Felix Fietkau cb96e3bad4 set atheros default kernel version to 2.6.30.4 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17122 3c298f89-4303-0410-b956-a3cf2f4a3e73		2009-08-04 10:51:12 +00:00
..
base-files/etc	atheros: configure eth1 as wan interface by default, if present	2009-04-28 23:27:46 +00:00
image	[atheros] rename picostation pico2 images to openwrt-atheros-ubnt2-pico2-... to avoid confusion	2009-04-21 01:36:19 +00:00
patches-2.6.28	[atheros] export ar231x_gpiodev, needed for gpio-led/spi/i2c modules	2009-07-18 17:52:36 +00:00
patches-2.6.30	[atheros] export ar231x_gpiodev, needed for gpio-led/spi/i2c modules	2009-07-18 17:52:36 +00:00
Makefile	set atheros default kernel version to 2.6.30.4	2009-08-04 10:51:12 +00:00
config-2.6.28	atheros: disable CONFIG_LEDS_GPIO by default, it causes flash access errors on devices that use a non-standard gpio line to control the spi flash chip select	2009-07-10 15:26:12 +00:00
config-2.6.30	atheros: disable CONFIG_LEDS_GPIO by default, it causes flash access errors on devices that use a non-standard gpio line to control the spi flash chip select	2009-07-10 15:26:12 +00:00