Luke Imhoff
14fa1dba0b
Merge branch 'master' into feature/MSP-11605/lazy-thread-creation
...
MSP-11605
2014-11-14 11:58:16 -06:00
Luke Imhoff
d9a25005a6
Wrap Msf::Framework#threads in Metasploit::Framework::ThreadFactoryProvider
...
MSP-11605
`Rex::ThreadFactory.provider` needs to be set in
`Msf::Framework#initialize`, but setting it directly to
`Msf::Framework#threads` eliminates the laziness of
`Msf::Framework#threads`. In order keep `framework.threads` lazy,
`framework` is wrapped in a
`Metasploit::Framework::ThreadFactoryProvider`, which responds to
`spawn`, which is needed by `Rex::ThreadFactory`, by calling
`framework.threads.spawn`, which lazily initialized `framework.threads`
when the first thread needs to be spawned.
2014-11-13 14:08:26 -06:00
Luke Imhoff
b17b263cc7
Ignore debugger threads
...
MSP-11147
When using the debugger, it adds a thread that should be allowed and not
go towards the count.
2014-11-13 09:49:08 -06:00
Luke Imhoff
535f69b56d
Append to RUBYOPT for debugger compatibility
...
MSP-11147
When using Rubymine's debugger, the tests would run and say there were
no tests and no break points would be hit. It was determined that this
was due the Rubymine's debugger injecting itself into RUBYOPTS and only
working if it's first in RUBYOPT, which means that
'metasploit:framework:spec:threads:suite' must inject '-Ilib
-rmetasploit/framework/spec/threads/logger' at the end of RUBOPT instead
of the beginning.
2014-11-13 09:19:07 -06:00
Luke Imhoff
69043d51e0
Merge branch 'master' into feature/MSP-11147/thread-leak-detection
...
MSP-11147
2014-11-12 12:34:25 -06:00
HD Moore
6b4eb9a8e2
Differentiate failed binds from connects, closes #4169
...
This change adds two new Rex exceptions and changes the local comm to raise the right one depending on the circumstances. The problem with the existing model is
that failed binds and failed connections both raised the same exception. This change is backwards compatible with modules that rescue Rex::AddressInUse in additi
on to Rex::ConnectionError. There were two corner cases that rescued Rex::AddressInUse specifically:
1. The 'r'-services mixin and modules caught the old exception when handling bind errors. These have been updated to use BindFailed
2. The meterpreter client had a catch for the old exception when the socket reports a bad destination (usually a network connection dropped). This has been updat
ed to use InvalidDestination as that was the intention prior to this change.
Since AddressInUse was part of ConnectionError, modules and mixins which caught both in the same rescue have been updated to just catch ConnectionError.
2014-11-11 14:59:41 -06:00
Luke Imhoff
8416985c9d
Give Threads UUIDs for spec run so caller can be correlated
...
Have 'metasploit/framework/spec/threads/suite/logger' generate a UUID
for each Thread. This UUID is printed on the "BEGIN Thread.new caller"
line and is assigned as a thread-local variable,
'metasploit/framework/spec/threads/logger/uuid'. In `after(:suite)`,
the log can be parsed to map the caller back to each UUID and then only
the UUID of the still existing threads is used to look up the caller and
print their stacktraces. This means only leaked threads callers will be
printed.
2014-11-06 14:05:35 -06:00
Luke Imhoff
8f635a1d76
Remove empty define_task
...
MSP-11147
2014-11-06 09:11:31 -06:00
Luke Imhoff
8855e0731c
Fix multiline string indentation
...
MSP-11147
2014-11-06 09:11:12 -06:00
Luke Imhoff
8d06189a19
Tell use to run with `rake spec` to see Thread.new caller
...
MSP-11147
If the log isn't available, tell the user to rerun with `rake spec`
instead of printing nothing after the `:\n`, which looks incomplete.
2014-11-06 09:10:04 -06:00
Luke Imhoff
c1f1222783
Check that threads/suite.log exists before reading
...
MSP-11147
Even with leaked threads, there may be no log if the suite is run
without `rake spec`, such as when `rspec` is used directly to run a
subset of specs.
2014-11-06 09:07:11 -06:00
Luke Imhoff
d66c98b34d
Remove prior log/metasploit/framework/spec/threads/suite.log
...
MSP-11147
2014-11-05 15:51:43 -06:00
Luke Imhoff
d4d710cc3a
Merge branch 'feature/MSP-11130/metasploit-framework-spec-constants' into feature/MSP-11147/thread-leak-detection
...
MSP-11147
Merge to get framework instance cleanup, which should clean up a lot of
thread leaks too.
Conflicts:
Rakefile
lib/metasploit/framework/spec.rb
spec/spec_helper.rb
2014-11-05 15:47:59 -06:00
Luke Imhoff
097aa330e1
Log caller for each Thread.new for `rake spec`
...
MSP-11147
2014-11-05 15:34:35 -06:00
Luke Imhoff
96990fdc02
Fail before suite if more than 1 thread exists
...
MSP-11147
Detect thread leaks in a `before(:suite)` configured by
`Metasploit::Framework::Spec::Threads::Suite.configure!` and fail if any
leaks are found.
2014-11-05 14:38:43 -06:00
Luke Imhoff
3093ba8394
Explicitly require 'metasploit/credential' and 'metasploit_data_models'
...
By putting the db group into the metasploit-framework-db.gemspec,
bundler no longer automatically required 'metasploit/credential' and
'metasploit_data_models' because gems, such as metasploit-framework-db,
are expected to explictly require their dependencies.
2014-11-05 09:25:50 -06:00
Luke Imhoff
9f573e2d8d
Revert "Add .log extension to metasploit/framework/spec/constants/suite log"
...
MSP-11130
This reverts commit 4f986c4a48
.
Extension wasn't there because it was a directory name and a log file
name.
2014-11-04 14:03:54 -06:00
Luke Imhoff
dee02fc85b
Automatically clear previous log/metasploit/framework/spec/constants/each.log
...
MSP-11130
Have a task, 'metasploit:framework:spec:constants:each:clean' run before
`rake spec` that removes the previous
`log/metasploit/framework/spec/constants/each.log` so that the user doesn't
have to manually remove the load when removing
`Metasploit::Framework::Spec::Constants::Each.configure!` from
`spec/spec_helper.rb`.
2014-11-04 13:58:13 -06:00
Luke Imhoff
313d86982c
Log Spec::Constants::Each error instead of flag.
...
MSP-11130
Instead of writing `1` to the file and then printing a verbose message
in the spec task action, log the verbose message and just print the log
in the spec task action, so other tools can just look at the log when
not using `rake spec`.
NOTE: Failing specs due to unnecessary
`Metasploit::Framework::Spec::Constants::Each.configure!`
2014-11-04 13:36:52 -06:00
Luke Imhoff
1d09fa677e
log/remove-cleaner -> log/metasploit/framework/spec/constants/each.log
...
MSP-11130
Rename log file to match naming scheme for
Metasploit::Framework::Spec::Constants::Suite.
2014-11-04 13:21:47 -06:00
Luke Imhoff
4f986c4a48
Add .log extension to metasploit/framework/spec/constants/suite log
...
MSP-11130
2014-11-04 13:20:10 -06:00
Luke Imhoff
7cb0954a6e
Add manual removal of `log/remove-cleaner` to Each removal
...
MSP-11130
When removing `Metasploit::Framework::Spec::Constants::Each.configure`
from spec/spec_helper.rb,
`Metasploit::Framework::Spec::Constants::Each.define_task` will see the
`log/remove-cleaner` from the last run unless it is manually removed.
2014-11-04 10:10:28 -06:00
Luke Imhoff
b0f1b2a1f7
Merge branch 'master' into feature/MSP-11130/metasploit-framework-spec-constants
...
MSP-11130
Conflicts:
Rakefile
2014-11-04 10:10:12 -06:00
Luke Imhoff
325c01e45d
Log constants leaked before and after suite
...
MSP-11130
Some constants can be leaked before suite if module are loaded during
spec loading, such as if a framework instance in made in the context
body of a spec instead of in a before callback.
2014-10-30 14:04:07 -05:00
Luke Imhoff
ae0a98785f
Print when Metasploit::Framework::Spec::Constants::Each before(:each) cleans
...
MSP-11130
Print to stderr the full description of the example when
`Metasploit::Framework::Spec::Constants.configure!`'s `before(:each)`
cleans constants as it may clean constants that are leaked from the
class level at parse time.
2014-10-30 12:34:55 -05:00
Luke Imhoff
c8e4745d6d
Fail `rake spec` if leak tracking unnecessary
...
MSP-11130
Fail `rake spec` if
`Metasploit::Framework::Spec::Constants::Each.configure!`'s
`before(:each)` does not clean all leaked constants and if should be
removed so that it does not interefore with future specs.
2014-10-30 09:37:17 -05:00
Luke Imhoff
c2bd75b587
Clean up leaked constants
...
MSP-11130
2014-10-29 15:50:47 -05:00
Luke Imhoff
892aeaf727
Metasploit::Framework::Spec::Constants cleaner
...
MSP-11130
Shared context will calls `Metasploit::Framework::Spec::Constants.clean
after each example.
2014-10-29 11:31:17 -05:00
Luke Imhoff
0d4b22ce7a
Detect constant leaks in individual examples
...
MSP-11130
`Metasploit::Framework::Spec::Constants::Each.configure!` will set up an
`after(:each)` callback that will fail the example if there are leaked
constants. Leaked constants are cleaned up to prevent misattribution.
2014-10-28 15:50:24 -05:00
Luke Imhoff
f9b1f2a424
Extract Metasploit::Framework::Spec::Constants::Suite
...
MSP-11130
`Metasploit::Framework::Spec::Constants::Suite` extracts out
`LOG_PATHNAME`, `configure!`, and `define_task` as those piece are
specific to handling constant leaks for the entire suite. This is in
preparation for `Metasploit::Framework::Spec::Constants::Each`.
