special case for no filename. If the user has disabled the # `match-hidden-files' variable, skip filenames beginning with `.'. #All other entries except "." and ".." match. if (@filename_len == 0) next if (!@_rl_match_hidden_files && d_name[0,1] == '.') break if (d_name != '.' && d_name != '..') else # Otherwise, if these match up to the length of filename, then # it is a match. if (@_rl_completion_case_fold) break if d_name =~ /^#{Regexp.escape(@filename)}/i else break if d_name =~ /^#{Regexp.escape(@filename)}/ end end end if entry.nil? if @directory @directory.close @directory = nil end @dirname = nil @filename = nil @users_dirname = nil return nil else if (@dirname != '.') if (@rl_complete_with_tilde_expansion && @users_dirname[0,1] == "~") temp = @dirname if(temp[-1,1] != '/') temp += '/' end else temp = @users_dirname if(temp[-1,1] != '/') temp += '/' end end temp += entry else temp = entry.dup end return (temp) end end # A completion function for usernames. # TEXT contains a partial username preceded by a random # character (usually `~'). def rl_username_completion_function(text, state) return nil if RUBY_PLATFORM =~ /mswin|mingw/ if (state == 0) first_char = text[0,1] first_char_loc = (first_char == '~' ? 1 : 0) username = text[first_char_loc..-1] namelen = username.length Etc.setpwent() end while (entry = Etc.getpwent()) # Null usernames should result in all users as possible completions. break if (namelen == 0 || entry.name =~ /^#{username}/ ) end if entry.nil? Etc.endpwent() return nil else value = text.dup value[first_char_loc..-1] = entry.name if (first_char == '~') @rl_filename_completion_desired = true end return (value) end end #************************************************************* # # Application-callable completion match generator functions # #************************************************************* # Return an array of (char *) which is a list of completions for TEXT. # If there are no completions, return a NULL pointer. # The first entry in the returned array is the substitution for TEXT. # The remaining entries are the possible completions. # The array is terminated with a NULL pointer. # # ENTRY_FUNCTION is a function of two args, and returns a (char *). # The first argument is TEXT. # The second is a state argument it should be zero on the first call, and # non-zero on subsequent calls. It returns a NULL pointer to the caller # when there are no more matches. # def rl_completion_matches(text, entry_function) matches = 0 match_list_size = 10 match_list = [] match_list[1] = nil while (string = send(entry_function, text, matches)) match_list[matches+=1] = string match_list[matches+1] = nil end # If there were any matches, then look through them finding out the # lowest common denominator. That then becomes match_list[0]. if (matches!=0) compute_lcd_of_matches(match_list, matches, text) else # There were no matches. match_list = nil end return (match_list) end def _rl_to_lower(char) char.nil? ? nil : char.chr.downcase end # Find the common prefix of the list of matches, and put it into # matches[0]. def compute_lcd_of_matches(match_list, matches, text) # If only one match, just use that. Otherwise, compare each # member of the list with the next, finding out where they # stop matching. if (matches == 1) match_list[0] = match_list[1] match_list[1] = nil return 1 end i = 1 low = 100000 while(i 1) si += v - 1 end else break if (c1 != c2) end si += 1 end else si = 0 while((c1 = match_list[i][si]) && (c2 = match_list[i + 1][si])) if !@rl_byte_oriented if(!_rl_compare_chars(match_list[i],si,match_list[i+1],si)) break elsif ((v = _rl_get_char_len(match_list[i][si..-1])) > 1) si += v - 1 end else break if (c1 != c2) end si += 1 end end if (low > si) low = si end i += 1 end # If there were multiple matches, but none matched up to even the # first character, and the user typed something, use that as the # value of matches[0]. if (low == 0 && text && text.length>0 ) match_list[0] = text.dup else # XXX - this might need changes in the presence of multibyte chars # If we are ignoring case, try to preserve the case of the string # the user typed in the face of multiple matches differing in case. if (@_rl_completion_case_fold) # We're making an assumption here: # IF we're completing filenames AND # the application has defined a filename dequoting function AND # we found a quote character AND # the application has requested filename quoting # THEN # we assume that TEXT was dequoted before checking against # the file system and needs to be dequoted here before we # check against the list of matches # FI if (@rl_filename_completion_desired && @rl_filename_dequoting_function && @rl_completion_found_quote && @rl_filename_quoting_desired) dtext = send(@rl_filename_dequoting_function,text, @rl_completion_quote_character) text = dtext end # sort the list to get consistent answers. match_list = [match_list[0]] + match_list[1..-1].sort si = text.length if (si <= low) for i in 1 .. matches if match_list[i][0,si] == text match_list[0] = match_list[i][0,low] break end # no casematch, use first entry if (i > matches) match_list[0] = match_list[1][0,low] end end else # otherwise, just use the text the user typed. match_list[0] = text[0,low] end else match_list[0] = match_list[1][0,low] end end return matches end def rl_vi_editing_mode(count, key) _rl_set_insert_mode(RL_IM_INSERT, 1) # vi mode ignores insert mode @rl_editing_mode = @vi_mode rl_vi_insertion_mode(1, key) 0 end # Switching from one mode to the other really just involves # switching keymaps. def rl_vi_insertion_mode(count, key) @_rl_keymap = @vi_insertion_keymap @_rl_vi_last_key_before_insert = key 0 end def rl_emacs_editing_mode(count, key) @rl_editing_mode = @emacs_mode _rl_set_insert_mode(RL_IM_INSERT, 1) # emacs mode default is insert mode @_rl_keymap = @emacs_standard_keymap 0 end # Function for the rest of the library to use to set insert/overwrite mode. def _rl_set_insert_mode(im, force) @rl_insert_mode = im end # Toggle overwrite mode. A positive explicit argument selects overwrite # mode. A negative or zero explicit argument selects insert mode. def rl_overwrite_mode(count, key) if (!@rl_explicit_arg) _rl_set_insert_mode(@rl_insert_mode ^ 1, 0) elsif (count > 0) _rl_set_insert_mode(RL_IM_OVERWRITE, 0) else _rl_set_insert_mode(RL_IM_INSERT, 0) end 0 end # A function for simple tilde expansion. def rl_tilde_expand(ignore, key) _end = @rl_point start = _end - 1 if (@rl_point == @rl_end && @rl_line_buffer[@rl_point,1] == '~' ) homedir = File.expand_path("~") _rl_replace_text(homedir, start, _end) return (0) elsif (@rl_line_buffer[start,1] != '~') while(!whitespace(@rl_line_buffer[start,1]) && start >= 0) start -= 1 end start+=1 end _end = start begin _end+=1 end while(!whitespace(@rl_line_buffer[_end,1]) && _end < @rl_end) if (whitespace(@rl_line_buffer[_end,1]) || _end >= @rl_end) _end-=1 end # If the first character of the current word is a tilde, perform #tilde expansion and insert the result. If not a tilde, do # nothing. if (@rl_line_buffer[start,1] == '~') len = _end - start + 1 temp = @rl_line_buffer[start,len] homedir = File.expand_path(temp) temp = nil _rl_replace_text(homedir, start, _end) end 0 end # Clean up the terminal and readline state after catching a signal, before # resending it to the calling application. def rl_cleanup_after_signal() _rl_clean_up_for_exit() if (@rl_deprep_term_function) send(@rl_deprep_term_function) end rl_clear_pending_input() rl_clear_signals() end def _rl_clean_up_for_exit() if @readline_echoing_p _rl_move_vert(@_rl_vis_botlin) @_rl_vis_botlin = 0 @rl_outstream.flush rl_restart_output(1, 0) end end # Move the cursor from _rl_last_c_pos to NEW, which are buffer indices. # (Well, when we don't have multibyte characters, _rl_last_c_pos is a # buffer index.) # DATA is the contents of the screen line of interest; i.e., where # the movement is being done. def _rl_move_cursor_relative(new, data, start=0) woff = w_offset(@_rl_last_v_pos, @wrap_offset) cpos = @_rl_last_c_pos if !@rl_byte_oriented dpos = _rl_col_width(data, start, start+new) if (dpos > @prompt_last_invisible) # XXX - don't use woff here dpos -= woff # Since this will be assigned to _rl_last_c_pos at the end (more # precisely, _rl_last_c_pos == dpos when this function returns), # let the caller know. @cpos_adjusted = true end else dpos = new end # If we don't have to do anything, then return. if (cpos == dpos) return end if @hConsoleHandle csbi = 0.chr * 24 @GetConsoleScreenBufferInfo.Call(@hConsoleHandle,csbi) x,y = csbi[4,4].unpack('SS') x = dpos @SetConsoleCursorPosition.Call(@hConsoleHandle,y*65536+x) @_rl_last_c_pos = dpos return end # It may be faster to output a CR, and then move forwards instead # of moving backwards. # i == current physical cursor position. if !@rl_byte_oriented i = @_rl_last_c_pos else i = @_rl_last_c_pos - woff end if (dpos == 0 || cr_faster(dpos, @_rl_last_c_pos) || (@_rl_term_autowrap && i == @_rl_screenwidth)) @rl_outstream.write(@_rl_term_cr) cpos = @_rl_last_c_pos = 0 end if (cpos < dpos) # Move the cursor forward. We do it by printing the command # to move the cursor forward if there is one, else print that # portion of the output buffer again. Which is cheaper? # The above comment is left here for posterity. It is faster # to print one character (non-control) than to print a control # sequence telling the terminal to move forward one character. # That kind of control is for people who don't know what the # data is underneath the cursor. # However, we need a handle on where the current display position is # in the buffer for the immediately preceding comment to be true. # In multibyte locales, we don't currently have that info available. # Without it, we don't know where the data we have to display begins # in the buffer and we have to go back to the beginning of the screen # line. In this case, we can use the terminal sequence to move forward # if it's available. if !@rl_byte_oriented if (@_rl_term_forward_char) @rl_outstream.write(@_rl_term_forward_char * (dpos-cpos)) else @rl_outstream.write(@_rl_term_cr) @rl_outstream.write(data[start,new]) end else @rl_outstream.write(data[start+cpos,new-cpos]) end elsif (cpos > dpos) _rl_backspace(cpos - dpos) end @_rl_last_c_pos = dpos end # PWP: move the cursor up or down. def _rl_move_vert(to) if (@_rl_last_v_pos == to || to > @_rl_screenheight) return end if ((delta = to - @_rl_last_v_pos) > 0) @rl_outstream.write("\n"*delta) @rl_outstream.write("\r") @_rl_last_c_pos = 0 else if(@_rl_term_up) @rl_outstream.write(@_rl_term_up*(-delta)) end end @_rl_last_v_pos = to # Now TO is here end def rl_setstate(x) (@rl_readline_state |= (x)) end def rl_unsetstate(x) (@rl_readline_state &= ~(x)) end def rl_isstate(x) (@rl_readline_state & (x))!=0 end # Clear any pending input pushed with rl_execute_next() def rl_clear_pending_input() @rl_pending_input = 0 rl_unsetstate(RL_STATE_INPUTPENDING) 0 end def rl_restart_output(count, key) 0 end def rl_clear_signals() if Signal.list['WINCH'] trap "WINCH",@def_proc end end def rl_set_signals() if Signal.list['WINCH'] @def_proc = trap "WINCH",Proc.new{rl_sigwinch_handler(0)} end end # Current implementation: # \001 (^A) start non-visible characters # \002 (^B) end non-visible characters # all characters except \001 and \002 (following a \001) are copied to # the returned string all characters except those between \001 and # \002 are assumed to be `visible'. def expand_prompt(pmt) # Short-circuit if we can. if (@rl_byte_oriented && pmt[RL_PROMPT_START_IGNORE].nil?) r = pmt.dup lp = r.length lip = 0 niflp = 0 vlp = lp return [r,lp,lip,niflp,vlp] end l = pmt.length ret = '' invfl = 0 # invisible chars in first line of prompt invflset = 0 # we only want to set invfl once igstart = 0 rl = 0 ignoring = false last = ninvis = physchars = 0 for pi in 0 ... pmt.length # This code strips the invisible character string markers #RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE if (!ignoring && pmt[pi,1] == RL_PROMPT_START_IGNORE) # XXX - check ignoring? ignoring = true igstart = pi next elsif (ignoring && pmt[pi,1] == RL_PROMPT_END_IGNORE) ignoring = false if (pi != (igstart + 1)) last = ret.length - 1 end next else if !@rl_byte_oriented pind = pi ind = _rl_find_next_mbchar(pmt, pind, 1, MB_FIND_NONZERO) l = ind - pind while (l>0) l-=1 ret << pmt[pi] pi += 1 end if (!ignoring) rl += ind - pind physchars += _rl_col_width(pmt, pind, ind) else ninvis += ind - pind end pi-=1 # compensate for later increment else ret << pmt[pi] if (!ignoring) rl+=1 # visible length byte counter physchars+=1 else ninvis+=1 # invisible chars byte counter end if (invflset == 0 && rl >= @_rl_screenwidth) invfl = ninvis invflset = 1 end end end end if (rl < @_rl_screenwidth) invfl = ninvis end lp = rl lip = last niflp = invfl vlp = physchars return [ret,lp,lip,niflp,vlp] end #* #* Expand the prompt string into the various display components, if #* necessary. #* #* local_prompt = expanded last line of string in rl_display_prompt #* (portion after the final newline) #* local_prompt_prefix = portion before last newline of rl_display_prompt, #* expanded via expand_prompt #* prompt_visible_length = number of visible characters in local_prompt #* prompt_prefix_length = number of visible characters in local_prompt_prefix #* #* This function is called once per call to readline(). It may also be #* called arbitrarily to expand the primary prompt. #* #* The return value is the number of visible characters on the last line #* of the (possibly multi-line) prompt. #* def rl_expand_prompt(prompt) @local_prompt = @local_prompt_prefix = nil @local_prompt_len = 0 @prompt_last_invisible = @prompt_invis_chars_first_line = 0 @prompt_visible_length = @prompt_physical_chars = 0 if (prompt.nil? || prompt == '') return (0) end pi = prompt.rindex("\n") if pi.nil? # The prompt is only one logical line, though it might wrap. @local_prompt,@prompt_visible_length,@prompt_last_invisible,@prompt_invis_chars_first_line,@prompt_physical_chars = expand_prompt(prompt) @local_prompt_prefix = nil @local_prompt_len = @local_prompt ? @local_prompt.length : 0 return (@prompt_visible_length) else # The prompt spans multiple lines. pi += 1 if prompt.length!=pi+1 t = pi @local_prompt,@prompt_visible_length,@prompt_last_invisible,_,@prompt_physical_chars = expand_prompt(prompt[pi..-1]) c = prompt[t] prompt[t] = 0.chr # The portion of the prompt string up to and including the #final newline is now null-terminated. @local_prompt_prefix,@prompt_prefix_length,_,@prompt_invis_chars_first_line, = expand_prompt(prompt) prompt[t] = c @local_prompt_len = @local_prompt ? @local_prompt.length : 0 return (@prompt_prefix_length) end end # Set up the prompt and expand it. Called from readline() and # rl_callback_handler_install (). def rl_set_prompt(prompt) @rl_prompt = prompt ? prompt.dup : nil @rl_display_prompt = @rl_prompt ? @rl_prompt : "" @rl_visible_prompt_length = rl_expand_prompt(@rl_prompt) 0 end def get_term_capabilities(buffer) hash = {} `infocmp -C`.split(':').select{|x| x =~ /(.*)=(.*)/ and hash[$1]=$2.gsub('\\E',"\e").gsub(/\^(.)/){($1[0].ord ^ ((?a..?z).include?($1[0]) ? 0x60 : 0x40)).chr}} @_rl_term_at7 = hash["@7"] @_rl_term_DC = hash["DC"] @_rl_term_IC = hash["IC"] @_rl_term_clreol = hash["ce"] @_rl_term_clrpag = hash["cl"] @_rl_term_cr = hash["cr"] @_rl_term_dc = hash["dc"] @_rl_term_ei = hash["ei"] @_rl_term_ic = hash["ic"] @_rl_term_im = hash["im"] @_rl_term_kD = hash["kD"] @_rl_term_kH = hash["kH"] @_rl_term_kI = hash["kI"] @_rl_term_kd = hash["kd"] @_rl_term_ke = hash["ke"] @_rl_term_kh = hash["kh"] @_rl_term_kl = hash["kl"] @_rl_term_kr = hash["kr"] @_rl_term_ks = hash["ks"] @_rl_term_ku = hash["ku"] @_rl_term_backspace = hash["le"] @_rl_term_mm = hash["mm"] @_rl_term_mo = hash["mo"] @_rl_term_forward_char = hash["nd"] @_rl_term_pc = hash["pc"] @_rl_term_up = hash["up"] @_rl_visible_bell = hash["vb"] @_rl_term_vs = hash["vs"] @_rl_term_ve = hash["ve"] @tcap_initialized = true end # Set the environment variables LINES and COLUMNS to lines and cols, # respectively. def sh_set_lines_and_columns(lines, cols) ENV["LINES"] = lines.to_s ENV["COLUMNS"] = cols.to_s end # Get readline's idea of the screen size. TTY is a file descriptor open # to the terminal. If IGNORE_ENV is true, we do not pay attention to the # values of $LINES and $COLUMNS. The tests for TERM_STRING_BUFFER being # non-null serve to check whether or not we have initialized termcap. def _rl_get_screen_size(tty, ignore_env) if @hConsoleHandle csbi = 0.chr * 24 @GetConsoleScreenBufferInfo.Call(@hConsoleHandle,csbi) wc,wr = csbi[0,4].unpack('SS') # wr,wc, = `mode con`.scan(/\d+\n/).map{|x| x.to_i} @_rl_screenwidth = wc @_rl_screenheight = wr else wr,wc = `stty size`.split(' ').map{|x| x.to_i} @_rl_screenwidth = wc @_rl_screenheight = wr if ignore_env==0 && ENV['LINES'] @_rl_screenheight = ENV['LINES'].to_i end if ignore_env==0 && ENV['COLUMNS'] @_rl_screenwidth = ENV['COLUMNS'].to_i end end # If all else fails, default to 80x24 terminal. if @_rl_screenwidth.nil? || @_rl_screenwidth <= 1 @_rl_screenwidth = 80 end if @_rl_screenheight.nil? || @_rl_screenheight <= 0 @_rl_screenheight = 24 end # If we're being compiled as part of bash, set the environment # variables $LINES and $COLUMNS to new values. Otherwise, just # do a pair of putenv () or setenv () calls. sh_set_lines_and_columns(@_rl_screenheight, @_rl_screenwidth) if !@_rl_term_autowrap @_rl_screenwidth-=1 end @_rl_screenchars = @_rl_screenwidth * @_rl_screenheight end def tgetflag(name) `infocmp -C -r`.scan(/\w{2}/).include?(name) end # Return the function (or macro) definition which would be invoked via # KEYSEQ if executed in MAP. If MAP is NULL, then the current keymap is # used. TYPE, if non-NULL, is a pointer to an int which will receive the # type of the object pointed to. One of ISFUNC (function), ISKMAP (keymap), # or ISMACR (macro). def rl_function_of_keyseq(keyseq, map, type) map ||= @_rl_keymap map[keyseq] end # Bind the key sequence represented by the string KEYSEQ to # the arbitrary pointer DATA. TYPE says what kind of data is # pointed to by DATA, right now this can be a function (ISFUNC), # a macro (ISMACR), or a keymap (ISKMAP). This makes new keymaps # as necessary. The initial place to do bindings is in MAP. def rl_generic_bind(type, keyseq, data, map) map[keyseq] = data 0 end # Bind the key sequence represented by the string KEYSEQ to # FUNCTION. This makes new keymaps as necessary. The initial # place to do bindings is in MAP. def rl_bind_keyseq_in_map(keyseq, function, map) rl_generic_bind(ISFUNC, keyseq, function, map) end # Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. Right # now, this is always used to attempt to bind the arrow keys, hence the # check for rl_vi_movement_mode. def rl_bind_keyseq_if_unbound_in_map(keyseq, default_func, kmap) if (keyseq) func = rl_function_of_keyseq(keyseq, kmap, nil) if (func.nil? || func == :rl_vi_movement_mode) return (rl_bind_keyseq_in_map(keyseq, default_func, kmap)) else return 1 end end 0 end def rl_bind_keyseq_if_unbound(keyseq, default_func) rl_bind_keyseq_if_unbound_in_map(keyseq, default_func, @_rl_keymap) end # Bind the arrow key sequences from the termcap description in MAP. def bind_termcap_arrow_keys(map) xkeymap = @_rl_keymap @_rl_keymap = map rl_bind_keyseq_if_unbound(@_rl_term_ku, :rl_get_previous_history) rl_bind_keyseq_if_unbound(@_rl_term_kd, :rl_get_next_history) rl_bind_keyseq_if_unbound(@_rl_term_kr, :rl_forward_char) rl_bind_keyseq_if_unbound(@_rl_term_kl, :rl_backward_char) rl_bind_keyseq_if_unbound(@_rl_term_kh, :rl_beg_of_line) # Home rl_bind_keyseq_if_unbound(@_rl_term_at7, :rl_end_of_line) # End rl_bind_keyseq_if_unbound(@_rl_term_kD, :rl_delete) rl_bind_keyseq_if_unbound(@_rl_term_kI, :rl_overwrite_mode) @_rl_keymap = xkeymap end def _rl_init_terminal_io(terminal_name) term = terminal_name ? terminal_name : ENV["TERM"] @_rl_term_clrpag = @_rl_term_cr = @_rl_term_clreol = nil tty = @rl_instream ? @rl_instream.fileno : 0 if no_terminal? term = "dumb" @_rl_bind_stty_chars = false end @term_string_buffer ||= 0.chr * 2032 @term_buffer ||= 0.chr * 4080 buffer = @term_string_buffer tgetent_ret = (term != "dumb") ? 1 : -1 if (tgetent_ret <= 0) buffer = @term_buffer = @term_string_buffer = nil @_rl_term_autowrap = false # used by _rl_get_screen_size # Allow calling application to set default height and width, using #rl_set_screen_size if (@_rl_screenwidth <= 0 || @_rl_screenheight <= 0) _rl_get_screen_size(tty, 0) end # Defaults. if (@_rl_screenwidth <= 0 || @_rl_screenheight <= 0) @_rl_screenwidth = 79 @_rl_screenheight = 24 end # Everything below here is used by the redisplay code (tputs). @_rl_screenchars = @_rl_screenwidth * @_rl_screenheight @_rl_term_cr = "\r" @_rl_term_im = @_rl_term_ei = @_rl_term_ic = @_rl_term_IC = nil @_rl_term_up = @_rl_term_dc = @_rl_term_DC = @_rl_visible_bell = nil @_rl_term_ku = @_rl_term_kd = @_rl_term_kl = @_rl_term_kr = nil @_rl_term_kh = @_rl_term_kH = @_rl_term_kI = @_rl_term_kD = nil @_rl_term_ks = @_rl_term_ke = @_rl_term_at7 = nil @_rl_term_mm = @_rl_term_mo = nil @_rl_term_ve = @_rl_term_vs = nil @_rl_term_forward_char = nil @_rl_terminal_can_insert = @term_has_meta = false # Reasonable defaults for tgoto(). Readline currently only uses # tgoto if _rl_term_IC or _rl_term_DC is defined, but just in case we # change that later... @_rl_term_backspace = "\b" return 0 end get_term_capabilities(buffer) @_rl_term_cr ||= "\r" @_rl_term_autowrap = !!(tgetflag("am") && tgetflag("xn")) # Allow calling application to set default height and width, using # rl_set_screen_size if (@_rl_screenwidth <= 0 || @_rl_screenheight <= 0) _rl_get_screen_size(tty, 0) end # "An application program can assume that the terminal can do # character insertion if *any one of* the capabilities `IC', # `im', `ic' or `ip' is provided." But we can't do anything if # only `ip' is provided, so... @_rl_terminal_can_insert = !!(@_rl_term_IC || @_rl_term_im || @_rl_term_ic) # Check to see if this terminal has a meta key and clear the capability # variables if there is none. @term_has_meta = !!(tgetflag("km") || tgetflag("MT")) if !@term_has_meta @_rl_term_mm = @_rl_term_mo = nil end # Attempt to find and bind the arrow keys. Do not override already # bound keys in an overzealous attempt, however. bind_termcap_arrow_keys(@emacs_standard_keymap) bind_termcap_arrow_keys(@vi_movement_keymap) bind_termcap_arrow_keys(@vi_insertion_keymap) return 0 end # New public way to set the system default editing chars to their readline # equivalents. def rl_tty_set_default_bindings(kmap) h = Hash[*`stty -a`.scan(/(\w+) = ([^;]+);/).flatten] h.each {|k,v| v.gsub!(/\^(.)/){($1[0].ord ^ ((?a..?z).include?($1[0]) ? 