wifipineapple-openwrt/target/linux/cns3xxx/patches-2.6.31/204-cns3xxx_mmc_support.patch

2664 lines
72 KiB
Diff

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -130,7 +130,7 @@ mmc_blk_getgeo(struct block_device *bdev
return 0;
}
-static struct block_device_operations mmc_bdops = {
+static const struct block_device_operations mmc_bdops = {
.open = mmc_blk_open,
.release = mmc_blk_release,
.getgeo = mmc_blk_getgeo,
@@ -392,13 +392,9 @@ static int mmc_blk_issue_rq(struct mmc_q
} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
(R1_CURRENT_STATE(cmd.resp[0]) == 7));
-#if 0
if (cmd.resp[0] & ~0x00000900)
printk(KERN_ERR "%s: status = %08x\n",
req->rq_disk->disk_name, cmd.resp[0]);
- if (mmc_decode_status(cmd.resp))
- goto cmd_err;
-#endif
}
if (brq.cmd.error || brq.stop.error || brq.data.error) {
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -37,6 +37,9 @@
#include "sd_ops.h"
#include "sdio_ops.h"
+/* scott.trace */
+//#define MMC_DEBUG
+
static struct workqueue_struct *workqueue;
/*
@@ -90,17 +93,30 @@ void mmc_request_done(struct mmc_host *h
cmd->error = 0;
host->ops->request(host, mrq);
} else {
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
led_trigger_event(host->led, LED_OFF);
+#endif
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
mmc_hostname(host), cmd->opcode, err,
cmd->resp[0], cmd->resp[1],
cmd->resp[2], cmd->resp[3]);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
+#endif
if (mrq->data) {
pr_debug("%s: %d bytes transferred: %d\n",
mmc_hostname(host),
mrq->data->bytes_xfered, mrq->data->error);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: %d bytes transferred: %d\n",
+ mmc_hostname(host),
+ mrq->data->bytes_xfered, mrq->data->error);
+#endif
}
if (mrq->stop) {
@@ -109,6 +125,13 @@ void mmc_request_done(struct mmc_host *h
mrq->stop->error,
mrq->stop->resp[0], mrq->stop->resp[1],
mrq->stop->resp[2], mrq->stop->resp[3]);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: (CMD%u): %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->error,
+ mrq->stop->resp[0], mrq->stop->resp[1],
+ mrq->stop->resp[2], mrq->stop->resp[3]);
+#endif
}
if (mrq->done)
@@ -129,6 +152,11 @@ mmc_start_request(struct mmc_host *host,
pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
mmc_hostname(host), mrq->cmd->opcode,
mrq->cmd->arg, mrq->cmd->flags);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: starting CMD%u arg %08x flags %08x\n",
+ mmc_hostname(host), mrq->cmd->opcode,
+ mrq->cmd->arg, mrq->cmd->flags);
+#endif
if (mrq->data) {
pr_debug("%s: blksz %d blocks %d flags %08x "
@@ -137,17 +165,32 @@ mmc_start_request(struct mmc_host *host,
mrq->data->blocks, mrq->data->flags,
mrq->data->timeout_ns / 1000000,
mrq->data->timeout_clks);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: blksz %d blocks %d flags %08x "
+ "tsac %d ms nsac %d\n",
+ mmc_hostname(host), mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
+#endif
}
if (mrq->stop) {
pr_debug("%s: CMD%u arg %08x flags %08x\n",
mmc_hostname(host), mrq->stop->opcode,
mrq->stop->arg, mrq->stop->flags);
+#ifdef MMC_DEBUG
+ printk("[MMC_DEBUG] %s: CMD%u arg %08x flags %08x\n",
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->arg, mrq->stop->flags);
+#endif
}
WARN_ON(!host->claimed);
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
led_trigger_event(host->led, LED_FULL);
+#endif
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
@@ -286,9 +329,9 @@ void mmc_set_data_timeout(struct mmc_dat
* The limit is really 250 ms, but that is
* insufficient for some crappy cards.
*/
- limit_us = 300000;
+ limit_us = 500000;
else
- limit_us = 100000;
+ limit_us = 200000;
/*
* SDHC cards always use these fixed values.
@@ -344,6 +387,101 @@ unsigned int mmc_align_data_size(struct
EXPORT_SYMBOL(mmc_align_data_size);
/**
+ * mmc_host_enable - enable a host.
+ * @host: mmc host to enable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_enable(struct mmc_host *host)
+{
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (host->nesting_cnt++)
+ return 0;
+
+ cancel_delayed_work_sync(&host->disable);
+
+ if (host->enabled)
+ return 0;
+
+ if (host->ops->enable) {
+ int err;
+
+ host->en_dis_recurs = 1;
+ err = host->ops->enable(host);
+ host->en_dis_recurs = 0;
+
+ if (err) {
+ pr_debug("%s: enable error %d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+ }
+ host->enabled = 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_host_enable);
+
+static int mmc_host_do_disable(struct mmc_host *host, int lazy)
+{
+ if (host->ops->disable) {
+ int err;
+
+ host->en_dis_recurs = 1;
+ err = host->ops->disable(host, lazy);
+ host->en_dis_recurs = 0;
+
+ if (err < 0) {
+ pr_debug("%s: disable error %d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+ if (err > 0) {
+ unsigned long delay = msecs_to_jiffies(err);
+
+ mmc_schedule_delayed_work(&host->disable, delay);
+ }
+ }
+ host->enabled = 0;
+ return 0;
+}
+
+/**
+ * mmc_host_disable - disable a host.
+ * @host: mmc host to disable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_disable(struct mmc_host *host)
+{
+ int err;
+
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (--host->nesting_cnt)
+ return 0;
+
+ if (!host->enabled)
+ return 0;
+
+ err = mmc_host_do_disable(host, 0);
+ return err;
+}
+EXPORT_SYMBOL(mmc_host_disable);
+
+/**
* __mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
* @abort: whether or not the operation should be aborted
@@ -366,25 +504,111 @@ int __mmc_claim_host(struct mmc_host *ho
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
stop = abort ? atomic_read(abort) : 0;
- if (stop || !host->claimed)
+ if (stop || !host->claimed || host->claimer == current)
break;
spin_unlock_irqrestore(&host->lock, flags);
schedule();
spin_lock_irqsave(&host->lock, flags);
}
set_current_state(TASK_RUNNING);
- if (!stop)
+ if (!stop) {
host->claimed = 1;
- else
+ host->claimer = current;
+ host->claim_cnt += 1;
+ } else
wake_up(&host->wq);
spin_unlock_irqrestore(&host->lock, flags);
remove_wait_queue(&host->wq, &wait);
+ if (!stop)
+ mmc_host_enable(host);
return stop;
}
EXPORT_SYMBOL(__mmc_claim_host);
/**
+ * mmc_try_claim_host - try exclusively to claim a host
+ * @host: mmc host to claim
+ *
+ * Returns %1 if the host is claimed, %0 otherwise.
+ */
+int mmc_try_claim_host(struct mmc_host *host)
+{
+ int claimed_host = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (!host->claimed || host->claimer == current) {
+ host->claimed = 1;
+ host->claimer = current;
+ host->claim_cnt += 1;
+ claimed_host = 1;
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ return claimed_host;
+}
+EXPORT_SYMBOL(mmc_try_claim_host);
+
+static void mmc_do_release_host(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (--host->claim_cnt) {
+ /* Release for nested claim */
+ spin_unlock_irqrestore(&host->lock, flags);
+ } else {
+ host->claimed = 0;
+ host->claimer = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+ wake_up(&host->wq);
+ }
+}
+
+void mmc_host_deeper_disable(struct work_struct *work)
+{
+ struct mmc_host *host =
+ container_of(work, struct mmc_host, disable.work);
+
+ /* If the host is claimed then we do not want to disable it anymore */
+ if (!mmc_try_claim_host(host))
+ return;
+ mmc_host_do_disable(host, 1);
+ mmc_do_release_host(host);
+}
+
+/**
+ * mmc_host_lazy_disable - lazily disable a host.