2014-10-28 15:07:32 -05:00
Luke Imhoff
3ec9cf54c9
Filter non-loaded-module constants from leaked constants
...
MSP-11130
Constants from library Modules or Classes should not be reported as
leaked since they have been required and should be persistent between
spec runs.
2014-10-28 14:05:27 -05:00
Luke Imhoff
1a1f3335b8
Extract Metasploit::Framework::Spec::Constants.full_name
...
MSP-11130
Extract method to convert child constant names to module full names so
it can be reused 'Metasploit::Framework::Spec::Constants tracker' shared
context.
2014-10-28 13:53:48 -05:00
Luke Imhoff
a0a9c2140b
Log leaked constants and fail rake spec on leak
...
MSP-11130
Instead of printing the leaked constants to stderr, log them to
`log/leaked-constants.log`. In task action for spec, read
`log/leaked-constants.log`. If it exists, print each leaked constants
(and it appropriate it's module full name) and then exit with 1. If the
file does not exist, do nothing.
2014-10-28 11:21:35 -05:00
Joe Vennix
c6bbc5bccf
Merge branch 'landing-4055' into upstream-master
2014-10-28 11:18:20 -05:00
sinn3r
e31c9f579d
Land #3987 - Buffalo Linkstation NAS Login Scanner
2014-10-28 01:45:57 -05:00
Luke Imhoff
c84febea5f
tools/missing-payload-tests.rb
...
MSP-11145
**NOTE: Failing specs**
Add a tool for reading `log/untested-payload.log` and
`framework.payloads` to determine `context`s to add
`spec/modules/payloads_spec.rb` to test the untested payloads.
2014-10-27 13:03:31 -05:00
Jon Hart
b8c9ef96ca
Land #4003 , @nstarke's Login Scanner for WD MyBook Live NAS
2014-10-27 09:57:43 -07:00
Jon Hart
765b5e686c
Use configured method and URI rather than duplicated values
2014-10-27 09:56:39 -07:00
Luke Imhoff
605f48e58d
Detect leaked constants under Msf::Modules
...
MSP-11130
Detect constants leaked under Msf::Modules after the suite completes.
2014-10-27 11:13:43 -05:00
nstarke
44f7db4798
Refactoring Success Case
...
I have refactored the code so that it will work with
non-root accounts.
2014-10-25 13:31:36 +00:00
Luke Imhoff
48d6880f1d
Add docs for untested payload testing
...
MSP-11145
Add docs to rake task, shared examples, and share contexts for how to
use all 3 together.
2014-10-23 11:17:05 -05:00
Luke Imhoff
f827a1c761
Extract untested-payloads.log checker spec task action
...
MSP-11145
Extract the spec task action which errored out if
`log/untested-payloads.log` exists to
`Metasploit::Framework::Spec::UntestedPayloads.define_task`.
2014-10-23 10:24:33 -05:00
Jon Hart
83df08aaa7
Properly encode body and catch invalid configs
2014-10-22 22:43:06 -07:00
James Lee
a5a84886ee
Make sure vnc closes the socket
2014-10-22 15:53:05 -05:00
Jon Hart
ce8a9941ea
Cleanup. Sanity check in setup. vprint
2014-10-22 10:36:24 -07:00
James Lee
46acf08e2d
Merge remote-tracking branch 'upstream/master' into bug/msp-11497/loginscanner-tcp-evasions
2014-10-22 09:09:34 -05:00
nstarke
ee3dd3a2ac
More Fixes for WD MyBook Live Scanner
...
Fixes include removing deregistered options
from credentials collection object and adding proof
when there is no response
2014-10-22 03:06:21 +00:00
James Lee
e1a7e902d6
Re-enable tcp evasions for more LoginScanners
...
Untested since I don't have targets for these.
2014-10-21 18:58:28 -05:00
sinn3r
79d393c5aa
Resolve merge conflicts
...
Conflicts:
lib/msf/core/exploit/smb.rb
lib/msf/core/exploit/tcp.rb
modules/auxiliary/scanner/http/axis_login.rb
2014-10-21 13:06:35 -05:00
James Lee
83b1d270cd
Fix ftp and mssql
2014-10-21 11:09:39 -05:00
James Lee
8b2dcac730
Fix telnet
2014-10-21 11:08:41 -05:00
James Lee
2fcb1004fb
Move tcp options to Tcp::Client out of RexSocket
2014-10-21 09:59:26 -05:00
James Lee
e76ee294a1
Restore tcp evasions to telnet
2014-10-21 09:44:55 -05:00
James Lee
cb9a77c06b
Fix NoMethodError when unable to connect
...
Derp.
2014-10-21 08:58:45 -05:00
James Lee
6f3b26f5e9
Remove tcp evasions from Http
...
Can't use 'em anyway
2014-10-21 08:27:29 -05:00
nstarke
82b74d5f3c
Fixes to MyBook Live Module
...
This commit contains three fixes as requested on PR
#4003 . Those include:
+ Removing extraneous puts statement
+ Checking for valid response
+ SSL support.
2014-10-21 00:50:40 +00:00
nstarke
70b13819d9
Adding Login Scanner for MyBook Live
...
This is a LoginScanner auxiliary module for Western
Digital MyBook Live NAS devices as well as the spec
for testing.
2014-10-21 00:50:40 +00:00
James Lee
3051b6c5ba
Clean up exceptions
...
Of particular note is mysql, who was rescuing Rex::ConnectionTimeout
*after* Rex::ConnectionError, which never would have fired anyway.
2014-10-20 10:27:02 -05:00
James Lee
b7d69bec83
Restore proxies to ssh scanners
2014-10-20 10:19:06 -05:00
Tod Beardsley
a431bff13f
@wvu-r7 is a skilled negotiator. s/stdout/stderr/
2014-10-17 13:13:44 -05:00
Tod Beardsley
5978bd5e62
Control the startup msg with -q, too
2014-10-17 12:41:58 -05:00
Tod Beardsley
a45b21b6bf
-q will quiet the animation, too
2014-10-17 12:32:28 -05:00
James Lee
41a57b7ba5
Re-enable proxies for HTTP-based login scanners
2014-10-15 17:00:44 -05:00
Tod Beardsley
e010d70913
No need for that bool option
2014-10-14 14:59:57 -05:00
Tod Beardsley
bf0a5d038e
Add an animation to comfort the user
...
Sometimes msfconsole takes a little while to start.
This adds a fairly common ASCII spinner to the startup sequence.
I haven't spec'ed it, and the code organization isn't great, so consider
this PR more of a cry for help than something immediately landable.
That said, it works for me.
2014-10-14 14:54:45 -05:00
nstarke
f8d6af6d4e
Rescuing from JSON Parse
...
Previous code was not using any sort of exception handling
for parsing the response body. I have added a rescue block
for JSON errors to remedy this problem.
2014-10-10 12:41:11 +00:00
nstarke
472985a8a8
Adding Buffalo Linkstation NAS Login Scanner
...
I have added a login scanner for the Buffalo Linkstation
NAS. I have been testing against version 1.68 of the
firmware. Also included are some specs for this module.
2014-10-10 03:16:48 +00:00
nstarke
eed0958de5
Fixing Comment
...
Comment was incorrect and needed to be fixed.
2014-10-07 11:28:40 -05:00
nstarke
b8c2643d56
Converting Module to LoginScanner w/ Specs
...
The previous commits for this Jenkins CI module relied on an
obsolete pattern. Consequently, it was necessary to write
this module as a LoginScanner and incorporate the appropriate
specs so that the tests will run properly.
2014-10-06 21:14:10 -05:00
Matt Buck
0bb4eac259
Rename the method for optional requires
...
MSP-11412
2014-10-03 14:06:13 -05:00
Matt Buck
88cbf22ef0
Optionally require mdm, as well
...
MSP-11412
2014-10-03 13:49:39 -05:00
Matt Buck
dabec92e61
Ensure require of metasploit/credential/engine is optional
2014-10-02 14:46:56 -05:00
Matt Buck
7ed1977d0b
Specific require all metasploit gem dependencies' engines
...
MSP-11412
2014-10-02 14:20:10 -05:00
sinn3r
7163b8c55a
Fixes #3915 - NoMethodError private method `rhost'
...
There's no self.rhost, but rhost is defined
2014-09-30 11:34:16 -05:00
David Maloney
5ff4a55cd2
smb connection error not setting result properly
...
if the initial connection from the SMB LoginScanner fails
it wouldn't set the target information on the result. this could cause
smb_login to throw a stack trace when it calls invalidate_login
2014-09-16 15:24:14 -05:00
David Maloney
e5aa5c4014
missing postgres rescues
2014-09-16 15:04:07 -05:00
sinn3r
169d04020d
Land #3571 - Add Wordpress XML-RPC Login Scanner (with LoginScanner)
2014-09-16 14:51:24 -05:00
David Maloney
aeed66b694
missing mysql rescue
2014-09-16 13:41:03 -05:00
David Maloney
d708de07a3
return the lgoinscanner class name in an invalid exception
...
when a loginScanner throws an Invalid exception , the message
will now include the classname of the Scanner that threw it.
2014-09-16 13:24:08 -05:00
David Maloney
6decd3cbd2
fix exceptions thrown in telnet loginscanner too
2014-09-16 10:09:59 -05:00
David Maloney
bf8f7221c7
rescue exceptions in check_setup
2014-09-15 13:52:17 -05:00
jvazquez-r7
7d4c4c3658
Land #3699 , @dmaloney-r7's ipboard login refactor
2014-09-15 08:29:42 -05:00
jvazquez-r7
917a7ffa1e
Add specs for valid IPBoard application
2014-09-12 16:08:03 -05:00
Cucumber
b80519dc16
Lands #3779 , specs
...
MSP-11343
Merge specs that I missed during last merge.