0x60 : 0x40)).chr}} kmap[h['erase']] = :rl_rubout kmap[h['kill']] = :rl_unix_line_discard kmap[h['werase']] = :rl_unix_word_rubout kmap[h['lnext']] = :rl_quoted_insert end # If this system allows us to look at the values of the regular # input editing characters, then bind them to their readline # equivalents, iff the characters are not bound to keymaps. def readline_default_bindings() if @_rl_bind_stty_chars rl_tty_set_default_bindings(@_rl_keymap) end end def _rl_init_eightbit() end # Do key bindings from a file. If FILENAME is NULL it defaults # to the first non-null filename from this list: # 1. the filename used for the previous call # 2. the value of the shell variable `INPUTRC' # 3. ~/.inputrc # 4. /etc/inputrc # If the file existed and could be opened and read, 0 is returned, # otherwise errno is returned. def rl_read_init_file(filename) =begin # Default the filename. filename ||= @last_readline_init_file filename ||= ENV["INPUTRC"] if (filename.nil? || filename == '') filename = DEFAULT_INPUTRC # Try to read DEFAULT_INPUTRC; fall back to SYS_INPUTRC on failure if (_rl_read_init_file(filename, 0) == 0) return 0 end filename = SYS_INPUTRC end if RUBY_PLATFORM =~ /mswin|mingw/ return 0 if (_rl_read_init_file(filename, 0) == 0) filename = "~/_inputrc" end return (_rl_read_init_file(filename, 0)) =end # # This code is too problematic at the moment # Just hardcode things and move on # return 0 end def _rl_read_init_file(filename, include_level) @current_readline_init_file = filename @current_readline_init_include_level = include_level openname = File.expand_path(filename) begin buffer = File.open(openname).read rescue return -1 end if (include_level == 0 && filename != @last_readline_init_file) @last_readline_init_file = filename.dup end @currently_reading_init_file = true # Loop over the lines in the file. Lines that start with `#' are # comments; all other lines are commands for readline initialization. @current_readline_init_lineno = 1 buffer.each_line do |line| line.strip! next if line =~ /^#/ next if line == '' rl_parse_and_bind(line) end return 0 end # Push _rl_parsing_conditionalized_out, and set parser state based # on ARGS. def parser_if(args) # Push parser state. @if_stack << @_rl_parsing_conditionalized_out # If parsing is turned off, then nothing can turn it back on except # for finding the matching endif. In that case, return right now. if @_rl_parsing_conditionalized_out return 0 end args.downcase! # Handle "$if term=foo" and "$if mode=emacs" constructs. If this # isn't term=foo, or mode=emacs, then check to see if the first # word in ARGS is the same as the value stored in rl_readline_name. if (@rl_terminal_name && args =~ /^term=/) # Terminals like "aaa-60" are equivalent to "aaa". tname = @rl_terminal_name.downcase.gsub(/-.*$/,'') # Test the `long' and `short' forms of the terminal name so that #if someone has a `sun-cmd' and does not want to have bindings #that will be executed if the terminal is a `sun', they can put #`$if term=sun-cmd' into their .inputrc. @_rl_parsing_conditionalized_out = (args[5..-1] != tname && args[5..-1] != @rl_terminal_name.downcase) elsif args =~ /^mode=/ if args[5..-1] == "emacs" mode = @emacs_mode elsif args[5..-1] == "vi" $stderr.puts "*** Warning: vi-mode not supported, switching back to emacs mode" mode = @emacs_mode else mode = @no_mode end @_rl_parsing_conditionalized_out = (mode != @rl_editing_mode) # Check to see if the first word in ARGS is the same as the # value stored in rl_readline_name. elsif (args == @rl_readline_name) @_rl_parsing_conditionalized_out = false else @_rl_parsing_conditionalized_out = true end return 0 end # Invert the current parser state if there is anything on the stack. def parser_else(args) if @if_stack.empty? #_rl_init_file_error ("$else found without matching $if") return 0 end # Check the previous (n) levels of the stack to make sure that # we haven't previously turned off parsing. return 0 if @if_stack.detect {|x| x } # Invert the state of parsing if at top level. @_rl_parsing_conditionalized_out = !@_rl_parsing_conditionalized_out return 0 end # Terminate a conditional, popping the value of # _rl_parsing_conditionalized_out from the stack. def parser_endif(args) if (@if_stack.length>0) @_rl_parsing_conditionalized_out = @if_stack.pop else #_rl_init_file_error ("$endif without matching $if") end 0 end def parser_include(args) return 0 if (@_rl_parsing_conditionalized_out) old_init_file = @current_readline_init_file old_line_number = @current_readline_init_lineno old_include_level = @current_readline_init_include_level r = _rl_read_init_file(args, old_include_level + 1) @current_readline_init_file = old_init_file @current_readline_init_lineno = old_line_number @current_readline_init_include_level = old_include_level return r end # Handle a parser directive. STATEMENT is the line of the directive # without any leading `$'. def handle_parser_directive(statement) directive,args = statement.split(' ') case directive.downcase when "if" parser_if(args) return 0 when "endif" parser_endif(args) return 0 when "else" parser_else(args) return 0 when "include" parser_include(args) return 0 end #_rl_init_file_error("unknown parser directive") return 1 end def rl_variable_bind(name,value) case name when "bind-tty-special-chars" @_rl_bind_stty_chars = value.nil? || value=='1' || value == 'on' when "blink-matching-paren" @rl_blink_matching_paren = value.nil? || value=='1' || value == 'on' when "byte-oriented" @rl_byte_oriented = value.nil? || value=='1' || value == 'on' when "completion-ignore-case" @_rl_completion_case_fold = value.nil? || value=='1' || value == 'on' when "convert-meta" @_rl_convert_meta_chars_to_ascii = value.nil? || value=='1' || value == 'on' when "disable-completion" @rl_inhibit_completion = value.nil? || value=='1' || value == 'on' when "enable-keypad" @_rl_enable_keypad = value.nil? || value=='1' || value == 'on' when "expand-tilde" @rl_complete_with_tilde_expansion = value.nil? || value=='1' || value == 'on' when "history-preserve-point" @_rl_history_preserve_point = value.nil? || value=='1' || value == 'on' when "horizontal-scroll-mode" @_rl_horizontal_scroll_mode = value.nil? || value=='1' || value == 'on' when "input-meta" @_rl_meta_flag = value.nil? || value=='1' || value == 'on' when "mark-directories" @_rl_complete_mark_directories = value.nil? || value=='1' || value == 'on' when "mark-modified-lines" @_rl_mark_modified_lines = value.nil? || value=='1' || value == 'on' when "mark-symlinked-directories" @_rl_complete_mark_symlink_dirs = value.nil? || value=='1' || value == 'on' when "match-hidden-files" @_rl_match_hidden_files = value.nil? || value=='1' || value == 'on' when "meta-flag" @_rl_meta_flag = value.nil? || value=='1' || value == 'on' when "output-meta" @_rl_output_meta_chars = value.nil? || value=='1' || value == 'on' when "page-completions" @_rl_page_completions = value.nil? || value=='1' || value == 'on' when "prefer-visible-bell" @_rl_prefer_visible_bell = value.nil? || value=='1' || value == 'on' when "print-completions-horizontally" @_rl_print_completions_horizontally = value.nil? || value=='1' || value == 'on' when "show-all-if-ambiguous" @_rl_complete_show_all = value.nil? || value=='1' || value == 'on' when "show-all-if-unmodified" @_rl_complete_show_unmodified = value.nil? || value=='1' || value == 'on' when "visible-stats" @rl_visible_stats = value.nil? || value=='1' || value == 'on' when "bell-style" case value when "none","off" @_rl_bell_preference = NO_BELL when "audible", "on" @_rl_bell_preference = AUDIBLE_BELL when "visible" @_rl_bell_preference = VISIBLE_BELL else @_rl_bell_preference = AUDIBLE_BELL end when "comment-begin" @_rl_comment_begin = value.dup when "completion-query-items" @rl_completion_query_items = value.to_i when "editing-mode" case value when "vi" $stderr.puts "*** Warning: vi editing-mode not supported, switching back to emacs" #@_rl_keymap = @vi_insertion_keymap #@rl_editing_mode = @vi_mode @_rl_keymap = @emacs_standard_keymap @rl_editing_mode = @emacs_mode when "emacs" @_rl_keymap = @emacs_standard_keymap @rl_editing_mode = @emacs_mode end when "isearch-terminators" @_rl_isearch_terminators = instance_eval(value) when "keymap" case value when "emacs","emacs-standard","emacs-meta","emacs-ctlx" @_rl_keymap = @emacs_standard_keymap when "vi","vi-move","vi-command" @_rl_keymap = @vi_movement_keymap when "vi-insert" @_rl_keymap = @vi_insertion_keymap end end end def rl_named_function(name) case name when "accept-line" return :rl_newline when "arrow-key-prefix" return :rl_arrow_keys when "backward-delete-char" return :rl_rubout when "character-search" return :rl_char_search when "character-search-backward" return :rl_backward_char_search when "copy-region-as-kill" return :rl_copy_region_to_kill when "delete-char" return :rl_delete when "delete-char-or-list" return :rl_delete_or_show_completions when "forward-backward-delete-char" return :rl_rubout_or_delete when "kill-whole-line" return :rl_kill_full_line when "non-incremental-forward-search-history" return :rl_noninc_forward_search when "non-incremental-reverse-search-history" return :rl_noninc_reverse_search when "non-incremental-forward-search-history-again" return :rl_noninc_forward_search_again when "non-incremental-reverse-search-history-again" return :rl_noninc_reverse_search_again when "redraw-current-line" return :rl_refresh_line when "self-insert" return :rl_insert when "undo" return :rl_undo_command when "beginning-of-line" return :rl_beg_of_line else if name =~ /^[-a-z]+$/ return ('rl_'+name.gsub('-','_')).to_sym end end nil end # Bind KEY to FUNCTION. Returns non-zero if KEY is out of range. def rl_bind_key(key, function) @_rl_keymap[key] = function @rl_binding_keymap = @_rl_keymap 0 end # Read the binding command from STRING and perform it. # A key binding command looks like: Keyname: function-name\0, # a variable binding command looks like: set variable value. # A new-style keybinding looks like "\C-x\C-x": exchange-point-and-mark. def rl_parse_and_bind(string) # If this is a parser directive, act on it. if (string[0,1] == "$") handle_parser_directive(string[1..-1]) return 0 end # If we aren't supposed to be parsing right now, then we're done. return 0 if @_rl_parsing_conditionalized_out if string =~ /^set/i _,var,value = string.downcase.split(' ') rl_variable_bind(var, value) return 0 end if string =~ /"(.*)"\s*:\s*(.*)$/ key, funname = $1, $2 rl_bind_key(key, rl_named_function(funname)) end 0 end def _rl_enable_meta_key() if(@term_has_meta && @_rl_term_mm) @_rl_out_stream.write(@_rl_term_mm) end end def rl_set_keymap_from_edit_mode() if (@rl_editing_mode == @emacs_mode) @_rl_keymap = @emacs_standard_keymap elsif (@rl_editing_mode == @vi_mode) @_rl_keymap = @vi_insertion_keymap end end def rl_get_keymap_name_from_edit_mode() if (@rl_editing_mode == @emacs_mode) "emacs" elsif (@rl_editing_mode == @vi_mode) "vi" else "none" end end # Bind some common arrow key sequences in MAP. def bind_arrow_keys_internal(map) xkeymap = @_rl_keymap @_rl_keymap = map if RUBY_PLATFORM =~ /mswin|mingw/ rl_bind_keyseq_if_unbound("\340H", :rl_get_previous_history) # Up rl_bind_keyseq_if_unbound("\340P", :rl_get_next_history) # Down rl_bind_keyseq_if_unbound("\340M", :rl_forward_char) # Right rl_bind_keyseq_if_unbound("\340K", :rl_backward_char) # Left rl_bind_keyseq_if_unbound("\340G", :rl_beg_of_line) # Home rl_bind_keyseq_if_unbound("\340O", :rl_end_of_line) # End rl_bind_keyseq_if_unbound("\340s", :rl_backward_word) # Ctrl-Left rl_bind_keyseq_if_unbound("\340t", :rl_forward_word) # Ctrl-Right rl_bind_keyseq_if_unbound("\340S", :rl_delete) # Delete rl_bind_keyseq_if_unbound("\340R", :rl_overwrite_mode) # Insert else rl_bind_keyseq_if_unbound("\033[A", :rl_get_previous_history) rl_bind_keyseq_if_unbound("\033[B", :rl_get_next_history) rl_bind_keyseq_if_unbound("\033[C", :rl_forward_char) rl_bind_keyseq_if_unbound("\033[D", :rl_backward_char) rl_bind_keyseq_if_unbound("\033[H", :rl_beg_of_line) rl_bind_keyseq_if_unbound("\033[F", :rl_end_of_line) rl_bind_keyseq_if_unbound("\033OA", :rl_get_previous_history) rl_bind_keyseq_if_unbound("\033OB", :rl_get_next_history) rl_bind_keyseq_if_unbound("\033OC", :rl_forward_char) rl_bind_keyseq_if_unbound("\033OD", :rl_backward_char) rl_bind_keyseq_if_unbound("\033OH", :rl_beg_of_line) rl_bind_keyseq_if_unbound("\033OF", :rl_end_of_line) end @_rl_keymap = xkeymap end # Try and bind the common arrow key prefixes after giving termcap and # the inputrc file a chance to bind them and create `real' keymaps # for the arrow key prefix. def bind_arrow_keys() bind_arrow_keys_internal(@emacs_standard_keymap) bind_arrow_keys_internal(@vi_movement_keymap) bind_arrow_keys_internal(@vi_insertion_keymap) end # Initialize the entire state of the world. def readline_initialize_everything() # Set up input and output if they are not already set up. @rl_instream ||= $stdin @rl_outstream ||= $stdout # Bind _rl_in_stream and _rl_out_stream immediately. These values # may change, but they may also be used before readline_internal () # is called. @_rl_in_stream = @rl_instream @_rl_out_stream = @rl_outstream # Allocate data structures. @rl_line_buffer = "" # Initialize the terminal interface. @rl_terminal_name ||= ENV["TERM"] _rl_init_terminal_io(@rl_terminal_name) # Bind tty characters to readline functions. readline_default_bindings() # Decide whether we should automatically go into eight-bit mode. _rl_init_eightbit() # Read in the init file. rl_read_init_file(nil) # XXX if (@_rl_horizontal_scroll_mode && @_rl_term_autowrap) @_rl_screenwidth -= 1 @_rl_screenchars -= @_rl_screenheight end # Override the effect of any `set keymap' assignments in the # inputrc file. rl_set_keymap_from_edit_mode() # Try to bind a common arrow key prefix, if not already bound. bind_arrow_keys() # Enable the meta key, if this terminal has one. if @_rl_enable_meta _rl_enable_meta_key() end # If the completion parser's default word break characters haven't # been set yet, then do so now. @rl_completer_word_break_characters ||= @rl_basic_word_break_characters end def _rl_init_line_state() @rl_point = @rl_end = @rl_mark = 0 @rl_line_buffer = "" end # Set the history pointer back to the last entry in the history. def _rl_start_using_history() using_history() @_rl_saved_line_for_history = nil end def cr_faster(new, cur) (new + 1) < (cur - new) end #* _rl_last_c_pos is an absolute cursor position in multibyte locales and a # buffer index in others. This macro is used when deciding whether the # current cursor position is in the middle of a prompt string containing # invisible characters. def prompt_ending_index() if !@rl_byte_oriented @prompt_physical_chars else (@prompt_last_invisible+1) end end # Initialize the VISIBLE_LINE and INVISIBLE_LINE arrays, and their associated # arrays of line break markers. MINSIZE is the minimum size of VISIBLE_LINE # and INVISIBLE_LINE; if it is greater than LINE_SIZE, LINE_SIZE is # increased. If the lines have already been allocated, this ensures that # they can hold at least MINSIZE characters. def init_line_structures(minsize) if @invisible_line.nil? # initialize it if (@line_size < minsize) @line_size = minsize end @visible_line = 0.chr * @line_size @invisible_line = 0.chr * @line_size # 1.chr elsif (@line_size < minsize) # ensure it can hold MINSIZE chars @line_size *= 2 if (@line_size < minsize) @line_size = minsize end @visible_line << 0.chr * (@line_size - @visible_line.length) @invisible_line << 1.chr * (@line_size - @invisible_line.length) end @visible_line[minsize,@line_size-minsize] = 0.chr * (@line_size-minsize) @invisible_line[minsize,@line_size-minsize] = 1.chr * (@line_size-minsize) if @vis_lbreaks.nil? @inv_lbreaks = [] @vis_lbreaks = [] @_rl_wrapped_line = [] @inv_lbreaks[0] = @vis_lbreaks[0] = 0 end end # Return the history entry at the current position, as determined by # history_offset. If there is no entry there, return a NULL pointer. def current_history() return ((@history_offset == @history_length) || @the_history.nil?) ? nil : @the_history[@history_offset] end def meta_char(c) c > "\x7f" && c <= "\xff" end def ctrl_char(c) c < "\x20" end def isprint(c) c >= "\x20" && c < "\x7f" end def whitespace(c) (c == ' ' || c == "\t") end def w_offset(line, offset) ((line) == 0 ? offset : 0) end def vis_llen(l) ((l) > @_rl_vis_botlin ? 0 : (@vis_lbreaks[l+1] - @vis_lbreaks[l])) end def inv_llen(l) (@inv_lbreaks[l+1] - @inv_lbreaks[l]) end def vis_chars(line) @visible_line[@vis_lbreaks[line] .. -1] end def vis_pos(line) @vis_lbreaks[line] end def vis_line(line) ((line) > @_rl_vis_botlin) ? "" : vis_chars(line) end def inv_line(line) @invisible_line[@inv_lbreaks[line] .. -1] end def m_offset(margin, offset) ((margin) == 0 ? offset : 0) end # PWP: update_line() is based on finding the middle difference of each # line on the screen; vis: # # /old first difference # /beginning of line | /old last same /old EOL # v v v v # old: eddie> Oh, my little gruntle-buggy is to me, as lurgid as # new: eddie> Oh, my little buggy says to me, as lurgid as # ^ ^ ^ ^ # \beginning of line | \new last same \new end of line # \new first difference # # All are character pointers for the sake of speed. Special cases for # no differences, as well as for end of line additions must be handled. # # Could be made even smarter, but this works well enough def update_line(old, ostart, new, current_line, omax, nmax, inv_botlin) # If we're at the right edge of a terminal that supports xn, we're # ready to wrap around, so do so. This fixes problems with knowing # the exact cursor position and cut-and-paste with certain terminal # emulators. In this calculation, TEMP is the physical screen # position of the cursor. if @encoding == 'X' old.force_encoding('ASCII-8BIT') new.force_encoding('ASCII-8BIT') end if !@rl_byte_oriented temp = @_rl_last_c_pos else temp = @_rl_last_c_pos - w_offset(@_rl_last_v_pos, @visible_wrap_offset) end if (temp == @_rl_screenwidth && @_rl_term_autowrap && !@_rl_horizontal_scroll_mode && @_rl_last_v_pos == current_line - 1) if (!@rl_byte_oriented) # This fixes only double-column characters, but if the wrapped # character comsumes more than three columns, spaces will be # inserted in the string buffer. if (@_rl_wrapped_line[current_line] > 0) _rl_clear_to_eol(@_rl_wrapped_line[current_line]) end if new[0,1] != 0.chr case @encoding when 'E' wc = new.scan(/./me)[0] ret = wc.length tempwidth = wc.length when 'S' wc = new.scan(/./ms)[0] ret = wc.length tempwidth = wc.length when 'U' wc = new.scan(/./mu)[0] ret = wc.length tempwidth = wc.unpack('U').first >= 0x1000 ? 2 : 1 when 'X' wc = new[0..-1].force_encoding(@encoding_name)[0] ret = wc.bytesize tempwidth = wc.ord >= 0x1000 ? 2 : 1 else ret = 1 tempwidth = 1 end else tempwidth = 0 end if (tempwidth > 0) bytes = ret @rl_outstream.write(new[0,bytes]) @_rl_last_c_pos = tempwidth @_rl_last_v_pos+=1 if old[ostart,1] != 0.chr case @encoding when 'E' wc = old[ostart..-1].scan(/./me)[0] ret = wc.length when 'S' wc = old[ostart..-1].scan(/./ms)[0] ret = wc.length when 'U' wc = old[ostart..-1].scan(/./mu)[0] ret = wc.length when 'X' wc = old[ostart..-1].force_encoding(@encoding_name)[0] ret = wc.bytesize end else ret = 0 end if (ret != 0 && bytes != 0) if ret != bytes len = old[ostart..-1].index(0.chr,ret) old[ostart+bytes,len-ret] = old[ostart+ret,len-ret] end old[ostart,bytes] = new[0,bytes] end else @rl_outstream.write(' ') @_rl_last_c_pos = 1 @_rl_last_v_pos+=1 if (old[ostart,1] != 0.chr && new[0,1] != 0.chr) old[ostart,1] = new[0,1] end end else if (new[0,1] != 0.chr) @rl_outstream.write(new[0,1]) else @rl_outstream.write(' ') end @_rl_last_c_pos = 1 @_rl_last_v_pos+=1 if (old[ostart,1] != 0.chr && new[0,1] != 0.chr) old[ostart,1] = new[0,1] end end end # Find first difference. if (!@rl_byte_oriented) # See if the old line is a subset of the new line, so that the # only change is adding characters. if (index = old.index(0.chr)) && omax+ostart>index omax = index - ostart end if (index = new.index(0.chr)) && nmax>index nmax = index end temp = (omax < nmax) ? omax : nmax if old[ostart,temp]==new[0,temp] ofd = temp nfd = temp else if (omax == nmax && new[0,omax]==old[ostart,omax]) ofd = omax nfd = nmax else new_offset = 0 old_offset = ostart ofd = 0 nfd = 0 while(ofd < omax && old[ostart+ofd,1] != 0.chr && _rl_compare_chars(old, old_offset, new, new_offset)) old_offset = _rl_find_next_mbchar(old, old_offset, 1, MB_FIND_ANY) new_offset = _rl_find_next_mbchar(new, new_offset, 1, MB_FIND_ANY) ofd = old_offset - ostart nfd = new_offset end end end else ofd = 0 nfd = 0 while(ofd < omax && old[ostart+ofd,1] != 0.chr && old[ostart+ofd,1] == new[nfd,1]) ofd += 1 nfd += 1 end end # Move to the end of the screen line. ND and OD are used to keep track # of the distance between ne and new and oe and old, respectively, to # move a subtraction out of each loop. oe = old.index(0.chr,ostart+ofd) - ostart if oe.nil? || oe>omax oe = omax end ne = new.index(0.chr,nfd) if ne.nil? || ne>omax ne = nmax end # If no difference, continue to next line. if (ofd == oe && nfd == ne) return end wsatend = true # flag for trailing whitespace if (!@rl_byte_oriented) ols = _rl_find_prev_mbchar(old, ostart+oe, MB_FIND_ANY) - ostart nls = _rl_find_prev_mbchar(new, ne, MB_FIND_ANY) while ((ols > ofd) && (nls > nfd)) if (!_rl_compare_chars(old, ostart+ols, new, nls)) break end if (old[ostart+ols,1] == " ") wsatend = false end ols = _rl_find_prev_mbchar(old, ols+ostart, MB_FIND_ANY) - ostart nls = _rl_find_prev_mbchar(new, nls, MB_FIND_ANY) end else ols = oe - 1 # find last same nls = ne - 1 while ((ols > ofd) && (nls > nfd) && old[ostart+ols,1] == new[nls,1]) if (old[ostart+ols,1] != " ") wsatend = false end ols-=1 nls-=1 end end if (wsatend) ols = oe nls = ne elsif (!_rl_compare_chars(old, ostart+ols, new, nls)) if (old[ostart+ols,1] != 0.chr) # don't step past the NUL if !@rl_byte_oriented ols = _rl_find_next_mbchar(old, ostart+ols, 1, MB_FIND_ANY) - ostart else ols+=1 end end if (new[nls,1] != 0.chr ) if !@rl_byte_oriented nls = _rl_find_next_mbchar(new, nls, 1, MB_FIND_ANY) else nls+=1 end end end # count of invisible characters in the current invisible line. current_invis_chars = w_offset(current_line, @wrap_offset) if (@_rl_last_v_pos != current_line) _rl_move_vert(current_line) if (@rl_byte_oriented && current_line == 0 && @visible_wrap_offset!=0) @_rl_last_c_pos += @visible_wrap_offset end end # If this is the first line and there are invisible characters in the # prompt string, and the prompt string has not changed, and the current # cursor position is before the last invisible character in the prompt, # and the index of the character to move to is past the end of the prompt # string, then redraw the entire prompt string. We can only do this # reliably if the terminal supports a `cr' capability. # This is not an efficiency hack -- there is a problem with redrawing # portions of the prompt string if they contain terminal escape # sequences (like drawing the `unbold' sequence without a corresponding # `bold') that manifests itself on certain terminals. lendiff = @local_prompt_len if (current_line == 0 && !@_rl_horizontal_scroll_mode && @_rl_term_cr && lendiff > @prompt_visible_length && @_rl_last_c_pos > 0 && ofd >= lendiff && @_rl_last_c_pos < prompt_ending_index()) @rl_outstream.write(@_rl_term_cr) _rl_output_some_chars(@local_prompt,0,lendiff) if !@rl_byte_oriented # We take wrap_offset into account here so we can pass correct # information to _rl_move_cursor_relative. @_rl_last_c_pos = _rl_col_width(@local_prompt, 0, lendiff) - @wrap_offset @cpos_adjusted = true else @_rl_last_c_pos = lendiff end end # When this function returns, _rl_last_c_pos is correct, and an absolute # cursor postion in multibyte mode, but a buffer index when not in a # multibyte locale. _rl_move_cursor_relative(ofd, old, ostart) if (current_line == 0 && !@rl_byte_oriented && @_rl_last_c_pos == @prompt_physical_chars) @cpos_adjusted = true end # if (len (new) > len (old)) # lendiff == difference in buffer # col_lendiff == difference on screen # When not using multibyte characters, these are equal lendiff = (nls - nfd) - (ols - ofd) if !@rl_byte_oriented col_lendiff = _rl_col_width(new, nfd, nls) - _rl_col_width(old, ostart+ofd, ostart+ols) else col_lendiff = lendiff end # If we are changing the number of invisible characters in a line, and # the spot of first difference is before the end of the invisible chars, # lendiff needs to be adjusted. if (current_line == 0 && !@_rl_horizontal_scroll_mode && current_invis_chars != @visible_wrap_offset) if !