+ * @host: mmc host to disable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_lazy_disable(struct mmc_host *host)
+{
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (--host->nesting_cnt)
+ return 0;
+
+ if (!host->enabled)
+ return 0;
+
+ if (host->disable_delay) {
+ mmc_schedule_delayed_work(&host->disable,
+ msecs_to_jiffies(host->disable_delay));
+ return 0;
+ } else
+ return mmc_host_do_disable(host, 1);
+}
+EXPORT_SYMBOL(mmc_host_lazy_disable);
+
+/**
* mmc_release_host - release a host
* @host: mmc host to release
*
@@ -393,15 +617,11 @@ EXPORT_SYMBOL(__mmc_claim_host);
*/
void mmc_release_host(struct mmc_host *host)
{
- unsigned long flags;
-
WARN_ON(!host->claimed);
- spin_lock_irqsave(&host->lock, flags);
- host->claimed = 0;
- spin_unlock_irqrestore(&host->lock, flags);
+ mmc_host_lazy_disable(host);
- wake_up(&host->wq);
+ mmc_do_release_host(host);
}
EXPORT_SYMBOL(mmc_release_host);
@@ -687,7 +907,13 @@ void mmc_set_timing(struct mmc_host *hos
*/
static void mmc_power_up(struct mmc_host *host)
{
- int bit = fls(host->ocr_avail) - 1;
+ int bit;
+
+ /* If ocr is set, we use it */
+ if (host->ocr)
+ bit = ffs(host->ocr) - 1;
+ else
+ bit = fls(host->ocr_avail) - 1;
host->ios.vdd = bit;
if (mmc_host_is_spi(host)) {
@@ -947,6 +1173,8 @@ void mmc_stop_host(struct mmc_host *host
spin_unlock_irqrestore(&host->lock, flags);
#endif
+ if (host->caps & MMC_CAP_DISABLE)
+ cancel_delayed_work(&host->disable);
cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
@@ -958,6 +1186,8 @@ void mmc_stop_host(struct mmc_host *host
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_release_host(host);
+ mmc_bus_put(host);
+ return;
}
mmc_bus_put(host);
@@ -966,6 +1196,80 @@ void mmc_stop_host(struct mmc_host *host
mmc_power_off(host);
}
+void mmc_power_save_host(struct mmc_host *host)
+{
+ mmc_bus_get(host);
+
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ mmc_bus_put(host);
+ return;
+ }
+
+ if (host->bus_ops->power_save)
+ host->bus_ops->power_save(host);
+
+ mmc_bus_put(host);
+
+ mmc_power_off(host);
+}
+EXPORT_SYMBOL(mmc_power_save_host);
+
+void mmc_power_restore_host(struct mmc_host *host)
+{
+ mmc_bus_get(host);
+
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ mmc_bus_put(host);
+ return;
+ }
+
+ mmc_power_up(host);
+ host->bus_ops->power_restore(host);
+
+ mmc_bus_put(host);
+}
+EXPORT_SYMBOL(mmc_power_restore_host);
+
+int mmc_card_awake(struct mmc_host *host)
+{
+ int err = -ENOSYS;
+
+ mmc_bus_get(host);
+
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ err = host->bus_ops->awake(host);
+
+ mmc_bus_put(host);
+
+ return err;
+}
+EXPORT_SYMBOL(mmc_card_awake);
+
+int mmc_card_sleep(struct mmc_host *host)
+{
+ int err = -ENOSYS;
+
+ mmc_bus_get(host);
+
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ err = host->bus_ops->sleep(host);
+
+ mmc_bus_put(host);
+
+ return err;
+}
+EXPORT_SYMBOL(mmc_card_sleep);
+
+int mmc_card_can_sleep(struct mmc_host *host)
+{
+ struct mmc_card *card = host->card;
+
+ if (card && mmc_card_mmc(card) && card->ext_csd.rev >= 3)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_card_can_sleep);
+
#ifdef CONFIG_PM
/**
@@ -975,27 +1279,36 @@ void mmc_stop_host(struct mmc_host *host
*/
int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
{
+ int err = 0;
+
+ if (host->caps & MMC_CAP_DISABLE)
+ cancel_delayed_work(&host->disable);
cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->suspend)
- host->bus_ops->suspend(host);
- if (!host->bus_ops->resume) {
+ err = host->bus_ops->suspend(host);
+ if (err == -ENOSYS || !host->bus_ops->resume) {
+ /*
+ * We simply "remove" the card in this case.
+ * It will be redetected on resume.
+ */
if (host->bus_ops->remove)
host->bus_ops->remove(host);
-
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_release_host(host);
+ err = 0;
}
}
mmc_bus_put(host);
- mmc_power_off(host);
+ if (!err)
+ mmc_power_off(host);
- return 0;
+ return err;
}
EXPORT_SYMBOL(mmc_suspend_host);
@@ -1006,12 +1319,26 @@ EXPORT_SYMBOL(mmc_suspend_host);
*/
int mmc_resume_host(struct mmc_host *host)
{
+ int err = 0;
+
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
mmc_power_up(host);
mmc_select_voltage(host, host->ocr);
BUG_ON(!host->bus_ops->resume);
- host->bus_ops->resume(host);
+ err = host->bus_ops->resume(host);
+ if (err) {
+ printk(KERN_WARNING "%s: error %d during resume "
+ "(card was removed?)\n",
+ mmc_hostname(host), err);
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ /* no need to bother upper layers */
+ err = 0;
+ }
}
mmc_bus_put(host);
@@ -1021,7 +1348,7 @@ int mmc_resume_host(struct mmc_host *hos
*/
mmc_detect_change(host, 1);
- return 0;
+ return err;
}
EXPORT_SYMBOL(mmc_resume_host);
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -16,10 +16,14 @@
#define MMC_CMD_RETRIES 3
struct mmc_bus_ops {
+ int (*awake)(struct mmc_host *);
+ int (*sleep)(struct mmc_host *);
void (*remove)(struct mmc_host *);
void (*detect)(struct mmc_host *);
- void (*suspend)(struct mmc_host *);
- void (*resume)(struct mmc_host *);
+ int (*suspend)(struct mmc_host *);
+ int (*resume)(struct mmc_host *);
+ void (*power_save)(struct mmc_host *);
+ void (*power_restore)(struct mmc_host *);
};
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -240,7 +240,7 @@ static int mmc_ext_csd_release(struct in
return 0;
}
-static struct file_operations mmc_dbg_ext_csd_fops = {
+static const struct file_operations mmc_dbg_ext_csd_fops = {
.open = mmc_ext_csd_open,
.read = mmc_ext_csd_read,
.release = mmc_ext_csd_release,
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -83,6 +83,7 @@ struct mmc_host *mmc_alloc_host(int extr
spin_lock_init(&host->lock);
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
+ INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable);
/*
* By default, hosts do not support SGIO or large requests.
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -14,5 +14,7 @@
int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
+void mmc_host_deeper_disable(struct work_struct *work);
+
#endif
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -160,7 +160,6 @@ static int mmc_read_ext_csd(struct mmc_c
{
int err;
u8 *ext_csd;
- unsigned int ext_csd_struct;
BUG_ON(!card);
@@ -207,16 +206,16 @@ static int mmc_read_ext_csd(struct mmc_c
goto out;
}
- ext_csd_struct = ext_csd[EXT_CSD_REV];
- if (ext_csd_struct > 3) {
+ card->ext_csd.rev = ext_csd[EXT_CSD_REV];
+ if (card->ext_csd.rev > 3) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
- ext_csd_struct);
+ card->ext_csd.rev);
err = -EINVAL;
goto out;
}
- if (ext_csd_struct >= 2) {
+ if (card->ext_csd.rev >= 2) {
card->ext_csd.sectors =
ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
@@ -241,6 +240,15 @@ static int mmc_read_ext_csd(struct mmc_c
goto out;
}
+ if (card->ext_csd.rev >= 3) {
+ u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT];
+
+ /* Sleep / awake timeout in 100ns units */
+ if (sa_shift > 0 && sa_shift <= 0x17)
+ card->ext_csd.sa_timeout =
+ 1 << ext_csd[EXT_CSD_S_A_TIMEOUT];
+ }
+
out:
kfree(ext_csd);
@@ -276,7 +284,7 @@ static struct attribute_group mmc_std_at
.attrs = mmc_std_attrs,
};
-static struct attribute_group *mmc_attr_groups[] = {
+static const struct attribute_group *mmc_attr_groups[] = {
&mmc_std_attr_group,
NULL,
};
@@ -408,12 +416,17 @@ static int mmc_init_card(struct mmc_host
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1);
- if (err)
+ if (err && err != -EBADMSG)
goto free_card;
- mmc_card_set_highspeed(card);
-
- mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ if (err) {
+ printk(KERN_WARNING "%s: switch to highspeed failed\n",
+ mmc_hostname(card->host));
+ err = 0;
+ } else {
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ }
}
/*
@@ -448,10 +461,17 @@ static int mmc_init_card(struct mmc_host
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH, ext_csd_bit);
- if (err)
+ if (err && err != -EBADMSG)
goto free_card;
- mmc_set_bus_width(card->host, bus_width);
+ if (err) {
+ printk(KERN_WARNING "%s: switch to bus width %d "
+ "failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
+ err = 0;
+ } else {
+ mmc_set_bus_width(card->host, bus_width);
+ }
}
if (!oldcard)
@@ -507,12 +527,10 @@ static void mmc_detect(struct mmc_host *
}
}
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-
/*
* Suspend callback from host.
