OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Michael Büsch d139045e9b bcm47xx: Port usb fixes to .30
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-06 20:25:11 +00:00
docs [package] configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include now that $(BOARD) is part of the opkg ARCH, there's no reason to keep the board name around in kmod-* package versions anymore 2009-09-06 17:26:37 +00:00
package move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well 2009-09-06 17:36:01 +00:00
scripts scripts/feeds: fix an error message 2009-08-31 14:28:24 +00:00
target bcm47xx: Port usb fixes to .30 2009-09-06 20:25:11 +00:00
toolchain uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a 2009-08-29 11:56:27 +00:00
tools [tools] build fixes for squashfs4 on cygwin 2009-08-27 19:47:13 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in do not forcibly disable stripping when selecting CONFIG_DEBUG, debugging symbols can be useful even if they are not put on the device (e.g. remote cross-gdb) 2009-09-06 19:56:54 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default [feeds] switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages 2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org