OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Steven Barth d1afb91198 6relayd: various updates & fixes
- Add RD- and DHCPv6-server functionality
	- Rework configuration and add example UCI file
	- Fix various bugs and be more RFC compliant

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-16 09:27:56 +00:00
docs [docs] update switch documentation 2012-10-12 12:13:56 +00:00
include buildroot: isolate the .install stamp files for build variants (#12279) 2012-11-07 16:15:22 +00:00
package 6relayd: various updates & fixes 2012-11-16 09:27:56 +00:00
scripts scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh 2012-11-14 14:18:33 +00:00
target brcm47xx: revert r33935: check for .ELF header in partition parser 2012-11-15 16:39:45 +00:00
toolchain [toolchain] uClibc: backport a fix for dlsym(RTLD_NEXT, ...) use 2012-11-11 16:10:50 +00:00
tools firmware-utils/mktplinkfw: add support for TL-WA7510N 2012-11-13 14:48:02 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in [buildroot] hide C++ standard library selection behind INSTALL_LIBSTDCPP 2012-10-24 13:05:07 +00:00
LICENSE
Makefile Makefile: add a check to bail out early when the path to the openwrt directory contains spaces (#12344) 2012-10-21 02:00:11 +00:00
README
feeds.conf.default
rules.mk build: rework the package/install step - collect package install lists during package/compile, then install all packages at once 2012-10-06 16:01:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org