*/
-static void mmc_suspend(struct mmc_host *host)
+static int mmc_suspend(struct mmc_host *host)
{
BUG_ON(!host);
BUG_ON(!host->card);
@@ -522,6 +540,8 @@ static void mmc_suspend(struct mmc_host
mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
+
+ return 0;
}
/*
@@ -530,7 +550,7 @@ static void mmc_suspend(struct mmc_host
* This function tries to determine if the same card is still present
* and, if so, restore all state to it.
*/
-static void mmc_resume(struct mmc_host *host)
+static int mmc_resume(struct mmc_host *host)
{
int err;
@@ -541,30 +561,99 @@ static void mmc_resume(struct mmc_host *
err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
- if (err) {
- mmc_remove(host);
+ return err;
+}
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
+static void mmc_power_restore(struct mmc_host *host)
+{
+ host->card->state &= ~MMC_STATE_HIGHSPEED;
+ mmc_claim_host(host);
+ mmc_init_card(host, host->ocr, host->card);
+ mmc_release_host(host);
+}
+
+static int mmc_sleep(struct mmc_host *host)
+{
+ struct mmc_card *card = host->card;
+ int err = -ENOSYS;
+
+ if (card && card->ext_csd.rev >= 3) {
+ err = mmc_card_sleepawake(host, 1);
+ if (err < 0)
+ pr_debug("%s: Error %d while putting card into sleep",
+ mmc_hostname(host), err);
}
+ return err;
}
-#else
+static int mmc_awake(struct mmc_host *host)
+{
+ struct mmc_card *card = host->card;
+ int err = -ENOSYS;
-#define mmc_suspend NULL
-#define mmc_resume NULL
+ if (card && card->ext_csd.rev >= 3) {
+ err = mmc_card_sleepawake(host, 0);
+ if (err < 0)
+ pr_debug("%s: Error %d while awaking sleeping card",
+ mmc_hostname(host), err);
+ }
-#endif
+ return err;
+}
+
+#ifdef CONFIG_MMC_UNSAFE_RESUME
+
+static const struct mmc_bus_ops mmc_ops = {
+ .awake = mmc_awake,
+ .sleep = mmc_sleep,
+ .remove = mmc_remove,
+ .detect = mmc_detect,
+ .suspend = mmc_suspend,
+ .resume = mmc_resume,
+ .power_restore = mmc_power_restore,
+};
+
+static void mmc_attach_bus_ops(struct mmc_host *host)
+{
+ mmc_attach_bus(host, &mmc_ops);
+}
+
+#else
static const struct mmc_bus_ops mmc_ops = {
+ .awake = mmc_awake,
+ .sleep = mmc_sleep,
+ .remove = mmc_remove,
+ .detect = mmc_detect,
+ .suspend = NULL,
+ .resume = NULL,
+ .power_restore = mmc_power_restore,
+};
+
+static const struct mmc_bus_ops mmc_ops_unsafe = {
+ .awake = mmc_awake,
+ .sleep = mmc_sleep,
.remove = mmc_remove,
.detect = mmc_detect,
.suspend = mmc_suspend,
.resume = mmc_resume,
+ .power_restore = mmc_power_restore,
};
+static void mmc_attach_bus_ops(struct mmc_host *host)
+{
+ const struct mmc_bus_ops *bus_ops;
+
+ if (host->caps & MMC_CAP_NONREMOVABLE)
+ bus_ops = &mmc_ops_unsafe;
+ else
+ bus_ops = &mmc_ops;
+ mmc_attach_bus(host, bus_ops);
+}
+
+#endif
+
/*
* Starting point for MMC card init.
*/
@@ -575,7 +664,7 @@ int mmc_attach_mmc(struct mmc_host *host
BUG_ON(!host);
WARN_ON(!host->claimed);
- mmc_attach_bus(host, &mmc_ops);
+ mmc_attach_bus_ops(host);
/*
* We need to get OCR a different way for SPI.
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -57,6 +57,42 @@ int mmc_deselect_cards(struct mmc_host *
return _mmc_select_card(host, NULL);
}
+int mmc_card_sleepawake(struct mmc_host *host, int sleep)
+{
+ struct mmc_command cmd;
+ struct mmc_card *card = host->card;
+ int err;
+
+ if (sleep)
+ mmc_deselect_cards(host);
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SLEEP_AWAKE;
+ cmd.arg = card->rca << 16;
+ if (sleep)
+ cmd.arg |= 1 << 15;
+
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err)
+ return err;
+
+ /*
+ * If the host does not wait while the card signals busy, then we will
+ * will have to wait the sleep/awake timeout. Note, we cannot use the
+ * SEND_STATUS command to poll the status because that command (and most
+ * others) is invalid while the card sleeps.
+ */
+ if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
+ mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
+
+ if (!sleep)
+ err = mmc_select_card(card);
+
+ return err;
+}
+
int mmc_go_idle(struct mmc_host *host)
{
int err;
@@ -354,6 +390,7 @@ int mmc_switch(struct mmc_card *card, u8
{
int err;
struct mmc_command cmd;
+ u32 status;
BUG_ON(!card);
BUG_ON(!card->host);
@@ -371,6 +408,28 @@ int mmc_switch(struct mmc_card *card, u8
if (err)
return err;
+ /* Must check status to be sure of no errors */
+ do {
+ err = mmc_send_status(card, &status);
+ if (err)
+ return err;
+ if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ break;
+ if (mmc_host_is_spi(card->host))
+ break;
+ } while (R1_CURRENT_STATE(status) == 7);
+
+ if (mmc_host_is_spi(card->host)) {
+ if (status & R1_SPI_ILLEGAL_COMMAND)
+ return -EBADMSG;
+ } else {
+ if (status & 0xFDFFA000)
+ printk(KERN_WARNING "%s: unexpected status %#x after "
+ "switch", mmc_hostname(card->host), status);
+ if (status & R1_SWITCH_ERROR)
+ return -EBADMSG;
+ }
+
return 0;
}
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -25,6 +25,7 @@ int mmc_send_status(struct mmc_card *car
int mmc_send_cid(struct mmc_host *host, u32 *cid);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
+int mmc_card_sleepawake(struct mmc_host *host, int sleep);
#endif
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -314,7 +314,7 @@ static struct attribute_group sd_std_att
.attrs = sd_std_attrs,
};
-static struct attribute_group *sd_attr_groups[] = {
+static const struct attribute_group *sd_attr_groups[] = {
&sd_std_attr_group,
NULL,
};
@@ -561,12 +561,10 @@ static void mmc_sd_detect(struct mmc_hos
}
}
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-
/*
* Suspend callback from host.
*/
-static void mmc_sd_suspend(struct mmc_host *host)
+static int mmc_sd_suspend(struct mmc_host *host)
{
BUG_ON(!host);
BUG_ON(!host->card);
@@ -576,6 +574,8 @@ static void mmc_sd_suspend(struct mmc_ho
mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
+
+ return 0;
}
/*
@@ -584,7 +584,7 @@ static void mmc_sd_suspend(struct mmc_ho
* This function tries to determine if the same card is still present
* and, if so, restore all state to it.
*/
-static void mmc_sd_resume(struct mmc_host *host)
+static int mmc_sd_resume(struct mmc_host *host)
{
int err;
@@ -595,30 +595,63 @@ static void mmc_sd_resume(struct mmc_hos
err = mmc_sd_init_card(host, host->ocr, host->card);
mmc_release_host(host);
- if (err) {
- mmc_sd_remove(host);
-
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
- }
+ return err;
+}
+static void mmc_sd_power_restore(struct mmc_host *host)
+{
+ host->card->state &= ~MMC_STATE_HIGHSPEED;
+ mmc_claim_host(host);
+ mmc_sd_init_card(host, host->ocr, host->card);
+ mmc_release_host(host);
}
-#else
+#ifdef CONFIG_MMC_UNSAFE_RESUME
-#define mmc_sd_suspend NULL
-#define mmc_sd_resume NULL
+static const struct mmc_bus_ops mmc_sd_ops = {
+ .remove = mmc_sd_remove,
+ .detect = mmc_sd_detect,
+ .suspend = mmc_sd_suspend,
+ .resume = mmc_sd_resume,
+ .power_restore = mmc_sd_power_restore,
+};
-#endif
+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
+{
+ mmc_attach_bus(host, &mmc_sd_ops);
+}
+
+#else
static const struct mmc_bus_ops mmc_sd_ops = {
.remove = mmc_sd_remove,
.detect = mmc_sd_detect,
+ .suspend = NULL,
+ .resume = NULL,
+ .power_restore = mmc_sd_power_restore,
+};
+
+static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
+ .remove = mmc_sd_remove,
+ .detect = mmc_sd_detect,
.suspend = mmc_sd_suspend,
.resume = mmc_sd_resume,
+ .power_restore = mmc_sd_power_restore,
};
+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
+{
+ const struct mmc_bus_ops *bus_ops;
+
+ if (host->caps & MMC_CAP_NONREMOVABLE)
+ bus_ops = &mmc_sd_ops_unsafe;
+ else
+ bus_ops = &mmc_sd_ops;
+ mmc_attach_bus(host, bus_ops);
+}
+
+#endif
+
/*
* Starting point for SD card init.
