wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Florian Fainelli d9eabaa6da [package] prefer the cs5535 gpiolib driver after 2.6.32 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23728 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-10-30 22:35:54 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	Lock copying to STAGING_DIR_ROOT. This fixes build failures for parallelized build.	2010-10-29 15:07:23 +00:00
package	[package] prefer the cs5535 gpiolib driver after 2.6.32	2010-10-30 22:35:54 +00:00
scripts	[feeds] add support for darcs-based feeds	2010-10-24 12:36:51 +00:00
target	[x86] resync config-default, enable gpio support	2010-10-30 22:35:50 +00:00
toolchain	[toolchain/gcc]: remove unneeded config options, too	2010-10-29 10:55:54 +00:00
tools	add a stripped down (and portable) version of flock to the host tools	2010-10-29 13:39:18 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	…
Config.in	as we only support 2.6, remove the useless bool for it	2010-10-05 14:19:00 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	Add macro for locking of recipe commands.	2010-10-29 14:53:16 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org