wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Felix Fietkau d7b4f4aec1 ncurses: make sure the timestamp of copied host utils is current, so that it doesn't fall back to attempting to use cross-compiled ones git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14912 3c298f89-4303-0410-b956-a3cf2f4a3e73		2009-03-17 04:17:21 +00:00
docs	…
include	fix quilt variable and stampfile usage for host builds	2009-03-17 03:21:52 +00:00
package	ncurses: make sure the timestamp of copied host utils is current, so that it doesn't fall back to attempting to use cross-compiled ones	2009-03-17 04:17:21 +00:00
scripts	move host build in packages into a separate namespace: package/<name>/host/<target>	2009-03-17 02:20:34 +00:00
target	s3c24xx: unbreak uclibc by using armv4t instead of armv4; optimize for the right cpu	2009-03-16 23:37:46 +00:00
toolchain	…
tools	…
.gitignore	…
BSDmakefile	…
Config.in	…
LICENSE	…
Makefile	…
README	…
feeds.conf.default	…
rules.mk	…

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org