2014-09-12 14:49:26 -05:00
jvazquez-r7
0d054d8354
Update with master changes
2014-09-12 09:52:32 -05:00
jvazquez-r7
b8d31891f8
Clean YARD documentation
2014-09-12 09:32:32 -05:00
Joe Vennix
55519d8867
Land #3781 , my addition of Metasploit::Concern to msf.
2014-09-11 16:57:24 -05:00
Luke Imhoff
706655f755
Land #3779 , Glassfish LoginScanner exception
...
MSP-11343
2014-09-11 15:57:47 -05:00
Joe Vennix
8654b63c58
Make sure Metasploit::Concern is accessible everywhere.
2014-09-11 14:46:35 -05:00
David Maloney
0663355237
catch connectionreset in ftp login scanner
...
add exception rescue for Errno::ECONNRESET
2014-09-11 14:39:36 -05:00
James Lee
a8e3ff0c0f
Add specs to verify server header matching
2014-09-11 11:42:38 -05:00
James Lee
9151c2c79d
Add docstrings and avoid multiple returns
2014-09-11 10:50:42 -05:00
James Lee
20e48a233a
Explicitly set @version to nil if we can't detect
2014-09-11 10:30:52 -05:00
Cenk Kalpakoğlu
11004ab7c6
typo fix
2014-09-11 16:27:35 +03:00
James Lee
8aa06b8605
Better api for check_setup
2014-09-10 23:43:54 -05:00
James Lee
c1658e5d51
Add a check_setup method
2014-09-10 20:09:46 -05:00
James Lee
84e4db9035
Don't raise in the middle
...
MSP-11343
This means we don't bomb out with an unhandled exception, instead
continuing attempting logins against the host even though it will never
succeed. Next up: verify state before running scan!()
2014-09-10 20:09:33 -05:00
David Maloney
2ac15f2088
some fixes based on Christruncer's feedback
...
fixed some stuff i borked, back to you chris
2014-09-08 15:27:01 -05:00
David Maloney
cd3cdc5384
Merge branch 'master' into feature/ipboard-login-refactor
2014-09-08 14:48:37 -05:00
David Maloney
b84142715f
rescue mysql host blocked
...
rbmysql can throw an exception if the
server blocked this host due to too many connection errors
2014-09-08 12:45:10 -05:00
jvazquez-r7
10bb77af9f
Land #3716 , @wchen-r7's Glassfish LoginScanner update
2014-09-07 21:54:34 -05:00
jvazquez-r7
768b50974f
Redo try_glassfish_3 specs
2014-09-07 21:04:43 -05:00
jvazquez-r7
07238ef7b3
Redo try_glassfish_2 specs
2014-09-07 20:47:54 -05:00
sinn3r
6df7658267
Very small change to the doc
2014-09-06 01:54:52 -05:00
jvazquez-r7
78cf75c4d5
Clean YARD documentation
2014-09-06 00:24:39 -05:00
sinn3r
0dcf481d76
This one is good to go
2014-09-04 14:13:33 -05:00
David Maloney
28427ccee3
add VHOST and useragent support to loginscanner
2014-09-04 10:59:07 -05:00
sinn3r
e1694ec3e5
LoginScanner update for hp_sys_mgmt_login
...
Work in progress
2014-09-03 16:23:57 -05:00
sinn3r
61e58dc6d3
Yard doc
2014-09-02 20:48:07 -05:00
sinn3r
954475c0bf
Add rspec and update about secure admin
2014-09-02 20:35:25 -05:00
David Maloney
928aeffcba
add wordpress_rpc loginscanner and specs
2014-08-29 13:06:12 -05:00
Samuel Huckins
fa77caa819
Merge branch 'bug/MSP-11153/database-config-overrides'
...
MSP-11153 #land
2014-08-28 17:12:37 -05:00
Luke Imhoff
20177c7c23
Restore backup database.yml when retesting after interrupt
...
MSP-11153
Restore the config/database.yml backed up to
config/database.yml.cucumber.bak in the db:config:restore task, which is
made a dependency of the environment rake task so that
config/database.yml is restored before Rails tries to use it in the
environment task. This specifically, allows for rake cucumber to be
interrupted when the config/database.yml has been moved to
config/database.yml.cucumber.bak and a subsequence rake cucumber to
succeed and restore config/database.yml, but any task that depends on
environment will restore the config/database.yml.
2014-08-28 15:20:53 -05:00
sinn3r
f097ef96e0
Use &&
2014-08-28 12:13:03 -05:00
sinn3r
d0d9949d91
Do SSL options correctly
2014-08-28 12:04:14 -05:00
Luke Imhoff
275fa5cb50
Remove unnecessary return
...
MSP-11153
Leftover from earlier design.
2014-08-27 16:58:45 -05:00
Luke Imhoff
83b6f268b4
Remove unnecessary realpath
...
MSP-11153
Causes errors on machines that don't have ~/.msf4 like travis-ci.
2014-08-27 16:58:05 -05:00
sinn3r
df215a380d
Do not send 2 content-length headers
2014-08-27 16:05:08 -05:00
sinn3r
a32ffc4c26
Add the final portion for Glassfish login module
2014-08-27 15:09:11 -05:00
Luke Imhoff
951ce15b44
Move database.yml selection to Metasploit::Framework::Database
...
MSP-11153
Test the following paths in order and only return them if the path
exists:
1. MSF_DATABASE_CONFIG environment variable
2. ~/.msf4/database.yml
3. <project>/config/database.yml
2014-08-27 12:01:43 -05:00
sinn3r
5d8cbe0544
Early version of Glassfish using LoginScanner
2014-08-27 01:23:02 -05:00
Tom Sellers
4a1b037af0
Remaining files..
2014-08-26 18:15:58 -05:00
David Maloney
c42517a14a
missing exception rescue
...
needed to also rescue Errno::ETIMEDOUT
2014-08-26 13:58:34 -05:00
David Maloney
32b1a5ea23
add ipboard loginscanner
...
add loginscanner class for IPBoard with specs
this should replicate the functionality originally written
by Chris Truncer, but move it into a testable, reusable class
2014-08-25 13:58:30 -05:00
Joe Vennix
95fbb8f1b7
Land PR #3672 , dmaloney-r7's login scanner credential rework.
2014-08-22 11:15:32 -05:00
Brandon Turner
05f0d09828
Merge branch staging/electro-release into master
...
On August 15, shuckins-r7 merged the Metasploit 4.10.0 branch
(staging/electro-release) into master. Rather than merging with
history, he squashed all history into two commits (see
149c3ecc63
and
82760bf5b3
).
We want to preserve history (for things like git blame, git log, etc.).
So on August 22, we reverted the commits above (see
19ba7772f3
).
This merge commit merges the staging/electro-release branch
(62b81d6814
) into master
(48f0743d1b
). It ensures that any changes
committed to master since the original squashed merge are retained.
As a side effect, you may see this merge commit in history/blame for the
time period between August 15 and August 22.
2014-08-22 10:50:38 -05:00
Brandon Turner
19ba7772f3
Revert "Various merge resolutions from master <- staging"
...
This reverts commit 149c3ecc63
.
Conflicts:
lib/metasploit/framework/command/base.rb
lib/metasploit/framework/common_engine.rb
lib/metasploit/framework/require.rb
lib/msf/core/modules/namespace.rb
modules/auxiliary/analyze/jtr_postgres_fast.rb
modules/auxiliary/scanner/smb/smb_login.rb
msfconsole
2014-08-22 10:17:44 -05:00
James Lee
c3e8bc8fa0
Fix a crash when we can't connect to PG, again
2014-08-20 11:02:46 -05:00
James Lee
fa27def41f
Revert "Fix a crash when we can't connect to PG"
...
This reverts commit b6deb6a342
.
2014-08-20 11:01:29 -05:00
James Lee
b6deb6a342
Fix a crash when we can't connect to PG
...
MSP-11061
No Postgres, no cry
2014-08-19 15:30:24 -05:00
David Maloney
473b92a060
Merge branch 'master' into feature/MSP-10992/scanner-dry
...
Conflicts:
Gemfile.lock
lib/metasploit/framework/command/console.rb
lib/metasploit/framework/common_engine.rb
lib/metasploit/framework/credential.rb
lib/metasploit/framework/credential_collection.rb
lib/metasploit/framework/login_scanner/afp.rb
lib/metasploit/framework/login_scanner/axis2.rb
lib/metasploit/framework/login_scanner/db2.rb
lib/metasploit/framework/login_scanner/ftp.rb
lib/metasploit/framework/login_scanner/http.rb
lib/metasploit/framework/login_scanner/mssql.rb
lib/metasploit/framework/login_scanner/mysql.rb
lib/metasploit/framework/login_scanner/pop3.rb
lib/metasploit/framework/login_scanner/postgres.rb
lib/metasploit/framework/login_scanner/result.rb
lib/metasploit/framework/login_scanner/smb.rb
lib/metasploit/framework/login_scanner/snmp.rb
lib/metasploit/framework/login_scanner/ssh.rb
lib/metasploit/framework/login_scanner/telnet.rb
lib/metasploit/framework/login_scanner/vnc.rb
lib/metasploit/framework/parsed_options/console.rb
lib/metasploit/framework/require.rb
lib/metasploit/framework/version.rb
lib/msf/core/modules/namespace.rb
modules/auxiliary/analyze/jtr_postgres_fast.rb
modules/auxiliary/scanner/afp/afp_login.rb
modules/auxiliary/scanner/db2/db2_auth.rb
modules/auxiliary/scanner/ftp/ftp_login.rb
modules/auxiliary/scanner/http/axis_login.rb
modules/auxiliary/scanner/http/http_login.rb
modules/auxiliary/scanner/http/tomcat_mgr_login.rb
modules/auxiliary/scanner/mssql/mssql_login.rb
modules/auxiliary/scanner/mysql/mysql_login.rb
modules/auxiliary/scanner/pop3/pop3_login.rb
modules/auxiliary/scanner/postgres/postgres_login.rb
modules/auxiliary/scanner/snmp/snmp_login.rb
modules/auxiliary/scanner/ssh/ssh_login.rb
modules/auxiliary/scanner/ssh/ssh_login_pubkey.rb
modules/auxiliary/scanner/telnet/telnet_login.rb
modules/auxiliary/scanner/vnc/vnc_login.rb
modules/auxiliary/scanner/winrm/winrm_login.rb
spec/lib/metasploit/framework/credential_spec.rb
spec/lib/msf/core/framework_spec.rb
2014-08-19 10:30:16 -05:00
James Lee
b9e449f5e2
Fix crash when database.yml doesn't exist
2014-08-18 12:40:57 -05:00
Samuel Huckins
82760bf5b3
Deprecation warnings hidden for non-listeners
2014-08-15 12:33:44 -05:00
Samuel Huckins
149c3ecc63
Various merge resolutions from master <- staging
...
