904 lines
20 KiB
C
904 lines
20 KiB
C
/*
|
|
* Marvell 88E61xx switch driver
|
|
*
|
|
* Copyright (c) 2014 Claudio Leite <leitec@staticky.com>
|
|
* Copyright (c) 2014 Nikita Nazarenko <nnazarenko@radiofid.com>
|
|
*
|
|
* Based on code (c) 2008 Felix Fietkau <nbd@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License v2 as published by the
|
|
* Free Software Foundation
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/switch.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "mvsw61xx.h"
|
|
|
|
MODULE_DESCRIPTION("Marvell 88E61xx Switch driver");
|
|
MODULE_AUTHOR("Claudio Leite <leitec@staticky.com>");
|
|
MODULE_AUTHOR("Nikita Nazarenko <nnazarenko@radiofid.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:mvsw61xx");
|
|
|
|
/*
|
|
* Register access is done through direct or indirect addressing,
|
|
* depending on how the switch is physically connected.
|
|
*
|
|
* Direct addressing: all port and global registers directly
|
|
* accessible via an address/register pair
|
|
*
|
|
* Indirect addressing: switch is mapped at a single address,
|
|
* port and global registers accessible via a single command/data
|
|
* register pair
|
|
*/
|
|
|
|
static int
|
|
mvsw61xx_wait_mask_raw(struct mii_bus *bus, int addr,
|
|
int reg, u16 mask, u16 val)
|
|
{
|
|
int i = 100;
|
|
u16 r;
|
|
|
|
do {
|
|
r = bus->read(bus, addr, reg);
|
|
if ((r & mask) == val)
|
|
return 0;
|
|
} while (--i > 0);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static u16
|
|
r16(struct mii_bus *bus, bool indirect, int base_addr, int addr, int reg)
|
|
{
|
|
u16 ind_addr;
|
|
|
|
if (!indirect)
|
|
return bus->read(bus, addr, reg);
|
|
|
|
/* Indirect read: First, make sure switch is free */
|
|
mvsw61xx_wait_mask_raw(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
MV_INDIRECT_INPROGRESS, 0);
|
|
|
|
/* Load address and request read */
|
|
ind_addr = MV_INDIRECT_READ | (addr << MV_INDIRECT_ADDR_S) | reg;
|
|
bus->write(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
ind_addr);
|
|
|
|
/* Wait until it's ready */
|
|
mvsw61xx_wait_mask_raw(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
MV_INDIRECT_INPROGRESS, 0);
|
|
|
|
/* Read the requested data */
|
|
return bus->read(bus, base_addr, MV_INDIRECT_REG_DATA);
|
|
}
|
|
|
|
static void
|
|
w16(struct mii_bus *bus, bool indirect, int base_addr, int addr,
|
|
int reg, u16 val)
|
|
{
|
|
u16 ind_addr;
|
|
|
|
if (!indirect) {
|
|
bus->write(bus, addr, reg, val);
|
|
return;
|
|
}
|
|
|
|
/* Indirect write: First, make sure switch is free */
|
|
mvsw61xx_wait_mask_raw(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
MV_INDIRECT_INPROGRESS, 0);
|
|
|
|
/* Load the data to be written */
|
|
bus->write(bus, base_addr, MV_INDIRECT_REG_DATA, val);
|
|
|
|
/* Wait again for switch to be free */
|
|
mvsw61xx_wait_mask_raw(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
MV_INDIRECT_INPROGRESS, 0);
|
|
|
|
/* Load address, and issue write command */
|
|
ind_addr = MV_INDIRECT_WRITE | (addr << MV_INDIRECT_ADDR_S) | reg;
|
|
bus->write(bus, base_addr, MV_INDIRECT_REG_CMD,
|
|
ind_addr);
|
|
}
|
|
|
|
/* swconfig support */
|
|
|
|
static inline u16
|
|
sr16(struct switch_dev *dev, int addr, int reg)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
