a78d8f83fc
Add HTTP header support for Host/Cookie/Referer
...
This is to start the support for things like domain fronting.
2017-11-21 13:47:18 -06:00
7acd772c10
Pivot session stability, display and handling
2017-09-07 01:36:21 -05:00
fdc9864b61
First working packet pivot session!
2017-09-07 01:36:20 -05:00
abc80655b7
Progress in named pipe pivots, more to come
2017-09-07 01:33:54 -05:00
816e78b6f6
First pass of named pipe code for pivots
2017-09-07 01:33:53 -05:00
37b9cd07a2
Add support for the session GUID in the UI
...
The Session GUID will identify active sessions, and is the beginning of
work that will allow for tracking of sessions that have come back alive
after failing or switching transports.
2017-06-06 17:15:57 +10:00
86aad6b7c3
Fix proxy_type references to handle nil case
2017-05-22 21:47:37 +10:00
353191992f
move mettle payloads to meterpreter, add reverse_http/s stageless
2017-04-26 17:06:34 -05:00
f69b4a330e
handle Ruby 2.4 Fixnum/Bignum -> Integer deprecations
2017-01-22 10:20:03 -06:00
43942e6029
refactor pem parser to use the rex-socket gem version
...
use rex-socket's pem aprser instead of the old one we used
to have in rex::parser
MS-1715
2016-09-07 11:38:27 -05:00
0afc5be3bc
Finalise set up of stageless init
2015-11-10 20:01:23 +10:00
a28ab216d3
Adding stageless init script support
2015-11-10 19:18:47 +10:00
9ce669f878
Land #5328 : reworked x64 http/https stagers
2015-05-21 23:26:34 -05:00
bf2b113abb
Merge branch 'upstream/master' into update-x64-stagers
2015-05-18 13:28:36 +10:00
dbe4f3f1c8
Adjust single pack statement, fix up some quotes
...
* Moved over to using single quotes for strings that don't need
escaping or interpolation.
* Changed one pack spec to be "more correct". Thankfully, we were only
packing 0 so the endianness isn't a problem, however it should be
correct, hence the fix.
2015-05-18 09:29:48 +10:00
d725554a87
Fix UUID code so that it always deals with 16 bytes
...
Also re-add the payload ID to session validation now that the UUID stuff
is reliable.
2015-05-17 17:49:21 +10:00
489afd5aa1
Remove redundant check for ascii_str setting
2015-05-12 09:50:58 +10:00
42f94e70c7
Add `nil` default to exit_types, transport param order swap
...
This allows for checking against exit types to be super easy instead of
having to have extra checks in place. Also changed the order of scope_id
and uri in the transport URI generation. The net effect of this is NOP
because these things only appear separately.
2015-05-12 09:05:58 +10:00
29649ff881
Fix proxy config not making it through
2015-05-11 17:24:02 +10:00
b42f4f5cd2
Merge branch 'upstream/master' into multi-transport-support
...
Conflicts:
lib/msf/core/payload/windows/stageless_meterpreter.rb
lib/msf/core/payload/windows/x64/stageless_meterpreter.rb
lib/rex/post/meterpreter/client_core.rb
modules/payloads/stages/linux/x86/meterpreter.rb
modules/payloads/stages/windows/meterpreter.rb
modules/payloads/stages/windows/x64/meterpreter.rb
2015-05-05 07:53:54 +10:00
e45bf5cf51
Remove the URI patcher now that it's not used at all
2015-05-05 07:35:49 +10:00
e835f2b99c
Rejig transport config into module
...
Adjust a few other things along the way, including tidying of code,
removing of dead stuff.
2015-05-04 22:04:34 +10:00
9300158c9a
Initial rework of POSIX stuff to handle new configuration
2015-05-04 18:58:55 +10:00
919b96e4cf
Fix up UUID handling
2015-04-28 21:59:19 +10:00
f711e5dee7
Update migration support
...
Migration now uses the new meterpreter loader. Migration configuration
is loaded and created by meterpreter on the fly, and supports the
multiple transport stuff that's just been wired in.