* --ask option ported to new location
* --version option now works
* MSF version updated
* All specs passing
2014-08-15 11:33:31 -05:00
David Maloney
84374fe92c
Merge branch 'staging/electro-release' into bug/MSP-11050/rails_root
2014-08-12 13:54:38 -05:00
David Maloney
12f1234296
always set our rails root to our root
...
this works fine when calling any framework binaries
from their path as CWD. if you call tehm from another path
you will get an incorrect root which can cause certain things to load
incorrectly
Signed-off-by: David Maloney <DMaloney@rapid7.com>
2014-08-12 13:53:28 -05:00
David Maloney
fcfce9efec
Merge branch 'staging/electro-release' into feature/MSP-10992/scanner-dry
2014-08-12 11:22:51 -05:00
Luke Imhoff
e051272a20
Fix typo
...
MSP-11046
`ActiveSupport::OrderedOptions` automatically create an attribute for
any missing keys, so when `options.console.resource` was used it would
return `nil` instead of the erroring. The correct option name was
`options.console.resources` (note the pluralization).
2014-08-12 10:49:35 -05:00
Luke Imhoff
9096a8a1f5
Remove Msf::Framework::VersionAPI
...
MSP-10998
It's compacting of the version parts into a single float doesn't work
with APIMinor over 10, so replace with Gem::Version, which compares
parts correctly.
2014-08-01 21:43:14 -05:00
Luke Imhoff
22db5aad8a
Remove Msf::Framework::VersionCore
...
MSP-10998
It can't handle 4.10.0 because it tries to compact the multiple part
version into one float using (1 / 10.0).
2014-08-01 21:31:48 -05:00
darkbushido
ceaffce727
Merge branch 'pr/3593' into staging/electro-release
2014-08-01 16:01:10 -05:00
David Maloney
ab7111120b
and all the rest
...
finally!
2014-08-01 14:54:18 -05:00
David Maloney
4821851ae4
telnet and ssh next
2014-08-01 14:47:08 -05:00
David Maloney
12902b0a6d
the refactor continues!
2014-08-01 14:41:03 -05:00
David Maloney
b74813b9a1
mysql and pop3 now
2014-08-01 14:30:33 -05:00
David Maloney
2e7738c788
http and mssql now
2014-08-01 14:22:58 -05:00
dmaloney-r7
e6a0e079b6
Merge pull request #3596 from darkbushido/bug/MSP-10937/adding-parent-to-cores-to-credential
...
.to_credential now assigns a parent
2014-08-01 13:13:48 -05:00
David Maloney
33f73a8af7
refactor db2
2014-08-01 13:00:27 -05:00
David Maloney
439b893fea
refactor axislogin
2014-08-01 12:30:16 -05:00
David Maloney
0fffb179fa
refactor afp_login
2014-08-01 12:10:52 -05:00
David Maloney
db345fcb58
make credential_collection always set private_type
2014-08-01 11:57:35 -05:00
David Maloney
a380646667
start refactoring ftp loginscanner
2014-08-01 11:47:13 -05:00
David Maloney
320f032dfe
add to_h to result
2014-08-01 11:46:43 -05:00
David Maloney
dbde046f44
use to_h instead of to_hash
...
apparently ruby 2 adds this as a standard method so
we should stay compliant
2014-08-01 09:45:51 -05:00
David Maloney
0e65792f43
Merge branch 'staging/electro-release' into feature/loginscanner-report-dry
2014-08-01 09:41:30 -05:00
Brandon Turner
0ad2a7c89b
Bump version to 4.10.0
2014-07-31 23:43:46 -05:00
David Maloney
374c6532fa
add to_hash to Credential
...
begining of the chain to DRYing up
credential reporting in the loginscanner
2014-07-31 18:10:48 -05:00
darkbushido
ad6eed01a2
.to_credential now assigns a parent
...
Metasploit::Credential::Core#to_credential will set the parent to the original core objext
Metasploit::Framework::Credential#to_credential also sets the parent to itself.
2014-07-31 14:52:27 -05:00
Luke Imhoff
7cc5af589f
Only require config/application.rb when Rails.application not set
...
MSP-10964
Allows other Rails::Applications to use the commands.
2014-07-31 13:32:22 -05:00
Luke Imhoff
f9ab7f7a88
Only error out if Rails.env differs from options.environment
...
MSP-10964
2014-07-31 13:28:21 -05:00
Luke Imhoff
aa2e26f8f2
Allow RAILS_ENV to override default environment of 'production'
...
MSP-10964
2014-07-31 13:24:23 -05:00
James Lee
6a72572237
Wrap comments at 80
2014-07-31 09:41:08 -05:00
James Lee
77d99b7374
Land #3586 , fix msfconsole when running without db
...
Conflicts:
Gemfile.lock
metasploit-framework.gemspec
2014-07-30 17:24:21 -05:00
Trevor Rosen
ea72a7e5c3
Merge pull request #3583 from jlee-r7/feature/MSP-9932/creds-add-subcommands
...
Add `creds` subcommands
MSP-9932 #land
2014-07-30 12:01:36 -05:00
Luke Imhoff
ceb8a0f5c2
Extract option require pattern to helper Module
...
MSP-10905
`Metasplot::Framework::Require.optionally` can be used to optionally
require a library and then issue a warning if the require fails or run a
block when it succeeds.
2014-07-30 10:07:53 -05:00
Luke Imhoff
1a6d4843c7
Merge branch 'staging/electro-release' into bug/MSP-10905/msfconsole-database
...
MSP-10905
2014-07-29 15:52:11 -05:00
Luke Imhoff
ba4891bca0
Restore Rails.groups arguments
...
MSP-10905
They don't cause a problem.
2014-07-29 15:50:52 -05:00
Luke Imhoff
38da44c26b
Fix arity difference between rails and msfconsole options
...
MSP-10905
2014-07-29 14:32:42 -05:00
Luke Imhoff
04541ac724
Parse msfconsole options before initializing Rails
...
MSP-10905
2014-07-29 14:07:14 -05:00
Luke Imhoff
24a5a155f4
Require gems
...
MSP-10905
2014-07-29 14:02:56 -05:00
David Maloney
78a3263cfe
have Credentials remember their aprents
...
a Credential object can be created from several
other types of objects. Keep a reference to the originating
'parent' so we can find our way back
2014-07-29 11:20:52 -05:00
James Lee
ef7f5fe967
Make metasploit-model a direct dep
...
Needed for all the scanners that use Metasploit::Model::Realm::Key
constants.
2014-07-29 10:30:46 -05:00
darkbushido
064d624322
changing Credential == operator
...
it should no longer raise no method errors when comparing a credential to
an object that doesnt respond to public, private, or realm
2014-07-23 16:17:09 -05:00
Samuel Huckins
6c1a3f4992
Merge pull request #3555 from jlee-r7/bug/MSP-10817/jtr-typo
...
Now able to complete without error.
MSP-10817 #land
2014-07-23 15:55:42 -05:00
Samuel Huckins
ffd7d28bc6
Merge pull request #3559 from dmaloney-r7/feature/MSP-10230/snmp_login
...
MSP-10230 #land
2014-07-23 13:59:37 -05:00
David Maloney
b7d15d0b08
simple fix to mysql loginscanner
...
typo caused connection_timeout default to not get set
2014-07-23 12:07:57 -05:00
David Maloney
e54f5e8ee7
working snmp_login module
2014-07-22 12:44:21 -05:00
David Maloney
c553fcac73
start refacotirng snmp_login
2014-07-22 11:46:22 -05:00
David Maloney
0eb4fc0ed1
community string collection
...
add community string collection to handle snmp loginscanner
credentials
2014-07-22 11:44:31 -05:00
James Lee
addecb6311
Fix running shipped bins by using a config file
...
This should get everything working again.
MSP-10817
2014-07-21 18:26:50 -05:00
James Lee
a2a75ffb03
Fix typo and full path issue
...
Previously, the JtR library was prepending the path to data/john/ for
shipped bins; without it, modules weren't finding the executables.
2014-07-21 17:58:27 -05:00
Joe Vennix
9db951cadc
Add sane defaults for HTTP method and path.
2014-07-21 14:57:28 -05:00
cdoughty-r7
1ad04eb2d9
Merge pull request #111 from rapid7/bug/MSP-10714-gem-version
...
Fix gem version to support rubygems < 2.1
2014-07-16 13:23:33 -05:00
Brandon Turner
e637237574
Use the Rubygems 2.2 version convention
...
Substitute version dashes with ".pre.".
MSP-10714
2014-07-16 11:13:14 -05:00
Brandon Turner
044fdb8c55
Fix gem version to support rubygems < 2.1
...