@rl_byte_oriented lendiff += @visible_wrap_offset - current_invis_chars col_lendiff += @visible_wrap_offset - current_invis_chars else lendiff += @visible_wrap_offset - current_invis_chars col_lendiff = lendiff end end # Insert (diff (len (old), len (new)) ch. temp = ne - nfd if !@rl_byte_oriented col_temp = _rl_col_width(new,nfd,ne) else col_temp = temp end if (col_lendiff > 0) # XXX - was lendiff # Non-zero if we're increasing the number of lines. gl = current_line >= @_rl_vis_botlin && inv_botlin > @_rl_vis_botlin # Sometimes it is cheaper to print the characters rather than # use the terminal's capabilities. If we're growing the number # of lines, make sure we actually cause the new line to wrap # around on auto-wrapping terminals. if (@_rl_terminal_can_insert && ((2 * col_temp) >= col_lendiff || @_rl_term_IC) && (!@_rl_term_autowrap || !gl)) # If lendiff > prompt_visible_length and _rl_last_c_pos == 0 and # _rl_horizontal_scroll_mode == 1, inserting the characters with # _rl_term_IC or _rl_term_ic will screw up the screen because of the # invisible characters. We need to just draw them. if (old[ostart+ols,1] != 0.chr && (!@_rl_horizontal_scroll_mode || @_rl_last_c_pos > 0 || lendiff <= @prompt_visible_length || current_invis_chars==0)) insert_some_chars(new[nfd..-1], lendiff, col_lendiff) @_rl_last_c_pos += col_lendiff elsif ((@rl_byte_oriented) && old[ostart+ols,1] == 0.chr && lendiff > 0) # At the end of a line the characters do not have to # be "inserted". They can just be placed on the screen. # However, this screws up the rest of this block, which # assumes you've done the insert because you can. _rl_output_some_chars(new,nfd, lendiff) @_rl_last_c_pos += col_lendiff else # We have horizontal scrolling and we are not inserting at # the end. We have invisible characters in this line. This # is a dumb update. _rl_output_some_chars(new,nfd, temp) @_rl_last_c_pos += col_temp return end # Copy (new) chars to screen from first diff to last match. temp = nls - nfd if ((temp - lendiff) > 0) _rl_output_some_chars(new,(nfd + lendiff),temp - lendiff) # XXX -- this bears closer inspection. Fixes a redisplay bug # reported against bash-3.0-alpha by Andreas Schwab involving # multibyte characters and prompt strings with invisible # characters, but was previously disabled. @_rl_last_c_pos += _rl_col_width(new,nfd+lendiff, nfd+lendiff+temp-col_lendiff) end else # cannot insert chars, write to EOL _rl_output_some_chars(new,nfd, temp) @_rl_last_c_pos += col_temp # If we're in a multibyte locale and were before the last invisible # char in the current line (which implies we just output some invisible # characters) we need to adjust _rl_last_c_pos, since it represents # a physical character position. end else # Delete characters from line. # If possible and inexpensive to use terminal deletion, then do so. if (@_rl_term_dc && (2 * col_temp) >= -col_lendiff) # If all we're doing is erasing the invisible characters in the # prompt string, don't bother. It screws up the assumptions # about what's on the screen. if (@_rl_horizontal_scroll_mode && @_rl_last_c_pos == 0 && -lendiff == @visible_wrap_offset) col_lendiff = 0 end if (col_lendiff!=0) delete_chars(-col_lendiff) # delete (diff) characters end # Copy (new) chars to screen from first diff to last match temp = nls - nfd if (temp > 0) _rl_output_some_chars(new,nfd, temp) @_rl_last_c_pos += _rl_col_width(new,nfd,nfd+temp) end # Otherwise, print over the existing material. else if (temp > 0) _rl_output_some_chars(new,nfd, temp) @_rl_last_c_pos += col_temp # XXX end lendiff = (oe) - (ne) if !@rl_byte_oriented col_lendiff = _rl_col_width(old, ostart, ostart+oe) - _rl_col_width(new, 0, ne) else col_lendiff = lendiff end if (col_lendiff!=0) if (@_rl_term_autowrap && current_line < inv_botlin) space_to_eol(col_lendiff) else _rl_clear_to_eol(col_lendiff) end end end end end # Basic redisplay algorithm. def rl_redisplay() return if !@readline_echoing_p _rl_wrapped_multicolumn = 0 @rl_display_prompt ||= "" if (@invisible_line.nil? || @vis_lbreaks.nil?) init_line_structures(0) rl_on_new_line() end # Draw the line into the buffer. @cpos_buffer_position = -1 line = @invisible_line out = inv_botlin = 0 # Mark the line as modified or not. We only do this for history # lines. modmark = 0 if (@_rl_mark_modified_lines && current_history() && @rl_undo_list) line[out,1] = '*' out += 1 line[out,1] = 0.chr modmark = 1 end # If someone thought that the redisplay was handled, but the currently # visible line has a different modification state than the one about # to become visible, then correct the caller's misconception. if (@visible_line[0,1] != @invisible_line[0,1]) @rl_display_fixed = false end # If the prompt to be displayed is the `primary' readline prompt (the # one passed to readline()), use the values we have already expanded. # If not, use what's already in rl_display_prompt. WRAP_OFFSET is the # number of non-visible characters in the prompt string. if (@rl_display_prompt == @rl_prompt || @local_prompt) if (@local_prompt_prefix && @forced_display) _rl_output_some_chars(@local_prompt_prefix,0,@local_prompt_prefix.length) end if (@local_prompt_len > 0) temp = @local_prompt_len + out + 2 if (temp >= @line_size) @line_size = (temp + 1024) - (temp % 1024) if @visible_line.length >= @line_size @visible_line = @visible_line[0,@line_size] else @visible_line += 0.chr * (@line_size-@visible_line.length) end if @invisible_line.length >= @line_size @invisible_line = @invisible_line[0,@line_size] else @invisible_line += 0.chr * (@line_size-@invisible_line.length) end if @encoding=='X' @visible_line.force_encoding('ASCII-8BIT') @invisible_line.force_encoding('ASCII-8BIT') end line = @invisible_line end line[out,@local_prompt_len] = @local_prompt out += @local_prompt_len end line[out,1] = 0.chr @wrap_offset = @local_prompt_len - @prompt_visible_length else prompt_this_line = @rl_display_prompt.rindex("\n") if prompt_this_line.nil? prompt_this_line = 0 else prompt_this_line+=1 pmtlen = prompt_this_line # temp var if (@forced_display) _rl_output_some_chars(@rl_display_prompt,0,pmtlen) # Make sure we are at column zero even after a newline, #regardless of the state of terminal output processing. if (pmtlen < 2 || @rl_display_prompt[prompt_this_line-2,1] != "\r") cr() end end end @prompt_physical_chars = pmtlen = @rl_display_prompt.length - prompt_this_line temp = pmtlen + out + 2 if (temp >= @line_size) @line_size = (temp + 1024) - (temp % 1024) if @visible_line.length >= @line_size @visible_line = @visible_line[0,@line_size] else @visible_line += 0.chr * (@line_size-@visible_line.length) end if @invisible_line.length >= @line_size @invisible_line = @invisible_line[0,@line_size] else @invisible_line += 0.chr * (@line_size-@invisible_line.length) end if @encoding=='X' @visible_line.force_encoding('ASCII-8BIT') @invisible_line.force_encoding('ASCII-8BIT') end line = @invisible_line end line[out,pmtlen] = @rl_display_prompt[prompt_this_line,pmtlen] out += pmtlen line[out,1] = 0.chr @wrap_offset = @prompt_invis_chars_first_line = 0 end # inv_lbreaks[i] is where line i starts in the buffer. @inv_lbreaks[newlines = 0] = 0 lpos = @prompt_physical_chars + modmark @_rl_wrapped_line = Array.new(@visible_line.length,0) num = 0 # prompt_invis_chars_first_line is the number of invisible characters in # the first physical line of the prompt. # wrap_offset - prompt_invis_chars_first_line is the number of invis # chars on the second line. # what if lpos is already >= _rl_screenwidth before we start drawing the # contents of the command line? while (lpos >= @_rl_screenwidth) # fix from Darin Johnson for prompt string with # invisible characters that is longer than the screen width. The # prompt_invis_chars_first_line variable could be made into an array # saying how many invisible characters there are per line, but that's # probably too much work for the benefit gained. How many people have # prompts that exceed two physical lines? # Additional logic fix from Edward Catmur if (!@rl_byte_oriented) n0 = num temp = @local_prompt_len while (num < temp) z = _rl_col_width(@local_prompt, n0, num) if (z > @_rl_screenwidth) num = _rl_find_prev_mbchar(@local_prompt, num, MB_FIND_ANY) break elsif (z == @_rl_screenwidth) break end num+=1 end temp = num else temp = ((newlines + 1) * @_rl_screenwidth) end # Now account for invisible characters in the current line. temp += (@local_prompt_prefix.nil? ? ((newlines == 0) ? @prompt_invis_chars_first_line : ((newlines == 1) ? @wrap_offset : 0)) : ((newlines == 0) ? @wrap_offset : 0)) @inv_lbreaks[newlines+=1] = temp if !@rl_byte_oriented lpos -= _rl_col_width(@local_prompt, n0, num) else lpos -= @_rl_screenwidth end end @prompt_last_screen_line = newlines # Draw the rest of the line (after the prompt) into invisible_line, keeping # track of where the cursor is (cpos_buffer_position), the number of the line containing # the cursor (lb_linenum), the last line number (lb_botlin and inv_botlin). # It maintains an array of line breaks for display (inv_lbreaks). # This handles expanding tabs for display and displaying meta characters. lb_linenum = 0 _in = 0 if !@rl_byte_oriented && @rl_end>0 case @encoding when 'E' wc = @rl_line_buffer[0,@rl_end].scan(/./me)[0] wc_bytes = wc ? wc.length : 1 when 'S' wc = @rl_line_buffer[0,@rl_end].scan(/./ms)[0] wc_bytes = wc ? wc.length : 1 when 'U' wc = @rl_line_buffer[0,@rl_end].scan(/./mu)[0] wc_bytes = wc ? wc.length : 1 when 'X' wc = @rl_line_buffer[0,@rl_end].force_encoding(@encoding_name)[0] wc_bytes = wc ? wc.bytesize : 1 end else wc_bytes = 1 end while(_in < @rl_end) c = @rl_line_buffer[_in,1] if(c == 0.chr) @rl_end = _in break end if (!@rl_byte_oriented) case @encoding when 'U' wc_width = wc && wc.unpack('U').first >= 0x1000 ? 2 : 1 when 'X' wc_width = wc && wc.ord > 0x1000 ? 2 : 1 else wc_width = wc ? wc.length : 1 end end if (out + 8 >= @line_size) # XXX - 8 for \t @line_size *= 2 if @visible_line.length>=@line_size @visible_line = @visible_line[0,@line_size] else @visible_line += 0.chr * (@line_size-@visible_line.length) end if @invisible_line.length>=@line_size @invisible_line = @invisible_line[0,@line_size] else @invisible_line += 0.chr * (@line_size-@invisible_line.length) end line = @invisible_line end if (_in == @rl_point) @cpos_buffer_position = out lb_linenum = newlines end if (false && meta_char(c)) if (!@_rl_output_meta_chars && false) line[out,4] = "\\%03o" % c.ord if (lpos + 4 >= @_rl_screenwidth) temp = @_rl_screenwidth - lpos @inv_lbreaks[newlines+=1] = out + temp lpos = 4 - temp else lpos += 4 end out += 4 else line[out,1] = c out += 1 lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end end elsif (c == "\t") newout = out + 8 - lpos % 8 temp = newout - out if (lpos + temp >= @_rl_screenwidth) temp2 = @_rl_screenwidth - lpos @inv_lbreaks[newlines+=1] = out + temp2 lpos = temp - temp2 while (out < newout) line[out,1] = ' ' out += 1 end else while (out < newout) line[out,1] = ' ' out += 1 end lpos += temp end elsif (c == "\n" && !@_rl_horizontal_scroll_mode && @_rl_term_up) line[out,1] = 0.chr # XXX - sentinel out += 1 @inv_lbreaks[newlines+=1] = out lpos = 0 elsif (ctrl_char(c) || c == RUBOUT) line[out,1] = '^' out += 1 lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end # NOTE: c[0].ord works identically on both 1.8 and 1.9 line[out,1] = ctrl_char(c) ? (c[0].ord|0x40).chr.upcase : '?' out += 1 lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end else if (!@rl_byte_oriented) _rl_wrapped_multicolumn = 0 if (@_rl_screenwidth < lpos + wc_width) for i in lpos ... @_rl_screenwidth # The space will be removed in update_line() line[out,1] = ' ' out += 1 _rl_wrapped_multicolumn+=1 lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end end end if (_in == @rl_point) @cpos_buffer_position = out lb_linenum = newlines end line[out,wc_bytes] = @rl_line_buffer[_in,wc_bytes] out += wc_bytes for i in 0 ... wc_width lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end end else line[out,1] = c out += 1 lpos+=1 if (lpos >= @_rl_screenwidth) @inv_lbreaks[newlines+=1] = out @_rl_wrapped_line[newlines] = _rl_wrapped_multicolumn lpos = 0 end end end if (!@rl_byte_oriented) _in += wc_bytes case @encoding when 'E' wc = @rl_line_buffer[_in,@rl_end - _in].scan(/./me)[0] wc_bytes = wc ? wc.length : 1 when 'S' wc = @rl_line_buffer[_in,@rl_end - _in].scan(/./ms)[0] wc_bytes = wc ? wc.length : 1 when 'U' wc = @rl_line_buffer[_in,@rl_end - _in].scan(/./mu)[0] wc_bytes = wc ? wc.length : 1 when 'X' wc = @rl_line_buffer[_in,@rl_end - _in].force_encoding(@encoding_name)[0] wc_bytes = wc ? wc.bytesize : 1 end else _in+=1 end end line[out,1] = 0.chr if (@cpos_buffer_position < 0) @cpos_buffer_position = out lb_linenum = newlines end inv_botlin = lb_botlin = newlines @inv_lbreaks[newlines+1] = out cursor_linenum = lb_linenum # CPOS_BUFFER_POSITION == position in buffer where cursor should be placed. # CURSOR_LINENUM == line number where the cursor should be placed. # PWP: now is when things get a bit hairy. The visible and invisible # line buffers are really multiple lines, which would wrap every # (screenwidth - 1) characters. Go through each in turn, finding # the changed region and updating it. The line order is top to bottom. # If we can move the cursor up and down, then use multiple lines, # otherwise, let long lines display in a single terminal line, and # horizontally scroll it. if (!@_rl_horizontal_scroll_mode && @_rl_term_up) if (!@rl_display_fixed || @forced_display) @forced_display = false # If we have more than a screenful of material to display, then # only display a screenful. We should display the last screen, # not the first. if (out >= @_rl_screenchars) if (!@rl_byte_oriented) out = _rl_find_prev_mbchar(line, @_rl_screenchars, MB_FIND_ANY) else out = @_rl_screenchars - 1 end end # The first line is at character position 0 in the buffer. The # second and subsequent lines start at inv_lbreaks[N], offset by # OFFSET (which has already been calculated above). # For each line in the buffer, do the updating display. for linenum in 0 .. inv_botlin # This can lead us astray if we execute a program that changes #the locale from a non-multibyte to a multibyte one. o_cpos = @_rl_last_c_pos @cpos_adjusted = false update_line(@visible_line,vis_pos(linenum), inv_line(linenum), linenum, vis_llen(linenum), inv_llen(linenum), inv_botlin) if (linenum == 0 && !@rl_byte_oriented && !@cpos_adjusted && @_rl_last_c_pos != o_cpos && @_rl_last_c_pos > @wrap_offset && o_cpos < @prompt_last_invisible) @_rl_last_c_pos -= @wrap_offset end # If this is the line with the prompt, we might need to # compensate for invisible characters in the new line. Do # this only if there is not more than one new line (which # implies that we completely overwrite the old visible line) # and the new line is shorter than the old. Make sure we are # at the end of the new line before clearing. if (linenum == 0 && inv_botlin == 0 && @_rl_last_c_pos == out && (@wrap_offset > @visible_wrap_offset) && (@_rl_last_c_pos < @visible_first_line_len)) if !@rl_byte_oriented nleft = @_rl_screenwidth - @_rl_last_c_pos else nleft = @_rl_screenwidth + @wrap_offset - @_rl_last_c_pos end if (nleft!=0) _rl_clear_to_eol(nleft) end end # Since the new first line is now visible, save its length. if (linenum == 0) @visible_first_line_len = (inv_botlin > 0) ? @inv_lbreaks[1] : out - @wrap_offset end end # We may have deleted some lines. If so, clear the left over # blank ones at the bottom out. if (@_rl_vis_botlin > inv_botlin) while(linenum <= @_rl_vis_botlin) tt = vis_chars(linenum) _rl_move_vert(linenum) _rl_move_cursor_relative(0, tt) _rl_clear_to_eol((linenum == @_rl_vis_botlin) ? tt.length : @_rl_screenwidth) linenum += 1 end end @_rl_vis_botlin = inv_botlin # CHANGED_SCREEN_LINE is set to 1 if we have moved to a # different screen line during this redisplay. changed_screen_line = @_rl_last_v_pos != cursor_linenum if (changed_screen_line) _rl_move_vert(cursor_linenum) # If we moved up to the line with the prompt using _rl_term_up, # the physical cursor position on the screen stays the same, # but the buffer position needs to be adjusted to account # for invisible characters. if (@rl_byte_oriented && cursor_linenum == 0 && @wrap_offset!=0) @_rl_last_c_pos += @wrap_offset end end # We have to reprint the prompt if it contains invisible # characters, since it's not generally OK to just reprint # the characters from the current cursor position. But we # only need to reprint it if the cursor is before the last # invisible character in the prompt string. nleft = @prompt_visible_length + @wrap_offset if (cursor_linenum == 0 && @wrap_offset > 0 && @_rl_last_c_pos > 0 && @_rl_last_c_pos < prompt_ending_index() && @local_prompt) if (@_rl_term_cr) @rl_outstream.write(@_rl_term_cr) end _rl_output_some_chars(@local_prompt,0,nleft) if !@rl_byte_oriented @_rl_last_c_pos = _rl_col_width(@local_prompt, 0, nleft) - @wrap_offset else @_rl_last_c_pos = nleft end end # Where on that line? And where does that line start # in the buffer? pos = @inv_lbreaks[cursor_linenum] # nleft == number of characters in the line buffer between the # start of the line and the desired cursor position. nleft = @cpos_buffer_position - pos # NLEFT is now a number of characters in a buffer. When in a # multibyte locale, however, _rl_last_c_pos is an absolute cursor # position that doesn't take invisible characters in the prompt # into account. We use a fudge factor to compensate. # Since _rl_backspace() doesn't know about invisible characters in the # prompt, and there's no good way to tell it, we compensate for # those characters here and call _rl_backspace() directly. if (@wrap_offset!=0 && cursor_linenum == 0 && nleft < @_rl_last_c_pos) # TX == new physical cursor position in multibyte locale. if !@rl_byte_oriented tx = _rl_col_width(@visible_line, pos, pos+nleft) - @visible_wrap_offset else tx = nleft end if (@_rl_last_c_pos > tx) _rl_backspace(@_rl_last_c_pos - tx) # XXX @_rl_last_c_pos = tx end end # We need to note that in a multibyte locale we are dealing with # _rl_last_c_pos as an absolute cursor position, but moving to a # point specified by a buffer position (NLEFT) that doesn't take # invisible characters into account. if !@rl_byte_oriented _rl_move_cursor_relative(nleft, @invisible_line,pos) elsif (nleft != @_rl_last_c_pos) _rl_move_cursor_relative(nleft, @invisible_line,pos) end end else # Do horizontal scrolling. # Always at top line. @_rl_last_v_pos = 0 # Compute where in the buffer the displayed line should start. This # will be LMARGIN. # The number of characters that will be displayed before the cursor. ndisp = @cpos_buffer_position - @wrap_offset nleft = @prompt_visible_length + @wrap_offset # Where the new cursor position will be on the screen. This can be # longer than SCREENWIDTH; if it is, lmargin will be adjusted. phys_c_pos = @cpos_buffer_position - (@last_lmargin!=0 ? @last_lmargin : @wrap_offset) t = @_rl_screenwidth / 3 # If the number of characters had already exceeded the screenwidth, #last_lmargin will be > 0. # If the number of characters to be displayed is more than the screen # width, compute the starting offset so that the cursor is about # two-thirds of the way across the screen. if (phys_c_pos > @_rl_screenwidth - 2) lmargin = @cpos_buffer_position - (2 * t) if (lmargin < 0) lmargin = 0 end # If the left margin would be in the middle of a prompt with # invisible characters, don't display the prompt at all. if (@wrap_offset!=0 && lmargin > 0 && lmargin < nleft) lmargin = nleft end elsif (ndisp < @_rl_screenwidth - 2) # XXX - was -1 lmargin = 0 elsif (phys_c_pos < 1) # If we are moving back towards the beginning of the line and # the last margin is no longer correct, compute a new one. lmargin = ((@cpos_buffer_position - 1) / t) * t # XXX if (@wrap_offset!=0 && lmargin > 0 && lmargin < nleft) lmargin = nleft end else lmargin = @last_lmargin end # If the first character on the screen isn't the first character #in the display line, indicate this with a special character. if (lmargin > 0) line[lmargin,1] = '<' end # If SCREENWIDTH characters starting at LMARGIN do not encompass # the whole line, indicate that with a special character at the # right edge of the screen. If LMARGIN is 0, we need to take the # wrap offset into account. t = lmargin + m_offset(lmargin, @wrap_offset) + @_rl_screenwidth if (t < out) line[t - 1,1] = '>' end if (!@rl_display_fixed || @forced_display || lmargin != @last_lmargin) @forced_display = false update_line(@visible_line,@last_lmargin,@invisible_line[lmargin..-1], 0, @_rl_screenwidth + @visible_wrap_offset, @_rl_screenwidth + (lmargin ? 0 : @wrap_offset), 0) # If the visible new line is shorter than the old, but the number # of invisible characters is greater, and we are at the end of # the new line, we need to clear to eol. t = @_rl_last_c_pos - m_offset(lmargin, @wrap_offset) if ((m_offset(lmargin, @wrap_offset) > @visible_wrap_offset) && (@_rl_last_c_pos == out) && t < @visible_first_line_len) nleft = @_rl_screenwidth - t _rl_clear_to_eol(nleft) end @visible_first_line_len = out - lmargin - m_offset(lmargin, @wrap_offset) if (@visible_first_line_len > @_rl_screenwidth) @visible_first_line_len = @_rl_screenwidth end _rl_move_cursor_relative(@cpos_buffer_position - lmargin, @invisible_line ,lmargin) @last_lmargin = lmargin end end @rl_outstream.flush # Swap visible and non-visible lines. @visible_line,@invisible_line = @invisible_line,@visible_line @vis_lbreaks,@inv_lbreaks = @inv_lbreaks,@vis_lbreaks @rl_display_fixed = false # If we are displaying on a single line, and last_lmargin is > 0, we # are not displaying any invisible characters, so set visible_wrap_offset # to 0. if (@_rl_horizontal_scroll_mode && @last_lmargin!=0) @visible_wrap_offset = 0 else @visible_wrap_offset = @wrap_offset end end # Tell the update routines that we have moved onto a new (empty) line. def rl_on_new_line() if (@visible_line) @visible_line[0,1] = 0.chr end @_rl_last_c_pos = @_rl_last_v_pos = 0 @_rl_vis_botlin = @last_lmargin = 0 if (@vis_lbreaks) @vis_lbreaks[0] = @vis_lbreaks[1] = 0 end @visible_wrap_offset = 0 0 end def rl_reset_line_state() rl_on_new_line() @rl_display_prompt = @rl_prompt ? @rl_prompt : "" @forced_display = true 0 end def _rl_vi_initialize_line rl_unsetstate(RL_STATE_VICMDONCE) end # Initialize readline (and terminal if not already). def rl_initialize() # If we have never been called before, initialize the # terminal and data structures. if (!@rl_initialized) rl_setstate(RL_STATE_INITIALIZING) readline_initialize_everything() rl_unsetstate(RL_STATE_INITIALIZING) @rl_initialized = true rl_setstate(RL_STATE_INITIALIZED) end # Initalize the current line information. _rl_init_line_state() # We aren't done yet. We haven't even gotten started yet! @rl_done = false rl_unsetstate(RL_STATE_DONE) # Tell the history routines what is going on. _rl_start_using_history() # Make the display buffer match the state of the line. rl_reset_line_state() # No such function typed yet. @rl_last_func = nil # Parsing of key-bindings begins in an enabled state. @_rl_parsing_conditionalized_out = 0 if (@rl_editing_mode == @vi_mode) _rl_vi_initialize_line() end # Each line starts in insert mode (the default). _rl_set_insert_mode(RL_IM_DEFAULT, 1) return 0 end def _rl_strip_prompt(pmt) return expand_prompt(pmt).first end def _rl_col_width(string,start,_end) return 0 if _end <= start index = string.index(0.chr) str = index ? string[0,index] : string width = 0 case @encoding when 'N' return (_end - start) when 'U' str[start ... _end].scan(/./mu).each {|s| width += s.unpack('U').first >= 0x1000 ? 