hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
32,934 Commits
1 Branch
0 Tags
128 MiB
C 79%
Makefile 11.1%
Shell 4.7%
Assembly 2.3%
Perl 1.6%
Other 1.2%
 
 
 
 
 
 
Go to file
John Crispin d8e190575f ralink: fix hw status almost full not work on mt7620 and mt7621 
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.

mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?

Signed-off-by: michael lee <igvtee@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 		2015-02-09 19:34:49 +00:00
config config: remove CONFIG_BUILD_STATIC_TOOLS 2015-02-06 00:00:51 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include base-files: taint the build if the override mechanism is used 2015-02-09 12:10:07 +00:00
package kernel: add missing symbol to realtek wifi 2015-02-09 18:15:30 +00:00
scripts build: propagate override information to .config file 2015-02-09 12:09:43 +00:00
target ralink: fix hw status almost full not work on mt7620 and mt7621 2015-02-09 19:34:49 +00:00
toolchain eglibc: mark 2.15 as broken it is effected by CVE-2015-0235 2015-01-28 12:06:05 +00:00
tools tools: remove static linking support 2015-02-06 00:00:43 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile Revert "build: use ONESHELL to speed up scanning and the toplevel makefile" 2014-10-22 10:47:26 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default Move telephony feed to github 2014-12-11 10:30:51 +00:00
rules.mk rules.mk: use relative paths for BASH, TAR, FIND, PATCH, PYTHON 2015-02-06 12:35:36 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org