wifipineapple-openwrt/target/linux/lantiq/dts/GR7000.dts

136 lines
2.1 KiB
Plaintext

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "GR7000 - Aztech GR7000";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "linux";
reg = <0x30000 0x7d0000>;
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio 54 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power2 {
label = "power2";
gpios = <&stp 4 0>;
};
internet {
label = "internet";
gpios = <&stp 2 1>;
default-state = "off";
};
internet2 {
label = "internet2";
gpios = <&stp 3 1>;
};
usb {
label = "usb";
gpios = <&stp 10 1>;
};
wifi {
label = "wifi";
gpios = <&stp 15 1>;
};
};
};