return r16(state->bus, state->is_indirect, state->base_addr, addr, reg);
|
|
}
|
|
|
|
static inline void
|
|
sw16(struct switch_dev *dev, int addr, int reg, u16 val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
w16(state->bus, state->is_indirect, state->base_addr, addr, reg, val);
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_wait_mask_s(struct switch_dev *dev, int addr,
|
|
int reg, u16 mask, u16 val)
|
|
{
|
|
int i = 100;
|
|
u16 r;
|
|
|
|
do {
|
|
r = sr16(dev, addr, reg) & mask;
|
|
if (r == val)
|
|
return 0;
|
|
} while (--i > 0);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_get_port_mask(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
char *buf = state->buf;
|
|
int port, len, i;
|
|
u16 reg;
|
|
|
|
port = val->port_vlan;
|
|
reg = sr16(dev, MV_PORTREG(VLANMAP, port)) & MV_PORTS_MASK;
|
|
|
|
len = sprintf(buf, "0x%04x: ", reg);
|
|
|
|
for (i = 0; i < MV_PORTS; i++) {
|
|
if (reg & (1 << i))
|
|
len += sprintf(buf + len, "%d ", i);
|
|
else if (i == port)
|
|
len += sprintf(buf + len, "(%d) ", i);
|
|
}
|
|
|
|
val->value.s = buf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_get_port_qmode(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
val->value.i = state->ports[val->port_vlan].qmode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_set_port_qmode(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
state->ports[val->port_vlan].qmode = val->value.i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_get_pvid(struct switch_dev *dev, int port, int *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
*val = state->ports[port].pvid;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_set_pvid(struct switch_dev *dev, int port, int val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
if (val < 0 || val >= MV_VLANS)
|
|
return -EINVAL;
|
|
|
|
state->ports[port].pvid = (u16)val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_get_port_status(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
char *buf = state->buf;
|
|
u16 status, speed;
|
|
int len;
|
|
|
|
status = sr16(dev, MV_PORTREG(STATUS, val->port_vlan));
|
|
speed = (status & MV_PORT_STATUS_SPEED_MASK) >>
|
|
MV_PORT_STATUS_SPEED_SHIFT;
|
|
|
|
len = sprintf(buf, "link: ");
|
|
if (status & MV_PORT_STATUS_LINK) {
|
|
len += sprintf(buf + len, "up, speed: ");
|
|
|
|
switch (speed) {
|
|
case MV_PORT_STATUS_SPEED_10:
|
|
len += sprintf(buf + len, "10");
|
|
break;
|
|
case MV_PORT_STATUS_SPEED_100:
|
|
len += sprintf(buf + len, "100");
|
|
break;
|
|
case MV_PORT_STATUS_SPEED_1000:
|
|
len += sprintf(buf + len, "1000");
|
|
break;
|
|
}
|
|
|
|
len += sprintf(buf + len, " Mbps, duplex: ");
|
|
|
|
if (status & MV_PORT_STATUS_FDX)
|
|
len += sprintf(buf + len, "full");
|
|
else
|
|
len += sprintf(buf + len, "half");
|
|
} else {
|
|
len += sprintf(buf + len, "down");
|
|
}
|
|
|
|
val->value.s = buf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_get_port_speed(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
u16 status, speed;
|
|
|
|
status = sr16(dev, MV_PORTREG(STATUS, val->port_vlan));
|
|
speed = (status & MV_PORT_STATUS_SPEED_MASK) >>
|
|
MV_PORT_STATUS_SPEED_SHIFT;
|
|
|
|
val->value.i = 0;
|
|
|
|
if (status & MV_PORT_STATUS_LINK) {
|
|
switch (speed) {
|
|
case MV_PORT_STATUS_SPEED_10:
|
|
val->value.i = 10;
