280 lines
8.2 KiB
C
280 lines
8.2 KiB
C
/*
|
|
* Carsten Langgaard, carstenl@mips.com
|
|
* Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
|
|
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
|
|
*
|
|
* This program is free software; you can distribute it and/or modify it
|
|
* under the terms of the GNU General Public License (Version 2) as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
*/
|
|
|
|
/* FIXME: convert nasty volatile register derefs to readl/writel calls */
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/paccess.h>
|
|
#include <asm/amazon/irq.h>
|
|
#include <asm/amazon/amazon.h>
|
|
|
|
#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr))
|
|
#ifndef AMAZON_PCI_MEM_BASE
|
|
#define AMAZON_PCI_MEM_BASE 0xb2000000
|
|
#endif
|
|
#define AMAZON_PCI_MEM_SIZE 0x00400000
|
|
#define AMAZON_PCI_IO_BASE 0xb2400000
|
|
#define AMAZON_PCI_IO_SIZE 0x00200000
|
|
|
|
#define AMAZON_PCI_CFG_BUSNUM_SHF 16
|
|
#define AMAZON_PCI_CFG_DEVNUM_SHF 11
|
|
#define AMAZON_PCI_CFG_FUNNUM_SHF 8
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
static struct resource pci_io_resource = {
|
|
.name = "io pci IO space",
|
|
#if 1
|
|
.start = AMAZON_PCI_IO_BASE,
|
|
.end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1,
|
|
#else
|
|
.start = 0,
|
|
.end = 0x00002000 - 1,
|
|
#endif
|
|
.flags = IORESOURCE_IO
|
|
};
|
|
|
|
static struct resource pci_mem_resource = {
|
|
.name = "ext pci memory space",
|
|
.start = AMAZON_PCI_MEM_BASE,
|
|
.end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM
|
|
};
|
|
|
|
static int amazon_pci_config_access(unsigned char access_type,
|
|
struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
|
|
{
|
|
unsigned long flags;
|
|
u32 pci_addr;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Amazon support slot from 0 to 15 */
|
|
/* devfn 0 & 0x20 is itself */
|
|
if ((bus->number != 0) || (devfn > 0x7f) || (devfn == 0) || (devfn == 0x20))
|
|
return 1;
|
|
|
|
local_irq_save(flags);
|
|
|
|
pci_addr = AMAZON_PCI_CFG_BASE |
|
|
bus->number << AMAZON_PCI_CFG_BUSNUM_SHF |
|
|
devfn << AMAZON_PCI_CFG_FUNNUM_SHF |
|
|
(where & ~0x3);
|
|
|
|
if (access_type == PCI_ACCESS_WRITE)
|
|
{
|
|
#ifdef CONFIG_SWAP_IO_SPACE
|
|
val = swab32(*data);
|
|
#endif
|
|
ret = put_dbe(val, (u32 *)pci_addr);
|
|
} else {
|
|
ret = get_dbe(val, (u32 *)pci_addr);
|
|
#ifdef CONFIG_SWAP_IO_SPACE
|
|
*data = swab32(val);
|
|
#else
|
|
*data = val;
|
|
#endif
|
|
}
|
|
|
|
amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
|
|
amazon_writel(amazon_readl(STATUS_COMMAND_ADDR), STATUS_COMMAND_ADDR);
|
|
amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
|
|
mb();
|
|
local_irq_restore(flags);
|
|
|
|
if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
|
|
return 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (size == 1)
|
|
*val = (data >> ((where & 3) << 3)) & 0xff;
|
|
else if (size == 2)
|
|
*val = (data >> ((where & 3) << 3)) & 0xffff;
|
|
else
|
|
*val = data;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
|
|
static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (size == 4)
|
|
{
|
|
data = val;
|
|
} else {
|
|
if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (size == 1)
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
else if (size == 2)
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
}
|
|
|
|
if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops amazon_pci_ops = {
|
|
amazon_pci_read,
|
|
amazon_pci_write
|
|
};
|
|
|
|
static struct pci_controller amazon_pci_controller = {
|
|
.pci_ops = &amazon_pci_ops,
|
|
.mem_resource = &pci_mem_resource,
|
|
.mem_offset = 0x00000000UL,
|
|
.io_resource = &pci_io_resource,
|
|
.io_offset = 0x00000000UL,
|
|
};
|
|
|
|
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
switch (slot) {
|
|
case 13:
|
|
/* IDSEL = AD29 --> USB Host Controller */
|
|
return INT_NUM_IM2_IRL15;
|
|
case 14:
|
|
/* IDSEL = AD30 --> mini PCI connector */
|
|
return INT_NUM_IM2_IRL14;
|
|
default:
|
|
printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
switch(dev->irq) {
|
|
case INT_NUM_IM2_IRL15:
|
|
/*
|
|
* IDSEL = AD29 --> USB Host Controller
|
|
* PCI_INTA/B/C--GPIO Port0.2--EXIN3
|
|
* IN/ALT0:1 ALT1:0
|
|
* PULL UP
|
|
*/
|
|
(*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb;
|
|
(*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4;
|
|
(*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb;
|
|
(*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4;
|
|
(*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4;
|
|
//External Interrupt Node
|
|
(*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */
|
|
(*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
break;
|
|
case INT_NUM_IM2_IRL14:
|
|
/*
|
|
* IDSEL = AD30 --> mini PCI connector
|
|
* PCI_INTA--GPIO Port0.1--EXIN2
|
|
* IN/ALT0:1 ALT1:0
|
|
* PULL UP
|
|
*/
|
|
(*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd;
|
|
(*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2;
|
|
(*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd;
|
|
(*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2;
|
|
(*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2;
|
|
//External Interrupt Node
|
|
(*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600;
|
|
(*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4;
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int __init amazon_pci_init(void)
|
|
{
|
|
u32 temp_buffer;
|
|
|
|
#ifdef CONFIG_SWAP_IO_SPACE
|
|
AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28);
|
|
wmb();
|
|
#endif
|
|
|
|
AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit);
|
|
amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
|
|
|
|
AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT);
|
|
|
|
temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR);
|
|
temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT);
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS);
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS);
|
|
|
|
/* flash */
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS);
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS);
|
|
|
|
/* external master */
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS);
|
|
temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS);
|
|
|
|
AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer;
|
|
wmb();
|
|
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000;
|
|
AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000;
|
|
|
|
AMAZON_PCI_REG32(BAR11_MASK) = 0x0c000008;
|
|
AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0;
|
|
AMAZON_PCI_REG32(BAR1_ADDR) = 0x0;
|
|
amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
|
|
//use 8 dw burse length
|
|
AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303;
|
|
|
|
amazon_pci_controller.io_map_base = (unsigned long)ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE - 1);
|
|
register_pci_controller(&amazon_pci_controller);
|
|
return 0;
|
|
}
|
|
arch_initcall(amazon_pci_init);
|