MSP-10714
2014-07-15 19:02:39 -05:00
David Maloney
ea57ad0126
fix connection error on base
...
missed a reference to connection_error on the
loginscanner base. this would prevent us from
bailing out early if we have too many connection errors
2014-07-15 16:21:13 -05:00
David Maloney
34635ab968
module login status cleanup
...
cleanup several bruteforce module to
use the loginstatus constants for result status
2014-07-15 14:55:41 -05:00
David Maloney
9857bac6b1
add NO_AUTH_REQUIRED
2014-07-15 14:38:41 -05:00
David Maloney
939e585658
refactor all loginscanners
...
loginscanners now use LoginStatus constants
for the result statuses
2014-07-15 13:17:56 -05:00
David Maloney
846679bef9
change Result status
...
result bojects now use Login::status constants
for their status
2014-07-15 11:39:38 -05:00
dmaloney-r7
f3ec386240
Merge pull request #106 from rapid7/feature/MSP-10686/stop-after-user-success
...
Feature/msp 10686/stop after user success
2014-07-14 14:56:23 -05:00
dmaloney-r7
7184d2ed5e
Merge pull request #107 from rapid7/feature/MSP-9704/pop3-module-refactor
...
Refactor pop3_login
2014-07-14 13:27:11 -05:00
James Lee
e68dcdbb06
Refactor pop3_login
...
Also adjusts timeout in the scanner class to account for Dovecot's
default "Authentication Penalty" delay.
See http://wiki2.dovecot.org/Authentication/Penalty
2014-07-11 17:26:49 -05:00
Trevor Rosen
cc93dbbe29
Merge pull request #102 from rapid7/feature/MSP-9707/smb-bruteforce-refactor
...
Feature/msp 9707/smb bruteforce refactor
MSP-9707 #land
2014-07-11 11:33:12 -05:00
James Lee
4b16985eb8
Stop trying more creds for a user after success
...
This is more like the behavior of the old AuthBrute mixin, where a
scanner module was expected to return :next_user in the block given to
each_user_pass when it successfully authenticated.
The advantage is a reduced number of attempts that are very unlikely to
be successful since we already know the password. However, note that
since we don't compare realms, this will cause a false negative in the
rare case where the same username exists with different realms on the
same service.
MSP-10686
2014-07-10 17:48:58 -05:00
James Lee
097d5d68ce
Display 'realm\user' for AD instead of 'user@realm'
2014-07-10 14:31:42 -05:00
James Lee
e4039c2382
Merge branch 'staging/electro-release' into feature/MSP-10679/refactor-invalidate-login
2014-07-10 14:00:28 -05:00
David Maloney
818bd1946d
final tweak for the http case
...
the only scenario in our final else that
would have a realm in the credential is the
http case in which case we want the realm to be there
still. otherwise the credential in this case has no
realm anyways so there is no need to strip one off
2014-07-10 12:39:01 -05:00
David Maloney
7dc58d060e
make only one each method
...
made the one true enumerator of credentials
for the login_scanner.
also covered the wierd http case where it can have a realm key
but no default realm.
2014-07-10 12:35:09 -05:00
David Maloney
a319d5270e
set default connection tiemouts
...
loginscanners should have a default connection timeout
2014-07-10 11:35:10 -05:00
David Maloney
1a0200f711
one more strip
2014-07-09 17:50:28 -05:00
David Maloney
25ee278097
strip vestigial realms
...
in the cases where we don't want a realm we should be
stripping it from the credential so we can build accurate results
2014-07-09 17:46:56 -05:00
James Lee
bb3525419e
Rescue the right thing
...
MSP-9707
2014-07-09 17:44:53 -05:00
David Maloney
0c4e53ce5a
fix up specs
...
a whole bunch of spec changes needed for
these changes.
alos the axis2 spec was actually testing the winrm
class due to copypasta error.
2014-07-09 16:32:59 -05:00
David Maloney
c7b37743ef
working realm coercion
...
LoginScanners will now figure out
the right thing to do about Realms
based on attributes of the Scanner itself
2014-07-09 15:56:39 -05:00
David Maloney
24fced822e
coerce realm_key when it exists
...
if the cred has a realm and the loginscanner
has a realm_key, make the credential use the
scanner's realm key
2014-07-09 14:58:20 -05:00
David Maloney
766b50b5e0
REALM_KEY not _TYPE
...
arg typos
2014-07-09 14:01:41 -05:00
James Lee
afe36ab6ad
Merge branch 'staging/electro-release' into feature/MSP-9707/smb-bruteforce-refactor
...
Conflicts:
lib/metasploit/framework/login_scanner/smb.rb
2014-07-09 12:50:24 -05:00
David Maloney
7325cfec64
add default realm values
...
for the scanners that take a realm
we know what the default realm to try is
so the Scanner should hold that info
2014-07-09 11:19:25 -05:00
David Maloney
bc18ca5762
add REALM_KEY to each LoginScanner
...
each LoginScanner should now know
what kind of REALM it takes
2014-07-09 10:53:37 -05:00
dmaloney-r7
b65989ff0c
Merge pull request #100 from rapid7/bug/MSP-10661/glob-rb-files
...
Use glob instead of entries
2014-07-08 14:29:24 -05:00
James Lee
567435f508
Use glob instead of entries
...
Fixes the case where a non-ruby file exists in the login_scanner/
directory
2014-07-08 11:00:33 -05:00
David Maloney
38419dae83
fix to_credential on core
...
the Metasploit::Credential::Core to_credential
method now seats private_type and realm_key correctly
2014-07-07 18:05:04 -05:00
David Maloney
2c13ff4038
Merge branch 'staging/electro-release' into feature/MSP-10656/unify-ssh-scanners
2014-07-07 16:32:39 -05:00
dmaloney-r7
db8b0c907b
Merge pull request #94 from rapid7/feature/MSP-10648/login-scanner-creation
...
Feature/msp 10648/login scanner creation
2014-07-07 16:04:09 -05:00
dmaloney-r7
c4c7ff519f
Merge pull request #96 from rapid7/feature/MSP-10657/add-private-type
...
Add private_type and realm_key accessors to Framework::Credential
2014-07-07 15:43:18 -05:00
David Maloney
b52c13228c
make private_type validation conditional
...
there are times when this won't be filled in
but the credential is still valid
2014-07-07 15:40:52 -05:00
James Lee
2a9ac0a007
Axe SSHKey in favor of a unified SSH
2014-07-07 13:35:17 -05:00
James Lee
71cbbc5388
Merge branch 'feature/MSP-10648/login-scanner-creation' into feature/MSP-10656/unify-ssh-scanners
2014-07-07 13:19:34 -05:00
James Lee
b7cfc927c4
Add private_type and realm_key accessors
2014-07-07 13:07:28 -05:00
James Lee
5c406a2aa5
Remove successes and failures
...
No reason to store them and they could fill a ton of unnecessary memory.
2014-07-07 12:33:15 -05:00
James Lee
7035064f3d
Assignment alignment for Dave
2014-07-07 12:30:04 -05:00
James Lee
8df3ada087
Better docs
2014-07-07 10:18:42 -05:00
James Lee
325d2d25b9
Fix requires and derp typos
2014-07-07 10:09:45 -05:00
James Lee
311f43f1e4
Constpocalypse
2014-07-03 18:49:46 -05:00
James Lee
b7a55d402d
Add likely service ports and names for HTTP
2014-07-02 23:41:31 -05:00
James Lee
9dde47a0bc
Add a simple classes_for_service method
2014-07-02 23:31:56 -05:00
Lance Sanchez
b5351eec2b
adding .to_credential
...
Metasploit::Framework::Credential and Metasploit::Credential::Core
need to be consumable by the login scanners. the easiest way to do this
was to create a shared to_credential method on both that return Metasploit::Framework::Credential
MSP-9912
2014-06-26 11:05:59 -05:00
James Lee
f225ac92ab
Refactor smb_login
...
Maintains the new admin check functionality added in
rapid7/metasploit-framework#3330
2014-06-25 04:13:37 -05:00
James Lee
35c0ef0c68
Merge branch 'feature/MSP-9716/mssql_crack' into staging/electro-release
2014-06-20 12:39:07 -05:00
David Maloney
3c85601426
not every version has dupe supression
2014-06-19 16:28:23 -05:00
David Maloney
4453dcdc8e
some minor fixes
2014-06-19 15:45:24 -05:00
James Lee
9421beedb3
Refactor http_login
2014-06-19 14:12:21 -05:00
David Maloney
0ff8708e6d
some minor fixes
2014-06-19 13:08:43 -05:00
James Lee
b606448976
Merge branch 'feature/MSP-9689/jtr_cracker' into staging/electro-release
2014-06-19 10:14:57 -05:00
James Lee
2d9c6f832a
Moar parens!!1!!
2014-06-19 10:07:21 -05:00
David Maloney
fd0e24cdb2
moar docs!
2014-06-18 11:38:07 -05:00
David Maloney
4b4d9796c5
more minor cleanup
...
cleanup from code review
2014-06-18 11:24:55 -05:00
David Maloney
9f11170c3b
some minor cleanup on jtr stuff
...
minor cleanup to code nstyling stuff
2014-06-18 10:57:41 -05:00
David Maloney
d473d86ef0
use tr instead of gsub for mutation
...
this should be another slight performance
increase as straight up string replacement
should require less overhead then multiple
runs of regex replacement.
2014-06-17 10:29:09 -05:00
James Lee
6237d56398
Refactor ssh_login_pubkey
...
* Fix a bug in LoginScanner::SSHKey (which was copy-pasted from SSH)
where the ssh_socket accessor was not being set because of a
shadowing local var
* Fix a bug in the db command dispatcher where an extra column was
added to the table, causing an unhandled exception when running the
creds command
* Add a big, ugly, untested class for imitating
Metasploit::Framework::CredentialCollection for ssh keys. This class
continues the current behavoir of silently ignoring files that are a)
encrypted or b) not private keys.
