hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
18,462 Commits
1 Branch
0 Tags
128 MiB
C 79%
Makefile 11.1%
Shell 4.7%
Assembly 2.3%
Perl 1.6%
Other 1.2%
 
 
 
 
 
 
Go to file
Gabor Juhos e3647801e9 ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 		2010-10-05 14:10:34 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include [include] correct default package status info (install -> unknown) - fixes "opkg_conf_write_status_files: Internal error: package ... has a NULL dest" 2010-10-04 17:20:49 +00:00
package mac80211: ath9k: get tx gain type from eeprom 2010-10-05 14:10:32 +00:00
scripts [scripts] feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies 2010-10-02 02:37:27 +00:00
target ramips: Allow ethernet interface to be taken down and up again 2010-10-05 14:10:34 +00:00
toolchain [toolchain]: gcc 4.4.5 support 2010-10-04 12:21:58 +00:00
tools tools/sed: update to sed-4.2.1 (also tested on FreeBSD/AMD64) 2010-10-05 13:51:54 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine. 2010-10-03 12:54:07 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
rules.mk [buildroot] drop the usr/ prefix when scanning for libgcc.a 2010-09-12 22:19:29 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org