wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Florian Fainelli f743b898f1 Resync kernel config, make kernel.{flash,ram}.srec available git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9402 3c298f89-4303-0410-b956-a3cf2f4a3e73		2007-10-22 16:17:09 +00:00
docs	apply latex style patch posted on openwrt-devel@lists	2007-09-29 11:35:51 +00:00
include	make aliases for package targets if the package directories are in further subdirectories	2007-10-21 07:18:10 +00:00
package	fix mac80211 compile	2007-10-21 13:04:32 +00:00
scripts	remove the dummy profile that was created on targets that have subtargets	2007-10-21 06:44:06 +00:00
target	Resync kernel config, make kernel.{flash,ram}.srec available	2007-10-22 16:17:09 +00:00
toolchain	changed the -fhonours-copts gcc patch, such that the function needs to be turned on explicitly	2007-10-07 00:26:02 +00:00
tools	ar7: add eva image generation (thanks Axel Gembe)	2007-10-22 14:20:02 +00:00
.gitignore	add package/feeds to .gitignore	2007-10-13 02:05:06 +00:00
BSDmakefile	…
Config.in	add possibility to set default .config values	2007-10-14 02:15:37 +00:00
LICENSE	…
Makefile	add autorebuild check for menuconfig	2007-10-14 02:28:34 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
feeds.conf	add initial version of a package feeds management script	2007-09-23 02:39:01 +00:00
rules.mk	refreshed madwifi patches	2007-10-20 19:13:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org