* Fixes a bug in shikata where input greater than 0xffff length would
still use 16-bit counter
* Short circuits finding bad xor keys if there are no bad characters to
avoid
* Fixes huge performance issue with large inputs to xor-based encoders
due to the use of String#+ instead of String#<< in a loop. It now
takes ~3 seconds on modern hardware to encode a 750kB buffer with
shikata where it used to take more than 10 minutes. The decoding side
takes a similar amount of time and will increase the wait between
sending the second stage and opening a usable session by several
seconds.
I believe this addresses the intent of pull request 905
[See #905]
[FixRM #7539] - The valid?() function will first normalize() the
user-supplied input before validation. The problem is that the
normalize() function will ALWAYS convert data to integer, therefore
whatever you validate, you will always get true. For example:
when I do "yomama".to_i, that returns 0, and of course will pass
integer validation.
When db_disconnect is issued, this funtion does not update the status
of self.migrated to false. So when another reload command is used,
the update_module_details function will still try to connect to the
database, which causes the "Failed to reload" error.
If BufferRegister is in lower-case, then gen_decoder_prefix will
return nil. When the return value is nil, other functions like
gen_decoder() will backtrace due to a "undefined method "+" for nil"
error. Therefore, this input should NOT be case-sensitive.
Also, if for some reason the user supplies an invalid BufferRegister,
the function should be aware of that and warn the user about the
bad input.
-changed the suspend/resume loop logic to reduce code duplication.
-fixed up some print_*'s to remove embedded \n's
-changed formatting on some error messages
-switched comment to a TODO:
-change host_processes.select (blah} to use .find instead
-adjusted code due to remvoal of the pids.dup, resulting in arr_pids
disappearing
in validate_pids no longer need dup as conversion to ints was cleaned
up to use map. Which also improved readability and allowed adding uniq
and compact, thanks egypt.
YARD doc on cmd_suspend was incorrectly organized
This fully fixes RM7223 and adds the suspend command to the meterpreter
interface.
Suspend allows you to suspend and resume running processes on the
targethost. It was originally written as a post module (and the dll
version will be submitted as such later), but egypt suggested I add it
to meterpreter
also adds YARD doc to cmd_migrate in collusion with egypt.
low threat change, but still tested on Win7-32 sp0, ruby 1.9.3-p125,
Framework Version: 4.6.0-dev just for kicks
Netsparker puts requests, responses, and info for vulns inside a cdata
(which makes sense because it's usually html snippets). This commit
handles that so report_web_vuln will actually be somewhat useful. Note
that the request is ignored by report_web_vuln despite there being a
place for it in the WebVuln model.
[SeeRM #7665]
* This mixin standardizes the previously ad-hoc deprecation warnings on
modules that have been moved.
* Uses the mixin in 3 existing modules that already have (or should have
had) deprecation warnings.
* Adds Exploit::EXE to windows/postgres/postgres_payload. This gives us
the ability to use generate_payload_dll() which generates a generic dll
that spawns rundll32 and runs the shellcode in that process. This is
basically what the linux version accomplishes by compiling the .so on
the fly. On major advantage of this is that the resulting DLL will
work on pretty much any version of postgres
* Adds Exploit::FileDropper to windows version as well. This gives us
the ability to delete the dll via the resulting session, which works
because the template dll contains code to shove the shellcode into a
new rundll32 process and exit, thus leaving the file closed after
Postgres calls FreeLibrary.
* Adds pre-auth fingerprints for 9.1.5 and 9.1.6 on Ubuntu and 9.2.1 on
Windows
* Adds a check method to both Windows and Linux versions that simply
makes sure that the given credentials work against the target service.
* Replaces the version-specific lo_create method with a generic
technique that works on both 9.x and 8.x
* Fixes a bug when targeting 9.x; "language C" in the UDF creation query
gets downcased and subsequently causes postgres to error out before
opening the DLL
* Cleans up lots of rdoc in Exploit::Postgres
Note that only a custom module that allows for users to pass arguments
to nmap would be capable of hitting the error condition. Right now, only
auxiliary/scanner/oracle/oracle_login traverses the codepath, and that
doesn't allow for arbitrary args passed to nmap.
