wifipineapple-openwrt/target/linux/adm5120/patches/300-i2c_gpio_custom.patch

35 lines
1.3 KiB
Diff

Index: linux-2.6.24.2/drivers/i2c/busses/Kconfig
===================================================================
--- linux-2.6.24.2.orig/drivers/i2c/busses/Kconfig
+++ linux-2.6.24.2/drivers/i2c/busses/Kconfig
@@ -146,6 +146,17 @@ config I2C_GPIO
This is a very simple bitbanging I2C driver utilizing the
arch-neutral GPIO API to control the SCL and SDA lines.
+config I2C_GPIO_CUSTOM
+ tristate "Custom GPIO-based I2C driver"
+ depends on GENERIC_GPIO
+ select I2C_GPIO
+ help
+ This is an I2C driver to register 1 to 4 custom I2C buses using
+ GPIO lines.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-gpio-custom.
+
config I2C_HYDRA
tristate "CHRP Apple Hydra Mac I/O I2C interface"
depends on PCI && PPC_CHRP && EXPERIMENTAL
Index: linux-2.6.24.2/drivers/i2c/busses/Makefile
===================================================================
--- linux-2.6.24.2.orig/drivers/i2c/busses/Makefile
+++ linux-2.6.24.2/drivers/i2c/busses/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bf
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+obj-$(CONFIG_I2C_GPIO_CUSTOM) += i2c-gpio-custom.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o