OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau c857936b93 fix missing package compile/installation issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11 18:48:37 +00:00
docs fix a small dep bug in the docs/ dir 2008-06-09 15:38:23 +00:00
include upgrade to 2.6.25.6 2008-06-11 11:38:39 +00:00
package Add syskonnect yukon2 support (#2568) 2008-06-11 15:51:23 +00:00
scripts fix missing package compile/installation issue 2008-06-11 18:48:37 +00:00
target Use 2.6.25 for rdc321x 2008-06-11 16:38:37 +00:00
toolchain finally fixes etrax toolchain problems, thanks nbd 2008-06-06 20:12:05 +00:00
tools Added lua (lua host bytecode-compiler) to tools/ 2008-05-30 18:38:14 +00:00
.gitignore update svn:ignore and .gitignore 2008-06-06 19:04:01 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine 2008-06-09 15:38:45 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf Switched xwrt url in feeds.conf (berlios http falls over occasionally) 2008-03-02 22:07:46 +00:00
rules.mk adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org