|
|
break;
|
|
case MV_PORT_STATUS_SPEED_100:
|
|
val->value.i = 100;
|
|
break;
|
|
case MV_PORT_STATUS_SPEED_1000:
|
|
val->value.i = 1000;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_get_vlan_ports(struct switch_dev *dev,
|
|
struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int i, j, mode, vno;
|
|
|
|
vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
for (i = 0, j = 0; i < dev->ports; i++) {
|
|
if (state->vlans[vno].mask & (1 << i)) {
|
|
val->value.ports[j].id = i;
|
|
|
|
mode = (state->vlans[vno].port_mode >> (i * 4)) & 0xf;
|
|
if (mode == MV_VTUCTL_EGRESS_TAGGED)
|
|
val->value.ports[j].flags =
|
|
(1 << SWITCH_PORT_FLAG_TAGGED);
|
|
else
|
|
val->value.ports[j].flags = 0;
|
|
|
|
j++;
|
|
}
|
|
}
|
|
|
|
val->len = j;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_set_vlan_ports(struct switch_dev *dev,
|
|
struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int i, mode, pno, vno;
|
|
|
|
vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
state->vlans[vno].mask = 0;
|
|
state->vlans[vno].port_mode = 0;
|
|
state->vlans[vno].port_sstate = 0;
|
|
|
|
if(state->vlans[vno].vid == 0)
|
|
state->vlans[vno].vid = vno;
|
|
|
|
for (i = 0; i < val->len; i++) {
|
|
pno = val->value.ports[i].id;
|
|
|
|
state->vlans[vno].mask |= (1 << pno);
|
|
if (val->value.ports[i].flags &
|
|
(1 << SWITCH_PORT_FLAG_TAGGED))
|
|
mode = MV_VTUCTL_EGRESS_TAGGED;
|
|
else
|
|
mode = MV_VTUCTL_EGRESS_UNTAGGED;
|
|
|
|
state->vlans[vno].port_mode |= mode << (pno * 4);
|
|
state->vlans[vno].port_sstate |=
|
|
MV_STUCTL_STATE_FORWARDING << (pno * 4 + 2);
|
|
}
|
|
|
|
/*
|
|
* DISCARD is nonzero, so it must be explicitly
|
|
* set on ports not in the VLAN.
|
|
*/
|
|
for (i = 0; i < dev->ports; i++)
|
|
if (!(state->vlans[vno].mask & (1 << i)))
|
|
state->vlans[vno].port_mode |=
|
|
MV_VTUCTL_DISCARD << (i * 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_get_vlan_port_based(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
if (state->vlans[vno].port_based)
|
|
val->value.i = 1;
|
|
else
|
|
val->value.i = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_set_vlan_port_based(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
if (val->value.i == 1)
|
|
state->vlans[vno].port_based = true;
|
|
else
|
|
state->vlans[vno].port_based = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_get_vid(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
val->value.i = state->vlans[vno].vid;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_set_vid(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int vno = val->port_vlan;
|
|
|
|
if (vno <= 0 || vno >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
state->vlans[vno].vid = val->value.i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_get_enable_vlan(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
val->value.i = state->vlan_enabled;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_set_enable_vlan(struct switch_dev *dev,
|
|
const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
|
|
state->vlan_enabled = val->value.i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_vtu_program(struct switch_dev *dev)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
u16 v1, v2, s1, s2;
|
|
int i;
|
|
|
|
/* Flush */
|
|