2 : 1 } when 'S' str[start ... _end].scan(/./ms).each {|s| width += s.length } when 'E' str[start ... _end].scan(/./me).each {|s| width += s.length } when 'X' tmp = str[start ... _end] return 0 if not tmp tmp.force_encoding(@encoding_name).codepoints.each {|s| width += s > 0x1000 ? 2 : 1 } end width end # Write COUNT characters from STRING to the output stream. def _rl_output_some_chars(string,start,count) @_rl_out_stream.write(string[start,count]) end # Tell the update routines that we have moved onto a new line with the # prompt already displayed. Code originally from the version of readline # distributed with CLISP. rl_expand_prompt must have already been called # (explicitly or implicitly). This still doesn't work exactly right. def rl_on_new_line_with_prompt() # Initialize visible_line and invisible_line to ensure that they can hold # the already-displayed prompt. prompt_size = @rl_prompt.length + 1 init_line_structures(prompt_size) # Make sure the line structures hold the already-displayed prompt for # redisplay. lprompt = @local_prompt ? @local_prompt : @rl_prompt @visible_line[0,lprompt.length] = lprompt @invisible_line[0,lprompt.length] = lprompt # If the prompt contains newlines, take the last tail. prompt_last_line = rl_prompt.rindex("\n") if prompt_last_line.nil? prompt_last_line = @rl_prompt else prompt_last_line = @rl_prompt[prompt_last_line..-1] end l = prompt_last_line.length if !@rl_byte_oriented @_rl_last_c_pos = _rl_col_width(prompt_last_line, 0, l) else @_rl_last_c_pos = l end # Dissect prompt_last_line into screen lines. Note that here we have # to use the real screenwidth. Readline's notion of screenwidth might be # one less, see terminal.c. real_screenwidth = @_rl_screenwidth + (@_rl_term_autowrap ? 0 : 1) @_rl_last_v_pos = l / real_screenwidth # If the prompt length is a multiple of real_screenwidth, we don't know # whether the cursor is at the end of the last line, or already at the # beginning of the next line. Output a newline just to be safe. if (l > 0 && (l % real_screenwidth) == 0) _rl_output_some_chars("\n",0,1) end @last_lmargin = 0 newlines = 0 i = 0 while (i <= l) @_rl_vis_botlin = newlines @vis_lbreaks[newlines] = i newlines += 1 i += real_screenwidth end @vis_lbreaks[newlines] = l @visible_wrap_offset = 0 @rl_display_prompt = @rl_prompt # XXX - make sure it's set return 0 end def readline_internal_setup() @_rl_in_stream = @rl_instream @_rl_out_stream = @rl_outstream if (@rl_startup_hook) send(@rl_startup_hook) end # If we're not echoing, we still want to at least print a prompt, because # rl_redisplay will not do it for us. If the calling application has a # custom redisplay function, though, let that function handle it. if (!@readline_echoing_p && @rl_redisplay_function == :rl_redisplay) if (@rl_prompt && !@rl_already_prompted) nprompt = _rl_strip_prompt(@rl_prompt) @_rl_out_stream.write(nprompt) @_rl_out_stream.flush end else if (@rl_prompt && @rl_already_prompted) rl_on_new_line_with_prompt() else rl_on_new_line() end send(@rl_redisplay_function) end if (@rl_editing_mode == @vi_mode) rl_vi_insertion_mode(1, 'i') end if (@rl_pre_input_hook) send(@rl_pre_input_hook) end end # Create a default argument. def _rl_reset_argument() @rl_numeric_arg = @rl_arg_sign = 1 @rl_explicit_arg = false @_rl_argcxt = 0 end # Ring the terminal bell. def rl_ding() if @MessageBeep @MessageBeep.Call(0) elsif @readline_echoing_p if @_rl_bell_preference == VISIBLE_BELL if (@_rl_visible_bell) @_rl_out_stream.write(@_rl_visible_bell.chr) else $stderr.write("\007") $stderr.flush end elsif @_rl_bell_preference == AUDIBLE_BELL $stderr.write("\007") $stderr.flush end return 0 end return -1 end def _rl_search_getchar(cxt) # Read a key and decide how to proceed. rl_setstate(RL_STATE_MOREINPUT) c = cxt.lastc = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) if !@rl_byte_oriented cxt.mb = "" c = cxt.lastc = _rl_read_mbstring(cxt.lastc, cxt.mb, MB_LEN_MAX) end c end def endsrch_char(c) ((ctrl_char(c) || meta_char(c) || (c) == RUBOUT) && ((c) != "\C-G")) end def _rl_input_available IO.select([ $stdin ], nil, [ $stdin ], @_keyboard_input_timeout) end # Process just-read character C according to isearch context CXT. Return # -1 if the caller should just free the context and return, 0 if we should # break out of the loop, and 1 if we should continue to read characters. def _rl_isearch_dispatch(cxt, c) f = nil # Translate the keys we do something with to opcodes. if (c && @_rl_keymap[c]) f = @_rl_keymap[c] if (f == :rl_reverse_search_history) cxt.lastc = (cxt.sflags & SF_REVERSE)!=0 ? -1 : -2 elsif (f == :rl_forward_search_history) cxt.lastc = (cxt.sflags & SF_REVERSE)!=0 ? -2 : -1 elsif (f == :rl_rubout) cxt.lastc = -3 elsif (c == "\C-G") cxt.lastc = -4 elsif (c == "\C-W") # XXX cxt.lastc = -5 elsif (c == "\C-Y") # XXX cxt.lastc = -6 end end # The characters in isearch_terminators (set from the user-settable # variable isearch-terminators) are used to terminate the search but # not subsequently execute the character as a command. The default # value is "\033\012" (ESC and C-J). if (cxt.lastc.class == ::String and cxt.search_terminators.include?(cxt.lastc)) # ESC still terminates the search, but if there is pending #input or if input arrives within 0.1 seconds (on systems #with select(2)) it is used as a prefix character #with rl_execute_next. WATCH OUT FOR THIS! This is intended #to allow the arrow keys to be used like ^F and ^B are used #to terminate the search and execute the movement command. #XXX - since _rl_input_available depends on the application- #settable keyboard timeout value, this could alternatively #use _rl_input_queued(100000) if (cxt.lastc == ESC && _rl_input_available()) rl_execute_next(ESC) end return (0) end if !@rl_byte_oriented if (cxt.lastc.class == String && (cxt.mb.length == 1) && endsrch_char(cxt.lastc)) # This sets rl_pending_input to c; it will be picked up the next # time rl_read_key is called. rl_execute_next(cxt.lastc) return (0) end elsif (cxt.lastc.class == String && endsrch_char(cxt.lastc)) # This sets rl_pending_input to LASTC; it will be picked up the next # time rl_read_key is called. rl_execute_next(cxt.lastc) return (0) end # Now dispatch on the character. `Opcodes' affect the search string or # state. Other characters are added to the string. case (cxt.lastc) # search again when -1 if (cxt.search_string_index == 0) if (@last_isearch_string) cxt.search_string_size = 64 + @last_isearch_string_len cxt.search_string = @last_isearch_string.dup cxt.search_string_index = @last_isearch_string_len rl_display_search(cxt.search_string, (cxt.sflags & SF_REVERSE)!=0, -1) else return (1) end elsif (cxt.sflags & SF_REVERSE)!=0 cxt.sline_index-=1 elsif (cxt.sline_index != cxt.sline_len) cxt.sline_index+=1 else rl_ding() end # switch directions when -2 cxt.direction = -cxt.direction if (cxt.direction < 0) cxt.sflags |= SF_REVERSE else cxt.sflags &= ~SF_REVERSE end # delete character from search string. when -3 # C-H, DEL # This is tricky. To do this right, we need to keep a # stack of search positions for the current search, with # sentinels marking the beginning and end. But this will # do until we have a real isearch-undo. if (cxt.search_string_index == 0) rl_ding() else cxt.search_string_index -= 1 cxt.search_string.chop! end when -4 # C-G, abort rl_replace_line(cxt.lines[cxt.save_line], false) @rl_point = cxt.save_point @rl_mark = cxt.save_mark rl_restore_prompt() rl_clear_message() return -1 when -5 # C-W # skip over portion of line we already matched and yank word wstart = @rl_point + cxt.search_string_index if (wstart >= @rl_end) rl_ding() else # if not in a word, move to one. cval = _rl_char_value(@rl_line_buffer, wstart) if (!_rl_walphabetic(cval)) rl_ding() else if !@rl_byte_oriented n = _rl_find_next_mbchar(@rl_line_buffer, wstart, 1, MB_FIND_NONZERO) else n = wstart+1 end while (n < @rl_end) cval = _rl_char_value(@rl_line_buffer, n) break if !_rl_walphabetic(cval) if !@rl_byte_oriented n = _rl_find_next_mbchar(@rl_line_buffer, n, 1, MB_FIND_NONZERO) else n = n+1 end end wlen = n - wstart + 1 if (cxt.search_string_index + wlen + 1 >= cxt.search_string_size) cxt.search_string_size += wlen + 1 end cxt.search_string[cxt.search_string_index..-1] = @rl_line_buffer[wstart,wlen] cxt.search_string_index += wlen end end when -6 # C-Y # skip over portion of line we already matched and yank rest wstart = @rl_point + cxt.search_string_index if (wstart >= @rl_end) rl_ding() else n = @rl_end - wstart + 1 if (cxt.search_string_index + n + 1 >= cxt.search_string_size) cxt.search_string_size += n + 1 end cxt.search_string[cxt.search_string_index..-1] = @rl_line_buffer[wstart,n] end # Add character to search string and continue search. else if (cxt.search_string_index + 2 >= cxt.search_string_size) cxt.search_string_size += 128 end if !@rl_byte_oriented for j in 0 ... cxt.mb.length cxt.search_string << cxt.mb[j,1] cxt.search_string_index += 1 end else cxt.search_string << c cxt.search_string_index += 1 end end while (cxt.sflags &= ~(SF_FOUND|SF_FAILED))!=0 limit = cxt.sline_len - cxt.search_string_index + 1 # Search the current line. while ((cxt.sflags & SF_REVERSE)!=0 ? (cxt.sline_index >= 0) : (cxt.sline_index < limit)) if (cxt.search_string[0,cxt.search_string_index] == cxt.sline[cxt.sline_index,cxt.search_string_index]) cxt.sflags |= SF_FOUND break else cxt.sline_index += cxt.direction end end break if (cxt.sflags & SF_FOUND)!=0 # Move to the next line, but skip new copies of the line # we just found and lines shorter than the string we're # searching for. begin # Move to the next line. cxt.history_pos += cxt.direction # At limit for direction? if ((cxt.sflags & SF_REVERSE)!=0 ? (cxt.history_pos < 0) : (cxt.history_pos == cxt.hlen)) cxt.sflags |= SF_FAILED break end # We will need these later. cxt.sline = cxt.lines[cxt.history_pos] cxt.sline_len = cxt.sline.length end while ((cxt.prev_line_found && cxt.prev_line_found == cxt.lines[cxt.history_pos]) || (cxt.search_string_index > cxt.sline_len)) break if (cxt.sflags & SF_FAILED)!=0 # Now set up the line for searching... cxt.sline_index = (cxt.sflags & SF_REVERSE)!=0 ? cxt.sline_len - cxt.search_string_index : 0 end if (cxt.sflags & SF_FAILED)!=0 # We cannot find the search string. Ding the bell. rl_ding() cxt.history_pos = cxt.last_found_line return 1 end # We have found the search string. Just display it. But don't # actually move there in the history list until the user accepts # the location. if (cxt.sflags & SF_FOUND)!=0 cxt.prev_line_found = cxt.lines[cxt.history_pos] if (cxt.prev_line_found) rl_replace_line(cxt.lines[cxt.history_pos], false) end @rl_point = cxt.sline_index cxt.last_found_line = cxt.history_pos rl_display_search(cxt.search_string, (cxt.sflags & SF_REVERSE)!=0, (cxt.history_pos == cxt.save_line) ? -1 : cxt.history_pos) end 1 end # How to clear things from the "echo-area". def rl_clear_message() @rl_display_prompt = @rl_prompt if (@msg_saved_prompt) rl_restore_prompt() @msg_saved_prompt = nil end send(@rl_redisplay_function) 0 end def _rl_isearch_fini(cxt) # First put back the original state. @rl_line_buffer = cxt.lines[cxt.save_line].dup rl_restore_prompt() # Save the search string for possible later use. @last_isearch_string = cxt.search_string @last_isearch_string_len = cxt.search_string_index cxt.search_string = nil if (cxt.last_found_line < cxt.save_line) rl_get_previous_history(cxt.save_line - cxt.last_found_line, 0) else rl_get_next_history(cxt.last_found_line - cxt.save_line, 0) end # If the string was not found, put point at the end of the last matching # line. If last_found_line == orig_line, we didn't find any matching # history lines at all, so put point back in its original position. if (cxt.sline_index < 0) if (cxt.last_found_line == cxt.save_line) cxt.sline_index = cxt.save_point else cxt.sline_index = @rl_line_buffer.delete(0.chr).length end @rl_mark = cxt.save_mark end @rl_point = cxt.sline_index # Don't worry about where to put the mark here; rl_get_previous_history # and rl_get_next_history take care of it. rl_clear_message() end def _rl_isearch_cleanup(cxt, r) if (r >= 0) _rl_isearch_fini(cxt) end ctx = nil @_rl_iscxt = nil rl_unsetstate(RL_STATE_ISEARCH) r != 0 end # Do the command associated with KEY in MAP. # If the associated command is really a keymap, then read # another key, and dispatch into that map. def _rl_dispatch(key, map) @_rl_dispatching_keymap = map return _rl_dispatch_subseq(key, map, false) end def _rl_dispatch_subseq(key, map, got_subseq) func = map[key] if (func) @rl_executing_keymap = map @rl_dispatching = true rl_setstate(RL_STATE_DISPATCHING) send(map[key],@rl_numeric_arg * @rl_arg_sign, key) rl_unsetstate(RL_STATE_DISPATCHING) @rl_dispatching = false if (@rl_pending_input == 0 && map[key] != :rl_digit_argument) @rl_last_func = map[key] end else if(map.keys.detect{|x| x =~ /^#{Regexp.escape(key)}/}) key += _rl_subseq_getchar(key) return _rl_dispatch_subseq(key,map,got_subseq) elsif(key.length>1 && key[1].ord < 0x7f) _rl_abort_internal() return -1 else @rl_dispatching = true rl_setstate(RL_STATE_DISPATCHING) send(:rl_insert,@rl_numeric_arg * @rl_arg_sign, key) rl_unsetstate(RL_STATE_DISPATCHING) @rl_dispatching = false end end 0 end # Add KEY to the buffer of characters to be read. Returns 1 if the # character was stuffed correctly; 0 otherwise. def rl_stuff_char(key) return 0 if (ibuffer_space() == 0) if (key == EOF) key = NEWLINE @rl_pending_input = EOF rl_setstate(RL_STATE_INPUTPENDING) end @ibuffer[@push_index] = key @push_index += 1 if (@push_index >= @ibuffer_len) @push_index = 0 end return 1 end begin # Cygwin will look like Windows, but we want to treat it like a Posix OS: raise LoadError, "Cygwin is a Posix OS." if RUBY_PLATFORM =~ /\bcygwin\b/i # Try to use win32api regardless of version. This allows us to correctly # fall back to unixy stuff when not on Windows. Requires some testing on # 1.8 for Windows, but msf ships 1.9, so don't worry about it for now. #if RUBY_VERSION < '1.9.1' require 'Win32API' #else # require 'dl' # class Win32API # DLL = {} # TYPEMAP = {"0" => DL::TYPE_VOID, "S" => DL::TYPE_VOIDP, "I" => DL::TYPE_LONG} # # def initialize(dllname, func, import, export = "0", calltype = :stdcall) # @proto = [import].join.tr("VPpNnLlIi", "0SSI").sub(/^(.)0*$/, '\1') # handle = DLL[dllname] ||= DL.dlopen(dllname) # @func = DL::CFunc.new(handle[func], TYPEMAP[export.tr("VPpNnLlIi", "0SSI")], func, calltype) # end # # def call(*args) # import = @proto.split("") # args.each_with_index do |x, i| # args[i], = [x == 0 ? nil : x].pack("p").unpack("l!*") if import[i] == "S" # args[i], = [x].pack("I").unpack("i") if import[i] == "I" # end # ret, = @func.call(args) # return ret || 0 # end # # alias Call call # end #end STD_OUTPUT_HANDLE = -11 STD_INPUT_HANDLE = -10 KEY_EVENT = 1 VK_SHIFT = 0x10 VK_MENU = 0x12 VK_LMENU = 0xA4 VK_RMENU = 0xA5 LEFT_CTRL_PRESSED = 0x0008 RIGHT_CTRL_PRESSED = 0x0004 LEFT_ALT_PRESSED = 0x0002 RIGHT_ALT_PRESSED = 0x0001 @getch = Win32API.new("msvcrt", "_getch", [], 'I') @kbhit = Win32API.new("msvcrt", "_kbhit", [], 'I') @GetStdHandle = Win32API.new("kernel32","GetStdHandle",['L'],'L') @SetConsoleCursorPosition = Win32API.new("kernel32","SetConsoleCursorPosition",['L','L'],'L') @GetConsoleScreenBufferInfo = Win32API.new("kernel32","GetConsoleScreenBufferInfo",['L','P'],'L') @FillConsoleOutputCharacter = Win32API.new("kernel32","FillConsoleOutputCharacter",['L','L','L','L','P'],'L') @ReadConsoleInput = Win32API.new( "kernel32", "ReadConsoleInput", ['L', 'P', 'L', 'P'], 'L' ) @MessageBeep = Win32API.new("user32","MessageBeep",['L'],'L') @GetKeyboardState = Win32API.new("user32","GetKeyboardState",['P'],'L') @GetKeyState = Win32API.new("user32","GetKeyState",['L'],'L') @hConsoleHandle = @GetStdHandle.Call(STD_OUTPUT_HANDLE) @hConsoleInput = @GetStdHandle.Call(STD_INPUT_HANDLE) @pending_count = 0 @pending_key = nil begin case `chcp`.scan(/\d+$/).first.to_i when 936,949,950,51932,51936,50225 @encoding = "E" when 932,50220,50221,20222 @encoding = "S" when 65001 @encoding = "U" else @encoding = "N" end rescue @encoding = "N" end def rl_getc(stream) while (@kbhit.Call == 0) # If there is no input, yield the processor for other threads sleep(@_keyboard_input_timeout) end c = @getch.Call alt = (@GetKeyState.call(VK_LMENU) & 0x80) != 0 if c==0 || c==0xE0 while (@kbhit.Call == 0) # If there is no input, yield the processor for other threads sleep(@_keyboard_input_timeout) end r = c.chr + @getch.Call.chr else r = c.chr end r = "\e"+r if alt r end def rl_gather_tyi() chars_avail = @kbhit.Call return 0 if(chars_avail<=0) k = send(@rl_getc_function,@rl_instream) rl_stuff_char(k) return 1 end rescue LoadError # If we're not on Windows try... if ENV["LANG"] =~ /\.UTF-8/ @encoding = "U" elsif ENV["LANG"] =~ /\.EUC/ @encoding = "E" elsif ENV["LANG"] =~ /\.SHIFT/ @encoding = "S" else @encoding = "N" end def rl_getc(stream) begin c = stream.read(1) rescue Errno::EINTR c = rl_getc(stream) end return c ? c : EOF end def rl_gather_tyi() chars_avail = 0 result = select([@rl_instream],nil,nil,0.1) return 0 if result.nil? k = send(@rl_getc_function,@rl_instream) rl_stuff_char(k) return 1 end end if (Object.const_defined?('Encoding') and Encoding.respond_to?('default_external')) @encoding = "X" # ruby 1.9.x or greater @encoding_name = Encoding.default_external.to_s end @rl_byte_oriented = @encoding == "N" # Read a key, including pending input. def rl_read_key() @rl_key_sequence_length+=1 if (@rl_pending_input!=0) c = @rl_pending_input rl_clear_pending_input() else # If the user has an event function, then call it periodically. if (@rl_event_hook) while (@rl_event_hook && (c=rl_get_char()).nil?) send(@rl_event_hook) if (@rl_done) # XXX - experimental return ("\n") end if (rl_gather_tyi() < 0) # XXX - EIO @rl_done = true return ("\n") end end else if (c=rl_get_char()).nil? c = send(@rl_getc_function,@rl_instream) end end end return (c) end # Return the amount of space available in the buffer for stuffing # characters. def ibuffer_space() if (@pop_index > @push_index) return (@pop_index - @push_index - 1) else return (@ibuffer_len - (@push_index - @pop_index)) end end # Get a key from the buffer of characters to be read. # Return the key in KEY. # Result is KEY if there was a key, or 0 if there wasn't. def rl_get_char() if (@push_index == @pop_index) return nil end key = @ibuffer[@pop_index] @pop_index += 1 if (@pop_index >= @ibuffer_len) @pop_index = 0 end return key end # Stuff KEY into the *front* of the input buffer. # Returns non-zero if successful, zero if there is # no space left in the buffer. def _rl_unget_char(key) if (ibuffer_space()!=0) @pop_index-=1 if (@pop_index < 0) @pop_index = @ibuffer_len - 1 end @ibuffer[@pop_index] = key return (1) end return (0) end def _rl_subseq_getchar(key) if (key == ESC) rl_setstate(RL_STATE_METANEXT) end rl_setstate(RL_STATE_MOREINPUT) k = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) if (key == ESC) rl_unsetstate(RL_STATE_METANEXT) end return k end # Clear to the end of the line. COUNT is the minimum # number of character spaces to clear, def _rl_clear_to_eol(count) if (@_rl_term_clreol) @rl_outstream.write(@_rl_term_clreol) elsif (count!=0) space_to_eol(count) end end # Clear to the end of the line using spaces. COUNT is the minimum # number of character spaces to clear, def space_to_eol(count) if @hConsoleHandle csbi = 0.chr * 24 @GetConsoleScreenBufferInfo.Call(@hConsoleHandle,csbi) cursor_pos = csbi[4,4].unpack('L').first written = 0.chr * 4 @FillConsoleOutputCharacter.Call(@hConsoleHandle,0x20,count,cursor_pos,written) else @rl_outstream.write(' ' * count) end @_rl_last_c_pos += count end def _rl_clear_screen() if (@_rl_term_clrpag) @rl_outstream.write(@_rl_term_clrpag) else rl_crlf() end end # Move the cursor back. def _rl_backspace(count) if (@_rl_term_backspace) @_rl_out_stream.write(@_rl_term_backspace * count) else @_rl_out_stream.write("\b"*count) end 0 end # Move to the start of the next line. def rl_crlf() if (@_rl_term_cr) @_rl_out_stream.write(@_rl_term_cr) end @_rl_out_stream.write("\n") return 0 end # Move to the start of the current line. def cr() if (@_rl_term_cr) @_rl_out_stream.write(@_rl_term_cr) @_rl_last_c_pos = 0 end end def _rl_erase_entire_line() cr() _rl_clear_to_eol(0) cr() @rl_outstream.flush end def _rl_internal_char_cleanup() # In vi mode, when you exit insert mode, the cursor moves back # over the previous character. We explicitly check for that here. if (@rl_editing_mode == @vi_mode && @_rl_keymap == @vi_movement_keymap) rl_vi_check() end if (@rl_num_chars_to_read!=0 && @rl_end >= @rl_num_chars_to_read) send(@rl_redisplay_function) @_rl_want_redisplay = false rl_newline(1, "\n") end if (!@rl_done) send(@rl_redisplay_function) @_rl_want_redisplay = false end # If the application writer has told us to erase the entire line if # the only character typed was something bound to rl_newline, do so. if (@rl_erase_empty_line && @rl_done && @rl_last_func == :rl_newline && @rl_point == 0 && @rl_end == 0) _rl_erase_entire_line() end end def readline_internal_charloop() lastc = -1 eof_found = false while (!@rl_done) lk = @_rl_last_command_was_kill # send(rl_redisplay_function) # @_rl_want_redisplay = false if (@rl_pending_input == 0) # Then initialize the argument and number of keys read. _rl_reset_argument() @rl_key_sequence_length = 0 end rl_setstate(RL_STATE_READCMD) c = rl_read_key() rl_unsetstate(RL_STATE_READCMD) # look at input.c:rl_getc() for the circumstances under which this will #be returned; punt immediately on read error without converting it to #a newline. if (c == READERR) eof_found = true break end # EOF typed to a non-blank line is a . if (c == EOF && @rl_end!=0) c = NEWLINE end # The character _rl_eof_char typed to blank line, and not as the #previous character is interpreted as EOF. if (((c == @_rl_eof_char && lastc != c) || c == EOF) && @rl_end==0) eof_found = true break end lastc = c if _rl_dispatch(c, @_rl_keymap)== -1 next end # If there was no change in _rl_last_command_was_kill, then no kill #has taken place. Note that if input is pending we are reading #a prefix command, so nothing has changed yet. if (@rl_pending_input == 0 && lk == @_rl_last_command_was_kill) @_rl_last_command_was_kill = false end _rl_internal_char_cleanup() end eof_found end # How to abort things. def _rl_abort_internal() rl_ding() rl_clear_message() _rl_reset_argument() rl_clear_pending_input() rl_unsetstate(RL_STATE_MACRODEF) @rl_last_func = nil #throw :readline_top_level send(@rl_redisplay_function) @_rl_want_redisplay = false 0 end def rl_abort(count, key) _rl_abort_internal() end def rl_vi_check() if (@rl_point!=0 && @rl_point == @rl_end) @rl_point-=1 end 0 end def readline_internal_teardown(eof) # Restore the original of this history line, iff the line that we # are editing was originally in the history, AND the line has changed. entry = current_history() if (entry && @rl_undo_list) temp = @rl_line_buffer.delete(0.chr).dup rl_revert_line(1, 0) entry = replace_history_entry(where_history(), @rl_line_buffer, nil) entry = nil @rl_line_buffer = temp+0.chr temp = nil end # At any rate, it is highly likely that this line has an undo list. Get # rid of it now. if (@rl_undo_list) rl_free_undo_list() end # Restore normal cursor, if available. _rl_set_insert_mode(RL_IM_INSERT, 0) (eof ? nil : @rl_line_buffer.delete(0.chr)) end # Read a line of input from the global rl_instream, doing output on # the global rl_outstream. # If rl_prompt is non-null, then that is our prompt. def readline_internal() readline_internal_setup() eof = readline_internal_charloop() readline_internal_teardown(eof) end # Read a line of input. Prompt with PROMPT. An empty PROMPT means # none. A return value of NULL means that EOF was encountered. def readline(prompt) # If we are at EOF return a NULL string. if (@rl_pending_input == EOF) rl_clear_pending_input() return nil end rl_set_prompt(prompt) rl_initialize() @readline_echoing_p = true if (@rl_prep_term_function) send(@rl_prep_term_function,@_rl_meta_flag) end rl_set_signals() value = readline_internal() if(@rl_deprep_term_function) send(@rl_deprep_term_function) end rl_clear_signals() value end # Increase the size of RL_LINE_BUFFER until it has enough space to hold # LEN characters. def rl_extend_line_buffer(len) while (len >= @rl_line_buffer.length) @rl_line_buffer << 0.chr * DEFAULT_BUFFER_SIZE end @the_line = @rl_line_buffer end # Insert a string of text into the line at point. This is the only # way that you should do insertion. _rl_insert_char () calls this # function. Returns the number of characters inserted. def rl_insert_text(string) string.delete!