* Remove unnecessary proof gathering in the module (it's already
handled by the LoginScanner class)
2014-06-16 18:38:20 -05:00
David Maloney
a81b0ed17b
rename method to_file
...
change method name from write to to_file
as it makes more sense for what it is is doing
and what it returns
2014-06-16 18:03:06 -05:00
David Maloney
95beaa4f7e
correct self-eating array nature
...
we never noticed we were modifying the array in place
because we were reculaculating. now with a memoized
version we would get decreasing results
2014-06-16 17:37:18 -05:00
David Maloney
a92a58417f
memoize the mutation keys
...
it was recalculating the mutation rules
everytime, and there is no reason to do this
2014-06-16 17:18:52 -05:00
David Maloney
f1a39ef973
enumerators all done with specs
...
the enumeration chains are now all complete with specs
so we can enumerate all the words generated by the given options.
2014-06-16 13:31:30 -05:00
David Maloney
9af811a2ed
we need to pass in a workspace
2014-06-15 15:52:57 -05:00
David Maloney
897b0b1ee5
wordlist enumerators with some specs
...
started the enumerators on the wordlist class
and began adding the specs for them
2014-06-15 13:37:50 -05:00
David Maloney
a00ff5aeef
yield custom_wordlist words
2014-06-15 12:16:21 -05:00
David Maloney
41d6b326f2
specs for wordlist validations
...
added specs to cover the validations on
the JtR wordlist class.
2014-06-15 11:14:11 -05:00
David Maloney
a5fb898904
actually set max run time
...
make maxrutnime affect the crack command
2014-06-14 20:03:56 -05:00
David Maloney
33519b1fcd
cracker validations and specs
...
more validations and specs for the cracker class
2014-06-14 19:59:59 -05:00
David Maloney
10f3531bbb
add exectuable validator
...
like the filepath validator but also checks
to see if the file is exectuable by the current
users.
2014-06-14 18:01:24 -05:00
David Maloney
21f29c4da9
more filepath validators
...
added filepath validations to cracker
also made them all conditional validations
2014-06-14 17:54:37 -05:00
David Maloney
1dd69a5228
wordlist validators
...
added custom fielpath vaidator and
added validations to the wordlist class
2014-06-14 17:49:47 -05:00
David Maloney
466576d03f
jtr wordlist validations started
...
start adding validations and exceptions for the
JtR Wordlist class.
2014-06-14 16:16:30 -05:00
David Maloney
19231b7c8f
starting skeleton on wordlist class
...
start framing out JtR wordlist class that
will generate Wordlists to be passed to our
JtR cracker.
2014-06-14 15:48:25 -05:00
David Maloney
41f7bc1372
add common root words wordlist
...
this adds a new wordlist to the data directory.
This wordlist is compiled from statistical analysis of
common Numeric passwords and Common rootwords across
6 years of colleted password breach dumps. Every word in
this list has been seen thousands of times in password
breaches
2014-06-14 14:13:59 -05:00
David Maloney
873d6e5b99
add all the specs
2014-06-14 12:28:17 -05:00
David Maloney
b784bea48e
slow roll of specs for jtr cracker
...
slowly adding spec coverage for the JtR cracker
2014-06-13 16:08:56 -05:00
David Maloney
7187138134
start injecting sanity
2014-06-13 14:53:56 -05:00
David Maloney
a9bcb8b3bd
add skeleton for JtR Cracker
...
starting work on creating the JtR Cracker class
2014-06-13 11:10:12 -05:00
Samuel Huckins
f452652f54
Merge pull request #61 from rapid7/feature/MSP-9708/ssh-bruteforce
...
Functional steps updated and passing, along with specs. Proof being maintained seemed off, but it's not persisted, just used for setting platform.
MSP-9708 #land
2014-06-12 18:37:44 -05:00
Samuel Huckins
d215b8e5b2
Merge pull request #47 from rapid7/feature/MSP-9712/winrm-bruteforce
...
45 merged, steps passing.
MSP-9712 #land
2014-06-12 16:04:17 -05:00
Samuel Huckins
df705c2edc
Gotta keep 'em sepArated.
...
MSP-9712
2014-06-12 16:03:02 -05:00
David Maloney
5fd117a015
fix userpass file stack trace
...
if an improperly formated userpass file was
supplied it could cause a stack trace. add some guarding around it
2014-06-12 12:39:36 -05:00
David Maloney
c074ebda7b
refactor telnet_login
2014-06-11 17:46:42 -05:00
James Lee
c8e1fab6ec
Merge branch 'staging/electro-release' into feature/MSP-9708/ssh-bruteforce
...
Conflicts:
lib/metasploit/framework/credential.rb
2014-06-11 16:28:01 -05:00
James Lee
b756395eaa
Merge branch 'staging/electro-release' into feature/MSP-9712/winrm-bruteforce
...
Conflicts:
lib/metasploit/framework/credential_collection.rb
spec/lib/metasploit/framework/credential_collection_spec.rb
2014-06-11 16:21:59 -05:00
dmaloney-r7
9affc753c0
Merge pull request #66 from rapid7/feature/cred-collection-prepend
...
Add ability to prepend creds to a collection
2014-06-11 14:34:54 -05:00
James Lee
3a8f6236ad
Add ability to prepend creds to a collection
2014-06-11 14:30:45 -05:00
Samuel Huckins
84aa0d42ed
Merge pull request #57 from rapid7/bug/MSP-10004/rubyzip
...
Trevor added a 0.4.1 tag right before this PR landed, making this unmergable. Pulled in staging/electro-release, specs passing.
2014-06-11 13:48:03 -05:00
James Lee
fb8c1f4c4b
Refactor ssh_login to use LoginScanner stuffs
...
Also, Metasploit::Credential::Creation stuffs.
2014-06-10 17:30:06 -05:00
Luke Imhoff
4d923a4809
Update to Rubyzip 1.X API
...
MSP-10004
`require 'zip'` instead of `'zip/zip'` and rename all classes to remove
redundant Zip prefix inside the Zip namespace.
2014-06-10 13:41:42 -05:00
David Maloney
e9d9806408
invalidate_login
...
added invalidate_login call
also made to_s on credential drop the @
if there is no realm present
2014-06-10 11:07:15 -05:00
James Lee
552899ef13
Add a couple more specs for CredentialCollection
...
Also fixes some typos in docs
2014-06-06 12:12:32 -05:00
David Maloney
4d53c18ac4
fix version
2014-06-06 12:07:22 -05:00
dmaloney-r7
ff8e6d2c50
Merge pull request #45 from rapid7/feature/MSP-9988/credential-collection
...
Add a CredCollection class and refactor WinRM bruteforce module
2014-06-06 11:53:28 -05:00
Luke Imhoff
f2a56c041b
Merge branch 'staging/electro-release' into feature/MSP-9653/use-metasploit-concern-in-pro
...
MSP-9653
Conflicts:
Gemfile
Gemfile.lock
2014-06-05 16:22:02 -05:00
David Maloney
c61b47063d
vnc add missing exception catch
...
linux throws a different exception than osx
when the vnc client fails to connect
this caused issues with the specs running. this now
catches that additional exception
2014-06-05 15:32:08 -05:00
James Lee
b1136752be
Add Credential#== to facilitate specs
2014-06-05 11:37:48 -05:00
James Lee
8b6e188ba8
Add support for realm in CredentialCollection
...
MSP-9988
2014-06-04 17:03:52 -05:00
James Lee
b1ff6b95b5
Better docs
2014-06-04 14:44:53 -05:00
James Lee
41644970bf
Add a CredentialCollection
...
Also moves Metasploit::Framework::LoginScanner::Credential to
Metasploit::Framework::Credential
2014-06-04 13:01:09 -05:00
Lance Sanchez
edc9f94d41
fixing issues raised in code review
...
MSP-9678
2014-06-03 11:15:26 -05:00
Lance Sanchez
15fffb1668
Adding in some tests
...
cleaning up the regex a bit
MSP-9678
2014-06-02 13:50:30 -05:00
Luke Imhoff
9e78509aac
Merge branch 'staging/electro-release' into feature/MSP-9653/use-metasploit-concern-in-pro
...
MSP-9653
Conflicts:
Gemfile
Gemfile.lock
2014-06-02 13:40:11 -05:00
Luke Imhoff
ebf61bef22
Metasploit::Framework::Engine
...
MSP-9653
Rails::Engine version of Metasploit::Framework::Application that can be
used by downstream projects, like Pro to get the shared behaviors, like
modules path adding, meterpreter extension merging, and binary default
encoding.
2014-06-02 13:00:22 -05:00
Luke Imhoff
9d326fcb24
Extra common engine and fix default encoding
...
MSP-9653
Extra config and initializers that can we shared between
Metasploit::Framework::Application and the future
Metasploit::Framework::Engine. Move the default encoding setup from
lib/msf/sanity.rb to a before_initialize callback for the shared config
so that gems, like gherkin that depend on the utf-8 default internal
encoding can be loaded.
2014-06-02 12:57:48 -05:00
Luke Imhoff
3ebe7dfbc8
Gem version
...
MSP-9653
Move version information to standard location for gems.
2014-06-02 12:54:46 -05:00
Luke Imhoff
84f5a0d499
Explicitly require gem dependencies
...
MSP-9653
2014-06-02 12:27:15 -05:00
Lance Sanchez
f2a2975bc1
Merge branch 'staging/electro-release' into feature/MSP-9678/pop3-login-scanner
2014-06-02 10:56:54 -05:00
Trevor Rosen
8bcd763039
Merge pull request #26 from rapid7/feature/MSP-9685/telnet_login_scanner
...