So... without contriving an example, it should be impossible to
experience or test.
[FixRM #7641]
created a new advanced option "HttpUknownRequestResponse" that will be sent back in the HTML body of unknown requests instead of the old static "No site configured at this address" message.
[SEERM #7294]
[Bug #40937817]
* exploit/multi/handler no longer filtered out from vuln creation and
other steps
* Name changed to parent module's name in session storage so we show something more helpful
than generic handler
* Same for vuln and attempt creation
... since super doesn't exist any more.
Also changes to using ModuleSet#[] inside ModuleManager#[] instead of
ModuleSet#create to mimic original behavior when ModuleManager was a
subclass of ModuleSet.
When we know the module we're creating is definitely a payload, don't
bother looking in the other module sets.
Also removes an exception message that gets ignored anyway because the
exception class has a hard-coded #to_s
Instead of deleting all non-symbolics before the re-adding phase of
PayloadSet#recalculate, store a list of old module names, populate a
list of new ones during the re-adding phase, and finally remove any
non-symbolic module that was in the old list but wasn't in the new list.
Also includes a minor refactoring to make ModuleManager its own thing
instead of being an awkard subclass of ModuleSet. Now PayloadSet doesn't
need to know about the existence of framework.modules, which makes the
separation a little more natural.
[FixRM #7037]
Sometimes, the database is active but the cache isn't filled out, or
doesn't contain the module you want. This can come up especially when
msfconsole first starts and you are programmatically searching for
modules, for whatever reason.
This allows for falling back to the regular (slow) search in the event
no hits have been returned. It does not actually address the caching
problem seen in QA, but it's generally going to be Good Enough. Search
is getting overhauled Real Soon Now anyway.
[FixRM #7533]
::File.find did not return an Enumerable when not given a block in
1.8.7; instead it un-idiomatically just raised an exception. The
solution is just to give the block directly to .find instead of trying
to call #each on its return value.
[FixRM #7499]
Makes it work when using meterpreter. Because "quit" or "exit" in the
console ends up calling die() instead of falling through to whatever's
left in the file, a meterpreter session would never reach the code to
delete itself before this change.
[Fixes#38426061, #38097411]
Msf::Modules::Loader::Directory#read_module_content may calculate a non-existent
module_path that gets passed to File.open causing an Errno::ENOENT exception
to be raised when using the module cache with a module that has been
moved to a new path (as is the case that originally found this bug) or
deleted. Now, the exception is rescued and read_module_content returns
an empty string (''), which load_module detects with
module_content.empty? and returns earlier without attempting to module
eval the (empty) content.
As having Msf::Modules::Loader::Directory#read_module_content rescue the
exception, meant there was another place that needed to log and error
and store an error in Msf::ModuleManager#module_load_error_by_path, I
refactored the error reporting to call
Msf::Modules::Loader::Base#load_error, which handles writing to the log
and setting the Hash, so the error reporting is consistent across the
loaders.
The exception hierarchy was also refactored so that
namespace_module.metasploit_class now has an error raising counter-part:
namespace_module.metasploit_class! that can be used with
Msf::Modules::Loader::Base#load_error as it requires an exception, and
not just a string so the exception class, message, and backtrace can be
logged.
* Pulls common code up from several methods into #open_sc_manager
* Deprecates the name Windows::WindowsServices in favor of
Windows::Services. The platform is already clear from the namespace.
* Makes the post/test/services test module actually work
[See #1007]
[See #1012]
Msf::Modules::Loader::Archive#each_module_reference_name tried to check
the enabled types for the module_manager by accessing the
enabledment_by_type Hash, which is protected. Instead, it should use
the public type_enabled? method.