(0.chr) l = string.length return 0 if (l == 0) if (@rl_end + l >= @rl_line_buffer.length) rl_extend_line_buffer(@rl_end + l) end @rl_line_buffer[@rl_point,0] = string # Remember how to undo this if we aren't undoing something. if (!@_rl_doing_an_undo) # If possible and desirable, concatenate the undos. if ((l == 1) && @rl_undo_list && (@rl_undo_list.what == UNDO_INSERT) && (@rl_undo_list.end == @rl_point) && (@rl_undo_list.end - @rl_undo_list.start < 20)) @rl_undo_list.end+=1 else rl_add_undo(UNDO_INSERT, @rl_point, @rl_point + l, nil) end end @rl_point += l @rl_end += l if @rl_line_buffer.length <= @rl_end @rl_line_buffer << 0.chr * (@rl_end - @rl_line_buffer.length + 1) else @rl_line_buffer[@rl_end] = "\0" end l end def alloc_undo_entry(what, start, _end, text) temp = Struct.new(:what,:start,:end,:text,:next).new temp.what = what temp.start = start temp.end = _end temp.text = text temp.next = nil temp end #* Remember how to undo something. Concatenate some undos if that # seems right. def rl_add_undo(what, start, _end, text) temp = alloc_undo_entry(what, start, _end, text) temp.next = @rl_undo_list @rl_undo_list = temp end # Delete the string between FROM and TO. FROM is inclusive, TO is not. # Returns the number of characters deleted. def rl_delete_text(from, to) # Fix it if the caller is confused. if (from > to) from,to = to,from end # fix boundaries if (to > @rl_end) to = @rl_end if (from > to) from = to end end if (from < 0) from = 0 end text = rl_copy_text(from, to) diff = to - from @rl_line_buffer[from...to] = '' @rl_line_buffer << 0.chr * diff # Remember how to undo this delete. if (!@_rl_doing_an_undo) rl_add_undo(UNDO_DELETE, from, to, text) else text = nil end @rl_end -= diff @rl_line_buffer[@rl_end] = 0.chr return (diff) end def rl_copy_text(from, to) return @rl_line_buffer[from...to] end # Fix up point so that it is within the line boundaries after killing # text. If FIX_MARK_TOO is non-zero, the mark is forced within line # boundaries also. def __rl_fix_point(x) if (x > @rl_end) @rl_end elsif (x < 0) 0 else x end end def _rl_fix_point(fix_mark_too) @rl_point = __rl_fix_point(@rl_point) if (fix_mark_too) @rl_mark = __rl_fix_point(@rl_mark) end end # Begin a group. Subsequent undos are undone as an atomic operation. def rl_begin_undo_group() rl_add_undo(UNDO_BEGIN, 0, 0, nil) @_rl_undo_group_level+=1 0 end # End an undo group started with rl_begin_undo_group (). def rl_end_undo_group() rl_add_undo(UNDO_END, 0, 0, nil) @_rl_undo_group_level-=1 0 end def rl_free_undo_list() replace_history_data(-1, @rl_undo_list, nil) @rl_undo_list = nil end # Replace the contents of the line buffer between START and END with # TEXT. The operation is undoable. To replace the entire line in an # undoable mode, use _rl_replace_text(text, 0, rl_end) def _rl_replace_text(text, start, _end) rl_begin_undo_group() rl_delete_text(start, _end + 1) @rl_point = start n = rl_insert_text(text) rl_end_undo_group() n end # Replace the current line buffer contents with TEXT. If CLEAR_UNDO is # non-zero, we free the current undo list. def rl_replace_line(text, clear_undo) len = text.delete(0.chr).length @rl_line_buffer = text.dup + 0.chr @rl_end = len if (clear_undo) rl_free_undo_list() end _rl_fix_point(true) end # Replace the DATA in the specified history entries, replacing OLD with # NEW. WHICH says which one(s) to replace: WHICH == -1 means to replace # all of the history entries where entry->data == OLD; WHICH == -2 means # to replace the `newest' history entry where entry->data == OLD; and # WHICH >= 0 means to replace that particular history entry's data, as # long as it matches OLD. def replace_history_data(which,old, new) new = new.dup if new if (which < -2 || which >= @history_length || @history_length == 0 || @the_history.nil?) return end if (which >= 0) entry = @the_history[which] if (entry && entry.data == old) entry.data = new end return end last = -1 for i in 0 ... @history_length entry = @the_history[i] if entry.nil? next end if (entry.data == old) last = i if (which == -1) entry.data = new end end end if (which == -2 && last >= 0) entry = @the_history[last] entry.data = new # XXX - we don't check entry->old end end # Move forward COUNT bytes. def rl_forward_byte(count, key) if (count < 0) return (rl_backward_byte(-count, key)) end if (count > 0) _end = @rl_point + count lend = @rl_end > 0 ? @rl_end - ((@rl_editing_mode == @vi_mode)?1:0) : @rl_end if (_end > lend) @rl_point = lend rl_ding() else @rl_point = _end end end if (@rl_end < 0) @rl_end = 0 end return 0 end # Move forward COUNT characters. def rl_forward_char(count, key) if @rl_byte_oriented return (rl_forward_byte(count, key)) end if (count < 0) return (rl_backward_char(-count, key)) end if (count > 0) point = _rl_find_next_mbchar(@rl_line_buffer, @rl_point, count, MB_FIND_NONZERO) if (@rl_end <= point && @rl_editing_mode == @vi_mode) point = _rl_find_prev_mbchar(@rl_line_buffer, @rl_end, MB_FIND_NONZERO) end if (@rl_point == point) rl_ding() end @rl_point = point if (@rl_end < 0) @rl_end = 0 end end 0 end # Backwards compatibility. def rl_forward(count, key) rl_forward_char(count, key) end # Move backward COUNT bytes. def rl_backward_byte(count, key) if (count < 0) return (rl_forward_byte(-count, key)) end if (count > 0) if (@rl_point < count) @rl_point = 0 rl_ding() else @rl_point -= count end end if (@rl_point < 0) @rl_point = 0 end 0 end # Move backward COUNT characters. def rl_backward_char(count, key) if @rl_byte_oriented return (rl_backward_byte(count, key)) end if (count < 0) return (rl_forward_char(-count, key)) end if (count > 0) point = @rl_point while (count > 0 && point > 0) point = _rl_find_prev_mbchar(@rl_line_buffer, point, MB_FIND_NONZERO) count-=1 end if (count > 0) @rl_point = 0 rl_ding() else @rl_point = point end end 0 end # Backwards compatibility. def rl_backward(count, key) rl_backward_char(count, key) end # Move to the beginning of the line. def rl_beg_of_line(count, key) @rl_point = 0 0 end # Move to the end of the line. def rl_end_of_line(count, key) @rl_point = @rl_end 0 end def _rl_char_value(buf,ind) buf[ind,1] end @_rl_allow_pathname_alphabetic_chars = false @pathname_alphabetic_chars = '/-_=~.#$' def rl_alphabetic(c) if c =~ /\w/ return true end return !!(@_rl_allow_pathname_alphabetic_chars && @pathname_alphabetic_chars[c]) end def _rl_walphabetic(c) rl_alphabetic(c) end # Move forward a word. We do what Emacs does. Handles multibyte chars. def rl_forward_word(count, key) if (count < 0) return (rl_backward_word(-count, key)) end while (count>0) return 0 if (@rl_point == @rl_end) # If we are not in a word, move forward until we are in one. # Then, move forward until we hit a non-alphabetic character. c = _rl_char_value(@rl_line_buffer, @rl_point) if (!_rl_walphabetic(c)) if !@rl_byte_oriented @rl_point = _rl_find_next_mbchar(@rl_line_buffer, @rl_point, 1, MB_FIND_NONZERO) else @rl_point += 1 end while (@rl_point < @rl_end) c = _rl_char_value(@rl_line_buffer, @rl_point) if (_rl_walphabetic(c)) break end if !@rl_byte_oriented @rl_point = _rl_find_next_mbchar(@rl_line_buffer, @rl_point, 1, MB_FIND_NONZERO) else @rl_point += 1 end end end return 0 if (@rl_point == @rl_end) if !@rl_byte_oriented @rl_point = _rl_find_next_mbchar(@rl_line_buffer, @rl_point, 1, MB_FIND_NONZERO) else @rl_point += 1 end while (@rl_point < @rl_end) c = _rl_char_value(@rl_line_buffer, @rl_point) if (!_rl_walphabetic(c)) break end if !@rl_byte_oriented @rl_point = _rl_find_next_mbchar(@rl_line_buffer, @rl_point, 1, MB_FIND_NONZERO) else @rl_point += 1 end end count -= 1 end 0 end # Move backward a word. We do what Emacs does. Handles multibyte chars. def rl_backward_word(count, key) if (count < 0) return (rl_forward_word(-count, key)) end while (count>0) return 0 if (@rl_point == 0) # Like rl_forward_word (), except that we look at the characters # just before point. _p = !@rl_byte_oriented ? _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO):(@rl_point-1) c = _rl_char_value(@rl_line_buffer, _p) if (!_rl_walphabetic(c)) @rl_point = _p while (@rl_point > 0) _p = !@rl_byte_oriented ? _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO):(@rl_point-1) c = _rl_char_value(@rl_line_buffer, _p) if (_rl_walphabetic(c)) break end @rl_point = _p end end while (@rl_point>0) _p = !@rl_byte_oriented ? _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO):(@rl_point-1) c = _rl_char_value(@rl_line_buffer, _p) if (!_rl_walphabetic(c)) break else @rl_point = _p end end count -= 1 end 0 end # return the `current display line' of the cursor -- the number of lines to # move up to get to the first screen line of the current readline line. def _rl_current_display_line() # Find out whether or not there might be invisible characters in the # editing buffer. if (@rl_display_prompt == @rl_prompt) nleft = @_rl_last_c_pos - @_rl_screenwidth - @rl_visible_prompt_length else nleft = @_rl_last_c_pos - @_rl_screenwidth end if (nleft > 0) ret = 1 + nleft / @_rl_screenwidth else ret = 0 end ret end # Actually update the display, period. def rl_forced_update_display() if (@visible_line) @visible_line.gsub!(/[^\x00]/,0.chr) end rl_on_new_line() @forced_display=true if !@forced_display send(@rl_redisplay_function) 0 end # Clear the current line. Numeric argument to C-l does this. def rl_refresh_line(ignore1, ignore2) curr_line = _rl_current_display_line() _rl_move_vert(curr_line) _rl_move_cursor_relative(0, @rl_line_buffer) # XXX is this right _rl_clear_to_eol(0) # arg of 0 means to not use spaces rl_forced_update_display() @rl_display_fixed = true 0 end # C-l typed to a line without quoting clears the screen, and then reprints # the prompt and the current input line. Given a numeric arg, redraw only # the current line. def rl_clear_screen(count, key) if (@rl_explicit_arg) rl_refresh_line(count, key) return 0 end _rl_clear_screen() # calls termcap function to clear screen rl_forced_update_display() @rl_display_fixed = true 0 end # Restore the _rl_saved_line_for_history if there is one. def rl_maybe_unsave_line() if (@_rl_saved_line_for_history) # Can't call with `1' because rl_undo_list might point to an undo # list from a history entry, as in rl_replace_from_history() below. rl_replace_line(@_rl_saved_line_for_history.line, false) @rl_undo_list = @_rl_saved_line_for_history.data @_rl_saved_line_for_history = nil @rl_point = @rl_end # rl_replace_line sets rl_end else rl_ding() end 0 end # Save the current line in _rl_saved_line_for_history. def rl_maybe_save_line() if @_rl_saved_line_for_history.nil? @_rl_saved_line_for_history = Struct.new(:line,:timestamp,:data).new @_rl_saved_line_for_history.line = @rl_line_buffer.dup @_rl_saved_line_for_history.timestamp = nil @_rl_saved_line_for_history.data = @rl_undo_list end 0 end # Returns the magic number which says what history element we are # looking at now. In this implementation, it returns history_offset. def where_history() @history_offset end # Make the history entry at WHICH have LINE and DATA. This returns # the old entry so you can dispose of the data. In the case of an # invalid WHICH, a NULL pointer is returned. def replace_history_entry (which, line, data) if (which < 0 || which >= @history_length) return nil end temp = Struct.new(:line,:timestamp,:data).new old_value = @the_history[which] temp.line = line.delete(0.chr) temp.data = data temp.timestamp = old_value.timestamp.dup @the_history[which] = temp old_value end # Perhaps put back the current line if it has changed. def rl_maybe_replace_line() temp = current_history() # If the current line has changed, save the changes. if (temp && temp.data != @rl_undo_list) temp = replace_history_entry(where_history(), @rl_line_buffer, @rl_undo_list) end 0 end # Back up history_offset to the previous history entry, and return # a pointer to that entry. If there is no previous entry then return # a NULL pointer. def previous_history() @history_offset!=0 ? @the_history[@history_offset-=1] : nil end # Move history_offset forward to the next history entry, and return # a pointer to that entry. If there is no next entry then return a # NULL pointer. def next_history() (@history_offset == @history_length) ? nil : @the_history[@history_offset+=1] end # Get the previous item out of our interactive history, making it the current # line. If there is no previous history, just ding. def rl_get_previous_history(count, key) if (count < 0) return (rl_get_next_history(-count, key)) end if (count == 0) return 0 end # either not saved by rl_newline or at end of line, so set appropriately. if (@_rl_history_saved_point == -1 && (@rl_point!=0 || @rl_end!=0)) @_rl_history_saved_point = (@rl_point == @rl_end) ? -1 : @rl_point end # If we don't have a line saved, then save this one. rl_maybe_save_line() # If the current line has changed, save the changes. rl_maybe_replace_line() temp = old_temp = nil while (count>0) temp = previous_history() if temp.nil? break end old_temp = temp count -= 1 end # If there was a large argument, and we moved back to the start of the # history, that is not an error. So use the last value found. if (temp.nil? && old_temp) temp = old_temp end if temp.nil? rl_ding() else rl_replace_from_history(temp, 0) _rl_history_set_point() end 0 end def _rl_history_set_point () @rl_point = (@_rl_history_preserve_point && @_rl_history_saved_point != -1) ? @_rl_history_saved_point : @rl_end if (@rl_point > @rl_end) @rl_point = @rl_end end if (@rl_editing_mode == @vi_mode && @_rl_keymap != @vi_insertion_keymap) @rl_point = 0 end if (@rl_editing_mode == @emacs_mode) @rl_mark = (@rl_point == @rl_end ? 0 : @rl_end) end end # Move down to the next history line. def rl_get_next_history(count, key) if (count < 0) return (rl_get_previous_history(-count, key)) end if (count == 0) return 0 end rl_maybe_replace_line() # either not saved by rl_newline or at end of line, so set appropriately. if (@_rl_history_saved_point == -1 && (@rl_point!=0 || @rl_end!=0)) @_rl_history_saved_point = (@rl_point == @rl_end) ? -1 : @rl_point end temp = nil while (count>0) temp = next_history() if temp.nil? break end count -= 1 end if temp.nil? rl_maybe_unsave_line() else rl_replace_from_history(temp, 0) _rl_history_set_point() end 0 end def rl_arrow_keys(count, c) rl_setstate(RL_STATE_MOREINPUT) ch = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) case (ch.upcase) when 'A' rl_get_previous_history(count, ch) when 'B' rl_get_next_history(count, ch) when 'C' rl_forward_byte(count, ch) when 'D' rl_backward_byte(count, ch) else rl_ding() end 0 end def _rl_any_typein() return (@push_index != @pop_index) end def _rl_insert_typein(c) string = c while ((key = rl_get_char()) && @_rl_keymap[key] == :rl_insert) string << key end if (key) _rl_unget_char(key) end rl_insert_text(string) end # Insert the character C at the current location, moving point forward. # If C introduces a multibyte sequence, we read the whole sequence and # then insert the multibyte char into the line buffer. def _rl_insert_char(count, c) return 0 if (count <= 0) incoming = '' if @rl_byte_oriented incoming << c incoming_length = 1 else @pending_bytes << c if _rl_get_char_len(@pending_bytes) == -2 return 1 else incoming = @pending_bytes @pending_bytes = '' incoming_length = incoming.length end end if(count>1) string = incoming * count rl_insert_text(string) string = nil return 0 end if @rl_byte_oriented # We are inserting a single character. #If there is pending input, then make a string of all of the #pending characters that are bound to rl_insert, and insert #them all. if (_rl_any_typein()) _rl_insert_typein(c) else rl_insert_text(c) end else rl_insert_text(incoming) end return 0 end # Overwrite the character at point (or next COUNT characters) with C. # If C introduces a multibyte character sequence, read the entire sequence # before starting the overwrite loop. def _rl_overwrite_char(count, c) # Read an entire multibyte character sequence to insert COUNT times. if (count > 0 && !@rl_byte_oriented) mbkey = '' k = _rl_read_mbstring(c, mbkey, MB_LEN_MAX) end rl_begin_undo_group() count.times do if !@rl_byte_oriented rl_insert_text(mbkey) else _rl_insert_char(1, c) end if (@rl_point < @rl_end) rl_delete(1, c) end end rl_end_undo_group() return 0 end def rl_insert(count, c) ((@rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char(count, c) : _rl_overwrite_char(count, c)) end # Insert the next typed character verbatim. def _rl_insert_next(count) rl_setstate(RL_STATE_MOREINPUT) c = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) _rl_insert_char(count, c) end def rl_quoted_insert(count, key) _rl_insert_next(count) end # Insert a tab character. def rl_tab_insert(count, key) _rl_insert_char(count, "\t") end def _rl_vi_save_insert(up) if (up.nil? || up.what != UNDO_INSERT) if (@vi_insert_buffer_size >= 1) @vi_insert_buffer[0] = 0.chr end return end start = up.start _end = up.end len = _end - start + 1 @vi_insert_buffer = @rl_line_buffer[start,len-1] end def _rl_vi_done_inserting() if (@_rl_vi_doing_insert) # The `C', `s', and `S' commands set this. rl_end_undo_group() # Now, the text between rl_undo_list->next->start and # rl_undo_list->next->end is what was inserted while in insert # mode. It gets copied to VI_INSERT_BUFFER because it depends # on absolute indices into the line which may change (though they # probably will not). @_rl_vi_doing_insert = 0 _rl_vi_save_insert(@rl_undo_list.next) @vi_continued_command = 1 else if ((@_rl_vi_last_key_before_insert == 'i' || @_rl_vi_last_key_before_insert == 'a') && @rl_undo_list) _rl_vi_save_insert(@rl_undo_list) # XXX - Other keys probably need to be checked. elsif (@_rl_vi_last_key_before_insert == 'C') rl_end_undo_group() end while (@_rl_undo_group_level > 0) rl_end_undo_group() end @vi_continued_command = 0 end end # Is the command C a VI mode text modification command? def _rl_vi_textmod_command(c) return @vi_textmod[c] end def _rl_vi_reset_last() @_rl_vi_last_command = 'i' @_rl_vi_last_repeat = 1 @_rl_vi_last_arg_sign = 1 @_rl_vi_last_motion = 0 end def _rl_update_final() full_lines = false # If the cursor is the only thing on an otherwise-blank last line, # compensate so we don't print an extra CRLF. if (@_rl_vis_botlin && @_rl_last_c_pos == 0 && @visible_line[@vis_lbreaks[@_rl_vis_botlin],1] == 0.chr ) @_rl_vis_botlin-=1 full_lines = true end _rl_move_vert(@_rl_vis_botlin) # If we've wrapped lines, remove the final xterm line-wrap flag. if (full_lines && @_rl_term_autowrap && (vis_llen(@_rl_vis_botlin) == @_rl_screenwidth)) last_line = @visible_line[@vis_lbreaks[@_rl_vis_botlin]..-1] @cpos_buffer_position = -1 # don't know where we are in buffer _rl_move_cursor_relative(@_rl_screenwidth - 1, last_line) # XXX _rl_clear_to_eol(0) @rl_outstream.write(last_line[@_rl_screenwidth - 1,1]) end @_rl_vis_botlin = 0 rl_crlf() @rl_outstream.flush @rl_display_fixed = true if !@rl_display_fixed end # What to do when a NEWLINE is pressed. We accept the whole line. # KEY is the key that invoked this command. I guess it could have # meaning in the future. def rl_newline(count, key) @rl_done = true if (@_rl_history_preserve_point) @_rl_history_saved_point = (@rl_point == @rl_end) ? 1 : @rl_point end rl_setstate(RL_STATE_DONE) if (@rl_editing_mode == @vi_mode) _rl_vi_done_inserting() if (_rl_vi_textmod_command(@_rl_vi_last_command).nil?) # XXX _rl_vi_reset_last() end end # If we've been asked to erase empty lines, suppress the final update, # since _rl_update_final calls rl_crlf(). if (@rl_erase_empty_line && @rl_point == 0 && @rl_end == 0) return 0 end if @readline_echoing_p _rl_update_final() end 0 end # What to do for some uppercase characters, like meta characters, # and some characters appearing in emacs_ctlx_keymap. This function # is just a stub, you bind keys to it and the code in _rl_dispatch () # is special cased. def rl_do_lowercase_version(ignore1, ignore2) 0 end def rl_character_len(c, pos) if (meta_char(c)) return ((!@_rl_output_meta_chars) ? 4 : 1) end if (c == "\t") return (((pos | 7) + 1) - pos) end if (ctrl_char(c) || c == RUBOUT) return (2) end return ((isprint(c)) ? 1 : 2) end # This is different from what vi does, so the code's not shared. Emacs # rubout in overwrite mode has one oddity: it replaces a control # character that's displayed as two characters (^X) with two spaces. def _rl_overwrite_rubout(count, key) if (@rl_point == 0) rl_ding() return 1 end opoint = @rl_point # L == number of spaces to insert l = 0 count.times do rl_backward_char(1, key) l += rl_character_len(@rl_line_buffer[@rl_point,1], @rl_point) # not exactly right end rl_begin_undo_group() if (count > 1 || @rl_explicit_arg) rl_kill_text(opoint, @rl_point) else rl_delete_text(opoint, @rl_point) end # Emacs puts point at the beginning of the sequence of spaces. if (@rl_point < @rl_end) opoint = @rl_point _rl_insert_char(l, ' ') @rl_point = opoint end rl_end_undo_group() 0 end # Rubout the character behind point. def rl_rubout(count, key) if (count < 0) return (rl_delete(-count, key)) end if (@rl_point==0) rl_ding() return -1 end if (@rl_insert_mode == RL_IM_OVERWRITE) return (_rl_overwrite_rubout(count, key)) end _rl_rubout_char(count, key) end # Quick redisplay hack when erasing characters at the end of the line. def _rl_erase_at_end_of_line(l) _rl_backspace(l) @rl_outstream.write(' '*l) _rl_backspace(l) @_rl_last_c_pos -= l @visible_line[@_rl_last_c_pos,l] = 0.chr * l @rl_display_fixed = true if !@rl_display_fixed end def _rl_rubout_char(count, key) # Duplicated code because this is called from other parts of the library. if (count < 0) return (rl_delete(-count, key)) end if (@rl_point == 0) rl_ding() return -1 end orig_point = @rl_point if (count > 1 || @rl_explicit_arg) rl_backward_char(count, key) rl_kill_text(orig_point, @rl_point) elsif (@rl_byte_oriented) c = @rl_line_buffer[@rl_point-=1,1] rl_delete_text(@rl_point, orig_point) # The erase-at-end-of-line hack is of questionable merit now. if (@rl_point == @rl_end && isprint(c) && @_rl_last_c_pos!=0) l = rl_character_len(c, @rl_point) _rl_erase_at_end_of_line(l) end else @rl_point = _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO) rl_delete_text(@rl_point, orig_point) end 0 end # Delete the character under the cursor. Given a numeric argument, # kill that many characters instead. def rl_delete(count, key) if (count < 0) return (_rl_rubout_char(-count, key)) end if (@rl_point == @rl_end) rl_ding() return -1 end if (count > 1 || @rl_explicit_arg) xpoint = @rl_point rl_forward_byte(count, key) rl_kill_text(xpoint, @rl_point) @rl_point = xpoint else if !@rl_byte_oriented xpoint =_rl_find_next_mbchar(@rl_line_buffer, @rl_point, 1, MB_FIND_NONZERO) else xpoint = @rl_point + 1 end rl_delete_text(@rl_point, xpoint) end 0 end # Add TEXT to the kill ring, allocating a new kill ring slot as necessary. # This uses TEXT directly, so the caller must not free it. If APPEND is # non-zero, and the last command was a kill, the text is appended to the # current kill ring slot, otherwise prepended. def _rl_copy_to_kill_ring(text, append) # First, find the slot to work with. if (!