*/
@@ -629,7 +662,7 @@ int mmc_attach_sd(struct mmc_host *host,
BUG_ON(!host);
WARN_ON(!host->claimed);
- mmc_attach_bus(host, &mmc_sd_ops);
+ mmc_sd_attach_bus_ops(host);
/*
* We need to get OCR a different way for SPI.
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -20,9 +20,6 @@
#include "sdio_cis.h"
#include "sdio_bus.h"
-#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
-#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
-
/* show configuration fields */
#define sdio_config_attr(field, format_string) \
static ssize_t \
@@ -251,12 +248,15 @@ int sdio_add_func(struct sdio_func *func
/*
* Unregister a SDIO function with the driver model, and
* (eventually) free it.
+ * This function can be called through error paths where sdio_add_func() was
+ * never executed (because a failure occurred at an earlier point).
*/
void sdio_remove_func(struct sdio_func *func)
{
- if (sdio_func_present(func))
- device_del(&func->dev);
+ if (!sdio_func_present(func))
+ return;
+ device_del(&func->dev);
put_device(&func->dev);
}
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -165,6 +165,29 @@ static int sdio_enable_wide(struct mmc_c
}
/*
+ * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
+ * of the card. This may be required on certain setups of boards,
+ * controllers and embedded sdio device which do not need the card's
+ * pull-up. As a result, card detection is disabled and power is saved.
+ */
+static int sdio_disable_cd(struct mmc_card *card)
+{
+ int ret;
+ u8 ctrl;
+
+ if (!card->cccr.disable_cd)
+ return 0;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
+ if (ret)
+ return ret;
+
+ ctrl |= SDIO_BUS_CD_DISABLE;
+
+ return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
+}
+
+/*
* Test if the card supports high-speed mode and, if so, switch to it.
*/
static int sdio_enable_hs(struct mmc_card *card)
@@ -195,6 +218,135 @@ static int sdio_enable_hs(struct mmc_car
}
/*
+ * Handle the detection and initialisation of a card.
+ *
+ * In the case of a resume, "oldcard" will contain the card
+ * we're trying to reinitialise.
+ */
+static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
+ struct mmc_card *oldcard)
+{
+ struct mmc_card *card;
+ int err;
+
+ BUG_ON(!host);
+ WARN_ON(!host->claimed);
+
+ /*
+ * Inform the card of the voltage
+ */
+ err = mmc_send_io_op_cond(host, host->ocr, &ocr);
+ if (err)
+ goto err;
+
+ /*
+ * For SPI, enable CRC as appropriate.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto err;
+ }
+
+ /*
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host, NULL);
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto err;
+ }
+
+ card->type = MMC_TYPE_SDIO;
+
+ /*
+ * For native busses: set card RCA and quit open drain mode.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_send_relative_addr(host, &card->rca);
+ if (err)
+ goto remove;
+
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
+
+ /*
+ * Select card, as all following commands rely on that.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ goto remove;
+ }
+
+ /*
+ * Read the common registers.
+ */
+ err = sdio_read_cccr(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Read the common CIS tuples.
+ */
+ err = sdio_read_common_cis(card);
+ if (err)
+ goto remove;
+
+ if (oldcard) {
+ int same = (card->cis.vendor == oldcard->cis.vendor &&
+ card->cis.device == oldcard->cis.device);
+ mmc_remove_card(card);
+ if (!same) {
+ err = -ENOENT;
+ goto err;
+ }
+ card = oldcard;
+ return 0;
+ }
+
+ /*
+ * Switch to high-speed (if supported).
+ */
+ err = sdio_enable_hs(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Change to the card's maximum speed.
+ */
+ if (mmc_card_highspeed(card)) {
+ /*
+ * The SDIO specification doesn't mention how
+ * the CIS transfer speed register relates to
+ * high-speed, but it seems that 50 MHz is
+ * mandatory.
+ */
+ mmc_set_clock(host, 50000000);
+ } else {
+ mmc_set_clock(host, card->cis.max_dtr);
+ }
+
+ /*
+ * Switch to wider bus (if supported).
+ */
+ err = sdio_enable_wide(card);
+ if (err)
+ goto remove;
+
+ if (!oldcard)
+ host->card = card;
+ return 0;
+
+remove:
+ if (!oldcard)
+ mmc_remove_card(card);
+
+err:
+ return err;
+}
+
+/*
* Host is being removed. Free up the current card.
*/
static void mmc_sdio_remove(struct mmc_host *host)
@@ -243,10 +395,77 @@ static void mmc_sdio_detect(struct mmc_h
}
}
+/*
+ * SDIO suspend. We need to suspend all functions separately.
+ * Therefore all registered functions must have drivers with suspend
+ * and resume methods. Failing that we simply remove the whole card.
+ */
+static int mmc_sdio_suspend(struct mmc_host *host)
+{
+ int i, err = 0;
+
+ for (i = 0; i < host->card->sdio_funcs; i++) {
+ struct sdio_func *func = host->card->sdio_func[i];
+ if (func && sdio_func_present(func) && func->dev.driver) {
+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
+ if (!pmops || !pmops->suspend || !pmops->resume) {
+ /* force removal of entire card in that case */
+ err = -ENOSYS;
+ } else
+ err = pmops->suspend(&func->dev);
+ if (err)
+ break;
+ }
+ }
+ while (err && --i >= 0) {
+ struct sdio_func *func = host->card->sdio_func[i];
+ if (func && sdio_func_present(func) && func->dev.driver) {
+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
+ pmops->resume(&func->dev);
+ }
+ }
+
+ return err;
+}
+
+static int mmc_sdio_resume(struct mmc_host *host)
+{
+ int i, err;
+
+ BUG_ON(!host);
+ BUG_ON(!host->card);
+
+ /* Basic card reinitialization. */
+ mmc_claim_host(host);
+ err = mmc_sdio_init_card(host, host->ocr, host->card);
+ mmc_release_host(host);
+
+ /*
+ * If the card looked to be the same as before suspending, then
+ * we proceed to resume all card functions. If one of them returns
+ * an error then we simply return that error to the core and the
+ * card will be redetected as new. It is the responsibility of
+ * the function driver to perform further tests with the extra
+ * knowledge it has of the card to confirm the card is indeed the
+ * same as before suspending (same MAC address for network cards,
+ * etc.) and return an error otherwise.
+ */
+ for (i = 0; !err && i < host->card->sdio_funcs; i++) {
+ struct sdio_func *func = host->card->sdio_func[i];
+ if (func && sdio_func_present(func) && func->dev.driver) {
+ const struct dev_pm_ops *pmops = func->dev.driver->pm;
+ err = pmops->resume(&func->dev);
+ }
+ }
+
+ return err;
+}
static const struct mmc_bus_ops mmc_sdio_ops = {
.remove = mmc_sdio_remove,
.detect = mmc_sdio_detect,
+ .suspend = mmc_sdio_suspend,
+ .resume = mmc_sdio_resume,
};
@@ -275,13 +494,6 @@ int mmc_attach_sdio(struct mmc_host *hos
ocr &= ~0x7F;
}
- if (ocr & MMC_VDD_165_195) {
- printk(KERN_WARNING "%s: SDIO card claims to support the "
- "incompletely defined 'low voltage range'. This "
- "will be ignored.\n", mmc_hostname(host));
- ocr &= ~MMC_VDD_165_195;
- }
-
host->ocr = mmc_select_voltage(host, ocr);
/*
@@ -293,108 +505,31 @@ int mmc_attach_sdio(struct mmc_host *hos
}
/*
- * Inform the card of the voltage
+ * Detect and init the card.
*/
- err = mmc_send_io_op_cond(host, host->ocr, &ocr);
+ err = mmc_sdio_init_card(host, host->ocr, NULL);
if (err)
goto err;
-
- /*
- * For SPI, enable CRC as appropriate.
- */
- if (mmc_host_is_spi(host)) {
- err = mmc_spi_set_crc(host, use_spi_crc);
- if (err)
- goto err;
- }
+ card = host->card;
/*
* The number of functions on the card is encoded inside
* the ocr.
*/
funcs = (ocr & 0x70000000) >> 28;
+ card->sdio_funcs = 0;
/*
- * Allocate card structure.
- */
- card = mmc_alloc_card(host, NULL);
- if (IS_ERR(card)) {
- err = PTR_ERR(card);
- goto err;
- }
-
- card->type = MMC_TYPE_SDIO;
- card->sdio_funcs = funcs;
-
- host->card = card;
-
- /*
- * For native busses: set card RCA and quit open drain mode.
