wifipineapple-openwrt/target/linux/coldfire/patches/088-m547x_8x_i2c_timeout_fi...

124 lines
2.8 KiB
Diff

From b9607c9083b767eac26df1d39a030f3cba5d3ae3 Mon Sep 17 00:00:00 2001
From: Kurt Mahan <kmahan@freescale.com>
Date: Fri, 18 Jul 2008 12:40:04 -0600
Subject: [PATCH] Increase timeouts on I2C bus.
LTIBName: m547x-8x-i2c-timeout-fix
Signed-off-by: Shrek Wu <b16972@freescale.com>
---
drivers/i2c/busses/i2c-mcf548x.c | 40 +++++++++++++++++++++++++++++--------
1 files changed, 31 insertions(+), 9 deletions(-)
--- a/drivers/i2c/busses/i2c-mcf548x.c
+++ b/drivers/i2c/busses/i2c-mcf548x.c
@@ -43,8 +43,8 @@ static struct i2c_adapter i2c_mcf_board_
.id = I2C_HW_MPC107,
.algo_data = &i2c_mcf_board_data,
.class = I2C_CLASS_HWMON,
- .timeout = 1,
- .retries = 1
+ .timeout = 100,
+ .retries = 2
};
/*
* static void i2c_start()
@@ -105,7 +105,7 @@ wait_for_bb(
for (i = 0; i < adap->timeout; i++) {
if (!(MCF_I2SR & MCF_I2SR_IBB))
return 0;
- udelay(10);
+ udelay(100);
}
printk(KERN_ERR "%s: timeout", __FUNCTION__);
return -ETIMEDOUT;
@@ -124,7 +124,7 @@ wait_for_not_bb(
for (i = 0; i < adap->timeout; i++) {
if (MCF_I2SR & MCF_I2SR_IBB)
return 0;
- udelay(10);
+ udelay(100);
}
printk(KERN_ERR "%s: timeout", __FUNCTION__);
return -ETIMEDOUT;
@@ -146,7 +146,7 @@ wait_xfer_done(
MCF_I2SR &= ~MCF_I2SR_IIF;
return 0;
}
- udelay(1);
+ udelay(10);
}
printk(KERN_ERR "%s: timeout", __FUNCTION__);
return -ETIMEDOUT;
@@ -166,7 +166,7 @@ i2c_set_addr(
) {
unsigned short flags = msg->flags;
unsigned char addr;
-
+ MCF_I2CR |= MCF_I2CR_MTX;
if ((flags & I2C_M_TEN)) {
/* 10 bit address not supported yet */
return -EIO;
@@ -269,7 +269,7 @@ mcf_sendbytes(
i2c_stop(adap);
wait_for_bb(adap);
} else {
- i2c_repstart(adap);
+ /* i2c_repstart(adap);*/
}
return (i);
@@ -330,7 +330,7 @@ mcf_readbytes(
i2c_stop(adap);
wait_for_bb(adap);
} else {
- i2c_repstart(adap);
+ /* i2c_repstart(adap);*/
}
return (i+1);
@@ -380,6 +380,27 @@ mcf_xfer(
wait_for_bb(adap);
for (i = 0; ret >= 0 && i < num; i++) {
+ if (MCF_I2SR & MCF_I2SR_IBB) {
+ MCF_I2ICR = 0x00;
+ MCF_I2CR = 0x00;
+ MCF_I2CR = 0x0A;
+ timeout = MCF_I2DR;
+ MCF_I2SR = 0x00;
+ MCF_I2CR = 0x00;
+ MCF_I2ICR = 0x01;
+ }
+ /* setup SCL clock */
+ MCF_I2FDR = get_clock(adap);
+ /* set slave address */
+ MCF_I2AR = get_own(adap);
+ /* enable I2C module */
+ MCF_I2CR = MCF_I2CR_IEN;
+
+ MCF_I2CR |= MCF_I2CR_TXAK;
+
+ /* Check for bus busy */
+ wait_for_bb(adap);
+
pmsg = &msgs[i];
printk(KERN_DEBUG "i2c-algo-mcf: Doing %s %d bytes "
@@ -388,7 +409,7 @@ mcf_xfer(
pmsg->len, pmsg->addr, i + 1, num);
/* Send START */
- if (i == 0)
+ /*if (i == 0)*/
i2c_start(adap);
/* Wait for Bus Busy */
@@ -440,6 +461,7 @@ mcf_xfer(
"%d bytes.\n", ret);
}
}
+ MCF_I2CR = 0;
}
/* Disable I2C module */