@_rl_last_command_was_kill) # Get a new slot. if @rl_kill_ring.nil? # If we don't have any defined, then make one. @rl_kill_ring_length = 1 @rl_kill_ring = Array.new(@rl_kill_ring_length+1) @rl_kill_ring[slot = 0] = nil else # We have to add a new slot on the end, unless we have # exceeded the max limit for remembering kills. slot = @rl_kill_ring_length if (slot == @rl_max_kills) @rl_kill_ring[0,slot] = @rl_kill_ring[1,slot] else slot = @rl_kill_ring_length += 1 end @rl_kill_ring[slot-=1] = nil end else slot = @rl_kill_ring_length - 1 end # If the last command was a kill, prepend or append. if (@_rl_last_command_was_kill && @rl_editing_mode != @vi_mode) old = @rl_kill_ring[slot] if (append) new = old + text else new = text + old end old = nil text = nil @rl_kill_ring[slot] = new else @rl_kill_ring[slot] = text end @rl_kill_index = slot 0 end # The way to kill something. This appends or prepends to the last # kill, if the last command was a kill command. if FROM is less # than TO, then the text is appended, otherwise prepended. If the # last command was not a kill command, then a new slot is made for # this kill. def rl_kill_text(from, to) # Is there anything to kill? if (from == to) @_rl_last_command_was_kill = true if !@_rl_last_command_was_kill return 0 end text = rl_copy_text(from, to) # Delete the copied text from the line. rl_delete_text(from, to) _rl_copy_to_kill_ring(text, from < to) @_rl_last_command_was_kill = true if !@_rl_last_command_was_kill 0 end # This does what C-w does in Unix. We can't prevent people from # using behaviour that they expect. def rl_unix_word_rubout(count, key) if (@rl_point == 0) rl_ding() else orig_point = @rl_point if (count <= 0) count = 1 end while (count>0) while (@rl_point>0 && whitespace(@rl_line_buffer[@rl_point - 1,1])) @rl_point-=1 end while (@rl_point>0 && !whitespace(@rl_line_buffer[@rl_point - 1,1])) @rl_point-=1 end count -= 1 end rl_kill_text(orig_point, @rl_point) if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end 0 end # This deletes one filename component in a Unix pathname. That is, it # deletes backward to directory separator (`/') or whitespace. def rl_unix_filename_rubout(count, key) if (@rl_point == 0) rl_ding() else orig_point = @rl_point if (count <= 0) count = 1 end while (count>0) c = @rl_line_buffer[@rl_point - 1,1] while (@rl_point>0 && (whitespace(c) || c == '/')) @rl_point-=1 c = @rl_line_buffer[@rl_point - 1,1] end while (@rl_point>0 && !whitespace(c) && c != '/') @rl_point-=1 c = @rl_line_buffer[@rl_point - 1,1] end count -= 1 end rl_kill_text(orig_point, @rl_point) if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end 0 end # Delete the character under the cursor, unless the insertion # point is at the end of the line, in which case the character # behind the cursor is deleted. COUNT is obeyed and may be used # to delete forward or backward that many characters. def rl_rubout_or_delete(count, key) if (@rl_end != 0 && @rl_point == @rl_end) return (_rl_rubout_char(count, key)) else return (rl_delete(count, key)) end end # Delete all spaces and tabs around point. def rl_delete_horizontal_space(count, ignore) start = @rl_point while (@rl_point!=0 && whitespace(@rl_line_buffer[@rl_point - 1])) @rl_point-=1 end start = @rl_point while (@rl_point < @rl_end && whitespace(@rl_line_buffer[@rl_point])) @rl_point+=1 end if (start != @rl_point) rl_delete_text(start, @rl_point) @rl_point = start end if (@rl_point < 0) @rl_point = 0 end 0 end # List the possible completions. See description of rl_complete (). def rl_possible_completions(ignore, invoking_key) rl_complete_internal('?') end # Like the tcsh editing function delete-char-or-list. The eof character # is caught before this is invoked, so this really does the same thing as # delete-char-or-list-or-eof, as long as it's bound to the eof character. def rl_delete_or_show_completions(count, key) if (@rl_end != 0 && @rl_point == @rl_end) return (rl_possible_completions(count, key)) else return (rl_delete(count, key)) end end # Turn the current line into a comment in shell history. # A K*rn shell style function. def rl_insert_comment(count, key) rl_beg_of_line(1, key) @rl_comment_text = @_rl_comment_begin ? @_rl_comment_begin : '#' if (!@rl_explicit_arg) rl_insert_text(@rl_comment_text) else @rl_comment_len = @rl_comment_text.length if @rl_comment_text[0,@rl_comment_len] == @rl_line_buffer[0,@rl_comment_len] rl_delete_text(@rl_point, @rl_point + @rl_comment_len) else rl_insert_text(@rl_comment_text) end end send(@rl_redisplay_function) rl_newline(1, "\n") 0 end def alloc_history_entry(string, ts) temp = Struct.new(:line,:data,:timestamp).new temp.line = string ? string.delete(0.chr) : string temp.data = nil temp.timestamp = ts return temp end def hist_inittime() t = Time.now.to_i ts = "X%u" % t ret = ts.dup ret[0,1] = @history_comment_char ret end # Place STRING at the end of the history list. The data field # is set to NULL. def add_history(string) if (@history_stifled && (@history_length == @history_max_entries)) # If the history is stifled, and history_length is zero, # and it equals history_max_entries, we don't save items. return if (@history_length == 0) @the_history.shift else if @the_history.nil? @the_history = [] @history_length = 1 else @history_length+=1 end end temp = alloc_history_entry(string, hist_inittime()) @the_history[@history_length] = nil @the_history[@history_length - 1] = temp end def using_history() @history_offset = @history_length end # Set default values for readline word completion. These are the variables # that application completion functions can change or inspect. def set_completion_defaults(what_to_do) # Only the completion entry function can change these. @rl_filename_completion_desired = false @rl_filename_quoting_desired = true @rl_completion_type = what_to_do @rl_completion_suppress_append = @rl_completion_suppress_quote = false # The completion entry function may optionally change this. @rl_completion_mark_symlink_dirs = @_rl_complete_mark_symlink_dirs end def _rl_find_completion_word() _end = @rl_point found_quote = 0 delimiter = 0.chr quote_char = 0.chr brkchars = nil if @rl_completion_word_break_hook brkchars = send(@rl_completion_word_break_hook) end if brkchars.nil? brkchars = @rl_completer_word_break_characters end if (@rl_completer_quote_characters) # We have a list of characters which can be used in pairs to # quote substrings for the completer. Try to find the start # of an unclosed quoted substring. # FOUND_QUOTE is set so we know what kind of quotes we found. scan = 0 pass_next = false while scan < _end if (pass_next) pass_next = false next end # Shell-like semantics for single quotes -- don't allow backslash # to quote anything in single quotes, especially not the closing # quote. If you don't like this, take out the check on the value # of quote_char. if (quote_char != "'" && @rl_line_buffer[scan,1] == "\\") pass_next = true found_quote |= RL_QF_BACKSLASH next end if (quote_char != 0.chr) # Ignore everything until the matching close quote char. if (@rl_line_buffer[scan,1] == quote_char) # Found matching close. Abandon this substring. quote_char = 0.chr @rl_point = _end end elsif (@rl_completer_quote_characters.include?(@rl_line_buffer[scan,1])) # Found start of a quoted substring. quote_char = @rl_line_buffer[scan,1] @rl_point = scan + 1 # Shell-like quoting conventions. if (quote_char == "'") found_quote |= RL_QF_SINGLE_QUOTE elsif (quote_char == '"') found_quote |= RL_QF_DOUBLE_QUOTE else found_quote |= RL_QF_OTHER_QUOTE end end if !@rl_byte_oriented scan = _rl_find_next_mbchar(@rl_line_buffer, scan, 1, MB_FIND_ANY) else scan += 1 end end end if (@rl_point == _end && quote_char == 0.chr) # We didn't find an unclosed quoted substring upon which to do # completion, so use the word break characters to find the # substring on which to complete. while (@rl_point = !@rl_byte_oriented ? _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_ANY):(@rl_point-1))>0 scan = @rl_line_buffer[@rl_point,1] if !brkchars.include?(scan) next end # Call the application-specific function to tell us whether # this word break character is quoted and should be skipped. if (@rl_char_is_quoted_p && found_quote!=0 && send(@rl_char_is_quoted_p,@rl_line_buffer, @rl_point)) next end # Convoluted code, but it avoids an n^2 algorithm with calls # to char_is_quoted. break end end # If we are at an unquoted word break, then advance past it. scan = @rl_line_buffer[@rl_point,1] # If there is an application-specific function to say whether or not # a character is quoted and we found a quote character, let that # function decide whether or not a character is a word break, even # if it is found in rl_completer_word_break_characters. Don't bother # if we're at the end of the line, though. if (scan != 0.chr) if (@rl_char_is_quoted_p) isbrk = (found_quote == 0 || !send(@rl_char_is_quoted_p,@rl_line_buffer, @rl_point)) && brkchars.include?(scan) else isbrk = brkchars.include?(scan) end if (isbrk) # If the character that caused the word break was a quoting # character, then remember it as the delimiter. if (@rl_basic_quote_characters && @rl_basic_quote_characters.include?(scan) && (_end - @rl_point) > 1) delimiter = scan end # If the character isn't needed to determine something special # about what kind of completion to perform, then advance past it. if (@rl_special_prefixes.nil? || !@rl_special_prefixes.include?(scan) ) @rl_point+=1 end end end return [quote_char,found_quote!=0,delimiter] end def gen_completion_matches(text, start, _end, our_func, found_quote, quote_char) @rl_completion_found_quote = found_quote @rl_completion_quote_character = quote_char # If the user wants to TRY to complete, but then wants to give # up and use the default completion function, they set the # variable rl_attempted_completion_function. if (@rl_attempted_completion_function) matches = Readline.send(@rl_attempted_completion_function,text, start, _end) if (matches || @rl_attempted_completion_over) @rl_attempted_completion_over = false return (matches) end end # XXX -- filename dequoting moved into rl_filename_completion_function matches = rl_completion_matches(text, our_func) matches end # Filter out duplicates in MATCHES. This frees up the strings in # MATCHES. def remove_duplicate_matches(matches) # Sort the items. # Sort the array without matches[0], since we need it to # stay in place no matter what. if matches.length>0 matches[1..-2] = matches[1..-2].sort.uniq end matches end def postprocess_matches(matchesp, matching_filenames) matches = matchesp return 0 if matches.nil? # It seems to me that in all the cases we handle we would like # to ignore duplicate possiblilities. Scan for the text to # insert being identical to the other completions. if (@rl_ignore_completion_duplicates) remove_duplicate_matches(matches) end # If we are matching filenames, then here is our chance to # do clever processing by re-examining the list. Call the # ignore function with the array as a parameter. It can # munge the array, deleting matches as it desires. if (@rl_ignore_some_completions_function && matching_filenames) nmatch = matches.length send(@rl_ignore_some_completions_function,matches) if (matches.nil? || matches[0].nil?) matches = nil return 0 else # If we removed some matches, recompute the common prefix. i = matches.length if (i > 1 && i < nmatch) t = matches[0] compute_lcd_of_matches(matches, i - 1, t) end end end matchesp = matches 1 end def insert_all_matches(matches, point, qc) rl_begin_undo_group() # remove any opening quote character; make_quoted_replacement will add # it back. if (qc && qc.length>0 && point>0 && @rl_line_buffer[point - 1,1] == qc) point-=1 end rl_delete_text(point, @rl_point) @rl_point = point if (matches[1]) i = 1 while(matches[i]) rp = make_quoted_replacement(matches[i], SINGLE_MATCH, qc) rl_insert_text(rp) rl_insert_text(" ") if (rp != matches[i]) rp = nil end i += 1 end else rp = make_quoted_replacement(matches[0], SINGLE_MATCH, qc) rl_insert_text(rp) rl_insert_text(" ") if (rp != matches[0]) rp = nil end end rl_end_undo_group() end def make_quoted_replacement(match, mtype, qc) # If we are doing completion on quoted substrings, and any matches # contain any of the completer_word_break_characters, then auto- # matically prepend the substring with a quote character (just pick # the first one from the list of such) if it does not already begin # with a quote string. FIXME: Need to remove any such automatically # inserted quote character when it no longer is necessary, such as # if we change the string we are completing on and the new set of # matches don't require a quoted substring. replacement = match should_quote = match && @rl_completer_quote_characters && @rl_filename_completion_desired && @rl_filename_quoting_desired if (should_quote) should_quote = should_quote && (qc.nil? || qc == 0.chr || (@rl_completer_quote_characters && @rl_completer_quote_characters.include?(qc))) end if (should_quote) # If there is a single match, see if we need to quote it. # This also checks whether the common prefix of several # matches needs to be quoted. should_quote = @rl_filename_quote_characters ? !!match[@rl_filename_quote_characters] : false do_replace = should_quote ? mtype : NO_MATCH # Quote the replacement, since we found an embedded # word break character in a potential match. if (do_replace != NO_MATCH && @rl_filename_quoting_function) replacement = send(@rl_filename_quoting_function,match, do_replace, qc) end end replacement end def insert_match(match, start, mtype, qc) oqc = qc replacement = make_quoted_replacement(match, mtype, qc) # Now insert the match. if (replacement) # Don't double an opening quote character. if (qc && qc.length>0 && start!=0 && @rl_line_buffer[start - 1,1] == qc && replacement[0,1] == qc) start-=1 # If make_quoted_replacement changed the quoting character, remove # the opening quote and insert the (fully-quoted) replacement. elsif (qc && (qc != oqc) && start!=0 && @rl_line_buffer[start - 1,1] == oqc && replacement[0,1] != oqc) start-=1 end _rl_replace_text(replacement, start, @rl_point - 1) if (replacement != match) replacement = nil end end end # Return the portion of PATHNAME that should be output when listing # possible completions. If we are hacking filename completion, we # are only interested in the basename, the portion following the # final slash. Otherwise, we return what we were passed. Since # printing empty strings is not very informative, if we're doing # filename completion, and the basename is the empty string, we look # for the previous slash and return the portion following that. If # there's no previous slash, we just return what we were passed. def printable_part(pathname) if (!@rl_filename_completion_desired) # don't need to do anything return (pathname) end temp = pathname.rindex('/') return pathname if temp.nil? File.basename(pathname) end def fnprint(to_print) printed_len = 0 case @encoding when 'E' arr = to_print.scan(/./me) when 'S' arr = to_print.scan(/./ms) when 'U' arr = to_print.scan(/./mu) when 'X' arr = to_print.dup.force_encoding(@encoding_name).chars else arr = to_print.scan(/./m) end arr.each do |s| if(ctrl_char(s)) @rl_outstream.write('^'+(s[0].ord|0x40).chr.upcase) printed_len += 2 elsif s == RUBOUT @rl_outstream.write('^?') printed_len += 2 else @rl_outstream.write(s) if @encoding=='U' printed_len += s.unpack('U').first >= 0x1000 ? 2 : 1 elsif @encoding=='X' printed_len += s.ord >= 0x1000 ? 2 : 1 else printed_len += s.length end end end printed_len end def _rl_internal_pager(lines) @rl_outstream.puts "--More--" @rl_outstream.flush i = get_y_or_n(1) _rl_erase_entire_line() if (i == 0) return -1 elsif (i == 2) return (lines - 1) else return 0 end end def path_isdir(filename) return File.directory?(filename) end # Return the character which best describes FILENAME. # `@' for symbolic links # `/' for directories # `*' for executables # `=' for sockets # `|' for FIFOs # `%' for character special devices # `#' for block special devices def stat_char(filename) return nil if !File.exists?(filename) return '/' if File.directory?(filename) return '%' if File.chardev?(filename) return '#' if File.blockdev?(filename) return '@' if File.symlink?(filename) return '=' if File.socket?(filename) return '|' if File.pipe?(filename) return '*' if File.executable?(filename) nil end # Output TO_PRINT to rl_outstream. If VISIBLE_STATS is defined and we # are using it, check for and output a single character for `special' # filenames. Return the number of characters we output. def print_filename(to_print, full_pathname) extension_char = 0.chr printed_len = fnprint(to_print) if (@rl_filename_completion_desired && (@rl_visible_stats || @_rl_complete_mark_directories)) # If to_print != full_pathname, to_print is the basename of the # path passed. In this case, we try to expand the directory # name before checking for the stat character. if (to_print != full_pathname) if full_pathname.nil? || full_pathname.length==0 dn = '/' else dn = File.dirname(full_pathname) end s = File.expand_path(dn) if (@rl_directory_completion_hook) send(@rl_directory_completion_hook,s) end slen = s.length tlen = to_print.length new_full_pathname = s.dup if (s[-1,1] == '/' ) slen-=1 else new_full_pathname[slen,1] = '/' end new_full_pathname[slen .. -1] = '/' + to_print if (@rl_visible_stats) extension_char = stat_char(new_full_pathname) else if (path_isdir(new_full_pathname)) extension_char = '/' end end new_full_pathname = nil else s = File.expand_path(full_pathname) if (@rl_visible_stats) extension_char = stat_char(s) else if (path_isdir(s)) extension_char = '/' end end end s = nil if (extension_char) @rl_outstream.write(extension_char) printed_len+=1 end end printed_len end # The user must press "y" or "n". Non-zero return means "y" pressed. def get_y_or_n(for_pager) while(true) rl_setstate(RL_STATE_MOREINPUT) c = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) if (c == 'y' || c == 'Y' || c == ' ') return (1) end if (c == 'n' || c == 'N' || c == RUBOUT) return (0) end if (c == ABORT_CHAR) _rl_abort_internal() end if (for_pager && (c == NEWLINE || c == RETURN)) return (2) end if (for_pager && (c == 'q' || c == 'Q')) return (0) end rl_ding() end end # Compute width of STRING when displayed on screen by print_filename def fnwidth(string) left = string.length + 1 width = pos = 0 while (string[pos] && string[pos,1] != 0.chr) if (ctrl_char(string[0,1]) || string[0,1] == RUBOUT) width += 2 pos+=1 else case @encoding when 'E' wc = string[pos,left-pos].scan(/./me)[0] bytes = wc.length tempwidth = wc.length when 'S' wc = string[pos,left-pos].scan(/./ms)[0] bytes = wc.length tempwidth = wc.length when 'U' wc = string[pos,left-pos].scan(/./mu)[0] bytes = wc.length tempwidth = wc.unpack('U').first >= 0x1000 ? 2 : 1 when 'X' wc = string[pos,left-pos].force_encoding(@encoding_name)[0] bytes = wc.bytesize tempwidth = wc.ord >= 0x1000 ? 2 : 1 else wc = string[pos,left-pos].scan(/./m)[0] bytes = wc.length tempwidth = wc.length end clen = bytes pos += clen w = tempwidth width += (w >= 0) ? w : 1 end end width end # Display MATCHES, a list of matching filenames in argv format. This # handles the simple case -- a single match -- first. If there is more # than one match, we compute the number of strings in the list and the # length of the longest string, which will be needed by the display # function. If the application wants to handle displaying the list of # matches itself, it sets RL_COMPLETION_DISPLAY_MATCHES_HOOK to the # address of a function, and we just call it. If we're handling the # display ourselves, we just call rl_display_match_list. We also check # that the list of matches doesn't exceed the user-settable threshold, # and ask the user if he wants to see the list if there are more matches # than RL_COMPLETION_QUERY_ITEMS. def display_matches(matches) # Move to the last visible line of a possibly-multiple-line command. _rl_move_vert(@_rl_vis_botlin) # Handle simple case first. What if there is only one answer? if matches[1].nil? temp = printable_part(matches[0]) rl_crlf() print_filename(temp, matches[0]) rl_crlf() rl_forced_update_display() @rl_display_fixed = true return end # There is more than one answer. Find out how many there are, # and find the maximum printed length of a single entry. max = 0 i = 1 while(matches[i]) temp = printable_part(matches[i]) len = fnwidth(temp) if (len > max) max = len end i += 1 end len = i - 1 # If the caller has defined a display hook, then call that now. if (@rl_completion_display_matches_hook) send(@rl_completion_display_matches_hook,matches, len, max) return end # If there are many items, then ask the user if she really wants to # see them all. if (@rl_completion_query_items > 0 && len >= @rl_completion_query_items) rl_crlf() @rl_outstream.write("Display all #{len} possibilities? (y or n)") @rl_outstream.flush if (get_y_or_n(false)==0) rl_crlf() rl_forced_update_display() @rl_display_fixed = true return end end rl_display_match_list(matches, len, max) rl_forced_update_display() @rl_display_fixed = true end # Complete the word at or before point. # WHAT_TO_DO says what to do with the completion. # `?' means list the possible completions. # TAB means do standard completion. # `*' means insert all of the possible completions. # `!' means to do standard completion, and list all possible completions if # there is more than one. # `@' means to do standard completion, and list all possible completions if # there is more than one and partial completion is not possible. def rl_complete_internal(what_to_do) rl_setstate(RL_STATE_COMPLETING) set_completion_defaults(what_to_do) saved_line_buffer = @rl_line_buffer ? @rl_line_buffer.delete(0.chr) : nil our_func = @rl_completion_entry_function ? @rl_completion_entry_function : :rl_filename_completion_function # We now look backwards for the start of a filename/variable word. _end = @rl_point found_quote = false delimiter = 0.chr quote_char = 0.chr if (@rl_point!=0) # This (possibly) changes rl_point. If it returns a non-zero char, # we know we have an open quote. quote_char,found_quote,delimiter = _rl_find_completion_word() end start = @rl_point @rl_point = _end text = rl_copy_text(start, _end) matches = gen_completion_matches(text, start, _end, our_func, found_quote, quote_char) # nontrivial_lcd is set if the common prefix adds something to the word # being completed. nontrivial_lcd = !!