150 lines
4.6 KiB
Diff
150 lines
4.6 KiB
Diff
--- a/drivers/char/Makefile
|
|
+++ b/drivers/char/Makefile
|
|
@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
|
|
obj-$(CONFIG_JS_RTC) += js-rtc.o
|
|
js-rtc-y = rtc.o
|
|
|
|
+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
|
|
+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
|
|
+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
|
|
+
|
|
# Files generated that shall be removed upon make clean
|
|
clean-files := consolemap_deftbl.c defkeymap.c
|
|
|
|
--- a/drivers/mtd/maps/Makefile
|
|
+++ b/drivers/mtd/maps/Makefile
|
|
@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
|
|
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
|
|
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
|
|
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
|
|
+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
|
|
--- a/drivers/net/Kconfig
|
|
+++ b/drivers/net/Kconfig
|
|
@@ -351,6 +351,12 @@ config MACB
|
|
|
|
source "drivers/net/arm/Kconfig"
|
|
|
|
+config IFXMIPS_MII0
|
|
+ tristate "Infineon IFXMips eth0 driver"
|
|
+ depends on IFXMIPS
|
|
+ help
|
|
+ Support for the MII0 inside the IFXMips SOC
|
|
+
|
|
config AX88796
|
|
tristate "ASIX AX88796 NE2000 clone support"
|
|
depends on ARM || MIPS || SUPERH
|
|
--- a/drivers/serial/Kconfig
|
|
+++ b/drivers/serial/Kconfig
|
|
@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM
|
|
Currently, only 8250 compatible ports are supported, but
|
|
others can easily be added.
|
|
|
|
+config SERIAL_IFXMIPS
|
|
+ bool "IFXMips serial driver"
|
|
+ depends on IFXMIPS
|
|
+ select SERIAL_CORE
|
|
+ select SERIAL_CORE_CONSOLE
|
|
+ help
|
|
+ Driver for the ifxmipss built in ASC hardware
|
|
+
|
|
config SERIAL_QE
|
|
tristate "Freescale QUICC Engine serial port support"
|
|
depends on QUICC_ENGINE
|
|
--- a/drivers/serial/Makefile
|
|
+++ b/drivers/serial/Makefile
|
|
@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
|
|
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
|
|
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
|
|
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
|
|
+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
|
|
--- a/drivers/watchdog/Makefile
|
|
+++ b/drivers/watchdog/Makefile
|
|
@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
|
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
|
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
|
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
|
+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
|
|
|
|
# PARISC Architecture
|
|
|
|
--- a/drivers/net/Makefile
|
|
+++ b/drivers/net/Makefile
|
|
@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
|
|
obj-$(CONFIG_NIU) += niu.o
|
|
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
|
|
obj-$(CONFIG_SFC) += sfc/
|
|
-
|
|
+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
|
|
--- a/drivers/crypto/Kconfig
|
|
+++ b/drivers/crypto/Kconfig
|
|
@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
|
|
If you say N, all options in this submenu will be skipped and disabled.
|
|
|
|
if CRYPTO_HW
|
|
+config CRYPTO_DEV_IFXMIPS
|
|
+ tristate "Support for IFXMIPS Data Encryption Unit"
|
|
+ depends on IFXMIPS
|
|
|
|
config CRYPTO_DEV_PADLOCK
|
|
tristate "Support for VIA PadLock ACE"
|
|
--- a/drivers/crypto/Makefile
|
|
+++ b/drivers/crypto/Makefile
|
|
@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
|
|
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
|
|
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
|
|
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
|
|
+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
|
|
--- a/drivers/usb/host/Kconfig
|
|
+++ b/drivers/usb/host/Kconfig
|
|
@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
|
|
help
|
|
This driver enables support for the on-chip R8A66597 in the
|
|
SH7366 and SH7723 processors.
|
|
+
|
|
+config USB_DWC_HCD
|
|
+ tristate "IFXMIPS USB Host Controller Driver"
|
|
+ depends on USB && IFXMIPS
|
|
+ default y
|
|
+ help
|
|
+ Danube USB Host Controller
|
|
--- a/drivers/leds/Kconfig
|
|
+++ b/drivers/leds/Kconfig
|
|
@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called leds-clevo-mail.
|
|
|
|
+config LEDS_IFXMIPS
|
|
+ tristate "LED Support for IFXMIPS LEDs"
|
|
+ depends on LEDS_CLASS && IFXMIPS
|
|
+ help
|
|
+ This option enables support for the CM-X270 LEDs.
|
|
+
|
|
comment "LED Triggers"
|
|
|
|
config LEDS_TRIGGERS
|
|
--- a/drivers/leds/Makefile
|
|
+++ b/drivers/leds/Makefile
|
|
@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)
|
|
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
|
|
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
|
|
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
|
|
+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
|
|
|
|
# LED Triggers
|
|
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
|
|
--- a/drivers/watchdog/Kconfig
|
|
+++ b/drivers/watchdog/Kconfig
|
|
@@ -683,6 +683,12 @@ config TXX9_WDT
|
|
help
|
|
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
|
|
|
|
+config IFXMIPS_WDT
|
|
+ bool "IFXMips watchdog"
|
|
+ depends on IFXMIPS
|
|
+ help
|
|
+ Hardware driver for the IFXMIPS Watchdog Timer.
|
|
+
|
|
# PARISC Architecture
|
|
|
|
# POWERPC Architecture
|