Feature/msp 9685/telnet login scanner
MSP-9685 #land
2014-05-30 13:40:18 -05:00
David Maloney
2c6f89a58d
add sane default for connection timeout
2014-05-29 11:12:59 -05:00
David Maloney
eb04a3774a
fixes for telnet wierdness
...
had to work around the way the old
Auxiliary::Login mixin worked. Scanner
now works properly
2014-05-29 10:43:00 -05:00
James Lee
572e4f2bdf
Fix dumb missing options and add spec
2014-05-28 16:32:38 -05:00
David Maloney
1bc2140fa6
Telnet LoginScanner basics
...
basic Telnet LoginScanner with shell
specs. Need to test functionality
and write additional specs
2014-05-28 14:47:58 -05:00
David Maloney
747395e383
create telnet clinet mixin
...
copy paste existing stuff repurposed for use
in a real class instead of a metasploit module
2014-05-28 13:53:50 -05:00
Lance Sanchez
07a61ae696
adding in changes from before my vacation..
...
MSP-9678
2014-05-28 13:18:28 -05:00
James Lee
3ac2182984
First stab at axis2 login scanner
2014-05-27 23:53:04 -05:00
dmaloney-r7
85737d1235
Merge pull request #22 from rapid7/feature/MSP-9646/afp-loginscanner
...
AFP login scanner
2014-05-22 15:05:24 -05:00
James Lee
5d1a0397ed
Add Tomcat login scanner
2014-05-21 14:28:54 -05:00
James Lee
8be35b90f4
Add some more specs for AFP login scanner
2014-05-20 17:44:41 -05:00
James Lee
d061d36229
Merge branch 'staging/electro-release' into feature/MSP-9646/afp-loginscanner
2014-05-20 17:25:42 -05:00
James Lee
21de14ac3d
Initial stab at AFP login scanner
2014-05-20 17:08:12 -05:00
Samuel Huckins
62bae8e23b
Merge pull request #21 from rapid7/feature/MSP-9687/winrm-loginscanner
...
Specs and functional steps passing.
MSP-9687 #land
2014-05-20 11:32:37 -05:00
Samuel Huckins
d9687d87f9
Merge pull request #20 from rapid7/feature/MSP-9667/db2_login
...
Specs passing post update.
MSP-9667 #land
2014-05-16 11:29:31 -05:00
David Maloney
02a9d7f15d
minor cleanup
...
minor style changes found in code review
2014-05-16 11:20:04 -05:00
James Lee
9582d82fba
Merge remote-tracking branch 'private/staging/electro-release' into feature/MSP-9687/winrm-loginscanner
2014-05-15 13:59:48 -05:00
James Lee
8a9abb90c0
Add specs for connection error conditions
2014-05-15 10:06:17 -05:00
Lance Sanchez
e9b3f10ba7
Drying up some of the status codes
...
MSP-9678
2014-05-14 17:02:26 -05:00
James Lee
59050d9bf1
Add specs for WinRM, improve those for HTTP
2014-05-14 15:13:29 -05:00
James Lee
99f8fbbc9c
Add WinRM login scanner
...
* Genericizes HTTP a bit to make these kinds of HTTP-based scanners
simpler and easier
* Adds support for default ports to HTTP. This should probably be
rafactored up into Base
* Removes spec that complains about port being unset (which now fails
because defaults ensure it's always set)
2014-05-14 14:35:49 -05:00
Luke Imhoff
82d32e39cc
Merge branch 'feature/MSP-9686/vnc_login' into staging/electro-release
...
MSP-9686
2014-05-14 13:24:13 -05:00
Luke Imhoff
a32152ecaa
Merge branch 'staging/electro-release' into feature/MSP-9686/vnc_login
...
MSP-9686
2014-05-14 13:22:41 -05:00
dmaloney-r7
acaf713229
Merge pull request #17 from rapid7/feature/MSP-9606/metasploit-credential
...
Run migrations from Metasploit::Credential and initialize its concerns which patch Mdm
2014-05-14 11:15:07 -05:00
Lance Sanchez
6a029bee02
Merge branch 'staging/electro-release' into feature/MSP-9678/pop3-login-scanner
2014-05-14 10:13:46 -05:00
David Maloney
f34090946e
derp
2014-05-14 10:10:57 -05:00
Lance Sanchez
06796fb27c
returning the result class
...
MSP-9678
2014-05-14 10:09:52 -05:00
David Maloney
2faa015bf3
some minor cleanup
...
minor edits requested by kronicdeth during
code review
2014-05-14 10:09:26 -05:00
James Lee
8a9027b21d
Add better #inspect for Credential and Result
2014-05-14 10:04:40 -05:00
Lance Sanchez
3c0625e393
hacking on the pop3 login scanner
...
MSP-9678
2014-05-14 09:44:23 -05:00
David Maloney
72b3c4da35
working DB2 loginscanner
...
w00t
2014-05-13 14:41:15 -05:00
Samuel Huckins
162038bde4
Merge pull request #19 from rapid7/feature/login_scanner/smb
...
Specs all passing, functional steps working.
2014-05-13 14:37:13 -05:00
David Maloney
f5751d6a85
first pass at attempt_login for DB2
...
first pass through at the attempt_login method
for the DB2 LoginScanner. still adding specs
and possibly refactoring
2014-05-13 14:10:30 -05:00
James Lee
2d7e90d5df
Remove vestigal require
2014-05-13 13:39:40 -05:00
David Maloney
5dcf3efd1a
skeleton for DB2 loginscanner
...
add basic skeleton and specs for the DB2
LoginScanner class.
2014-05-13 13:16:56 -05:00
Luke Imhoff
3370465d84
Use railties to load Metasploit::Credential correctly
...
MSP-9606
In order to support Metasploit::Credential correctly,
metasploit-framework needs to support Metasploit::Concern, which does
all its magic using a Rails::Engine initializer, so the easiest path is
to make metasploit-framework be able to use Rails::Engines. To make
Rails::Engine use Rails::Engine, make a dummy Rails::Application
subclass so that all the initializers will be run when anything requires
msfenv.
2014-05-12 15:03:51 -05:00
David Maloney
f84d763382
refactoring conditional logic
...
the class works but the conditional logic needs
refactoring to be smoothed out more.
2014-05-12 11:10:36 -05:00
James Lee
fe3acf08f5
Handle exceptions without error_code
...
Also sets smb_direct in attempt_login, which makes this work correctly
when port wasn't set in the constructor.
2014-05-12 10:31:11 -05:00
James Lee
3831042dca
Add specs, validations for LoginScanner::SMB
2014-05-09 18:58:49 -05:00
James Lee
ee6a9f99b3
Add require for active_model
...
Having proper requires allows loading scanners in IRB without msfconsole
2014-05-09 18:16:19 -05:00
David Maloney
4e76330643
Add skeleton for VNC lgoinscanner
...
Add skeleton and specs for the VNC Loginscanner
MSP-9686
2014-05-09 11:55:15 -05:00
Trevor Rosen
c77412d373
Merge pull request #13 from rapid7/feature/login_scanner/mysql
...
Add LoginScanner for MySQL
MSP-9676 #land
2014-05-08 15:05:24 -05:00
Trevor Rosen
894ecaafb4
Merge pull request #12 from rapid7/feature/login_scanner/pg
...
Add Postgres LoginScanner class
MSP-9679 #land
2014-05-08 14:38:56 -05:00
David Maloney
42de1ab1f1
whitespace removal
2014-05-08 14:18:06 -05:00
David Maloney
d16a4a4c1d
add sane defaults to MySQl
...
MySQL LoginScanner now with sane defaults
for TCP evasion stuff
2014-05-08 13:57:58 -05:00
David Maloney
cfb13ed1bd
Merge branch 'staging/electro_release' into feature/login_scanner/mysql
2014-05-08 13:55:09 -05:00
James Lee
2d2b5ea9e4
Merge remote-tracking branch 'private/feature/login_scanner/mssql' into feature/login_scanner/smb
2014-05-08 13:45:06 -05:00
David Maloney
e0c6e90ae8
trivial cleanup work
...
whitespace and alignment stuff
2014-05-08 13:42:52 -05:00
James Lee
13fe8c0869
Default Credential#paired to true
2014-05-08 13:34:31 -05:00
David Maloney
20edabb0f5
mySQL Loginscanner with specs to match
...
This season's colours for Loginscanner is MySQL
with Unit Test Coverage applied to match.
2014-05-08 13:16:12 -05:00
David Maloney
b72f0f8ffc
try to fix bad push/revert mess
2014-05-07 18:43:37 -05:00
David Maloney
9919d54116
Revert "final touches and specs"
...
This reverts commit e025fa1791
.
2014-05-07 18:34:34 -05:00
David Maloney
e025fa1791
final touches and specs
...
add finishing touches to postgres
Loginscanner and add specs to cover
the behaviour
2014-05-07 18:32:36 -05:00
James Lee
338ed7bd18
First attempt at smb login scanner
2014-05-07 16:38:56 -05:00
David Maloney
7a476dc21a
fully operational lgoinscanner
...
Now you will witness the power of this fully operational
LoginScanner. fire at will, Commander!
2014-05-07 15:57:06 -05:00
David Maloney
ec974535ac
create base object for mssql scanner
...
created skeleton for MSSQL Loginscanner
included concerns.
also added an NTLM concern and shared example group
2014-05-07 14:43:15 -05:00
David Maloney
234e129523
add NTLM concern for loginscanners
...
add a new concern for LoginScanners
that provides the basic accessors and validations
for anything requiring NTLM
2014-05-07 14:28:10 -05:00
David Maloney
e6b15541ff
replace datastore calls
...
replace datastore calls with stub
methods that will be implmeneted by the loginscanner
2014-05-07 11:41:49 -05:00
James Lee
9ad5ae44be
Add abstract attempt_login and cleanup some docs
2014-05-06 15:24:18 -05:00
David Maloney
6077135782
extract login neccisary methods
...
create new mssql mixin. extract only the methods
required for mssql_login to work and copy them
into this mixin.
