162 lines
3.9 KiB
Diff
162 lines
3.9 KiB
Diff
From b6d5d4c3d595b4cfb6a052ac7151fdb1d9a776ea Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Sun, 27 Jul 2014 09:58:09 +0100
|
|
Subject: [PATCH 44/57] mtd: add chunked read io to m25p80
|
|
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
---
|
|
drivers/mtd/devices/m25p80.c | 128 ++++++++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 128 insertions(+)
|
|
|
|
--- a/drivers/mtd/devices/m25p80.c
|
|
+++ b/drivers/mtd/devices/m25p80.c
|
|
@@ -562,6 +562,58 @@ static int m25p80_read(struct mtd_info *
|
|
return 0;
|
|
}
|
|
|
|
+static int m25p80_read_chunked(struct mtd_info *mtd, loff_t from, size_t len,
|
|
+ size_t *retlen, u_char *buf)
|
|
+{
|
|
+ struct m25p *flash = mtd_to_m25p(mtd);
|
|
+ struct spi_transfer t[2];
|
|
+ struct spi_message m;
|
|
+ uint8_t opcode;
|
|
+ int idx = 0;
|
|
+
|
|
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
|
|
+ __func__, (u32)from, len);
|
|
+
|
|
+ spi_message_init(&m);
|
|
+ memset(t, 0, (sizeof t));
|
|
+
|
|
+ t[0].tx_buf = flash->command;
|
|
+ t[0].len = m25p_cmdsz(flash);
|
|
+ spi_message_add_tail(&t[0], &m);
|
|
+ spi_message_add_tail(&t[1], &m);
|
|
+
|
|
+ *retlen = 0;
|
|
+
|
|
+ while (idx < len) {
|
|
+ int rlen = (len - idx > 4) ? (4) : (len - idx);
|
|
+
|
|
+ t[1].rx_buf = &buf[idx];
|
|
+ t[1].len = rlen;
|
|
+
|
|
+ mutex_lock(&flash->lock);
|
|
+
|
|
+ /* Wait till previous write/erase is done. */
|
|
+ if (wait_till_ready(flash)) {
|
|
+ /* REVISIT status return?? */
|
|
+ mutex_unlock(&flash->lock);
|
|
+ return 1;
|
|
+ }
|
|
+
|
|
+ /* Set up the write data buffer. */
|
|
+ opcode = OPCODE_NORM_READ;
|
|
+ flash->command[0] = opcode;
|
|
+ m25p_addr2cmd(flash, from + idx, flash->command);
|
|
+
|
|
+ spi_sync(flash->spi, &m);
|
|
+
|
|
+ *retlen += m.actual_length - m25p_cmdsz(flash);
|
|
+
|
|
+ mutex_unlock(&flash->lock);
|
|
+ idx += rlen;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
/*
|
|
* Write an address range to the flash chip. Data must be written in
|
|
* FLASH_PAGESIZE chunks. The address range may be any size provided
|
|
@@ -649,6 +701,76 @@ static int m25p80_write(struct mtd_info
|
|
return 0;
|
|
}
|
|
|
|
+static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len,
|
|
+ size_t *retlen, const u_char *buf)
|
|
+{
|
|
+ struct m25p *flash = mtd_to_m25p(mtd);
|
|
+ struct spi_transfer t;
|
|
+ struct spi_message m;
|
|
+ u32 i, page_size;
|
|
+ u8 tmp[8];
|
|
+
|
|
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
|
|
+ __func__, (u32)to, len);
|
|
+
|
|
+ spi_message_init(&m);
|
|
+ memset(&t, 0, (sizeof t));
|
|
+
|
|
+ t.tx_buf = tmp;
|
|
+ t.len = 8;
|
|
+ spi_message_add_tail(&t, &m);
|
|
+
|
|
+ mutex_lock(&flash->lock);
|
|
+
|
|
+ /* Wait until finished previous write command. */
|
|
+ if (wait_till_ready(flash)) {
|
|
+ mutex_unlock(&flash->lock);
|
|
+ return 1;
|
|
+ }
|
|
+
|
|
+ write_enable(flash);
|
|
+
|
|
+ /* Set up the opcode in the write buffer. */
|
|
+ flash->command[0] = OPCODE_PP;
|
|
+ m25p_addr2cmd(flash, to, flash->command);
|
|
+
|
|
+ t.len = 4 + (to & 0x3);
|
|
+ if (t.len == 4)
|
|
+ t.len = 8;
|
|
+ memcpy(tmp, flash->command, 4);
|
|
+ memcpy(&tmp[4], buf, t.len - 4);
|
|
+ spi_sync(flash->spi, &m);
|
|
+ page_size = t.len - 4;
|
|
+
|
|
+ *retlen = m.actual_length - m25p_cmdsz(flash);
|
|
+
|
|
+ /* write everything in flash->page_size chunks */
|
|
+ for (i = page_size; i < len; i += page_size) {
|
|
+ page_size = len - i;
|
|
+ if (page_size > 4)
|
|
+ page_size = 4;
|
|
+
|
|
+ /* write the next page to flash */
|
|
+ m25p_addr2cmd(flash, to + i, flash->command);
|
|
+
|
|
+ memcpy(tmp, flash->command, 4);
|
|
+ memcpy(&tmp[4], buf + i, page_size);
|
|
+ t.len = 4 + page_size;
|
|
+
|
|
+ wait_till_ready(flash);
|
|
+
|
|
+ write_enable(flash);
|
|
+
|
|
+ spi_sync(flash->spi, &m);
|
|
+
|
|
+ *retlen += m.actual_length - m25p_cmdsz(flash);
|
|
+ }
|
|
+
|
|
+ mutex_unlock(&flash->lock);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
|
|
size_t *retlen, const u_char *buf)
|
|
{
|
|
@@ -1260,6 +1382,12 @@ static int m25p_probe(struct spi_device
|
|
return -EINVAL;
|
|
}
|
|
|
|
+ if (np && of_property_read_bool(np, "m25p,chunked-io")) {
|
|
+ dev_warn(&spi->dev, "using chunked io\n");
|
|
+ flash->mtd._read = m25p80_read_chunked;
|
|
+ flash->mtd._write = m25p80_write_chunked;
|
|
+ }
|
|
+
|
|
flash->program_opcode = OPCODE_PP;
|
|
|
|
if (info->addr_width)
|