wifipineapple-openwrt/package/uboot-lantiq/patches/100-ifx_targets.patch

133 lines
4.9 KiB
Diff

--- a/MAKEALL
+++ b/MAKEALL
@@ -730,6 +730,12 @@ LIST_arm=" \
## MIPS Systems (default = big endian)
#########################################################################
+LIST_ifxcpe=" \
+ easy50712 \
+ easy50712_DDR166M \
+ easy50712_DDR166M_ramboot \
+"
+
LIST_mips4kc=" \
incaip \
qemu_mips \
@@ -761,6 +767,7 @@ LIST_au1xx0=" \
"
LIST_mips=" \
+ ${LIST_ifxcpe} \
${LIST_mips4kc} \
${LIST_mips5kc} \
${LIST_au1xx0} \
--- a/Makefile
+++ b/Makefile
@@ -447,7 +447,7 @@ $(obj)include/autoconf.mk: $(obj)include
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+ sed -n -f tools/scripts/define2mk.sed |sort > $@.tmp && \
mv $@.tmp $@
#########################################################################
@@ -3370,7 +3370,7 @@ incaip_config: unconfig
{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 150MHz system clock" ; \
}
- @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
+ @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip infineon
tb0229_config: unconfig
@$(MKCONFIG) $(@:_config=) mips mips tb0229
@@ -3411,6 +3411,50 @@ vct_platinumavc_onenand_small_config: un
@$(MKCONFIG) -a vct mips mips vct micronas
#########################################################################
+## MIPS32 ifxcpe
+#########################################################################
+
+easy50712%config : unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/infineon/easy50712
+ @[ -z "$(findstring ramboot,$@)" ] || \
+ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50712/config.tmp ; \
+ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
+ $(XECHO) "... with ramboot configuration" ; \
+ }
+ @if [ "$(findstring _DDR,$@)" ] ; then \
+ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \
+ DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \
+ case "$${DDR}" in \
+ 111M|166M|e111M|e166M|promos400|samsung166|psc166) \
+ $(XECHO) "... with DDR RAM config $${DDR}" ; \
+ echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \
+ *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \
+ esac; \
+ fi
+ @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50712 infineon danube
+
+easy50812%config : unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/infineon/easy50812
+ @[ -z "$(findstring ramboot,$@)" ] || \
+ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50812/config.tmp ; \
+ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
+ $(XECHO) "... with ramboot configuration" ; \
+ }
+ @if [ "$(findstring _DDR,$@)" ] ; then \
+ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \
+ DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \
+ case "$${DDR}" in \
+ 111M|166M|e111M|e166M|promos400|samsung166|psc166) \
+ $(XECHO) "... with DDR RAM config $${DDR}" ; \
+ echo "#define CONFIG_USE_DDR_RAM_CFG_$${DDR}" >>$(obj)include/config.h ;; \
+ *) $(XECHO) "... DDR RAM config \\\"$${DDR}\\\" unknown, use default"; \
+ esac; \
+ fi
+ @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips easy50812 infineon ar9
+
+#########################################################################
## MIPS32 AU1X00
#########################################################################
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
+COBJS-$(CONFIG_IFX_ETOP) += ifx_etop.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o
COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libserial.a
COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
+COBJS-$(CONFIG_IFX_ASC) += ifx_asc.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -57,6 +57,7 @@ int fecmxc_initialize (bd_t *bis);
int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
+int ifx_etop_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
int kirkwood_egiga_initialize(bd_t *bis);
int lan91c96_initialize(u8 dev_num, int base_addr);
@@ -85,6 +86,7 @@ int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int sh_eth_initialize(bd_t *bis);
int dm9000_initialize(bd_t *bis);
+int lq_eth_initialize(bd_t * bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.