(matches && text != matches[0]) text = nil if matches.nil? rl_ding() saved_line_buffer = nil @completion_changed_buffer = false rl_unsetstate(RL_STATE_COMPLETING) return 0 end # If we are matching filenames, the attempted completion function will # have set rl_filename_completion_desired to a non-zero value. The basic # rl_filename_completion_function does this. i = @rl_filename_completion_desired if (postprocess_matches(matches, i) == 0) rl_ding() saved_line_buffer = nil @completion_changed_buffer = false rl_unsetstate(RL_STATE_COMPLETING) return 0 end case (what_to_do) when TAB,'!','@' # Insert the first match with proper quoting. if (matches[0]) insert_match(matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, quote_char) end # If there are more matches, ring the bell to indicate. # If we are in vi mode, Posix.2 says to not ring the bell. # If the `show-all-if-ambiguous' variable is set, display # all the matches immediately. Otherwise, if this was the # only match, and we are hacking files, check the file to # see if it was a directory. If so, and the `mark-directories' # variable is set, add a '/' to the name. If not, and we # are at the end of the line, then add a space. if (matches[1]) if (what_to_do == '!') display_matches(matches) elsif (what_to_do == '@') if (!nontrivial_lcd) display_matches(matches) end elsif (@rl_editing_mode != @vi_mode) rl_ding() # There are other matches remaining. end else append_to_match(matches[0], delimiter, quote_char, nontrivial_lcd) end when '*' insert_all_matches(matches, start, quote_char) when '?' display_matches(matches) else $stderr.write("\r\nreadline: bad value #{what_to_do} for what_to_do in rl_complete\n") rl_ding() saved_line_buffer = nil rl_unsetstate(RL_STATE_COMPLETING) return 1 end matches = nil # Check to see if the line has changed through all of this manipulation. if (saved_line_buffer) @completion_changed_buffer = @rl_line_buffer.delete(0.chr) != saved_line_buffer saved_line_buffer = nil end rl_unsetstate(RL_STATE_COMPLETING) 0 end # Complete the word at or before point. You have supplied the function # that does the initial simple matching selection algorithm (see # rl_completion_matches ()). The default is to do filename completion. def rl_complete(ignore, invoking_key) if (@rl_inhibit_completion) return (_rl_insert_char(ignore, invoking_key)) elsif (@rl_last_func == :rl_complete && !@completion_changed_buffer) return (rl_complete_internal('?')) elsif (@_rl_complete_show_all) return (rl_complete_internal('!')) elsif (@_rl_complete_show_unmodified) return (rl_complete_internal('@')) else return (rl_complete_internal(TAB)) end end # Return the history entry which is logically at OFFSET in the history array. # OFFSET is relative to history_base. def history_get(offset) local_index = offset - @history_base return (local_index >= @history_length || local_index < 0 || @the_history.nil?) ? nil : @the_history[local_index] end def rl_replace_from_history(entry, flags) # Can't call with `1' because rl_undo_list might point to an undo list # from a history entry, just like we're setting up here. rl_replace_line(entry.line, false) @rl_undo_list = entry.data @rl_point = @rl_end @rl_mark = 0 if (@rl_editing_mode == @vi_mode) @rl_point = 0 @rl_mark = @rl_end end end # Remove history element WHICH from the history. The removed # element is returned to you so you can free the line, data, # and containing structure. def remove_history(which) if (which < 0 || which >= @history_length || @history_length == 0 || @the_history.nil?) return nil end return_value = @the_history[which] @the_history.delete_at(which) @history_length-=1 return_value end def block_sigint() return if @sigint_blocked #@sigint_proc = Signal.trap("INT","IGNORE") @sigint_blocked = true end def release_sigint() return if !@sigint_blocked #Signal.trap("INT",@sigint_proc) @sigint_blocked = false end def save_tty_chars() @_rl_last_tty_chars = @_rl_tty_chars h = Hash[*`stty -a`.scan(/(\w+) = ([^;]+);/).flatten] h.each {|k,v| v.gsub!(/\^(.)/){($1[0].ord ^ ((?a..?z).include?($1[0]) ? 0x60 : 0x40)).chr}} @_rl_tty_chars.t_erase = h['erase'] @_rl_tty_chars.t_kill = h['kill'] @_rl_tty_chars.t_intr = h['intr'] @_rl_tty_chars.t_quit = h['quit'] @_rl_tty_chars.t_start = h['start'] @_rl_tty_chars.t_stop = h['stop'] @_rl_tty_chars.t_eof = h['eof'] @_rl_tty_chars.t_eol = "\n" @_rl_tty_chars.t_eol2 = h['eol2'] @_rl_tty_chars.t_susp = h['susp'] @_rl_tty_chars.t_dsusp = h['dsusp'] @_rl_tty_chars.t_reprint = h['rprnt'] @_rl_tty_chars.t_flush = h['flush'] @_rl_tty_chars.t_werase = h['werase'] @_rl_tty_chars.t_lnext = h['lnext'] @_rl_tty_chars.t_status = -1 @otio = `stty -g` end def _rl_bind_tty_special_chars(kmap) kmap[@_rl_tty_chars.t_erase] = :rl_rubout kmap[@_rl_tty_chars.t_kill] = :rl_unix_line_discard kmap[@_rl_tty_chars.t_werase] = :rl_unix_word_rubout kmap[@_rl_tty_chars.t_lnext] = :rl_quoted_insert end def prepare_terminal_settings(meta_flag) @readline_echoing_p = (`stty -a`.scan(/-*echo\b/).first == 'echo') # First, the basic settings to put us into character-at-a-time, no-echo # input mode. setting = " -echo -icrnl cbreak" # If this terminal doesn't care how the 8th bit is used, then we can # use it for the meta-key. If only one of even or odd parity is # specified, then the terminal is using parity, and we cannot. if (`stty -a`.scan(/-parenb\b/).first == '-parenb') setting << " pass8" end setting << " -ixoff" rl_bind_key(@_rl_tty_chars.t_start, :rl_restart_output) @_rl_eof_char = @_rl_tty_chars.t_eof #setting << " -isig" `stty #{setting}` end def _rl_control_keypad(on) if on && @_rl_term_ks @_rl_out_stream.write(@_rl_term_ks) elsif !on && @_rl_term_ke @_rl_out_stream.write(@_rl_term_ke) end end # Rebind all of the tty special chars that readline worries about back # to self-insert. Call this before saving the current terminal special # chars with save_tty_chars(). This only works on POSIX termios or termio # systems. def rl_tty_unset_default_bindings(kmap) # Don't bother before we've saved the tty special chars at least once. return if (!rl_isstate(RL_STATE_TTYCSAVED)) kmap[@_rl_tty_chars.t_erase] = :rl_insert kmap[@_rl_tty_chars.t_kill] = :rl_insert kmap[@_rl_tty_chars.t_lnext] = :rl_insert kmap[@_rl_tty_chars.t_werase] = :rl_insert end def rl_prep_terminal(meta_flag) if no_terminal? @readline_echoing_p = true return end return if (@terminal_prepped) # Try to keep this function from being INTerrupted. block_sigint() if (@_rl_bind_stty_chars) # If editing in vi mode, make sure we restore the bindings in the # insertion keymap no matter what keymap we ended up in. if (@rl_editing_mode == @vi_mode) rl_tty_unset_default_bindings(@vi_insertion_keymap) else rl_tty_unset_default_bindings(@_rl_keymap) end end save_tty_chars() rl_setstate(RL_STATE_TTYCSAVED) if (@_rl_bind_stty_chars) # If editing in vi mode, make sure we set the bindings in the # insertion keymap no matter what keymap we ended up in. if (@rl_editing_mode == @vi_mode) _rl_bind_tty_special_chars(@vi_insertion_keymap) else _rl_bind_tty_special_chars(@_rl_keymap) end end prepare_terminal_settings(meta_flag) if (@_rl_enable_keypad) _rl_control_keypad(true) end @rl_outstream.flush @terminal_prepped = true rl_setstate(RL_STATE_TERMPREPPED) release_sigint() end # Restore the terminal's normal settings and modes. def rl_deprep_terminal() return if ENV["TERM"].nil? return if (!@terminal_prepped) # Try to keep this function from being interrupted. block_sigint() if (@_rl_enable_keypad) _rl_control_keypad(false) end @rl_outstream.flush # restore terminal setting `stty #{@otio}` @terminal_prepped = false rl_unsetstate(RL_STATE_TERMPREPPED) release_sigint() end # Set the mark at POSITION. def _rl_set_mark_at_pos(position) return -1 if (position > @rl_end) @rl_mark = position 0 end # A bindable command to set the mark. def rl_set_mark(count, key) _rl_set_mark_at_pos(@rl_explicit_arg ? count : @rl_point) end # Kill from here to the end of the line. If DIRECTION is negative, kill # back to the line start instead. def rl_kill_line (direction, ignore) if (direction < 0) return (rl_backward_kill_line(1, ignore)) else orig_point = @rl_point rl_end_of_line(1, ignore) if (orig_point != @rl_point) rl_kill_text(orig_point, @rl_point) end @rl_point = orig_point if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end 0 end # Kill backwards to the start of the line. If DIRECTION is negative, kill # forwards to the line end instead. def rl_backward_kill_line(direction, ignore) if (direction < 0) return (rl_kill_line(1, ignore)) else if (@rl_point==0) rl_ding() else orig_point = @rl_point rl_beg_of_line(1, ignore) if (@rl_point != orig_point) rl_kill_text(orig_point, @rl_point) end if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end end 0 end # Kill the whole line, no matter where point is. def rl_kill_full_line(count, ignore) rl_begin_undo_group() @rl_point = 0 rl_kill_text(@rl_point, @rl_end) @rl_mark = 0 rl_end_undo_group() 0 end # Search backwards through the history looking for a string which is typed # interactively. Start with the current line. def rl_reverse_search_history(sign, key) rl_search_history(-sign, key) end # Search forwards through the history looking for a string which is typed # interactively. Start with the current line. def rl_forward_search_history(sign, key) rl_search_history(sign, key) end # Search through the history looking for an interactively typed string. # This is analogous to i-search. We start the search in the current line. # DIRECTION is which direction to search; >= 0 means forward, < 0 means # backwards. def rl_search_history(direction, invoking_key) rl_setstate(RL_STATE_ISEARCH) cxt = _rl_isearch_init(direction) rl_display_search(cxt.search_string, (cxt.sflags & SF_REVERSE)!=0, -1) # If we are using the callback interface, all we do is set up here and # return. The key is that we leave RL_STATE_ISEARCH set. if (rl_isstate(RL_STATE_CALLBACK)) return (0) end r = -1 while(true) c = _rl_search_getchar(cxt) # We might want to handle EOF here (c == 0) r = _rl_isearch_dispatch(cxt, cxt.lastc) break if (r <= 0) end # The searching is over. The user may have found the string that she # was looking for, or else she may have exited a failing search. If # LINE_INDEX is -1, then that shows that the string searched for was # not found. We use this to determine where to place rl_point. _rl_isearch_cleanup(cxt, r) end def _rl_scxt_alloc(type, flags) cxt = Struct.new(:type,:sflags,:search_string,:search_string_index,:search_string_size,:lines,:allocated_line, :hlen,:hindex,:save_point,:save_mark,:save_line,:last_found_line,:prev_line_found,:save_undo_list,:history_pos, :direction,:lastc,:sline,:sline_len,:sline_index,:search_terminators,:mb).new cxt.type = type cxt.sflags = flags cxt.search_string = nil cxt.search_string_size = cxt.search_string_index = 0 cxt.lines = nil cxt.allocated_line = nil cxt.hlen = cxt.hindex = 0 cxt.save_point = @rl_point cxt.save_mark = @rl_mark cxt.save_line = where_history() cxt.last_found_line = cxt.save_line cxt.prev_line_found = nil cxt.save_undo_list = nil cxt.history_pos = 0 cxt.direction = 0 cxt.lastc = 0 cxt.sline = nil cxt.sline_len = cxt.sline_index = 0 cxt.search_terminators = nil cxt end def history_list() @the_history end def _rl_isearch_init(direction) cxt = _rl_scxt_alloc(RL_SEARCH_ISEARCH, 0) if (direction < 0) cxt.sflags |= SF_REVERSE end cxt.search_terminators = @_rl_isearch_terminators ? @_rl_isearch_terminators : @default_isearch_terminators # Create an arrary of pointers to the lines that we want to search. hlist = history_list() rl_maybe_replace_line() i = 0 if (hlist) i += 1 while(hlist[i]) end # Allocate space for this many lines, +1 for the current input line, # and remember those lines. cxt.hlen = i cxt.lines = [] for i in 0 ... cxt.hlen cxt.lines[i] = hlist[i].line end if (@_rl_saved_line_for_history) cxt.lines[i] = @_rl_saved_line_for_history.line.dup else # Keep track of this so we can free it. cxt.allocated_line = @rl_line_buffer.dup cxt.lines << cxt.allocated_line end cxt.hlen+=1 # The line where we start the search. cxt.history_pos = cxt.save_line rl_save_prompt() # Initialize search parameters. cxt.search_string_size = 128 cxt.search_string_index = 0 cxt.search_string = "" # Normalize DIRECTION into 1 or -1. cxt.direction = (direction >= 0) ? 1 : -1 cxt.sline = @rl_line_buffer cxt.sline_len = cxt.sline.delete(0.chr).length cxt.sline_index = @rl_point @_rl_iscxt = cxt # save globally cxt end def rl_save_prompt() @saved_local_prompt = @local_prompt @saved_local_prefix = @local_prompt_prefix @saved_prefix_length = @prompt_prefix_length @saved_local_length = @local_prompt_len @saved_last_invisible = @prompt_last_invisible @saved_visible_length = @prompt_visible_length @saved_invis_chars_first_line = @prompt_invis_chars_first_line @saved_physical_chars = @prompt_physical_chars @local_prompt = @local_prompt_prefix = nil @local_prompt_len = 0 @prompt_last_invisible = @prompt_visible_length = @prompt_prefix_length = 0 @prompt_invis_chars_first_line = @prompt_physical_chars = 0 end def rl_restore_prompt() @local_prompt = nil @local_prompt_prefix = nil @local_prompt = @saved_local_prompt @local_prompt_prefix = @saved_local_prefix @local_prompt_len = @saved_local_length @prompt_prefix_length = @saved_prefix_length @prompt_last_invisible = @saved_last_invisible @prompt_visible_length = @saved_visible_length @prompt_invis_chars_first_line = @saved_invis_chars_first_line @prompt_physical_chars = @saved_physical_chars # can test saved_local_prompt to see if prompt info has been saved. @saved_local_prompt = @saved_local_prefix = nil @saved_local_length = 0 @saved_last_invisible = @saved_visible_length = @saved_prefix_length = 0 @saved_invis_chars_first_line = @saved_physical_chars = 0 end def rl_message(msg_buf) @rl_display_prompt = msg_buf if @saved_local_prompt.nil? rl_save_prompt() @msg_saved_prompt = true end @local_prompt,@prompt_visible_length,@prompt_last_invisible,@prompt_invis_chars_first_line,@prompt_physical_chars = expand_prompt(msg_buf) @local_prompt_prefix = nil @local_prompt_len = @local_prompt ? @local_prompt.length : 0 send(@rl_redisplay_function) 0 end # Display the current state of the search in the echo-area. # SEARCH_STRING contains the string that is being searched for, # DIRECTION is zero for forward, or non-zero for reverse, # WHERE is the history list number of the current line. If it is # -1, then this line is the starting one. def rl_display_search(search_string, reverse_p, where) message = '(' if (reverse_p) message << "reverse-" end message << "i-search)`" if (search_string) message << search_string end message << "': " rl_message(message) message = nil send(@rl_redisplay_function) end # Transpose the characters at point. If point is at the end of the line, # then transpose the characters before point. def rl_transpose_chars(count, key) return 0 if (count == 0) if (@rl_point==0 || @rl_end < 2) rl_ding() return -1 end rl_begin_undo_group() if (@rl_point == @rl_end) if !@rl_byte_oriented @rl_point = _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO) else @rl_point -= 1 end count = 1 end prev_point = @rl_point if !@rl_byte_oriented @rl_point = _rl_find_prev_mbchar(@rl_line_buffer, @rl_point, MB_FIND_NONZERO) else @rl_point -= 1 end char_length = prev_point - @rl_point dummy = @rl_line_buffer[@rl_point,char_length] rl_delete_text(@rl_point, @rl_point + char_length) @rl_point += count _rl_fix_point(0) rl_insert_text(dummy) rl_end_undo_group() dummy = nil 0 end # Here is C-u doing what Unix does. You don't *have* to use these # key-bindings. We have a choice of killing the entire line, or # killing from where we are to the start of the line. We choose the # latter, because if you are a Unix weenie, then you haven't backspaced # into the line at all, and if you aren't, then you know what you are # doing. def rl_unix_line_discard(count, key) if (@rl_point == 0) rl_ding() else rl_kill_text(@rl_point, 0) @rl_point = 0 if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end 0 end # Yank back the last killed text. This ignores arguments. def rl_yank(count, ignore) if @rl_kill_ring.nil? _rl_abort_internal() return -1 end _rl_set_mark_at_pos(@rl_point) rl_insert_text(@rl_kill_ring[@rl_kill_index]) 0 end # If the last command was yank, or yank_pop, and the text just # before point is identical to the current kill item, then # delete that text from the line, rotate the index down, and # yank back some other text. def rl_yank_pop(count, key) if (((@rl_last_func != :rl_yank_pop) && (@rl_last_func != :rl_yank)) || @rl_kill_ring.nil?) _rl_abort_internal() return -1 end l = @rl_kill_ring[@rl_kill_index].length n = @rl_point - l if (n >= 0 && @rl_line_buffer[n,l] == @rl_kill_ring[@rl_kill_index][0,l]) rl_delete_text(n, @rl_point) @rl_point = n @rl_kill_index-=1 if (@rl_kill_index < 0) @rl_kill_index = @rl_kill_ring_length - 1 end rl_yank(1, 0) return 0 else _rl_abort_internal() return -1 end end # Yank the COUNTh argument from the previous history line, skipping # HISTORY_SKIP lines before looking for the `previous line'. def rl_yank_nth_arg_internal(count, ignore, history_skip) pos = where_history() if (history_skip>0) history_skip.times { entry = previous_history() } end entry = previous_history() history_set_pos(pos) if entry.nil? rl_ding() return -1 end arg = history_arg_extract(count, count, entry.line) if (arg.nil? || arg=='') rl_ding() arg = nil return -1 end rl_begin_undo_group() _rl_set_mark_at_pos(@rl_point) # Vi mode always inserts a space before yanking the argument, and it # inserts it right *after* rl_point. if (@rl_editing_mode == @vi_mode) rl_vi_append_mode(1, ignore) rl_insert_text(" ") end rl_insert_text(arg) arg = nil rl_end_undo_group() return 0 end # Yank the COUNTth argument from the previous history line. def rl_yank_nth_arg(count, ignore) rl_yank_nth_arg_internal(count, ignore, 0) end # Yank the last argument from the previous history line. This `knows' # how rl_yank_nth_arg treats a count of `$'. With an argument, this # behaves the same as rl_yank_nth_arg. @history_skip = 0 @explicit_arg_p = false @count_passed = 1 @direction = 1 @undo_needed = false def rl_yank_last_arg(count, key) if (@rl_last_func != :rl_yank_last_arg) @history_skip = 0 @explicit_arg_p = @rl_explicit_arg @count_passed = count @direction = 1 else if (@undo_needed) rl_do_undo() end if (count < 1) @direction = -@direction end @history_skip += @direction if (@history_skip < 0) @history_skip = 0 end end if (@explicit_arg_p) retval = rl_yank_nth_arg_internal(@count_passed, key, @history_skip) else retval = rl_yank_nth_arg_internal('$', key, @history_skip) end @undo_needed = retval == 0 retval end def _rl_char_search_internal(count, dir, smbchar, len) pos = @rl_point inc = (dir < 0) ? -1 : 1 while (count!=0) if ((dir < 0 && pos <= 0) || (dir > 0 && pos >= @rl_end)) rl_ding() return -1 end pos = (inc > 0) ? _rl_find_next_mbchar(@rl_line_buffer, pos, 1, MB_FIND_ANY) : _rl_find_prev_mbchar(@rl_line_buffer, pos, MB_FIND_ANY) begin if (_rl_is_mbchar_matched(@rl_line_buffer, pos, @rl_end, smbchar, len)!=0) count-=1 if (dir < 0) @rl_point = (dir == BTO) ? pos+1 : pos else @rl_point = (dir == FTO) ? pos-1 : pos end break end prepos = pos end while ((dir < 0) ? (pos = _rl_find_prev_mbchar(@rl_line_buffer, pos, MB_FIND_ANY)) != prepos : (pos = _rl_find_next_mbchar(@rl_line_buffer, pos, 1, MB_FIND_ANY)) != prepos) end 0 end def _rl_char_search(count, fdir, bdir) mbchar = '' mb_len = _rl_read_mbchar(mbchar, MB_LEN_MAX) if (count < 0) return (_rl_char_search_internal(-count, bdir, mbchar, mb_len)) else return (_rl_char_search_internal(count, fdir, mbchar, mb_len)) end end def rl_char_search(count, key) _rl_char_search(count, FFIND, BFIND) end # Undo the next thing in the list. Return 0 if there # is nothing to undo, or non-zero if there was. def trans(i) ((i) == -1 ? @rl_point : ((i) == -2 ? @rl_end : (i))) end def rl_do_undo() start = _end = waiting_for_begin = 0 begin return 0 if @rl_undo_list.nil? @_rl_doing_an_undo = true rl_setstate(RL_STATE_UNDOING) # To better support vi-mode, a start or end value of -1 means # rl_point, and a value of -2 means rl_end. if (@rl_undo_list.what == UNDO_DELETE || @rl_undo_list.what == UNDO_INSERT) start = trans(@rl_undo_list.start) _end = trans(@rl_undo_list.end) end case (@rl_undo_list.what) # Undoing deletes means inserting some text. when UNDO_DELETE @rl_point = start rl_insert_text(@rl_undo_list.text) @rl_undo_list.text = nil # Undoing inserts means deleting some text. when UNDO_INSERT rl_delete_text(start, _end) @rl_point = start # Undoing an END means undoing everything 'til we get to a BEGIN. when UNDO_END waiting_for_begin+=1 # Undoing a BEGIN means that we are done with this group. when UNDO_BEGIN if (waiting_for_begin!=0) waiting_for_begin-=1 else rl_ding() end end @_rl_doing_an_undo = false rl_unsetstate(RL_STATE_UNDOING) release = @rl_undo_list @rl_undo_list = @rl_undo_list.next replace_history_data(-1, release, @rl_undo_list) release = nil end while (waiting_for_begin!=0) 1 end # Do some undoing of things that were done. def rl_undo_command(count, key) if (count < 0) return 0 # Nothing to do. end while (count>0) if (rl_do_undo()) count-=1 else rl_ding() break end end 0 end # Delete the word at point, saving the text in the kill ring. def rl_kill_word(count, key) if (count < 0) return (rl_backward_kill_word(-count, key)) else orig_point = @rl_point rl_forward_word(count, key) if (@rl_point != orig_point) rl_kill_text(orig_point, @rl_point) end @rl_point = orig_point if (@rl_editing_mode == @emacs_mode) rl_mark = @rl_point end end 0 end # Rubout the word before point, placing it on the kill ring. def rl_backward_kill_word(count, ignore) if (count < 0) return (rl_kill_word(-count, ignore)) else orig_point = @rl_point rl_backward_word(count, ignore) if (@rl_point != orig_point) rl_kill_text(orig_point, @rl_point) end if (@rl_editing_mode == @emacs_mode) @rl_mark = @rl_point end end 0 end # Revert the current line to its previous state. def rl_revert_line(count, key) if @rl_undo_list.nil? rl_ding() else while (@rl_undo_list) rl_do_undo() end if (@rl_editing_mode == @vi_mode) @rl_point = @rl_mark = 0 # rl_end should be set correctly end end 0 end def rl_backward_char_search (count, key) _rl_char_search(count, BFIND, FFIND) end def rl_insert_completions(ignore, invoking_key) rl_complete_internal('*') end def _rl_arg_init() rl_save_prompt() @_rl_argcxt = 0 rl_setstate(RL_STATE_NUMERICARG) end def _rl_arg_getchar() rl_message("(arg: #{@rl_arg_sign * @rl_numeric_arg}) ") rl_setstate(RL_STATE_MOREINPUT) c = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) c end # Process C as part of the current numeric argument. Return -1 if the # argument should be aborted, 0 if we should not read any more chars, and # 1 if we should continue to read chars. def _rl_arg_dispatch(cxt, c) key = c # If we see a key bound to `universal-argument' after seeing digits, # it ends the argument but is otherwise ignored. if (@_rl_keymap[c] == :rl_universal_argument) if ((cxt & NUM_SAWDIGITS) == 0) @rl_numeric_arg *= 4 return 1 elsif (rl_isstate(RL_STATE_CALLBACK)) @_rl_argcxt |= NUM_READONE return 0 # XXX else rl_setstate(RL_STATE_MOREINPUT) key = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) rl_restore_prompt() rl_clear_message() rl_unsetstate(RL_STATE_NUMERICARG) return (_rl_dispatch(key, @_rl_keymap)) end end #c = (c[0].ord & ~0x80).chr r = c[1,1] if (r>='0' && r<='9') r = r.to_i @rl_numeric_arg = @rl_explicit_arg ? (@rl_numeric_arg * 10) + r : r @rl_explicit_arg = 1 @_rl_argcxt |= NUM_SAWDIGITS elsif (c == '-' && !@rl_explicit_arg) @rl_numeric_arg = 1 @_rl_argcxt |= NUM_SAWMINUS @rl_arg_sign = -1 else # Make M-- command equivalent to M--1 command. if ((@_rl_argcxt & NUM_SAWMINUS)!=0 && @rl_numeric_arg == 1 && !@rl_explicit_arg) @rl_explicit_arg = 1 end rl_restore_prompt() rl_clear_message() rl_unsetstate(RL_STATE_NUMERICARG) r = _rl_dispatch(key, @_rl_keymap) if (rl_isstate(RL_STATE_CALLBACK)) # At worst, this will cause an extra redisplay. Otherwise, # we have to wait until the next character comes in. if (!@rl_done) send(@rl_redisplay_function) end r = 0 end return r end 1 end def _rl_arg_overflow() if (@rl_numeric_arg > 1000000) @_rl_argcxt = 0 @rl_explicit_arg = @rl_numeric_arg = 0 rl_ding() rl_restore_prompt() rl_clear_message() rl_unsetstate(RL_STATE_NUMERICARG) return 1 end 0 end # Handle C-u style numeric args, as well as M--, and M-digits. def rl_digit_loop() while (true) return 1 if _rl_arg_overflow()!