+ * If needed, disconnect card detection pull-up resistor.
*/
- if (!mmc_host_is_spi(host)) {
- err = mmc_send_relative_addr(host, &card->rca);
- if (err)
- goto remove;
-
- mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
- }
-
- /*
- * Select card, as all following commands rely on that.
- */
- if (!mmc_host_is_spi(host)) {
- err = mmc_select_card(card);
- if (err)
- goto remove;
- }
-
- /*
- * Read the common registers.
- */
- err = sdio_read_cccr(card);
- if (err)
- goto remove;
-
- /*
- * Read the common CIS tuples.
- */
- err = sdio_read_common_cis(card);
- if (err)
- goto remove;
-
- /*
- * Switch to high-speed (if supported).
- */
- err = sdio_enable_hs(card);
- if (err)
- goto remove;
-
- /*
- * Change to the card's maximum speed.
- */
- if (mmc_card_highspeed(card)) {
- /*
- * The SDIO specification doesn't mention how
- * the CIS transfer speed register relates to
- * high-speed, but it seems that 50 MHz is
- * mandatory.
- */
- mmc_set_clock(host, 50000000);
- } else {
- mmc_set_clock(host, card->cis.max_dtr);
- }
-
- /*
- * Switch to wider bus (if supported).
- */
- err = sdio_enable_wide(card);
+ err = sdio_disable_cd(card);
if (err)
goto remove;
/*
* Initialize (but don't add) all present functions.
*/
- for (i = 0;i < funcs;i++) {
+ for (i = 0; i < funcs; i++, card->sdio_funcs++) {
err = sdio_init_func(host->card, i + 1);
if (err)
goto remove;
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -29,6 +29,8 @@ static int cistpl_vers_1(struct mmc_card
unsigned i, nr_strings;
char **buffer, *string;
+ /* Find all null-terminated (including zero length) strings in
+ the TPLLV1_INFO field. Trailing garbage is ignored. */
buf += 2;
size -= 2;
@@ -39,11 +41,8 @@ static int cistpl_vers_1(struct mmc_card
if (buf[i] == 0)
nr_strings++;
}
-
- if (buf[i-1] != '\0') {
- printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
+ if (nr_strings == 0)
return 0;
- }
size = i;
@@ -98,6 +97,22 @@ static const unsigned char speed_val[16]
static const unsigned int speed_unit[8] =
{ 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
+/* FUNCE tuples with these types get passed to SDIO drivers */
+static const unsigned char funce_type_whitelist[] = {
+ 4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */
+};
+
+static int cistpl_funce_whitelisted(unsigned char type)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) {
+ if (funce_type_whitelist[i] == type)
+ return 1;
+ }
+ return 0;
+}
+
static int cistpl_funce_common(struct mmc_card *card,
const unsigned char *buf, unsigned size)
{
@@ -120,6 +135,10 @@ static int cistpl_funce_func(struct sdio
unsigned vsn;
unsigned min_size;
+ /* let SDIO drivers take care of whitelisted FUNCE tuples */
+ if (cistpl_funce_whitelisted(buf[0]))
+ return -EILSEQ;
+
vsn = func->card->cccr.sdio_vsn;
min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
@@ -154,13 +173,12 @@ static int cistpl_funce(struct mmc_card
else
ret = cistpl_funce_common(card, buf, size);
- if (ret) {
+ if (ret && ret != -EILSEQ) {
printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
"type %u\n", mmc_hostname(card->host), size, buf[0]);
- return ret;
}
- return 0;
+ return ret;
}
typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
@@ -253,21 +271,12 @@ static int sdio_read_cis(struct mmc_card
for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
if (cis_tpl_list[i].code == tpl_code)
break;
- if (i >= ARRAY_SIZE(cis_tpl_list)) {
- /* this tuple is unknown to the core */
- this->next = NULL;
- this->code = tpl_code;
- this->size = tpl_link;
- *prev = this;
- prev = &this->next;
- printk(KERN_DEBUG
- "%s: queuing CIS tuple 0x%02x length %u\n",
- mmc_hostname(card->host), tpl_code, tpl_link);
- } else {
+ if (i < ARRAY_SIZE(cis_tpl_list)) {
const struct cis_tpl *tpl = cis_tpl_list + i;
if (tpl_link < tpl->min_size) {
printk(KERN_ERR
- "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
+ "%s: bad CIS tuple 0x%02x"
+ " (length = %u, expected >= %u)\n",
mmc_hostname(card->host),
tpl_code, tpl_link, tpl->min_size);
ret = -EINVAL;
@@ -275,7 +284,30 @@ static int sdio_read_cis(struct mmc_card
ret = tpl->parse(card, func,
this->data, tpl_link);
}
- kfree(this);
+ /*
+ * We don't need the tuple anymore if it was
+ * successfully parsed by the SDIO core or if it is
+ * not going to be parsed by SDIO drivers.
+ */
+ if (!ret || ret != -EILSEQ)
+ kfree(this);
+ } else {
+ /* unknown tuple */
+ ret = -EILSEQ;
+ }
+
+ if (ret == -EILSEQ) {
+ /* this tuple is unknown to the core or whitelisted */
+ this->next = NULL;
+ this->code = tpl_code;
+ this->size = tpl_link;
+ *prev = this;
+ prev = &this->next;
+ printk(KERN_DEBUG
+ "%s: queuing CIS tuple 0x%02x length %u\n",
+ mmc_hostname(card->host), tpl_code, tpl_link);
+ /* keep on analyzing tuples */
+ ret = 0;
}
ptr += tpl_link;
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -624,7 +624,7 @@ void sdio_f0_writeb(struct sdio_func *fu
BUG_ON(!func);
- if (addr < 0xF0 || addr > 0xFF) {
+ if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) {
if (err_ret)
*err_ret = -EINVAL;
return;
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -55,6 +55,17 @@ config MMC_SDHCI_PCI
If unsure, say N.
+config MMC_SDHCI_CNS3XXX
+ tristate "SDHCI support on CNS3XXX"
+ depends on MMC_SDHCI && ARCH_CNS3XXX
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ in Cavium Networks CNS3XXX SOCs.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_RICOH_MMC
tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
depends on MMC_SDHCI_PCI
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
+obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -27,6 +27,15 @@
#define DRIVER_NAME "sdhci"
+#define SDHCI_DEBUG
+#undef SDHCI_DEBUG
+
+#ifdef SDHCI_DEBUG
+#define sd_printk(x...) printk(x)
+#else
+#define sd_printk(x...) do { } while(0)
+#endif
+
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
@@ -43,6 +52,39 @@ static void sdhci_finish_data(struct sdh
static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
static void sdhci_finish_command(struct sdhci_host *);
+static void sdhci_dumpallregs(struct sdhci_host *host)
+{
+#ifdef SDHCI_DEBUG
+ printk(" _______________________________________________\n");
+
+ printk(" 0x00: 0x%08x | 0x04: 0x%08x\n", sdhci_readl(host, 0x00), sdhci_readl(host, 0x04));
+ printk(" 0x08: 0x%08x | 0x0C: 0x%08x\n", sdhci_readl(host, 0x08), sdhci_readl(host, 0x0C));
+ printk(" 0x10: 0x%08x | 0x14: 0x%08x\n", sdhci_readl(host, 0x10), sdhci_readl(host, 0x14));
+ printk(" 0x18: 0x%08x | 0x1C: 0x%08x\n", sdhci_readl(host, 0x18), sdhci_readl(host, 0x1C));
+ printk(" -----------------| 0x24: 0x%08x\n", sdhci_readl(host, 0x24));
+ printk(" 0x28: 0x%08x | 0x2C: 0x%08x\n", sdhci_readl(host, 0x28), sdhci_readl(host, 0x2C));
+ printk(" 0x30: 0x%08x | 0x34: 0x%08x\n", sdhci_readl(host, 0x30), sdhci_readl(host, 0x34));
+ printk(" 0x38: 0x%08x | 0x3C: 0x%08x\n", sdhci_readl(host, 0x38), sdhci_readl(host, 0x3C));
+ printk(" 0x40: 0x%08x | 0x44: 0x%08x\n", sdhci_readl(host, 0x40), sdhci_readl(host, 0x44));
+ printk(" 0x48: 0x%08x | 0x4C: 0x%08x\n", sdhci_readl(host, 0x48), sdhci_readl(host, 0x4C));
+ printk(" 0x50: 0x%08x | 0xFC: 0x%08x\n", sdhci_readl(host, 0x50), sdhci_readl(host, 0xFC));
+//#else
+ printk(KERN_DEBUG " _______________________________________________\n");
+
+ printk(KERN_DEBUG " 0x00: 0x%08x | 0x04: 0x%08x\n", sdhci_readl(host, 0x00), sdhci_readl(host, 0x04));
+ printk(KERN_DEBUG " 0x08: 0x%08x | 0x0C: 0x%08x\n", sdhci_readl(host, 0x08), sdhci_readl(host, 0x0C));
+ printk(KERN_DEBUG " 0x10: 0x%08x | 0x14: 0x%08x\n", sdhci_readl(host, 0x10), sdhci_readl(host, 0x14));
+ printk(KERN_DEBUG " 0x18: 0x%08x | 0x1C: 0x%08x\n", sdhci_readl(host, 0x18), sdhci_readl(host, 0x1C));
+ printk(KERN_DEBUG " -----------------| 0x24: 0x%08x\n", sdhci_readl(host, 0x24));
+ printk(KERN_DEBUG " 0x28: 0x%08x | 0x2C: 0x%08x\n", sdhci_readl(host, 0x28), sdhci_readl(host, 0x2C));
+ printk(KERN_DEBUG " 0x30: 0x%08x | 0x34: 0x%08x\n", sdhci_readl(host, 0x30), sdhci_readl(host, 0x34));
+ printk(KERN_DEBUG " 0x38: 0x%08x | 0x3C: 0x%08x\n", sdhci_readl(host, 0x38), sdhci_readl(host, 0x3C));
+ printk(KERN_DEBUG " 0x40: 0x%08x | 0x44: 0x%08x\n", sdhci_readl(host, 0x40), sdhci_readl(host, 0x44));
+ printk(KERN_DEBUG " 0x48: 0x%08x | 0x4C: 0x%08x\n", sdhci_readl(host, 0x48), sdhci_readl(host, 0x4C));
+ printk(KERN_DEBUG " 0x50: 0x%08x | 0xFC: 0x%08x\n", sdhci_readl(host, 0x50), sdhci_readl(host, 0xFC));
+#endif
+}
+
static void sdhci_dumpregs(struct sdhci_host *host)
{
printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
@@ -591,6 +633,9 @@ static u8 sdhci_calc_timeout(struct sdhc
target_timeout = data->timeout_ns / 1000 +
data->timeout_clks / host->clock;
+ if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+ host->timeout_clk = host->clock / 1000;
+
/*
* Figure out needed cycles.
