132 lines
5.0 KiB
C
132 lines
5.0 KiB
C
#ifndef __AR531X_H
|
|
#define __AR531X_H
|
|
|
|
#include <asm/cpu-info.h>
|
|
#include <ar531x_platform.h>
|
|
#include "ar5312.h"
|
|
#include "ar5315.h"
|
|
|
|
/*
|
|
* Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
|
|
* using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
|
|
*/
|
|
#ifdef CONFIG_ATHEROS_AR5312
|
|
#define DO_AR5312(...) \
|
|
if (current_cpu_data.cputype != CPU_4KEC) { \
|
|
__VA_ARGS__ \
|
|
}
|
|
#else
|
|
#define DO_AR5312(...)
|
|
#endif
|
|
#ifdef CONFIG_ATHEROS_AR5315
|
|
#define DO_AR5315(...) \
|
|
if (current_cpu_data.cputype == CPU_4KEC) { \
|
|
__VA_ARGS__ \
|
|
}
|
|
#else
|
|
#define DO_AR5315(...)
|
|
#endif
|
|
|
|
#include <irq.h>
|
|
|
|
#define AR531X_HIGH_PRIO 0x10
|
|
#define AR531X_MISC_IRQ_BASE 0x20
|
|
#define AR531X_GPIO_IRQ_BASE 0x30
|
|
|
|
/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
|
|
#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
|
|
#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
|
|
|
|
/* Miscellaneous interrupts, which share IP6 */
|
|
#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
|
|
#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
|
|
#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
|
|
#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
|
|
#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
|
|
#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
|
|
#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
|
|
#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
|
|
#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
|
|
#define AR531X_MISC_IRQ_COUNT 9
|
|
|
|
/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
|
|
#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0
|
|
#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1
|
|
#define AR531X_GPIO_IRQ_COUNT 22
|
|
|
|
#define sysRegRead(phys) \
|
|
(*(volatile u32 *)KSEG1ADDR(phys))
|
|
|
|
#define sysRegWrite(phys, val) \
|
|
((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
|
|
|
|
/*
|
|
* This is board-specific data that is stored in a "fixed" location in flash.
|
|
* It is shared across operating systems, so it should not be changed lightly.
|
|
* The main reason we need it is in order to extract the ethernet MAC
|
|
* address(es).
|
|
*/
|
|
struct ar531x_boarddata {
|
|
u32 magic; /* board data is valid */
|
|
#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
|
|
u16 cksum; /* checksum (starting with BD_REV 2) */
|
|
u16 rev; /* revision of this struct */
|
|
#define BD_REV 4
|
|
char boardName[64]; /* Name of board */
|
|
u16 major; /* Board major number */
|
|
u16 minor; /* Board minor number */
|
|
u32 config; /* Board configuration */
|
|
#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
|
|
#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
|
|
#define BD_UART1 0x00000004 /* UART1 is stuffed */
|
|
#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
|
|
#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
|
|
#define BD_SYSLED 0x00000020 /* System LED stuffed */
|
|
#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
|
|
#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
|
|
#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
|
|
#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
|
|
#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
|
|
#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
|
|
#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
|
|
#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
|
|
#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
|
|
#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
|
|
#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
|
|
#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
|
|
u16 resetConfigGpio; /* Reset factory GPIO pin */
|
|
u16 sysLedGpio; /* System LED GPIO pin */
|
|
|
|
u32 cpuFreq; /* CPU core frequency in Hz */
|
|
u32 sysFreq; /* System frequency in Hz */
|
|
u32 cntFreq; /* Calculated C0_COUNT frequency */
|
|
|
|
u8 wlan0Mac[6];
|
|
u8 enet0Mac[6];
|
|
u8 enet1Mac[6];
|
|
|
|
u16 pciId; /* Pseudo PCIID for common code */
|
|
u16 memCap; /* cap bank1 in MB */
|
|
|
|
/* version 3 */
|
|
u8 wlan1Mac[6]; /* (ar5212) */
|
|
};
|
|
|
|
#define BOARD_CONFIG_BUFSZ 0x1000
|
|
|
|
extern char *board_config, *radio_config;
|
|
extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
|
|
extern int ar531x_find_config(char *flash_limit);
|
|
|
|
extern void ar5312_prom_init(void);
|
|
extern void ar5312_misc_intr_init(int irq_base);
|
|
extern void ar5312_plat_setup(void);
|
|
extern asmlinkage void ar5312_irq_dispatch(void);
|
|
|
|
extern void ar5315_prom_init(void);
|
|
extern void ar5315_misc_intr_init(int irq_base);
|
|
extern void ar5315_plat_setup(void);
|
|
extern asmlinkage void ar5315_irq_dispatch(void);
|
|
|
|
#endif
|