OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Jo-Philipp Wich de0ca9088d package/ead: fix build dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-03 22:37:02 +00:00
docs [package] hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values 2008-12-31 19:09:26 +00:00
include add MD5 for the kernel 2.6.28 2008-12-25 17:09:30 +00:00
package package/ead: fix build dependency 2009-01-03 22:37:02 +00:00
scripts fix recursive dependencies that might be caused by using conditional dependencies 2009-01-02 02:49:02 +00:00
target [ar71xx] fix compiler warnings in the m25p80 driver on 2.6.28 2009-01-03 15:01:08 +00:00
toolchain [uClibc] enable netlink support 2009-01-03 17:28:58 +00:00
tools [tools] firmware-utils/mkfwimage: add RouterStation support (based on a patch by Jonas <jonas at ubnt.com>) 2008-12-18 13:31:59 +00:00
.gitignore add feeds.conf to .gitignore 2008-09-23 11:06:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Adds support for using a local clone of a git tree 2008-10-10 10:07:45 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile remove toolchain build directory as well in 'make dirclean' 2008-12-03 04:22:41 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default Switched LuCI-SVN to another server 2008-10-16 14:57:50 +00:00
rules.mk fix whitespace order in cflags without CONFIG_DEBUG to prevent breakage in some packages' configure step 2008-09-13 17:41:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org