* We do this in steps in order to fit inside a 32 bit int.
@@ -622,7 +667,7 @@ static u8 sdhci_calc_timeout(struct sdhc
static void sdhci_set_transfer_irqs(struct sdhci_host *host)
{
u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
- u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ACMD12ERR | SDHCI_INT_ADMA_ERROR;
if (host->flags & SDHCI_REQ_USE_DMA)
sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
@@ -652,7 +697,7 @@ static void sdhci_prepare_data(struct sd
count = sdhci_calc_timeout(host, data);
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
host->flags |= SDHCI_REQ_USE_DMA;
/*
@@ -736,11 +781,21 @@ static void sdhci_prepare_data(struct sd
} else {
int sg_cnt;
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), mmc_dev(host->mmc) = %p \n", mmc_dev(host->mmc));
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = %p \n", data->sg);
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg_len = %d \n", data->sg_len);
sg_cnt = dma_map_sg(mmc_dev(host->mmc),
data->sg, data->sg_len,
(data->flags & MMC_DATA_READ) ?
DMA_FROM_DEVICE :
DMA_TO_DEVICE);
+ if (data->sg == NULL) {
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = (NULL) \n");
+ return;
+ }
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), data->sg = %p \n", data->sg);
+ sd_printk("[SDHCI_DEBUG] dma_map_sg(), sg_cnt = %d \n", sg_cnt);
+
if (sg_cnt == 0) {
/*
* This only happens when someone fed
@@ -750,6 +805,7 @@ static void sdhci_prepare_data(struct sd
host->flags &= ~SDHCI_REQ_USE_DMA;
} else {
WARN_ON(sg_cnt != 1);
+ sd_printk("[SDHCI_DEBUG] sg_dma_address() => %08x \n", sg_dma_address(data->sg));
sdhci_writel(host, sg_dma_address(data->sg),
SDHCI_DMA_ADDRESS);
}
@@ -763,14 +819,32 @@ static void sdhci_prepare_data(struct sd
*/
if (host->version >= SDHCI_SPEC_200) {
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+#ifdef SDHCI_USE_LEDS_CLASS
+ ctrl |= SDHCI_CTRL_LED;
+#else
+ ctrl &= ~SDHCI_CTRL_LED;
+#endif
ctrl &= ~SDHCI_CTRL_DMA_MASK;
if ((host->flags & SDHCI_REQ_USE_DMA) &&
(host->flags & SDHCI_USE_ADMA))
ctrl |= SDHCI_CTRL_ADMA32;
else
ctrl |= SDHCI_CTRL_SDMA;
+
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
- }
+ } else if (host->version == SDHCI_SPEC_100) {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+#ifdef SDHCI_USE_LEDS_CLASS
+ ctrl |= SDHCI_CTRL_LED;
+#else
+ ctrl &= ~SDHCI_CTRL_LED;
+#endif
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ ctrl |= SDHCI_CTRL_SDMA;
+
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
int flags;
@@ -795,15 +869,26 @@ static void sdhci_set_transfer_mode(stru
struct mmc_data *data)
{
u16 mode;
+ u8 bgctrl;
if (data == NULL)
return;
WARN_ON(!host->data);
+ bgctrl = sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL);
+ if (host->quirks & SDHCI_QUIRK_READ_WAIT_CTRL)
+ bgctrl |= SDHCI_READ_WAIT_CTRL;
+ sdhci_writeb(host, bgctrl, SDHCI_BLOCK_GAP_CONTROL);
+
mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
+
+ if (data->blocks > 1) {
mode |= SDHCI_TRNS_MULTI;
+
+ if (host->quirks & SDHCI_QUIRK_AUTO_CMD12)
+ mode |= SDHCI_TRNS_ACMD12;
+ }
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
if (host->flags & SDHCI_REQ_USE_DMA)
@@ -812,6 +897,20 @@ static void sdhci_set_transfer_mode(stru
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
}
+static void shdci_check_dma_overrun(struct sdhci_host *host, struct mmc_data *data)
+{
+ u32 dma_pos = sdhci_readl(host, SDHCI_DMA_ADDRESS);
+ u32 dma_start = sg_dma_address(data->sg);
+ u32 dma_end = dma_start + data->sg->length;
+
+ /* Test whether we ended up moving more data than was originally requested. */
+ if (dma_pos <= dma_end)
+ return;
+
+ printk(KERN_ERR "%s: dma overrun, dma %08x, req %08x..%08x\n",
+ mmc_hostname(host->mmc), dma_pos, dma_start, dma_end);
+}
+
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
@@ -825,6 +924,9 @@ static void sdhci_finish_data(struct sdh
if (host->flags & SDHCI_USE_ADMA)
sdhci_adma_table_post(host, data);
else {
+ shdci_check_dma_overrun(host, data);
+
+ sd_printk("[SDHCI_DEBUG] dma_unmap_sg(), data->sg_len = %d \n", data->sg_len);
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, (data->flags & MMC_DATA_READ) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
@@ -866,12 +968,16 @@ static void sdhci_send_command(struct sd
WARN_ON(host->cmd);
+ sd_printk("[SDHCI_DEBUG] sdhci_send_command() \n");
+
/* Wait max 10 ms */
timeout = 10;
mask = SDHCI_CMD_INHIBIT;
if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
mask |= SDHCI_DATA_INHIBIT;
+ if ((cmd->data != NULL))
+ mask |= SDHCI_DATA_INHIBIT;
/* We shouldn't wait for data inihibit for stop commands, even
though they might use busy signaling */
@@ -925,7 +1031,11 @@ static void sdhci_send_command(struct sd
if (cmd->data)
flags |= SDHCI_CMD_DATA;
+ sd_printk("[SDHCI_DEBUG] sdhci_send_command() => %08x \n", SDHCI_MAKE_CMD(cmd->opcode, flags));
+ sdhci_dumpallregs(host);
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+ sd_printk("[SDHCI_DEBUG] sdhci_send_command(): After issue command \n");
+ sdhci_dumpallregs(host);
}
static void sdhci_finish_command(struct sdhci_host *host)
@@ -934,6 +1044,8 @@ static void sdhci_finish_command(struct
BUG_ON(host->cmd == NULL);
+ sd_printk("[SDHCI_DEBUG] sdhci_finish_command() \n");
+
if (host->cmd->flags & MMC_RSP_PRESENT) {
if (host->cmd->flags & MMC_RSP_136) {
/* CRC is stripped so we need to do some shifting. */
@@ -991,8 +1103,8 @@ static void sdhci_set_clock(struct sdhci
clk |= SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
- /* Wait max 10 ms */
- timeout = 10;
+ /* Wait max 20 ms */
+ timeout = 20;
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
@@ -1154,6 +1266,12 @@ static void sdhci_set_ios(struct mmc_hos
else
ctrl &= ~SDHCI_CTRL_HISPD;
+#ifdef SDHCI_USE_LEDS_CLASS
+ ctrl |= SDHCI_CTRL_LED;
+#else
+ ctrl &= ~SDHCI_CTRL_LED;
+#endif
+
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/*
@@ -1321,7 +1439,11 @@ static void sdhci_timeout_timer(unsigned
if (host->mrq) {
printk(KERN_ERR "%s: Timeout waiting for hardware "
"interrupt.\n", mmc_hostname(host->mmc));
+#ifdef SDHCI_DEBUG
+ sdhci_dumpallregs(host);
+#else
sdhci_dumpregs(host);
+#endif
if (host->data) {
host->data->error = -ETIMEDOUT;
@@ -1508,6 +1630,10 @@ static irqreturn_t sdhci_irq(int irq, vo
DBG("*** %s got interrupt: 0x%08x\n",
mmc_hostname(host->mmc), intmask);
+#ifdef SDHCI_DEBUG
+ printk("*** %s got interrupt: 0x%08x\n", mmc_hostname(host->mmc), intmask);
+#endif
+
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
@@ -1597,7 +1723,7 @@ int sdhci_resume_host(struct sdhci_host
{
int ret;
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
}
@@ -1678,23 +1804,20 @@ int sdhci_add_host(struct sdhci_host *ho
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
- host->flags |= SDHCI_USE_DMA;
- else if (!(caps & SDHCI_CAN_DO_DMA))
- DBG("Controller doesn't have DMA capability\n");
+ host->flags |= SDHCI_USE_SDMA;
+ else if (!(caps & SDHCI_CAN_DO_SDMA))
+ DBG("Controller doesn't have SDMA capability\n");
else
- host->flags |= SDHCI_USE_DMA;
+ host->flags |= SDHCI_USE_SDMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
- (host->flags & SDHCI_USE_DMA)) {
+ (host->flags & SDHCI_USE_SDMA)) {
DBG("Disabling DMA as it is marked broken\n");
- host->flags &= ~SDHCI_USE_DMA;
+ host->flags &= ~SDHCI_USE_SDMA;
}
- if (host->flags & SDHCI_USE_DMA) {
- if ((host->version >= SDHCI_SPEC_200) &&
- (caps & SDHCI_CAN_DO_ADMA2))
- host->flags |= SDHCI_USE_ADMA;
- }
+ if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
(host->flags & SDHCI_USE_ADMA)) {
@@ -1702,13 +1825,14 @@ int sdhci_add_host(struct sdhci_host *ho
host->flags &= ~SDHCI_USE_ADMA;
}
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
printk(KERN_WARNING "%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
- host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA);
