OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Imre Kaloz c82aa42db6 cleanup toolchain version handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 13:55:00 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include fixup board specific KERNELNAME overrides 2011-01-27 12:21:10 +00:00
package [package/busybox]: we don't support gcc 4.5.0 2011-01-27 13:31:56 +00:00
scripts mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus 2011-01-16 01:25:06 +00:00
target [target/generic/mips]: we don't support gcc 4.1.x 2011-01-27 13:33:53 +00:00
toolchain cleanup toolchain version handling 2011-01-27 13:55:00 +00:00
tools cleanup toolchain version handling 2011-01-27 13:55:00 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile
Config.in 2.6.38 supports xz ramdisks, too 2011-01-24 06:41:11 +00:00
LICENSE
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
rules.mk mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus 2011-01-16 01:25:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org