mvsw61xx_wait_mask_s(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS, 0);
|
|
sw16(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS | MV_VTUOP_PURGE);
|
|
|
|
/* Write VLAN table */
|
|
for (i = 1; i < dev->vlans; i++) {
|
|
if (state->vlans[i].mask == 0 ||
|
|
state->vlans[i].vid == 0 ||
|
|
state->vlans[i].port_based == true)
|
|
continue;
|
|
|
|
mvsw61xx_wait_mask_s(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS, 0);
|
|
|
|
/* Write per-VLAN port state into STU */
|
|
s1 = (u16) (state->vlans[i].port_sstate & 0xffff);
|
|
s2 = (u16) ((state->vlans[i].port_sstate >> 16) & 0xffff);
|
|
|
|
sw16(dev, MV_GLOBALREG(VTU_VID), MV_VTU_VID_VALID);
|
|
sw16(dev, MV_GLOBALREG(VTU_SID), i);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA1), s1);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA2), s2);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA3), 0);
|
|
|
|
sw16(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS | MV_VTUOP_STULOAD);
|
|
mvsw61xx_wait_mask_s(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS, 0);
|
|
|
|
/* Write VLAN information into VTU */
|
|
v1 = (u16) (state->vlans[i].port_mode & 0xffff);
|
|
v2 = (u16) ((state->vlans[i].port_mode >> 16) & 0xffff);
|
|
|
|
sw16(dev, MV_GLOBALREG(VTU_VID),
|
|
MV_VTU_VID_VALID | state->vlans[i].vid);
|
|
sw16(dev, MV_GLOBALREG(VTU_SID), i);
|
|
sw16(dev, MV_GLOBALREG(VTU_FID), 0);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA1), v1);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA2), v2);
|
|
sw16(dev, MV_GLOBALREG(VTU_DATA3), 0);
|
|
|
|
sw16(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS | MV_VTUOP_LOAD);
|
|
mvsw61xx_wait_mask_s(dev, MV_GLOBALREG(VTU_OP),
|
|
MV_VTUOP_INPROGRESS, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mvsw61xx_vlan_port_config(struct switch_dev *dev, int vno)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int i, mode;
|
|
|
|
for (i = 0; i < dev->ports; i++) {
|
|
if (!(state->vlans[vno].mask & (1 << i)))
|
|
continue;
|
|
|
|
mode = (state->vlans[vno].port_mode >> (i * 4)) & 0xf;
|
|
|
|
if(mode != MV_VTUCTL_EGRESS_TAGGED)
|
|
state->ports[i].pvid = state->vlans[vno].vid;
|
|
|
|
if (state->vlans[vno].port_based)
|
|
state->ports[i].mask |= state->vlans[vno].mask;
|
|
else
|
|
state->ports[i].qmode = MV_8021Q_MODE_SECURE;
|
|
}
|
|
}
|
|
|
|
static int mvsw61xx_update_state(struct switch_dev *dev)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int i;
|
|
u16 reg;
|
|
|
|
if (!state->registered)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Set 802.1q-only mode if vlan_enabled is true.
|
|
*
|
|
* Without this, even if 802.1q is enabled for
|
|
* a port/VLAN, it still depends on the port-based
|
|
* VLAN mask being set.
|
|
*
|
|
* With this setting, port-based VLANs are still
|
|
* functional, provided the VID is not in the VTU.
|
|
*/
|
|
reg = sr16(dev, MV_GLOBAL2REG(SDET_POLARITY));
|
|
|
|
if (state->vlan_enabled)
|
|
reg |= MV_8021Q_VLAN_ONLY;
|
|
else
|
|
reg &= ~MV_8021Q_VLAN_ONLY;
|
|
|
|
sw16(dev, MV_GLOBAL2REG(SDET_POLARITY), reg);
|
|
|
|
/*
|
|
* Set port-based VLAN masks on each port
|
|
* based only on VLAN definitions known to
|
|
* the driver (i.e. in state).
|
|
*
|
|
* This means any pre-existing port mapping is
|
|
* wiped out once our driver is initialized.