+ host->flags &=
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
}
}
}
@@ -1736,7 +1860,7 @@ int sdhci_add_host(struct sdhci_host *ho
* mask, but PIO does not need the hw shim so we set a new
* mask here in that case.
*/
- if (!(host->flags & SDHCI_USE_DMA)) {
+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
host->dma_mask = DMA_BIT_MASK(64);
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
}
@@ -1757,13 +1881,15 @@ int sdhci_add_host(struct sdhci_host *ho
host->timeout_clk =
(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
- if (!host->ops->get_timeout_clock) {
+ if (host->ops->get_timeout_clock) {
+ host->timeout_clk = host->ops->get_timeout_clock(host);
+ } else if (!(host->quirks &
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
printk(KERN_ERR
"%s: Hardware doesn't specify timeout clock "
"frequency.\n", mmc_hostname(mmc));
return -ENODEV;
}
- host->timeout_clk = host->ops->get_timeout_clock(host);
}
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
@@ -1772,7 +1898,8 @@ int sdhci_add_host(struct sdhci_host *ho
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- if (host->ops->get_min_clock)
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
+ host->ops->set_clock && host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else
mmc->f_min = host->max_clk / 256;
@@ -1810,7 +1937,7 @@ int sdhci_add_host(struct sdhci_host *ho
*/
if (host->flags & SDHCI_USE_ADMA)
mmc->max_hw_segs = 128;
- else if (host->flags & SDHCI_USE_DMA)
+ else if (host->flags & SDHCI_USE_SDMA)
mmc->max_hw_segs = 1;
else /* PIO */
mmc->max_hw_segs = 128;
@@ -1893,10 +2020,10 @@ int sdhci_add_host(struct sdhci_host *ho
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA)?"A":"",
- (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "SDMA" : "PIO");
sdhci_enable_card_detection(host);
--- /dev/null
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -0,0 +1,313 @@
+/*******************************************************************************
+ *
+ * drivers/mmc/host/sdhci-cns3xxx.c
+ *
+ * SDHCI support for the CNS3XXX SOCs
+ *
+ * Author: Scott Shu
+ *
+ * Copyright (c) 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
+ * visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ *
+ ******************************************************************************/
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+
+#include <mach/sdhci.h>
+#include <mach/pm.h>
+
+#include "sdhci.h"
+
+//#define DEBUG
+
+#define MAX_BUS_CLK (4)
+
+static unsigned __initdata use_dma = 0;
+
+struct sdhci_cns3xxx {
+ struct sdhci_host *host;
+ struct platform_device *pdev;
+ struct resource *ioarea;
+ struct cns3xxx_sdhci_platdata *pdata;
+ struct clk *clk_io;
+ struct clk *clk_bus[MAX_BUS_CLK];
+};
+
+static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
+{
+ int clk = 50000000;
+
+ return clk;
+}
+
+static unsigned int sdhci_cns3xxx_get_timeout_clk(struct sdhci_host *host)
+{
+ return sdhci_cns3xxx_get_max_clk(host) / 100000;
+}
+
+/*
+ * sdhci_cns3xxx_set_clock - callback on clock change
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+ */
+static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+ unsigned long timeout;
+
+ if (clock == host->clock)
+ return;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ goto out;
+#if 1
+ clk = 0x03 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 3 */
+#else
+ /* high speed mode or normal speed mode */
+ if (0x4 & sdhci_readw(host, 0x28)) {
+ clk = 0x03 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 3 */
+ } else {
+ clk = 0x02 << SDHCI_DIVIDER_SHIFT; /* base clock divided by 4 */
+ }
+#endif
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ timeout = 10;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ host->timeout_clk = sdhci_cns3xxx_get_timeout_clk(host);
+out:
+ host->clock = clock;
+}
+
+static struct sdhci_ops sdhci_cns3xxx_ops = {
+ .get_max_clock = sdhci_cns3xxx_get_max_clk,
+ .get_timeout_clock = sdhci_cns3xxx_get_timeout_clk,
+ .set_clock = sdhci_cns3xxx_set_clock,
+};
+
+static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev)
+{
+ struct cns3xxx_sdhci_platdata *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host;
+ struct sdhci_cns3xxx *sc;
+ struct resource *res;
+ int ret, irq;
+
+ if (!pdata) {
+ dev_err(dev, "no device data specified\n");
+ return -ENOENT;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no irq specified\n");
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no memory specified\n");
+ return -ENOENT;
+ }
+
+ host = sdhci_alloc_host(dev, sizeof(*sc));
+ if (IS_ERR(host)) {
+ dev_err(dev, "sdhci_alloc_host() failed\n");
+ return PTR_ERR(host);
+ }
+
+ sc = sdhci_priv(host);
+
+ sc->host = host;
+ sc->pdev = pdev;
+ sc->pdata = pdata;
+
+ platform_set_drvdata(pdev, host);
+
+ sc->ioarea = request_mem_region(res->start, resource_size(res), mmc_hostname(host->mmc));
+ if (!sc->ioarea) {
+ dev_err(dev, "failed to reserve register area\n");
+ ret = -ENXIO;
+ goto err_req_regs;
+ }
+
+ host->ioaddr = ioremap_nocache(res->start, resource_size(res));
+ if (!host->ioaddr) {
+ dev_err(dev, "failed to map registers\n");
+ ret = -ENXIO;
+ goto err_req_regs;
+ }
+
+ host->hw_name = "cns3xxx";
+ host->ops = &sdhci_cns3xxx_ops;
+ host->quirks = 0;
+ host->irq = irq;
+
+ if (use_dma != 1) {
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+ } else {
+ host->quirks |= SDHCI_QUIRK_FORCE_DMA;
+ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+ host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE);
+ host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+ //host->quirks |= SDHCI_QUIRK_FORCE_BLK_SZ_2048;
+ //host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+ host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+ host->quirks |= SDHCI_QUIRK_AUTO_CMD12;
+ host->quirks |= SDHCI_QUIRK_READ_WAIT_CTRL;
+ }
+
+ //host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+
+ host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK;
+
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_err(dev, "sdhci_add_host() failed (%d)\n", ret);
+ goto err_add_host;
+ }
+
+ return 0;
+
+err_add_host:
+ free_irq(host->irq, host);
+ iounmap(host->ioaddr);
+ release_resource(sc->ioarea);
+ kfree(sc->ioarea);
+
+err_req_regs:
+ sdhci_free_host(host);
+
+ return ret;
+}
+
+static int __devexit sdhci_cns3xxx_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct resource *res;
+
+ pr_debug("%s: remove=%p\n", __func__, pdev);
+
+ sdhci_remove_host(host, 0);
+ sdhci_free_host(host);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int sdhci_cns3xxx_suspend(struct platform_device *dev, pm_message_t state)
+{
+
+ return 0;
+}
+
+static int sdhci_cns3xxx_resume(struct platform_device *dev)
+{
+
+ return 0;
+}
+
+#else
+#define sdhci_cns3xxx_suspend NULL
+#define sdhci_cns3xxx_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver sdhci_cns3xxx_driver = {
+ .probe = sdhci_cns3xxx_probe,
+ .remove = __devexit_p(sdhci_cns3xxx_remove),
+ .suspend = sdhci_cns3xxx_suspend,
+ .resume = sdhci_cns3xxx_resume,
+ .driver = {
+ .name = "cns3xxx-sdhci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static char banner[] __initdata = KERN_INFO "cns3xxx-sdhci, (c) 2009 Cavium Networks\n";
+
+static int __init sdhci_cns3xxx_init(void)
+{
+#ifdef CONFIG_SILICON
+ unsigned long gpioapin = __raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0014));;
+#else
+ unsigned long status = __raw_readl((void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0700));
+#endif
+
+ printk(banner);
+
+#ifdef CONFIG_SILICON
+ /* MMC/SD pins share with GPIOA */
+ __raw_writel(gpioapin | (0x1fff0004), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0014));
+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+#else
