167 lines
4.2 KiB
Diff
167 lines
4.2 KiB
Diff
Adds AM33XX MMC support for am335x-bone, am335x-evm and am335x-evmsk boards.
|
|
|
|
Also added is the DMA binding definitions based on the generic DMA request
|
|
binding.
|
|
|
|
Additional changes made to DTS:
|
|
* Interrupt, reg and compatible properties added
|
|
* ti,needs-special-hs-handling added
|
|
|
|
Signed-off-by: Matt Porter <mporter@ti.com>
|
|
Acked-by: Tony Lindgren <tony@atomide.com>
|
|
Signed-off-by: Joel Fernandes <joelf@ti.com>
|
|
|
|
---
|
|
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 26 ++++++++++++++-
|
|
arch/arm/boot/dts/am335x-bone.dts | 11 +++++++
|
|
arch/arm/boot/dts/am335x-evm.dts | 7 ++++
|
|
arch/arm/boot/dts/am335x-evmsk.dts | 7 ++++
|
|
arch/arm/boot/dts/am33xx.dtsi | 38 ++++++++++++++++++++++
|
|
5 files changed, 88 insertions(+), 1 deletion(-)
|
|
|
|
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
|
|
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
|
|
@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual vol
|
|
ti,non-removable: non-removable slot (like eMMC)
|
|
ti,needs-special-reset: Requires a special softreset sequence
|
|
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
|
|
+dmas: List of DMA specifiers with the controller specific format
|
|
+as described in the generic DMA client binding. A tx and rx
|
|
+specifier is required.
|
|
+dma-names: List of DMA request names. These strings correspond
|
|
+1:1 with the DMA specifiers listed in dmas. The string naming is
|
|
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
|
|
+
|
|
+Examples:
|
|
+
|
|
+[hwmod populated DMA resources]
|
|
+
|
|
+ mmc1: mmc@0x4809c000 {
|
|
+ compatible = "ti,omap4-hsmmc";
|
|
+ reg = <0x4809c000 0x400>;
|
|
+ ti,hwmods = "mmc1";
|
|
+ ti,dual-volt;
|
|
+ bus-width = <4>;
|
|
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
|
|
+ ti,non-removable;
|
|
+ };
|
|
+
|
|
+[generic DMA request binding]
|
|
|
|
-Example:
|
|
mmc1: mmc@0x4809c000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x4809c000 0x400>;
|
|
@@ -30,4 +51,7 @@ Example:
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vmmc>; /* phandle to regulator node */
|
|
ti,non-removable;
|
|
+ dmas = <&edma 24
|
|
+ &edma 25>;
|
|
+ dma-names = "tx", "rx";
|
|
};
|
|
--- a/arch/arm/boot/dts/am335x-bone.dts
|
|
+++ b/arch/arm/boot/dts/am335x-bone.dts
|
|
@@ -9,3 +9,14 @@
|
|
|
|
#include "am33xx.dtsi"
|
|
#include "am335x-bone-common.dtsi"
|
|
+
|
|
+&ldo3_reg {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-always-on;
|
|
+};
|
|
+
|
|
+&mmc1 {
|
|
+ status = "okay";
|
|
+ vmmc-supply = <&ldo3_reg>;
|
|
+};
|
|
--- a/arch/arm/boot/dts/am335x-evm.dts
|
|
+++ b/arch/arm/boot/dts/am335x-evm.dts
|
|
@@ -477,6 +477,8 @@
|
|
};
|
|
|
|
vmmc_reg: regulator@12 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
@@ -517,3 +519,8 @@
|
|
ti,adc-channels = <4 5 6 7>;
|
|
};
|
|
};
|
|
+
|
|
+&mmc1 {
|
|
+ status = "okay";
|
|
+ vmmc-supply = <&vmmc_reg>;
|
|
+};
|
|
--- a/arch/arm/boot/dts/am335x-evmsk.dts
|
|
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
|
|
@@ -393,6 +393,8 @@
|
|
};
|
|
|
|
vmmc_reg: regulator@12 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
@@ -419,3 +421,8 @@
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
phy-mode = "rgmii-txid";
|
|
};
|
|
+
|
|
+&mmc1 {
|
|
+ status = "okay";
|
|
+ vmmc-supply = <&vmmc_reg>;
|
|
+};
|
|
--- a/arch/arm/boot/dts/am33xx.dtsi
|
|
+++ b/arch/arm/boot/dts/am33xx.dtsi
|
|
@@ -240,6 +240,44 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ mmc1: mmc@48060000 {
|
|
+ compatible = "ti,omap4-hsmmc";
|
|
+ ti,hwmods = "mmc1";
|
|
+ ti,dual-volt;
|
|
+ ti,needs-special-reset;
|
|
+ ti,needs-special-hs-handling;
|
|
+ dmas = <&edma 24
|
|
+ &edma 25>;
|
|
+ dma-names = "tx", "rx";
|
|
+ interrupts = <64>;
|
|
+ interrupt-parent = <&intc>;
|
|
+ reg = <0x48060000 0x1000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ mmc2: mmc@481d8000 {
|
|
+ compatible = "ti,omap4-hsmmc";
|
|
+ ti,hwmods = "mmc2";
|
|
+ ti,needs-special-reset;
|
|
+ dmas = <&edma 2
|
|
+ &edma 3>;
|
|
+ dma-names = "tx", "rx";
|
|
+ interrupts = <28>;
|
|
+ interrupt-parent = <&intc>;
|
|
+ reg = <0x481d8000 0x1000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ mmc3: mmc@47810000 {
|
|
+ compatible = "ti,omap4-hsmmc";
|
|
+ ti,hwmods = "mmc3";
|
|
+ ti,needs-special-reset;
|
|
+ interrupts = <29>;
|
|
+ interrupt-parent = <&intc>;
|
|
+ reg = <0x47810000 0x1000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
wdt2: wdt@44e35000 {
|
|
compatible = "ti,omap3-wdt";
|
|
ti,hwmods = "wd_timer2";
|