|
|
*/
|
|
for (i = 0; i < dev->ports; i++) {
|
|
state->ports[i].mask = 0;
|
|
state->ports[i].qmode = MV_8021Q_MODE_DISABLE;
|
|
}
|
|
|
|
for (i = 0; i < dev->vlans; i++)
|
|
mvsw61xx_vlan_port_config(dev, i);
|
|
|
|
for (i = 0; i < dev->ports; i++) {
|
|
reg = sr16(dev, MV_PORTREG(VLANID, i)) & ~MV_PVID_MASK;
|
|
reg |= state->ports[i].pvid;
|
|
sw16(dev, MV_PORTREG(VLANID, i), reg);
|
|
|
|
state->ports[i].mask &= ~(1 << i);
|
|
|
|
reg = sr16(dev, MV_PORTREG(VLANMAP, i)) & ~MV_PORTS_MASK;
|
|
reg |= state->ports[i].mask;
|
|
sw16(dev, MV_PORTREG(VLANMAP, i), reg);
|
|
|
|
reg = sr16(dev, MV_PORTREG(CONTROL2, i)) &
|
|
~MV_8021Q_MODE_MASK;
|
|
reg |= state->ports[i].qmode << MV_8021Q_MODE_SHIFT;
|
|
sw16(dev, MV_PORTREG(CONTROL2, i), reg);
|
|
}
|
|
|
|
mvsw61xx_vtu_program(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvsw61xx_apply(struct switch_dev *dev)
|
|
{
|
|
return mvsw61xx_update_state(dev);
|
|
}
|
|
|
|
static int mvsw61xx_reset(struct switch_dev *dev)
|
|
{
|
|
struct mvsw61xx_state *state = get_state(dev);
|
|
int i;
|
|
u16 reg;
|
|
|
|
/* Disable all ports before reset */
|
|
for (i = 0; i < dev->ports; i++) {
|
|
reg = sr16(dev, MV_PORTREG(CONTROL, i)) &
|
|
~MV_PORTCTRL_FORWARDING;
|
|
sw16(dev, MV_PORTREG(CONTROL, i), reg);
|
|
}
|
|
|
|
reg = sr16(dev, MV_GLOBALREG(CONTROL)) | MV_CONTROL_RESET;
|
|
|
|
sw16(dev, MV_GLOBALREG(CONTROL), reg);
|
|
if (mvsw61xx_wait_mask_s(dev, MV_GLOBALREG(CONTROL),
|
|
MV_CONTROL_RESET, 0) < 0)
|
|
return -ETIMEDOUT;
|
|
|
|
for (i = 0; i < dev->ports; i++) {
|
|
state->ports[i].qmode = 0;
|
|
state->ports[i].mask = 0;
|
|
state->ports[i].pvid = 0;
|
|
|
|
/* Force flow control off */
|
|
reg = sr16(dev, MV_PORTREG(PHYCTL, i)) & ~MV_PHYCTL_FC_MASK;
|
|
reg |= MV_PHYCTL_FC_DISABLE;
|
|
sw16(dev, MV_PORTREG(PHYCTL, i), reg);
|
|
|
|
/* Set port association vector */
|
|
sw16(dev, MV_PORTREG(ASSOC, i), (1 << i));
|
|
}
|
|
|
|
for (i = 0; i < dev->vlans; i++) {
|
|
state->vlans[i].port_based = false;
|
|
state->vlans[i].mask = 0;
|
|
state->vlans[i].vid = 0;
|
|
state->vlans[i].port_mode = 0;
|
|
state->vlans[i].port_sstate = 0;
|
|
}
|
|
|
|
state->vlan_enabled = 0;
|
|
|
|
mvsw61xx_update_state(dev);
|
|
|
|
/* Re-enable ports */
|
|
for (i = 0; i < dev->ports; i++) {
|
|
reg = sr16(dev, MV_PORTREG(CONTROL, i)) |
|
|
MV_PORTCTRL_FORWARDING;
|
|
sw16(dev, MV_PORTREG(CONTROL, i), reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum {
|
|
MVSW61XX_ENABLE_VLAN,
|
|
};
|
|
|
|
enum {
|
|
MVSW61XX_VLAN_PORT_BASED,
|
|
MVSW61XX_VLAN_ID,
|
|
};
|
|
|
|
enum {
|
|
MVSW61XX_PORT_MASK,
|
|
MVSW61XX_PORT_QMODE,
|
|
MVSW61XX_PORT_STATUS,
|
|
MVSW61XX_PORT_LINK,
|
|
};
|
|
|
|
static const struct switch_attr mvsw61xx_global[] = {
|
|
[MVSW61XX_ENABLE_VLAN] = {
|
|
.id = MVSW61XX_ENABLE_VLAN,
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_vlan",
|
|
.description = "Enable 802.1q VLAN support",
