77 lines
2.3 KiB
Diff
77 lines
2.3 KiB
Diff
From 331294fa5c703536e27b79e9c112d162393f725a Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Thu, 26 Jun 2014 13:55:10 -0500
|
|
Subject: [PATCH 178/182] dmaengine: qcom_adm: Add device tree binding
|
|
|
|
Add device tree binding support for the QCOM ADM DMA driver.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
---
|
|
Documentation/devicetree/bindings/dma/qcom_adm.txt | 60 ++++++++++++++++++++
|
|
1 file changed, 60 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
|
|
@@ -0,0 +1,60 @@
|
|
+QCOM ADM DMA Controller
|
|
+
|
|
+Required properties:
|
|
+- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
|
|
+- reg: Address range for DMA registers
|
|
+- interrupts: Should contain one interrupt shared by all channels
|
|
+- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
|
|
+ denotes CRCI (client rate control interface) flow control assignment.
|
|
+- clocks: Should contain the core clock and interface clock.
|
|
+- clock-names: Must contain "core" for the core clock and "iface" for the
|
|
+ interface clock.
|
|
+- resets: Must contain an entry for each entry in reset names.
|
|
+- reset-names: Must include the following entries:
|
|
+ - clk
|
|
+ - c0
|
|
+ - c1
|
|
+ - c2
|
|
+- qcom,ee: indicates the security domain identifier used in the secure world.
|
|
+
|
|
+Example:
|
|
+ adm_dma: dma@18300000 {
|
|
+ compatible = "qcom,adm";
|
|
+ reg = <0x18300000 0x100000>;
|
|
+ interrupts = <0 170 0>;
|
|
+ #dma-cells = <2>;
|
|
+
|
|
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+
|
|
+ resets = <&gcc ADM0_RESET>,
|
|
+ <&gcc ADM0_C0_RESET>,
|
|
+ <&gcc ADM0_C1_RESET>,
|
|
+ <&gcc ADM0_C2_RESET>;
|
|
+ reset-names = "clk", "c0", "c1", "c2";
|
|
+ qcom,ee = <0>;
|
|
+ };
|
|
+
|
|
+DMA clients must use the format descripted in the dma.txt file, using a three
|
|
+cell specifier for each channel.
|
|
+
|
|
+Each dmas request consists of 3 cells:
|
|
+ 1. phandle pointing to the DMA controller
|
|
+ 2. channel number
|
|
+ 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
|
|
+
|
|
+Example:
|
|
+
|
|
+ spi4: spi@1a280000 {
|
|
+ status = "ok";
|
|
+ spi-max-frequency = <50000000>;
|
|
+
|
|
+ pinctrl-0 = <&spi_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ cs-gpios = <&qcom_pinmux 20 0>;
|
|
+
|
|
+ dmas = <&adm_dma 6 9>,
|
|
+ <&adm_dma 5 10>;
|
|
+ dma-names = "rx", "tx";
|
|
+ };
|