2014-05-06 11:59:21 -05:00
David Maloney
5e6f57f711
fix up some more specs
...
some spec cleanup and added basic specs
to the HTTP LoginScanner
2014-05-01 12:10:51 -05:00
David Maloney
1a5abc49d1
Merge branch 'staging/electro_release' into feature/login_scanners/mixin_refactor
...
Conflicts:
lib/metasploit/framework/login_scanner/ftp.rb
lib/metasploit/framework/login_scanner/ssh.rb
lib/metasploit/framework/login_scanner/ssh_key.rb
2014-05-01 10:19:00 -05:00
David Maloney
0dd22395eb
use credential objects inside results
...
altered results to just hold a credential
object instead of duplicating attributes
2014-04-30 17:17:57 -05:00
Lance Sanchez
3d94a1f77d
Merge branch 'feature/http_login_scanner' into staging/electro_release
2014-04-30 16:30:46 -05:00
David Maloney
2483a37c04
Rexsocket mixin for LoginScanners
...
add a mixin for Rex Socket dependent behaviour
in certain Loginscanners to DRY up code more
2014-04-30 15:43:28 -05:00
James Lee
6a41697955
Add require
2014-04-30 15:03:49 -05:00
David Maloney
a4cc311106
test base behaviour in shared examples
...
start moving specs to a shared example group
for all behaviour defined by the LoginScanner
Base
2014-04-30 14:35:29 -05:00
David Maloney
f1e303d400
add connection error handling
...
if we get too many connection errors
or too many errors in a row, we bail on
the host
2014-04-30 14:06:18 -05:00
David Maloney
a08421b30f
apply reasonable defaults
...
give each lgoinscanner the ability to select
reasonable defaults for certain attributes
2014-04-30 13:56:29 -05:00
James Lee
ea8dc4db5d
Handle connection errors
...
Also fix up some yardoc issues
2014-04-30 13:33:39 -05:00
James Lee
b617be3dda
Move doc to the right place
2014-04-30 13:30:42 -05:00
David Maloney
ad264cb031
remove dead variable
...
dead variable left in a method from
a previous code iteration. removed
2014-04-30 13:30:09 -05:00
David Maloney
90882f803b
use base mixin in scanners
...
refactor the LoginScanner classes to use the
new Base mixin. Still some more cleanup to be done
2014-04-30 13:29:14 -05:00
David Maloney
7978587428
add lgoinscanner base mixin
...
start moving common behaviour for
all LoginScanners into a mixin
2014-04-30 13:11:48 -05:00
David Maloney
f61ede7fd2
fix merge wonkiness
2014-04-30 10:23:20 -05:00
David Maloney
e5276d111d
Merge branch 'staging/electro_release' into feature/login_scanner/snmp
...
Conflicts:
lib/metasploit/framework/login_scanner/result.rb
2014-04-30 10:21:35 -05:00
James Lee
e8e5a7f72b
Add initial stab at LoginScanner::HTTP
2014-04-30 00:55:45 -05:00
Lance Sanchez
ddee401e27
Merge branch 'feature/MSP-9684/sshkey_loginscanner' into staging/electro_release
...
MSP-9684 #land
2014-04-29 15:21:56 -05:00
David Maloney
5c24eab526
add snmp specific behaviour
...
add the snmp specific attempt_login behaviour
to gear this login scanner to the right protocol.
2014-04-29 14:08:30 -05:00
David Maloney
f1105ebe48
basic template copypasta
...
copy the ssh scanner as a template to
start the SNMP scanner from
2014-04-29 10:14:23 -05:00
David Maloney
00b9c99c89
fix class documentation copypasta
2014-04-29 10:13:11 -05:00
David Maloney
08b2974454
fix class documentation
2014-04-29 10:12:26 -05:00
David Maloney
0fcfb9d655
add proxies to ssh scanner
...
allow the SSH LoginScanner
to accept a proxy directive
2014-04-25 14:22:21 -05:00
David Maloney
35a039848c
add sshkey loginscanner
...
added the loginscanner class for SSHKey and
the base specs
2014-04-25 14:21:08 -05:00
David Maloney
2346d583ed
touchups and specsfor FTP Scanner
...
add some final touchups and specs to the FTP
Loginscanner object. now fully working.
2014-04-25 11:02:15 -05:00
David Maloney
838a444b23
first pass of FTP LoginScanner
...
made the first pass at the ftp
LoginScanner, with base specs.
Need to still tierate, add more new
specs and clean it up
2014-04-25 10:14:48 -05:00
David Maloney
1f9cf8c68f
add the mixins for tcp and ftp
...
skimmed down, non-module dependent mixins
for TCP client and Ftp client. neccesary for
loginscanner work
2014-04-24 13:39:04 -05:00
David Maloney
3a66723741
nake scan! more generic
...
scan! can now be reused for each scanner and
only attempt_login is specific for each thing.
2014-04-24 09:43:39 -05:00
David Maloney
ed8f87d3cf
allow scan! to take a blcok
...
by allowing scan! to take block
and yield the result of each attempt
we can do things like have a module print out
status messages
2014-04-23 12:41:10 -05:00
David Maloney
d25f0d8f6c
cash host resolution
...
if we successfuly resolve the host during
the validation, then alter host to the resolved
address to avoid the overhead of subsequent
DNS requests.
2014-04-22 15:34:16 -05:00
David Maloney
0439569ffb
more documentation work
...
added some more YARD docs
2014-04-22 11:48:14 -05:00
David Maloney
a613d044f5
more cleanup work
...
some code and documentation DRY work
2014-04-22 11:38:24 -05:00
David Maloney
bc092af855
Fix credential docs
...
expanded return types for the Credential
object to be more accurate
2014-04-22 11:05:12 -05:00
David Maloney
b731889c79
add class level documentation
...
add some comments for YARD to have class
level documentation for each class
2014-04-22 10:59:28 -05:00
David Maloney
526bb4989a
more explicit requires
...
LoginScanner module brings in all the deps
while the individual classes require
the module then to get their deps.
2014-04-22 10:28:01 -05:00
David Maloney
645eef51b7
Rename CredDetail to Credential
...
it was felt this was better naming
for the class. Refactored all occurence
2014-04-22 10:25:36 -05:00
David Maloney
f079d3f3a9
move requires into module
...
move all the requires into the LoginScanner
module area to clean up requires
2014-04-21 19:14:50 -05:00
David Maloney
9c6528f13f
use the CredDetail class
...
now that we have the new CredDetail
class, use it instead of hashes
2014-04-21 18:58:23 -05:00
David Maloney
1a6ef8dced
allow for balnk passwords
...
have to alter validation slightly
to allow for blank passwords
2014-04-21 18:57:28 -05:00
David Maloney
fd1777a79f
add CredDetail class
...
rather than passing dumb hashes around
added a CredDetail class that comes
with it's own conditional validations
2014-04-21 18:26:38 -05:00
David Maloney
de2bb7d66c
dd tests for #scan!
...
the scan! method is mostly done
and has unit tests
2014-04-21 17:59:50 -05:00
David Maloney
2e11f80a98
refactor to use Result class
...
we now use a Result class to handle
all result codes from the login attempt
2014-04-21 15:35:16 -05:00
David Maloney
d313047532
add loginscanner result class
...
add a result class to have more
tightly defined return values from
the loginscanner classes
2014-04-21 15:11:56 -05:00
David Maloney
aa1d1be786
do not create sessions with scanner
...
the session creation behaviour is
currently inextricably linked to module
behaviour. We will have our scanner class
only return success status. The calling module
will be responsible for opening sessions afterwards.
2014-04-21 11:38:48 -05:00
David Maloney
7571fe1f68
fix host validation
...
host validation was buggy, fixed it
2014-04-21 11:34:40 -05:00
David Maloney
9a15a2be04
basic login attempt functionality
...
groundowkr now layed for trying
authentication attempts on the
SSH LoginScanner, with test coverage
2014-04-18 20:08:28 -05:00
David Maloney
85349ccec4
SSH connection exception handling
...
added in the exception handling
around the Net::SSH conenction
in attempt_login
2014-04-18 18:13:05 -05:00
David Maloney
17b4d4a416
Add more attributes and validations
...
Added some more attributes neccesary
for the actual running of the login scan
as well as accompanying validations and
specs
2014-04-18 16:23:35 -05:00
David Maloney
756488b581
last of the validations
...
finalized validation for SSH lgoinscanner
2014-04-16 13:34:23 -05:00
David Maloney
bf20ed5812
add validations for cred_details
...
Adds validator for the cred_details
attribute on the SSH Login Scanner.
Makes sure propper input is always supplied
for the scanner.
2014-04-16 13:20:14 -05:00
David Maloney
434391c308
add host validations to ssh scanner
...
add validations to the :host attribute
on the SSH LoginScanner
2014-04-16 10:26:00 -05:00
David Maloney
02a17b8612
namespace change to Metasploit
...
chaning the code to live in the namespace of
Metasploit::Framework instead of Msf::Auxiliary
MSP-9683
2014-04-15 17:11:25 -05:00
Tab Assassin
7e5e0f7fc8
Retab lib
2013-08-30 16:28:33 -05:00
Luke Imhoff
0bb79ba890
Msf::DBManager#import_msf_xml refactor
...
[#46491831 ]
Move Msf::DBManager#import_msf_xml into
Msf::DBManager::ImportMsfXml#import_msf_xml and include
Msf::DBManager::ImportMsfXml to cut down size of the infamous db.rb.
Break up #import_msf_xml to have separate methods for parsing web_forms,
web_pages, and web_vulns. The method for
web_vulns, #import_msf_web_vuln_element is needed so that it can be overridden in
Pro to handle the Pro-only changes to Mdm::WebVuln.
2013-04-01 16:06:40 -05:00
Luke Imhoff
f1a4fd937a
Specs for activerecord patch
...
[#46141013 ]
Spec the desired behavior for ConnectionPool prior to removing the patch
to sync with upstream 3.2.12.
2013-03-18 11:01:45 -05:00