|
|
.get = mvsw61xx_get_enable_vlan,
|
|
.set = mvsw61xx_set_enable_vlan,
|
|
},
|
|
};
|
|
|
|
static const struct switch_attr mvsw61xx_vlan[] = {
|
|
[MVSW61XX_VLAN_PORT_BASED] = {
|
|
.id = MVSW61XX_VLAN_PORT_BASED,
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "port_based",
|
|
.description = "Use port-based (non-802.1q) VLAN only",
|
|
.get = mvsw61xx_get_vlan_port_based,
|
|
.set = mvsw61xx_set_vlan_port_based,
|
|
},
|
|
[MVSW61XX_VLAN_ID] = {
|
|
.id = MVSW61XX_VLAN_ID,
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "vid",
|
|
.description = "Get/set VLAN ID",
|
|
.get = mvsw61xx_get_vid,
|
|
.set = mvsw61xx_set_vid,
|
|
},
|
|
};
|
|
|
|
static const struct switch_attr mvsw61xx_port[] = {
|
|
[MVSW61XX_PORT_MASK] = {
|
|
.id = MVSW61XX_PORT_MASK,
|
|
.type = SWITCH_TYPE_STRING,
|
|
.description = "Port-based VLAN mask",
|
|
.name = "mask",
|
|
.get = mvsw61xx_get_port_mask,
|
|
.set = NULL,
|
|
},
|
|
[MVSW61XX_PORT_QMODE] = {
|
|
.id = MVSW61XX_PORT_QMODE,
|
|
.type = SWITCH_TYPE_INT,
|
|
.description = "802.1q mode: 0=off/1=fallback/2=check/3=secure",
|
|
.name = "qmode",
|
|
.get = mvsw61xx_get_port_qmode,
|
|
.set = mvsw61xx_set_port_qmode,
|
|
},
|
|
[MVSW61XX_PORT_STATUS] = {
|
|
.id = MVSW61XX_PORT_STATUS,
|
|
.type = SWITCH_TYPE_STRING,
|
|
.description = "Return port status",
|
|
.name = "status",
|
|
.get = mvsw61xx_get_port_status,
|
|
.set = NULL,
|
|
},
|
|
[MVSW61XX_PORT_LINK] = {
|
|
.id = MVSW61XX_PORT_LINK,
|
|
.type = SWITCH_TYPE_INT,
|
|
.description = "Get link speed",
|
|
.name = "link",
|
|
.get = mvsw61xx_get_port_speed,
|
|
.set = NULL,
|
|
},
|
|
};
|
|
|
|
static const struct switch_dev_ops mvsw61xx_ops = {
|
|
.attr_global = {
|
|
.attr = mvsw61xx_global,
|
|
.n_attr = ARRAY_SIZE(mvsw61xx_global),
|
|
},
|
|
.attr_vlan = {
|
|
.attr = mvsw61xx_vlan,
|
|
.n_attr = ARRAY_SIZE(mvsw61xx_vlan),
|
|
},
|
|
.attr_port = {
|
|
.attr = mvsw61xx_port,
|
|
.n_attr = ARRAY_SIZE(mvsw61xx_port),
|
|
},
|
|
.get_port_pvid = mvsw61xx_get_pvid,
|
|
.set_port_pvid = mvsw61xx_set_pvid,
|
|
.get_vlan_ports = mvsw61xx_get_vlan_ports,
|
|
.set_vlan_ports = mvsw61xx_set_vlan_ports,
|
|
.apply_config = mvsw61xx_apply,
|
|
.reset_switch = mvsw61xx_reset,
|
|
};
|
|
|
|
/* end swconfig stuff */
|
|
|
|
static int mvsw61xx_probe(struct platform_device *pdev)
|
|
{
|
|
struct mvsw61xx_state *state;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *mdio;
|
|
char *model_str;
|
|
u32 val;
|
|
int err;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
mdio = of_parse_phandle(np, "mii-bus", 0);
|
|
if (!mdio) {
|
|
dev_err(&pdev->dev, "Couldn't get MII bus handle\n");
|
|
err = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
state->bus = of_mdio_find_bus(mdio);
|
|
if (!state->bus) {
|
|
dev_err(&pdev->dev, "Couldn't find MII bus from handle\n");
|
|
err = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