+ /* insert a delay on SDIO output interface (only for FPGA mode & high-speed mode) */
+ __raw_writel(status | (1 << 4), (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0700));
+#endif
+ return platform_driver_register(&sdhci_cns3xxx_driver);
+}
+
+static void __exit sdhci_cns3xxx_exit(void)
+{
+ platform_driver_unregister(&sdhci_cns3xxx_driver);
+}
+
+module_init(sdhci_cns3xxx_init);
+module_exit(sdhci_cns3xxx_exit);
+
+module_param(use_dma, uint, 0);
+
+MODULE_AUTHOR("Scott Shu");
+MODULE_DESCRIPTION("Cavium Networks CNS3XXX SDHCI glue");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cns3xxx-sdhci");
+
+MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 0");
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -8,6 +8,8 @@
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
+#ifndef __SDHCI_H
+#define __SDHCI_H
#include <linux/scatterlist.h>
#include <linux/compiler.h>
@@ -78,6 +80,7 @@
#define SDHCI_POWER_330 0x0E
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
+#define SDHCI_READ_WAIT_CTRL 0x04
#define SDHCI_WAKE_UP_CONTROL 0x2B
@@ -143,7 +146,7 @@
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
-#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_CAN_DO_SDMA 0x00400000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
@@ -232,6 +235,12 @@ struct sdhci_host {
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
/* Controller needs 10ms delay between applying power and clock */
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+/* Controller uses Auto CMD12 */
+#define SDHCI_QUIRK_AUTO_CMD12 (1<<25)
+/* Controller uses read wait control protocol */
+#define SDHCI_QUIRK_READ_WAIT_CTRL (1<<26)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -250,7 +259,7 @@ struct sdhci_host {
spinlock_t lock; /* Mutex */
int flags; /* Host attributes */
-#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
+#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
@@ -406,3 +415,5 @@ extern void sdhci_remove_host(struct sdh
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
extern int sdhci_resume_host(struct sdhci_host *host);
#endif
+
+#endif /* __SDHCI_H */
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -40,6 +40,8 @@ struct mmc_csd {
};
struct mmc_ext_csd {
+ u8 rev;
+ unsigned int sa_timeout; /* Units: 100ns */
unsigned int hs_max_dtr;
unsigned int sectors;
};
@@ -62,7 +64,8 @@ struct sdio_cccr {
low_speed:1,
wide_bus:1,
high_power:1,
- high_speed:1;
+ high_speed:1,
+ disable_cd:1;
};
struct sdio_cis {
@@ -94,6 +97,8 @@ struct mmc_card {
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+ unsigned int quirks; /* card quirks */
+#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
@@ -129,6 +134,11 @@ struct mmc_card {
#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_LENIENT_FN0;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(
extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
extern void mmc_release_host(struct mmc_host *host);
+extern int mmc_try_claim_host(struct mmc_host *host);
/**
* mmc_claim_host - exclusively claim a host
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -11,6 +11,7 @@
#define LINUX_MMC_HOST_H
#include <linux/leds.h>
+#include <linux/sched.h>
#include <linux/mmc/core.h>
@@ -51,6 +52,35 @@ struct mmc_ios {
};
struct mmc_host_ops {
+ /*
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. 'enable' is called
+ * when the host is claimed and 'disable' is called (or scheduled with
+ * a delay) when the host is released. The 'disable' is scheduled if
+ * the disable delay set by 'mmc_set_disable_delay()' is non-zero,
+ * otherwise 'disable' is called immediately. 'disable' may be
+ * scheduled repeatedly, to permit ever greater power saving at the
+ * expense of ever greater latency to re-enable. Rescheduling is
+ * determined by the return value of the 'disable' method. A positive
+ * value gives the delay in milliseconds.
+ *
+ * In the case where a host function (like set_ios) may be called
+ * with or without the host claimed, enabling and disabling can be
+ * done directly and will nest correctly. Call 'mmc_host_enable()' and
+ * 'mmc_host_lazy_disable()' for this purpose, but note that these
+ * functions must be paired.
+ *
+ * Alternatively, 'mmc_host_enable()' may be paired with
+ * 'mmc_host_disable()' which calls 'disable' immediately. In this
+ * case the 'disable' method will be called with 'lazy' set to 0.
+ * This is mainly useful for error paths.
+ *
+ * Because lazy disable may be called from a work queue, the 'disable'
+ * method must claim the host when 'lazy' != 0, which will work
+ * correctly because recursion is detected and handled.
+ */
+ int (*enable)(struct mmc_host *host);
+ int (*disable)(struct mmc_host *host, int lazy);
void (*request)(struct mmc_host *host, struct mmc_request *req);
/*
* Avoid calling these three functions too often or in a "fast path",
@@ -118,6 +148,9 @@ struct mmc_host {
#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */
+#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
+#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
+#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
@@ -142,9 +175,18 @@ struct mmc_host {
unsigned int removed:1; /* host is being removed */
#endif
+ /* Only used with MMC_CAP_DISABLE */
+ int enabled; /* host is enabled */
+ int nesting_cnt; /* "enable" nesting count */
+ int en_dis_recurs; /* detect recursion */
+ unsigned int disable_delay; /* disable delay in msecs */
+ struct delayed_work disable; /* disabling work */
+
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
+ struct task_struct *claimer; /* task that has host claimed */
+ int claim_cnt; /* "claim" nesting count */
struct delayed_work detect;
@@ -183,6 +225,9 @@ static inline void *mmc_priv(struct mmc_
extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
extern int mmc_resume_host(struct mmc_host *);
+extern void mmc_power_save_host(struct mmc_host *host);
+extern void mmc_power_restore_host(struct mmc_host *host);
+
extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
@@ -197,5 +242,19 @@ struct regulator;
int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit);
+int mmc_card_awake(struct mmc_host *host);
+int mmc_card_sleep(struct mmc_host *host);
+int mmc_card_can_sleep(struct mmc_host *host);
+
+int mmc_host_enable(struct mmc_host *host);
+int mmc_host_disable(struct mmc_host *host);
+int mmc_host_lazy_disable(struct mmc_host *host);
+
+static inline void mmc_set_disable_delay(struct mmc_host *host,
+ unsigned int disable_delay)
+{
+ host->disable_delay = disable_delay;
+}
+
#endif
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -31,6 +31,7 @@
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
+#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
@@ -127,6 +128,7 @@
#define R1_STATUS(x) (x & 0xFFFFE000)
#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
#define R1_APP_CMD (1 << 5) /* sr, c */
/*
@@ -254,6 +256,7 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT 217
/*
* EXT_CSD field definitions
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -67,6 +67,7 @@ struct sdio_func {
#define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
#define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
+#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
/*
* SDIO function device driver
@@ -81,6 +82,8 @@ struct sdio_driver {
struct device_driver drv;
};
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -22,6 +22,12 @@
/*
* Vendors and devices. Sort key: vendor first, device next.
*/
+#define SDIO_VENDOR_ID_INTEL 0x0089
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404
+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405
+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406
#define SDIO_VENDOR_ID_MARVELL 0x02df
#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103