Add specs to test all of Msf::Modules::Loader::Archive while testing
each_module_reference_name. In order to properly test that modules
could be found in archives, I had to produce a fastlib archive, so there
is now a spec for FastLib.dump and FastLib.load. Some specs are marked
pending as I found a bug in FastLib, which has a work-around. The bug
is filed in PivotalTracker as
https://www.pivotaltracker.com/story/show/38730815 and the pending tests
include the URL also in their tags.
Just had a brain fart when converting the hash key names and translated
:mtype to :modification_time instead of the correct :type. Correct key
names are in
Msf::ModuleManager::Cache#module_info_by_path_from_database!.
Msf::Config.install_root already existed, but I didn't know about it
until egypt pointed it out, so remove the new Msf.root and use
Msf::Config.install_root in the specs instead.
Depending on how a socket was created, #getsockname will return either a
struct sockaddr as a String (the default ruby Socket behavior) or an
Array (the extend'd Rex::Socket::Tcp behavior). Avoid the ambiguity when
generating SSL certificates for meterpreter handlers by always picking a
random hostname.
This is by no means a proper fix for the underlying problem of
Socket#getsockname having ambiguous behavior before and after being
extended with Rex::Socket::Tcp. It does, however, solve the immediate
problem of not being able to create tunneled meterpreter sessions over
http(s) sessions.
[SeeRM #7350]
[Fixes#37630057]
Modules were always being detected as having file changes because the
parent_path directory, instead of the actual module_path, was being
passed to module_manager.file_changed?, which caused the modification
times to not match.
To ensure this change fixes the ambiguous module warnings, a full spec
for Msf::Core::Modules::Loader::Base has been written.
spec/msf has moved to spec/lib/msf to match conventional spec layout and
allow for the spec/support directory to not be confused as a lib
subdirectory being tested.
Also adds some clarifying commentation and adds todb to the list of
authors since he wrote the original module for windows upon which this
one is based.
Ensures that the absence of activerecord does not prevent msfconsole
from loading. This returns us to the previous state of affairs where it
is possible to use the framework entirely without a database.
To test:
1. rm -rf lib/gemcache/ruby/1.9.1/gems/activerecord*
2. remove any locally installed versions of activerecord
3. msfconsole
msfconsole should load up with a warning like so:
[-] ***
[-] * WARNING: No database support: LoadError cannot load such file -- active_record
[-] ***
... and should still be functional.
I missed a spot where I referenced the nested_paths as nested_pathnams
after I renamed the variable. Now, Msf::ModuleManager#add_module_paths
has rspec tests.
Rspec can be invoked with `rake` as the default task or `rake spec`
explicitly.
I changed RuntimeError to ArgumentError since that error was more
specific to having a bad argument error. I adding missing dependencies
to the Gemfile and a require to msf/core/db_manager.rb where it errored
out trying to access Msf::Config when I just did require 'msf/core' in
the spec.
[#36737359]
The merging of reload_module and the various load_module methods
resulted in the module loading from disk, but because the Hash entry in
the module manager was not deleted before on_module_load was called, the
newly reloaded module was logged as an ambiguous module name instead of
a reload. In order to report the reload errors correctly, I determined
that module_load_error_by_reference_name should really be
module_load_error_by_path. I eliminated faild in favor of this new name
since failed was just calling the attribute and the attribute's name is
clearer about the format of the data.
Tested by run rexploit and then exiting over and over with
ms08_067_netapi. When I messed up the file so it couldn't load, by
adding `inclde Exploit` (note mispelling of `include`), it reported the
error to msfconsole. When I removed the bad line and added a puts
"RELOADING <n>", where I kept incrementing n and saving the file, the
new number appeared during each rexploit.
[#36737359]
Write the module_eval backtrace to the log, but only the error's class
and name to Msf::ModuleManager#module_load_error_by_reference_name as
the contents of the Hash are printed in the console, which should never
recieve backtraces.
[#36737359]
Refactor the behavior of loading symbolic modules from cache by renaming
methods so it's clearer what they do and ensure that cached modules from
Fastlibs and directories can both be loaded, which was not previously
possible since the demand_load_module only called load_module_from_file.
