OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau f7a9482416 mac80211: fix setting txpower (#12594)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-10 13:51:09 +00:00
docs [docs] update switch documentation 2012-10-12 12:13:56 +00:00
include kernel: update linux 3.6 to 3.6.9 2012-12-08 15:01:33 +00:00
package mac80211: fix setting txpower (#12594) 2012-12-10 13:51:09 +00:00
scripts [toolchain] remove support for ubicom32 2012-11-30 10:53:55 +00:00
target ar71xx: load ar934x_nfc driver earlier 2012-12-10 10:38:11 +00:00
toolchain toolchain: use file_copy to install the initial gcc files 2012-12-02 12:20:47 +00:00
tools firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1 2012-12-07 19:10:54 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space 2012-12-02 13:04:01 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build 2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org