2015-04-28 17:41:43 +10:00
fca4d852a1
Remove the passing on off listen socket values
2015-04-28 13:51:48 +10:00
d82bfb0692
Reorder params, fix up the transport termination
2015-04-28 13:03:40 +10:00
c41f4bd59f
Fix up http/s a little
...
Correctly check the URL against the non-widechar version. Get the SSL
verification stuff working again.
2015-04-28 09:44:48 +10:00
1ca5188c5e
Change the payload to use IPv6 formats if required
2015-04-28 07:44:21 +10:00
6da8a14f62
Initial work on x64 payloads for new config
2015-04-26 13:41:31 +10:00
6ac3ecfa7c
Refactor, add reverse_winhttps support
...
Getting closer to a normalised view of what this stuff will look like.
There URL patching is slowly being removed. Reverse HTTPS works fine,
and by default HTTP should too.
Next up, x64 for the same main ones.
2015-04-26 12:11:14 +10:00
bb77a3a0e6
First pass of refactoring to support new config block
...
This is pretty basic stuff, but at least it's reusable.
2015-04-25 21:36:28 +10:00
0a8b29dd86
Merge branch 'upstream/master' into connection-recovery
...
Conflicts:
lib/rex/post/meterpreter/ui/console/command_dispatcher/core.rb
2015-04-17 14:40:21 +10:00
4e49964c15
Add support for init_connect for stageless payloads
...
This new mode for HTTP/S stageless allows the stageless payload to be
reused without MSF believing that the session has already been
initialised.
2015-04-14 16:43:07 +10:00
809409d8c4
Lots of changes to support moving timeouts to common spots
...
Session expiry, comms timeout, retry total/wait are all now part of all
of the meterpreter payloads as these are going to be used for
maintaining access with resiliency and will aim for consistency across
the payload types.
2015-04-09 17:57:43 +10:00
8bcdddfd04
Fix yardoc comment, thanks @void-in!
2015-04-05 22:09:35 -05:00
c9696d3f6c
Merge in stageless/transport work, deconflict
2015-04-04 11:52:26 -07:00
fd043d4842
Fix up build and missing uri_checksum stuff
...
Somehow this made it into a merge when it shouldn't have. This fix moves
the URI checksum module to where it needs to be and updates all the
references where required. This will result in a class with the dynamic
transport branch, but I can fix that after.
2015-04-03 13:42:25 +10:00
1a313ad943
Fix up the proxy patching
...
Patching of the proxy details was failing, so this commit fixes that.
Also, added code that makes the proxy type check case-insensitive.
2015-04-01 11:48:22 +10:00
25dcfc796a
Better support old binaries in rev http(s)
...
* Patch 256char URL if the 512char one doesn't work.
* Return an empty list in the case where the ext enum fails.
2015-03-24 10:14:44 +10:00
9c9d333a1b
Create verify ssl mixin, adjust some formatting
2015-03-23 13:21:08 +10:00
9d20d057dd
Update Meterpreter URL length to 512
2015-03-20 13:16:43 +10:00
7ca91b2eb5
Add support for ssl to the patcher
2015-03-20 12:52:38 +10:00
a9f74383d0
Update patch to support both ascii and wchar
2015-03-20 12:52:18 +10:00
acd802c5fd
Initial work for WinHTTP comms support in Meterpreter
2015-03-20 12:51:47 +10:00
8d3cb8bde5
Fix up meterpreter patching arguments and names
2015-03-18 01:25:42 -05:00
390a704cc7
Cleanup proxyhost/proxyport arguments to match new names
2015-03-18 01:19:05 -05:00
52b3025351
Reworked to avoid extending String class on blob per hdm's rec.
2014-12-15 21:40:41 -05:00
4bd14ed5ea
Uses a hash for options as opposed to numerous methods on blob
2014-09-17 14:11:37 -04:00
3c11251432
Mitigates excessive use of lookup operator (hopefully adds clarity)
2014-09-15 17:05:54 -04:00
OJ
Brent Cook
Brent Cook
David Maloney
HD Moore
Sean Verity