201 lines
5.3 KiB
Diff
201 lines
5.3 KiB
Diff
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
|
|
@@ -0,0 +1,151 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/ap1000-setup.c
|
|
+ *
|
|
+ * Lanready AP-1000
|
|
+ *
|
|
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
|
|
+ *
|
|
+ * based on ixdp425-setup.c:
|
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/slab.h>
|
|
+
|
|
+#include <asm/types.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/memory.h>
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+static struct flash_platform_data ap1000_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource ap1000_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device ap1000_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &ap1000_flash_data,
|
|
+ },
|
|
+ .num_resources = 1,
|
|
+ .resource = &ap1000_flash_resource,
|
|
+};
|
|
+
|
|
+static struct resource ap1000_uart_resources[] = {
|
|
+ {
|
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ },
|
|
+ {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct plat_serial8250_port ap1000_uart_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART1,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device ap1000_uart = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev.platform_data = ap1000_uart_data,
|
|
+ .num_resources = 2,
|
|
+ .resource = ap1000_uart_resources
|
|
+};
|
|
+
|
|
+static struct platform_device *ap1000_devices[] __initdata = {
|
|
+ &ap1000_flash,
|
|
+ &ap1000_uart
|
|
+};
|
|
+
|
|
+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
|
|
+
|
|
+static void __init ap1000_fixup(struct machine_desc *desc,
|
|
+ struct tag *tags, char **cmdline, struct meminfo *mi)
|
|
+
|
|
+{
|
|
+ struct tag *t = tags;
|
|
+ char *p = *cmdline;
|
|
+
|
|
+ /* Find the end of the tags table, taking note of any cmdline tag. */
|
|
+ for (; t->hdr.size; t = tag_next(t)) {
|
|
+ if (t->hdr.tag == ATAG_CMDLINE) {
|
|
+ p = t->u.cmdline.cmdline;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* Overwrite the end of the table with a new cmdline tag. */
|
|
+ t->hdr.tag = ATAG_CMDLINE;
|
|
+ t->hdr.size = (sizeof (struct tag_header) +
|
|
+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
|
|
+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
|
|
+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
|
|
+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
|
|
+
|
|
+ /* Terminate the table. */
|
|
+ t = tag_next(t);
|
|
+ t->hdr.tag = ATAG_NONE;
|
|
+ t->hdr.size = 0;
|
|
+}
|
|
+
|
|
+static void __init ap1000_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ ap1000_flash_resource.end =
|
|
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
|
|
+
|
|
+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_MACH_AP1000
|
|
+MACHINE_START(AP1000, "Lanready AP-1000")
|
|
+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
|
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
+ .fixup = ap1000_fixup,
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .boot_params = 0x0100,
|
|
+ .init_machine = ap1000_init,
|
|
+MACHINE_END
|
|
+#endif
|
|
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
|
|
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
|
|
@@ -67,7 +67,7 @@ int __init ixdp425_pci_init(void)
|
|
{
|
|
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
|
|
machine_is_ixdp465() || machine_is_kixrp435() ||
|
|
- machine_is_compex())
|
|
+ machine_is_compex() || machine_is_ap1000())
|
|
pci_common_init(&ixdp425_pci);
|
|
return 0;
|
|
}
|
|
--- a/arch/arm/mach-ixp4xx/Kconfig
|
|
+++ b/arch/arm/mach-ixp4xx/Kconfig
|
|
@@ -105,6 +105,14 @@ config MACH_WRT300NV2
|
|
WRT300N v2 router. For more information on this
|
|
platform, see http://openwrt.org
|
|
|
|
+config MACH_AP1000
|
|
+ bool "Lanready AP-1000"
|
|
+ select PCI
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support Lanready's
|
|
+ AP1000 board. For more information on this
|
|
+ platform, see http://openwrt.org
|
|
+
|
|
config ARCH_IXDP425
|
|
bool "IXDP425"
|
|
help
|
|
--- a/arch/arm/mach-ixp4xx/Makefile
|
|
+++ b/arch/arm/mach-ixp4xx/Makefile
|
|
@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
|
|
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
|
|
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
|
|
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
|
|
+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
|
|
|
|
obj-y += common.o
|
|
|
|
@@ -40,6 +41,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
|
|
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
|
|
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
|
|
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
|
|
+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
|
|
|
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
|
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|