[#36737359]
On Linux, some of the unqualified constants that resolve on Mac OS X,
don't resolve, so to prevent errors (and because I can't justify why the
unqualified constants should resolve on OS X), I'm qualifying all the
Msf constants that are referenced in the code I've refactored.
[#36737359]
Fix the YARD docs to document the return values and make them consistent
with the modules being called. Ensure the force flag is passed as an
option to load_modules instead of a positional argument.
[#36737359]
When starting msfconsole, 'bundler/setup' is not required, the
'msf/env/gemcache' is required instead. Unlike 'bundler/setup' the
msf/env gemcache does not do the automatic requires for gems in the
cache, so explicit requires on 'active_support/concern' is needed to get
ActiveSupport::Concern defined. (I could have done require
'active_support' to match the behavior of 'bundler/setup', but a smaller
require seemed more appropriate.
removes unnecessary parens (and yes I confirmed they are properly
paired), and adds some comments regarding this as not being an ideal
solution, but rather a stopgap
Changed lexical scope when I changed the declaration from module Msf;
class ModuleSet to class Msf::ModuleSet so that constants in Msf would
not automatically resolve.
I wasn't using any the features of ActiveSupport::Concern in
Msf::ModuleManager::Reloading, so remove the extend and just include it
as a regular module.
Came up on IRC, I'm not attached to it, but this commit adds the
rename_file method to lib/msf/core/post/file.rb and aliases it to
move_file and mv_file
[Fixes#36737359]
Refactor Msf::ModuleManager into concerns so its easier to understand and
duplicate code can be made DRY. The refactoring also ensures that when
loading from directories, Fastlibs, or reloading, the wrapper module will
always be named so that activesupport/dependencies will function.
[#36737359]
active_support/dependencies cannot resolve missing constants in Metasploit
modules because the wrapper module is anonymous. In order to make the
wrapper module non-anonymous, the module must be assigned to a constant.
Since we don't want modules colliding, the wrapper module needs a unique
name, so use the module lookup name to derive the proper nested module names
to namespace the wrapper module. All derived modules are nested under
Msf::Modules. The name derivation handles invalid characters for constant
names such as digits as the first character or non-alphanumeric character.
The invalid constant name characters are converted to their hex value and
prefixed with X, so '-' in a name become 'X2d'.
example usage:
grep https show payloads
grep -i iPhone show exploits
grep -i sp3 show targets
grep '^[\s]*generic/c' show payloads
Usage: grep [options] pattern cmd
Grep the results of a console command (similar to Linux grep command)
OPTIONS:
-c Only print a count of matching lines.
-h Help banner.
-i Ignore case.
-m <opt> Stop after arg matches.
-v Invert match.
for convenience when you don't need/want a full resource file, you just
want to run something quick
example usage:
# say you have a saved config ready to go on load
./msfconsole -s 'exploit -j'
# you can run multiple commands too
./msfconsole -s 'set ConsoleLogging true\nshow options'
Some users requested this be added to the ps
command via a -S opt instead of creating a new command.
This limits the search to only one search parameter at a time
but with the ability to pass RegEx I think that's fine
Often in HTTP modules, people are forced to to use 'data' instead
of 'vars_get' or 'vars_post', because the parameters (especially
the names) are URI-encoded, and the application actually may not
recognize the names/values. The new 'encode_params' option allows
that feature to be disabled. However, to make sure we're not
changing existing HTTP modules' behaviors, 'encode_params' is
still true by default (which is the original behavior we've always
been using).
James Lee
Royce Davis
Tod Beardsley
kernelsmith
sinn3r
HD Moore
Stephen Fewer
jvazquez-r7
Tasos Laskos
Rob Fuller
Charlie Eriksen
Meatballs1
jvennix-r7
Brandon Turner
David Maloney
Sherif Eldeeb
Samuel Huckins
Alexandre Maloteaux
Luke Imhoff
scriptjunkie
corelanc0d3r
Raphael Mudge
m m
kernelsmith
Ramon de C Valle
midnitesnake
Adam Dalton