state->is_indirect = of_property_read_bool(np, "is-indirect");
|
|
|
|
if (state->is_indirect) {
|
|
if (of_property_read_u32(np, "reg", &val)) {
|
|
dev_err(&pdev->dev, "Switch address not specified\n");
|
|
err = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
state->base_addr = val;
|
|
} else {
|
|
state->base_addr = MV_BASE;
|
|
}
|
|
|
|
state->model = r16(state->bus, state->is_indirect, state->base_addr,
|
|
MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
|
|
|
|
switch(state->model) {
|
|
case MV_IDENT_VALUE_6171:
|
|
model_str = MV_IDENT_STR_6171;
|
|
break;
|
|
case MV_IDENT_VALUE_6172:
|
|
model_str = MV_IDENT_STR_6172;
|
|
break;
|
|
case MV_IDENT_VALUE_6176:
|
|
model_str = MV_IDENT_STR_6176;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "No compatible switch found at 0x%02x\n",
|
|
state->base_addr);
|
|
err = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, state);
|
|
dev_info(&pdev->dev, "Found %s at %s:%02x\n", model_str,
|
|
state->bus->id, state->base_addr);
|
|
|
|
dev_info(&pdev->dev, "Using %sdirect addressing\n",
|
|
(state->is_indirect ? "in" : ""));
|
|
|
|
if (of_property_read_u32(np, "cpu-port-0", &val)) {
|
|
dev_err(&pdev->dev, "CPU port not set\n");
|
|
err = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
state->cpu_port0 = val;
|
|
|
|
if (!of_property_read_u32(np, "cpu-port-1", &val))
|
|
state->cpu_port1 = val;
|
|
else
|
|
state->cpu_port1 = -1;
|
|
|
|
state->dev.vlans = MV_VLANS;
|
|
state->dev.cpu_port = state->cpu_port0;
|
|
state->dev.ports = MV_PORTS;
|
|
state->dev.name = model_str;
|
|
state->dev.ops = &mvsw61xx_ops;
|
|
state->dev.alias = dev_name(&pdev->dev);
|
|
|
|
err = register_switch(&state->dev, NULL);
|
|
if (err < 0)
|
|
goto out_err;
|
|
|
|
state->registered = true;
|
|
|
|
return 0;
|
|
out_err:
|
|
kfree(state);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mvsw61xx_remove(struct platform_device *pdev)
|
|
{
|
|
struct mvsw61xx_state *state = platform_get_drvdata(pdev);
|
|
|
|
if (state->registered)
|
|
unregister_switch(&state->dev);
|
|
|
|
kfree(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mvsw61xx_match[] = {
|
|
{ .compatible = "marvell,88e6171" },
|
|
{ .compatible = "marvell,88e6172" },
|
|
{ .compatible = "marvell,88e6176" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mvsw61xx_match);
|
|
|
|
static struct platform_driver mvsw61xx_driver = {
|
|
.probe = mvsw61xx_probe,
|
|
.remove = mvsw61xx_remove,
|
|
.driver = {
|
|
.name = "mvsw61xx",
|
|
.of_match_table = of_match_ptr(mvsw61xx_match),
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init mvsw61xx_module_init(void)
|
|
{
|
|
return platform_driver_register(&mvsw61xx_driver);
|
|
}
|
|
late_initcall(mvsw61xx_module_init);
|
|
|
|
static void __exit mvsw61xx_module_exit(void)
|
|
{
|
|
platform_driver_unregister(&mvsw61xx_driver);
|
|
}
|
|
module_exit(mvsw61xx_module_exit);
|