=0 c = _rl_arg_getchar() if (c >= "\xFE") _rl_abort_internal() return -1 end r = _rl_arg_dispatch(@_rl_argcxt, c) break if (r <= 0 || !rl_isstate(RL_STATE_NUMERICARG)) end return r end # Start a numeric argument with initial value KEY def rl_digit_argument(ignore, key) _rl_arg_init() if (rl_isstate(RL_STATE_CALLBACK)) _rl_arg_dispatch(@_rl_argcxt, key) rl_message("(arg: #{@rl_arg_sign * @rl_numeric_arg}) ") return 0 else rl_execute_next(key) return (rl_digit_loop()) end end # Make C be the next command to be executed. def rl_execute_next(c) @rl_pending_input = c rl_setstate(RL_STATE_INPUTPENDING) 0 end # Meta-< goes to the start of the history. def rl_beginning_of_history(count, key) rl_get_previous_history(1 + where_history(), key) end # Meta-> goes to the end of the history. (The current line). def rl_end_of_history(count, key) rl_maybe_replace_line() using_history() rl_maybe_unsave_line() 0 end # Uppercase the word at point. def rl_upcase_word(count, key) rl_change_case(count, UpCase) end # Lowercase the word at point. def rl_downcase_word(count, key) rl_change_case(count, DownCase) end # Upcase the first letter, downcase the rest. def rl_capitalize_word(count, key) rl_change_case(count, CapCase) end # Save an undo entry for the text from START to END. def rl_modifying(start, _end) if (start > _end) start,_end = _end,start end if (start != _end) temp = rl_copy_text(start, _end) rl_begin_undo_group() rl_add_undo(UNDO_DELETE, start, _end, temp) rl_add_undo(UNDO_INSERT, start, _end, nil) rl_end_undo_group() end 0 end # The meaty function. # Change the case of COUNT words, performing OP on them. # OP is one of UpCase, DownCase, or CapCase. # If a negative argument is given, leave point where it started, # otherwise, leave it where it moves to. def rl_change_case(count, op) start = @rl_point rl_forward_word(count, 0) _end = @rl_point if (op != UpCase && op != DownCase && op != CapCase) rl_ding() return -1 end if (count < 0) start,_end = _end,start end # We are going to modify some text, so let's prepare to undo it. rl_modifying(start, _end) inword = false while (start < _end) c = _rl_char_value(@rl_line_buffer, start) # This assumes that the upper and lower case versions are the same width. if !@rl_byte_oriented _next = _rl_find_next_mbchar(@rl_line_buffer, start, 1, MB_FIND_NONZERO) else _next = start + 1 end if (!_rl_walphabetic(c)) inword = false start = _next next end if (op == CapCase) nop = inword ? DownCase : UpCase inword = true else nop = op end if (isascii(c)) nc = (nop == UpCase) ? c.upcase : c.downcase @rl_line_buffer[start] = nc end start = _next end @rl_point = _end 0 end def isascii(c) int_val = c[0].to_i # 1.8 + 1.9 compat. return (int_val < 128 && int_val > 0) end # Search non-interactively through the history list. DIR < 0 means to # search backwards through the history of previous commands; otherwise # the search is for commands subsequent to the current position in the # history list. PCHAR is the character to use for prompting when reading # the search string; if not specified (0), it defaults to `:'. def noninc_search(dir, pchar) cxt = _rl_nsearch_init(dir, pchar) if (rl_isstate(RL_STATE_CALLBACK)) return (0) end # Read the search string. r = 0 while (true) c = _rl_search_getchar(cxt) if (c == 0.chr) break end r = _rl_nsearch_dispatch(cxt, c) if (r < 0) return 1 elsif (r == 0) break end end r = _rl_nsearch_dosearch(cxt) (r >= 0) ? _rl_nsearch_cleanup(cxt, r) : (r != 1) end # Search forward through the history list for a string. If the vi-mode # code calls this, KEY will be `?'. def rl_noninc_forward_search(count, key) noninc_search(1, (key == '?') ? '?' : nil) end # Reverse search the history list for a string. If the vi-mode code # calls this, KEY will be `/'. def rl_noninc_reverse_search(count, key) noninc_search(-1, (key == '/') ? '/' : nil) end # Make the data from the history entry ENTRY be the contents of the # current line. This doesn't do anything with rl_point; the caller # must set it. def make_history_line_current(entry) _rl_replace_text(entry.line, 0, @rl_end) _rl_fix_point(1) if (@rl_editing_mode == @vi_mode) # POSIX.2 says that the `U' command doesn't affect the copy of any # command lines to the edit line. We're going to implement that by # making the undo list start after the matching line is copied to the # current editing buffer. rl_free_undo_list() end if (@_rl_saved_line_for_history) @_rl_saved_line_for_history = nil end end # Make the current history item be the one at POS, an absolute index. # Returns zero if POS is out of range, else non-zero. def history_set_pos(pos) if (pos > @history_length || pos < 0 || @the_history.nil?) return (0) end @history_offset = pos 1 end # Do an anchored search for string through the history in DIRECTION. def history_search_prefix (string, direction) history_search_internal(string, direction, ANCHORED_SEARCH) end # Search for STRING in the history list. DIR is < 0 for searching # backwards. POS is an absolute index into the history list at # which point to begin searching. def history_search_pos(string, dir, pos) old = where_history() history_set_pos(pos) if (history_search(string, dir) == -1) history_set_pos(old) return (-1) end ret = where_history() history_set_pos(old) ret end # Search the history list for STRING starting at absolute history position # POS. If STRING begins with `^', the search must match STRING at the # beginning of a history line, otherwise a full substring match is performed # for STRING. DIR < 0 means to search backwards through the history list, # DIR >= 0 means to search forward. def noninc_search_from_pos(string, pos, dir) return 1 if (pos < 0) old = where_history() return -1 if (history_set_pos(pos) == 0) rl_setstate(RL_STATE_SEARCH) if (string[0,1] == '^') ret = history_search_prefix(string + 1, dir) else ret = history_search(string, dir) end rl_unsetstate(RL_STATE_SEARCH) if (ret != -1) ret = where_history() end history_set_pos(old) ret end # Search for a line in the history containing STRING. If DIR is < 0, the # search is backwards through previous entries, else through subsequent # entries. Returns 1 if the search was successful, 0 otherwise. def noninc_dosearch(string, dir) if (string.nil? || string == '' || @noninc_history_pos < 0) rl_ding() return 0 end pos = noninc_search_from_pos(string, @noninc_history_pos + dir, dir) if (pos == -1) # Search failed, current history position unchanged. rl_maybe_unsave_line() rl_clear_message() @rl_point = 0 rl_ding() return 0 end @noninc_history_pos = pos oldpos = where_history() history_set_pos(@noninc_history_pos) entry = current_history() if (@rl_editing_mode != @vi_mode) history_set_pos(oldpos) end make_history_line_current(entry) @rl_point = 0 @rl_mark = @rl_end rl_clear_message() 1 end def _rl_make_prompt_for_search(pchar) rl_save_prompt() # We've saved the prompt, and can do anything with the various prompt # strings we need before they're restored. We want the unexpanded # portion of the prompt string after any final newline. _p = @rl_prompt ? @rl_prompt.rindex("\n") : nil if _p.nil? len = (@rl_prompt && @rl_prompt.length>0 ) ? @rl_prompt.length : 0 if (len>0) pmt = @rl_prompt.dup else pmt = '' end pmt << pchar else _p+=1 pmt = @rl_prompt[_p..-1] pmt << pchar end # will be overwritten by expand_prompt, called from rl_message @prompt_physical_chars = @saved_physical_chars + 1 pmt end def _rl_nsearch_init(dir, pchar) cxt = _rl_scxt_alloc(RL_SEARCH_NSEARCH, 0) if (dir < 0) cxt.sflags |= SF_REVERSE # not strictly needed end cxt.direction = dir cxt.history_pos = cxt.save_line rl_maybe_save_line() # Clear the undo list, since reading the search string should create its # own undo list, and the whole list will end up being freed when we # finish reading the search string. @rl_undo_list = nil # Use the line buffer to read the search string. @rl_line_buffer[0,1] = 0.chr @rl_end = @rl_point = 0 _p = _rl_make_prompt_for_search(pchar ? pchar : ':') rl_message(_p) _p = nil rl_setstate(RL_STATE_NSEARCH) @_rl_nscxt = cxt cxt end def _rl_nsearch_cleanup(cxt, r) cxt = nil @_rl_nscxt = nil rl_unsetstate(RL_STATE_NSEARCH) r != 1 end def _rl_nsearch_abort(cxt) rl_maybe_unsave_line() rl_clear_message() @rl_point = cxt.save_point @rl_mark = cxt.save_mark rl_restore_prompt() rl_unsetstate(RL_STATE_NSEARCH) end # Process just-read character C according to search context CXT. Return -1 # if the caller should abort the search, 0 if we should break out of the # loop, and 1 if we should continue to read characters. def _rl_nsearch_dispatch(cxt, c) case (c) when "\C-W" rl_unix_word_rubout(1, c) when "\C-W" rl_unix_line_discard(1, c) when RETURN,NEWLINE return 0 when "\C-H",RUBOUT if (@rl_point == 0) _rl_nsearch_abort(cxt) return -1 end _rl_rubout_char(1, c) when "\C-C","\C-G" rl_ding() _rl_nsearch_abort(cxt) return -1 else if !@rl_byte_oriented rl_insert_text(cxt.mb) else _rl_insert_char(1, c) end end send(@rl_redisplay_function) 1 end # Perform one search according to CXT, using NONINC_SEARCH_STRING. Return # -1 if the search should be aborted, any other value means to clean up # using _rl_nsearch_cleanup (). Returns 1 if the search was successful, # 0 otherwise. def _rl_nsearch_dosearch(cxt) @rl_mark = cxt.save_mark # If rl_point == 0, we want to re-use the previous search string and # start from the saved history position. If there's no previous search # string, punt. if (@rl_point == 0) if @noninc_search_string.nil? rl_ding() rl_restore_prompt() rl_unsetstate(RL_STATE_NSEARCH) return -1 end else # We want to start the search from the current history position. @noninc_history_pos = cxt.save_line @noninc_search_string = @rl_line_buffer.dup # If we don't want the subsequent undo list generated by the search #matching a history line to include the contents of the search string, #we need to clear rl_line_buffer here. For now, we just clear the #undo list generated by reading the search string. (If the search #fails, the old undo list will be restored by rl_maybe_unsave_line.) rl_free_undo_list() end rl_restore_prompt() noninc_dosearch(@noninc_search_string, cxt.direction) end # Transpose the words at point. If point is at the end of the line, # transpose the two words before point. def rl_transpose_words(count, key) orig_point = @rl_point return if (count==0) # Find the two words. rl_forward_word(count, key) w2_end = @rl_point rl_backward_word(1, key) w2_beg = @rl_point rl_backward_word(count, key) w1_beg = @rl_point rl_forward_word(1, key) w1_end = @rl_point # Do some check to make sure that there really are two words. if ((w1_beg == w2_beg) || (w2_beg < w1_end)) rl_ding() @rl_point = orig_point return -1 end # Get the text of the words. word1 = rl_copy_text(w1_beg, w1_end) word2 = rl_copy_text(w2_beg, w2_end) # We are about to do many insertions and deletions. Remember them # as one operation. rl_begin_undo_group() # Do the stuff at word2 first, so that we don't have to worry # about word1 moving. @rl_point = w2_beg rl_delete_text(w2_beg, w2_end) rl_insert_text(word1) @rl_point = w1_beg rl_delete_text(w1_beg, w1_end) rl_insert_text(word2) # This is exactly correct since the text before this point has not # changed in length. @rl_point = w2_end # I think that does it. rl_end_undo_group() word1 = nil word2 = nil 0 end # Re-read the current keybindings file. def rl_re_read_init_file(count, ignore) r = rl_read_init_file(nil) rl_set_keymap_from_edit_mode() r end # Exchange the position of mark and point. def rl_exchange_point_and_mark(count, key) if (@rl_mark > @rl_end) @rl_mark = -1 end if (@rl_mark == -1) rl_ding() return -1 else @rl_point, @rl_mark = @rl_mark, @rl_point end 0 end # A convenience function for displaying a list of strings in # columnar format on readline's output stream. MATCHES is the list # of strings, in argv format, LEN is the number of strings in MATCHES, # and MAX is the length of the longest string in MATCHES. def rl_display_match_list(matches, len, max) # How many items of MAX length can we fit in the screen window? max += 2 limit = @_rl_screenwidth / max if (limit != 1 && (limit * max == @_rl_screenwidth)) limit-=1 end # Avoid a possible floating exception. If max > _rl_screenwidth, # limit will be 0 and a divide-by-zero fault will result. if (limit == 0) limit = 1 end # How many iterations of the printing loop? count = (len + (limit - 1)) / limit # Watch out for special case. If LEN is less than LIMIT, then # just do the inner printing loop. # 0 < len <= limit implies count = 1. # Sort the items if they are not already sorted. if (!@rl_ignore_completion_duplicates) matches[1,len] = matches[1,len].sort end rl_crlf() lines = 0 if (!@_rl_print_completions_horizontally) # Print the sorted items, up-and-down alphabetically, like ls. for i in 1 .. count l = i for j in 0 ... limit if (l > len || matches[l].nil?) break else temp = printable_part(matches[l]) printed_len = print_filename(temp, matches[l]) if (j + 1 < limit) @rl_outstream.write(' '*(max - printed_len)) end end l += count end rl_crlf() lines+=1 if (@_rl_page_completions && lines >= (@_rl_screenheight - 1) && i < count) lines = _rl_internal_pager(lines) return if (lines < 0) end end else # Print the sorted items, across alphabetically, like ls -x. i = 1 while(matches[i]) temp = printable_part(matches[i]) printed_len = print_filename(temp, matches[i]) # Have we reached the end of this line? if (matches[i+1]) if ((limit > 1) && (i % limit) == 0) rl_crlf() lines+=1 if (@_rl_page_completions && lines >= @_rl_screenheight - 1) lines = _rl_internal_pager(lines) return if (lines < 0) end else @rl_outstream.write(' '*(max - printed_len)) end end i += 1 end rl_crlf() end end # Append any necessary closing quote and a separator character to the # just-inserted match. If the user has specified that directories # should be marked by a trailing `/', append one of those instead. The # default trailing character is a space. Returns the number of characters # appended. If NONTRIVIAL_MATCH is set, we test for a symlink (if the OS # has them) and don't add a suffix for a symlink to a directory. A # nontrivial match is one that actually adds to the word being completed. # The variable rl_completion_mark_symlink_dirs controls this behavior # (it's initially set to the what the user has chosen, indicated by the # value of _rl_complete_mark_symlink_dirs, but may be modified by an # application's completion function). def append_to_match(text, delimiter, quote_char, nontrivial_match) temp_string = 0.chr * 4 temp_string_index = 0 if (quote_char && @rl_point>0 && !@rl_completion_suppress_quote && @rl_line_buffer[@rl_point - 1,1] != quote_char) temp_string[temp_string_index] = quote_char temp_string_index += 1 end if (delimiter != 0.chr) temp_string[temp_string_index] = delimiter temp_string_index += 1 elsif (!@rl_completion_suppress_append && @rl_completion_append_character) temp_string[temp_string_index] = @rl_completion_append_character temp_string_index += 1 end temp_string[temp_string_index] = 0.chr temp_string_index += 1 if (@rl_filename_completion_desired) filename = File.expand_path(text) s = (nontrivial_match && !@rl_completion_mark_symlink_dirs) ? File.lstat(filename) : File.stat(filename) if s.directory? if @_rl_complete_mark_directories # This is clumsy. Avoid putting in a double slash if point # is at the end of the line and the previous character is a # slash. if (@rl_point>0 && @rl_line_buffer[@rl_point,1] == 0.chr && @rl_line_buffer[@rl_point - 1,1] == '/' ) elsif (@rl_line_buffer[@rl_point,1] != '/') rl_insert_text('/') end end # Don't add anything if the filename is a symlink and resolves to a # directory. elsif s.symlink? && File.stat(filename).directory? else if (@rl_point == @rl_end && temp_string_index>0) rl_insert_text(temp_string) end end filename = nil else if (@rl_point == @rl_end && temp_string_index>0) rl_insert_text(temp_string) end end temp_string_index end # Stifle the history list, remembering only MAX number of lines. def stifle_history(max) max = 0 if (max < 0) if (@history_length > max) @the_history.slice!(0,(@history_length - max)) @history_length = max end @history_stifled = true @max_input_history = @history_max_entries = max end # Stop stifling the history. This returns the previous maximum # number of history entries. The value is positive if the history # was stifled, negative if it wasn't. def unstifle_history() if (@history_stifled) @history_stifled = false return (@history_max_entries) else return (-@history_max_entries) end end def history_is_stifled() return (@history_stifled) end def clear_history() @the_history = nil @history_offset = @history_length = 0 end # Insert COUNT characters from STRING to the output stream at column COL. def insert_some_chars(string, count, col) if @hConsoleHandle _rl_output_some_chars(string,0,count) else # DEBUGGING if (@rl_byte_oriented) if (count != col) $stderr.write("readline: debug: insert_some_chars: count (#{count}) != col (#{col})\n"); end end # If IC is defined, then we do not have to "enter" insert mode. #if (@_rl_term_IC) # buffer = tgoto(@_rl_term_IC, 0, col) # @_rl_out_stream.write(buffer) # _rl_output_some_chars(string,0,count) #else # If we have to turn on insert-mode, then do so. if (@_rl_term_im) @_rl_out_stream.write(@_rl_term_im) end # If there is a special command for inserting characters, then # use that first to open up the space. if (@_rl_term_ic) @_rl_out_stream.write(@_rl_term_ic * count) end # Print the text. _rl_output_some_chars(string,0, count) # If there is a string to turn off insert mode, we had best use # it now. if (@_rl_term_ei) @_rl_out_stream.write(@_rl_term_ei) end #end end end # Delete COUNT characters from the display line. def delete_chars(count) return if (count > @_rl_screenwidth) # XXX if @hConsoleHandle.nil? #if (@_rl_term_DC) # buffer = tgoto(_rl_term_DC, count, count); # @_rl_out_stream.write(buffer * count) #else if (@_rl_term_dc) @_rl_out_stream.write(@_rl_term_dc * count) end #end end end # adjust pointed byte and find mbstate of the point of string. # adjusted point will be point <= adjusted_point, and returns # differences of the byte(adjusted_point - point). # if point is invalied (point < 0 || more than string length), # it returns -1 def _rl_adjust_point(string, point) length = string.length return -1 if (point < 0) return -1 if (length < point) pos = 0 case @encoding when 'E' pos = string.scan(/./me).inject(0){|r,x| r= str.length end point end # Find previous character started byte point of the specified seed. # Returned point will be point <= seed. If flags is MB_FIND_NONZERO, # we look for non-zero-width multibyte characters. def _rl_find_prev_mbchar(string, seed, flags) if @encoding == 'N' return ((seed == 0) ? seed : seed - 1) end length = string.length if seed < 0 return 0 elsif length < seed return length end case @encoding when 'E' string[0,seed].scan(/./me)[0..-2].to_s.length when 'S' string[0,seed].scan(/./ms)[0..-2].to_s.length when 'U' string[0,seed].scan(/./mu)[0..-2].to_s.length when 'X' string[0,seed].force_encoding(@encoding_name)[0..-2].bytesize end end # compare the specified two characters. If the characters matched, # return true. Otherwise return false. def _rl_compare_chars(buf1, pos1, buf2, pos2) return false if buf1[pos1].nil? || buf2[pos2].nil? case @encoding when 'E' buf1[pos1..-1].scan(/./me)[0] == buf2[pos2..-1].scan(/./me)[0] when 'S' buf1[pos1..-1].scan(/./ms)[0] == buf2[pos2..-1].scan(/./ms)[0] when 'U' buf1[pos1..-1].scan(/./mu)[0] == buf2[pos2..-1].scan(/./mu)[0] when 'X' buf1[pos1..-1].force_encoding(@encoding_name)[0] == buf2[pos2..-1].force_encoding(@encoding_name)[0] else buf1[pos1] == buf2[pos2] end end # return the number of bytes parsed from the multibyte sequence starting # at src, if a non-L'\0' wide character was recognized. It returns 0, # if a L'\0' wide character was recognized. It returns (size_t)(-1), # if an invalid multibyte sequence was encountered. It returns (size_t)(-2) # if it couldn't parse a complete multibyte character. def _rl_get_char_len(src) return 0 if src[0,1] == 0.chr || src.length==0 case @encoding when 'E' len = src.scan(/./me)[0].to_s.length when 'S' len = src.scan(/./ms)[0].to_s.length when 'U' len = src.scan(/./mu)[0].to_s.length when 'X' src = src.dup.force_encoding(@encoding_name) len = src.valid_encoding? ? src[0].bytesize : 0 else len = 1 end len==0 ? -2 : len end # read multibyte char def _rl_read_mbchar(mbchar, size) mb_len = 0 while (mb_len < size) rl_setstate(RL_STATE_MOREINPUT) mbchar << rl_read_key() mb_len += 1 rl_unsetstate(RL_STATE_MOREINPUT) case @encoding when 'E' break unless mbchar.scan(/./me).empty? when 'S' break unless mbchar.scan(/./ms).empty? when 'U' break unless mbchar.scan(/./mu).empty? when 'X' break if mbchar.dup.force_encoding(@encoding_name).valid_encoding? end end mb_len end # Read a multibyte-character string whose first character is FIRST into # the buffer MB of length MLEN. Returns the last character read, which # may be FIRST. Used by the search functions, among others. Very similar # to _rl_read_mbchar. def _rl_read_mbstring(first, mb, mlen) c = first for i in 0 ... mlen mb << c if _rl_get_char_len(mb) == -2 # Read more for multibyte character rl_setstate(RL_STATE_MOREINPUT) c = rl_read_key() rl_unsetstate(RL_STATE_MOREINPUT) else break end end c end def _rl_is_mbchar_matched(string, seed, _end, mbchar, length) return 0 if ((_end - seed) < length) for i in 0 ... length if (string[seed + i] != mbchar[i]) return 0 end end 1 end # Redraw the last line of a multi-line prompt that may possibly contain # terminal escape sequences. Called with the cursor at column 0 of the # line to draw the prompt on. def redraw_prompt(t) oldp = @rl_display_prompt rl_save_prompt() @rl_display_prompt = t @local_prompt,@prompt_visible_length,@prompt_last_invisible,@prompt_invis_chars_first_line,@prompt_physical_chars = expand_prompt(t) @local_prompt_prefix = nil @local_prompt_len = @local_prompt ? @local_prompt.length : 0 rl_forced_update_display() @rl_display_prompt = oldp rl_restore_prompt() end # Redisplay the current line after a SIGWINCH is received. def _rl_redisplay_after_sigwinch() # Clear the current line and put the cursor at column 0. Make sure # the right thing happens if we have wrapped to a new screen line. if @_rl_term_cr @rl_outstream.write(@_rl_term_cr) @_rl_last_c_pos = 0 if @_rl_term_clreol @rl_outstream.write(@_rl_term_clreol) else space_to_eol(@_rl_screenwidth) @rl_outstream.write(@_rl_term_cr) end if @_rl_last_v_pos > 0 _rl_move_vert(0) end else rl_crlf() end # Redraw only the last line of a multi-line prompt. t = @rl_display_prompt.index("\n") if t redraw_prompt(@rl_display_prompt[(t+1)..-1]) else rl_forced_update_display() end end def rl_resize_terminal() if @readline_echoing_p _rl_get_screen_size(@rl_instream.fileno, 1) if @rl_redisplay_function != :rl_redisplay rl_forced_update_display() else _rl_redisplay_after_sigwinch() end end end def rl_sigwinch_handler(sig) rl_setstate(RL_STATE_SIGHANDLER) rl_resize_terminal() rl_unsetstate(RL_STATE_SIGHANDLER) end module_function :rl_attempted_completion_function,:rl_deprep_term_function, :rl_event_hook,:rl_attempted_completion_over,:rl_basic_quote_characters, :rl_basic_word_break_characters,:rl_completer_quote_characters, :rl_completer_word_break_characters,:rl_completion_append_character, :rl_filename_quote_characters,:rl_instream,:rl_library_version,:rl_outstream, :rl_readline_name, :rl_attempted_completion_function=,:rl_deprep_term_function=, :rl_event_hook=,:rl_attempted_completion_over=,:rl_basic_quote_characters=, :rl_basic_word_break_characters=,:rl_completer_quote_characters=, :rl_completer_word_break_characters=,:rl_completion_append_character=, :rl_filename_quote_characters=,:rl_instream=,:rl_library_version=,:rl_outstream=, :rl_readline_name=,:history_length,:history_base def no_terminal? term = ENV["TERM"] term.nil? || (term == 'dumb') || (term == 'cygwin' && RUBY_PLATFORM =~ /mswin|mingw/) end private :no_terminal? end